Windows 10 cannot be activated after upgrade from Windows 7 SP1

I recently tried to upgrade my G62 from Windows 7 to Windows 10. During the regular upgrade, my laptop was shut down - which forced me to use Windows media creator from my flash drive.I was able to install it successfully but for some reason I get an error that my OS cannot be validated.I have my original Windows 7 S/N and validation key.Any help will be appreciatedAssaf

Reinstall W7 using HP recvovery media and then do the upgrade again. You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
  .   

Similar Messages

  • My ipad will not stay activated after upgrading from version 7 to version 8.

    After upgrading from version 7 to version8 I cannot keep my ipad activated.  I have tried online tech support and visited an Apple store with no one able to tell me what is happening.  Some said it might be had ware problems.  Other say it might be software problems.  With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems.  any feed back from anyone.

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • Cannot view messages after upgrade from SP07 to SP10

    Hi,
    we are facing now problem with ITSM - after upgrade, because of our oversight, roles for ITSM was overwriten by new versions, and when user logs into ITSM, it cannot write and even see any tickets.
    Only one error message is showing - No authorisation object B_NOTIF_IB
    What should we do in this situation?
    After giving SAP_ALL profile, user can open ticket by entering its number, but list with this numbers is still gone.

    Apologies, my mistake
    please check the steps below as on the links below
    Go to SA 38
    Enter RDSWP_NOTIF_CREATE_CUSTOMIZE_S
    Click Execute
    Select the field group Component
    Check the Output checkbox
    Enter the default value in the Input Value field
    Click Save
    Setting up Defaults in NOTIF_CREATE (creating an incident message)
    Defaults in Support Messages - how to set them up ?

  • Mail flow problem after upgrade from cu1 to sp1

    I have update Exchange server 2013 CU1 to SP1 (CAS Role). After upgrade mail cannot flow. all the mail are stuck.
    CAS server use to mail flow outside and receive from outside. but The problem is this CAS server mail flow not work after upgrade exchange server 2013 CU1 to SP1.
    Please give suggest.
    Thanks

    I didn't connect to queue viewer as because the version of exchange 2013 server are different. in the environment two CAS server and two Mailbox server. i just update one CAS server into SP1. and another CAS in CU3. Mailbox 01 is CU3 and Mailbox 02 is CU
    1. So their is version difference in the environment.
    So, when i update CAS server to SP1. That server is not working for mail flow.
    Please suggest.

  • Problems after upgrade from SCVMM 2012 Sp1 to SCVMM 2012 R2

    I did a in-place (uninstall VMM2012 Sp1, retain the database, and install VMM2012 R2 point to old database) upgrade. All the steps work fine.
    The only problem (so far) is that when I create a new VM using a custom template (for example, Windows 2008 R2), the deploy fail with the following error:
    Error (2912)
    An internal error has occurred trying to contact the vm-scvmm2012.domain.com server: NO_PARAM: NO_PARAM.
    WinRM: URL: [http://vm-scvmm2012.domain.com:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={56B8E488-5DB9-4CC1-BEFA-AFF76E1E4D2D}]
    Unknown error (0x80072f0d)
    Recommended Action
    Check that WS-Management service is installed and running on server vm-scvmm2012.domain.com. For more information use the command "winrm helpmsg hresult". If vm-scvmm2012.domain.com is a host/library/update server or a PXE server role then ensure
    that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
    Information (26278)
    VMM could not offload transfer the file \\vm-scvmm2012.domain.com\MSSCVMMLibrary\VHDs\Template_Windows_2008_R2_SP1.vhdx to C:\ClusterStorage\Volume1\VM-NEWVM\Template_Windows_2008_R2_SP1.vhdx.
    Any ideas?

    I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
    is happening. All Agents are up to date.
    I can migrate VMs in the cluster no problem.
    I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
    Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
    How can we fix this?

  • Cannot access mail after upgrading from tiger to leopard

    When I accessed Mail from applications after installing leopard I received the following message "You cannot use this version of the application Mail with this version of MacOSX" any advice please?

    Hello Hannah:
    Welcome to Apple discussions.
    I think we need a bit more information.
    What method did you use to upgrade?
    What Mail level is on your system (highlight the Mail icon in your application folder and then +"get info.")+
    Barry

  • SMS_Exec service crashing repeatedly after upgrade from SCCM 2012 SP1 to 2012R2

    SCCM 2012R2 is running on 2008R2 in the primary site. After the upgrade to R2 we noticed that none of the stats or collection memberships were updating. We also couldn't manually run summerization on any deployments.
    We started digging through logs and looking at some of the threads on there with similar issues but couldn't see any issues with inbox contents or any of the other suggested fixes. We tried repairing .NET but that didn't help. 
    If anyone can help guide us in the right direction it would be greatly appreciated. I've included the crash.log below.
    EXCEPTION INFORMATION
    Time = 12/30/2013 13:08:43.990
    Service name = SMS_EXECUTIVE
    Thread name = SMS_ALERT_NOTIFICATION
    Executable = C:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe
    Process ID = 3368 (0xd28)
    Thread ID = 4684 (0x124c)
    Instruction address = 0000000077B33290
    Exception = c0000005 (EXCEPTION_ACCESS_VIOLATION)
    Description = "The thread tried to read from the virtual address 0000000000BA2D28 for which it does not have the appropriate access."
    Raised inside CService mutex = No
    CService mutex description = ""
    LOADED MODULES
    Module BaseAddr Size File Version Product Version Debug Symbols Full Path To Module Full Path To Debug Symbols
    ===========================================================================================================================================================================
    C:\Windows\WinSxS\amd64_microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146\mfc90.dll 0000000053FD0000 004e4000 9.0.30729.6161 9.0.30729.6161 Symbols Load Failed C:\Windows\WinSxS\amd64_microsoft.vc90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146\mfc90.dll
    C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCR90.dll 000000006E0B0000 000a3000 9.0.30729.6161 9.0.30729.6161 DLL Exports Only C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCR90.dll
    C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCP90.dll 000000006E7D0000 000d3000 9.0.30729.6161 9.0.30729.6161 DLL Exports Only C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCP90.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\basesvr.dll 0000000070220000 00393000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\basesvr.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseobj.dll 00000000705C0000 001e7000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\baseobj.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707B0000 0014a000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\mfc100.dll 0000000070900000 0055d000 10.0.40219.1 10.0.40219.1 Symbols Load Failed C:\Program Files\Microsoft Configuration Manager\bin\x64\mfc100.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\MSVCR100.dll 0000000071780000 000d2000 10.0.40219.1 10.0.40219.1 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\MSVCR100.dll
    C:\Windows\system32\MSVCP100.dll 0000000072840000 00098000 10.0.40219.1 10.0.40219.1 DLL Exports Only C:\Windows\system32\MSVCP100.dll
    C:\Windows\system32\security.dll 0000000072B70000 00003000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\security.dll
    C:\Windows\system32\odbcint.dll 0000000073020000 00038000 6.1.7600.16385 6.1.7600.16385 Symbols Load Failed C:\Windows\system32\odbcint.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll 0000000073200000 00024000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\aikbmgr.dll 0000000073230000 00016000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\aikbmgr.dll
    C:\Windows\system32\sqlncli11.dll 0000000073470000 00353000 2011.110.2100.60 11.0.2100.60 DLL Exports Only C:\Windows\system32\sqlncli11.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\SMSSVREH.DLL 0000000073A70000 0000f000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\SMSSVREH.DLL
    C:\Program Files\Microsoft Configuration Manager\bin\x64\MFC100ENU.DLL 0000000074130000 0000d000 10.0.40219.1 10.0.40219.1 Symbols Load Failed C:\Program Files\Microsoft Configuration Manager\bin\x64\MFC100ENU.DLL
    C:\Program Files\Microsoft Configuration Manager\bin\x64\LibRDC.dll 0000000074140000 00029000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\LibRDC.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\basesql.dll 0000000074170000 0004c000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\basesql.dll
    C:\Windows\system32\1033\SQLNCLIR11.RLL 0000000074270000 00038000 2011.110.2100.60 11.0.2100.60 Symbols Load Failed C:\Windows\system32\1033\SQLNCLIR11.RLL
    C:\Windows\WinSxS\amd64_microsoft.vc90.mfcloc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_01c9581e60cbee58\MFC90ENU.DLL 0000000074930000 0000d000 9.0.30729.6161 9.0.30729.6161 Symbols Load Failed C:\Windows\WinSxS\amd64_microsoft.vc90.mfcloc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_01c9581e60cbee58\MFC90ENU.DLL
    C:\Windows\system32\USER32.dll 0000000077400000 000fa000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\USER32.dll
    C:\Windows\system32\kernel32.dll 0000000077500000 0011f000 6.1.7601.18229 6.1.7601.18229 DLL Exports Only C:\Windows\system32\kernel32.dll
    C:\Windows\SYSTEM32\ntdll.dll 0000000077AE0000 001a9000 6.1.7601.18247 6.1.7601.18247 DLL Exports Only C:\Windows\SYSTEM32\ntdll.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe 000000013FDA0000 0001f000 5.0.7804.1000 5.0.7804.1000 Symbols Load Failed C:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe
    C:\Windows\system32\dbghelp.dll 000007FEE3340000 00125000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\dbghelp.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\AmtUtil.dll 000007FEF40A0000 00174000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\AmtUtil.dll
    C:\Windows\system32\comsvcs.dll 000007FEF4400000 001b0000 2001.12.8530.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\comsvcs.dll
    C:\Windows\system32\MTXDM.DLL 000007FEF45B0000 0000e000 2001.12.8530.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\MTXDM.DLL
    C:\Windows\system32\framedynos.dll 000007FEF5670000 0004c000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\framedynos.dll
    C:\Windows\system32\ODBC32.dll 000007FEF56C0000 000b1000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\ODBC32.dll
    C:\Windows\system32\CLUSAPI.DLL 000007FEF5800000 00050000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\CLUSAPI.DLL
    C:\Windows\system32\RESUTILS.DLL 000007FEF5950000 00019000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\RESUTILS.DLL
    C:\Windows\system32\MSIMG32.dll 000007FEF5A00000 00007000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\MSIMG32.dll
    C:\Windows\system32\BROWCLI.DLL 000007FEF5FC0000 00012000 6.1.7601.17887 6.1.7601.17887 DLL Exports Only C:\Windows\system32\BROWCLI.DLL
    C:\Windows\system32\webio.dll 000007FEF6090000 00064000 6.1.7601.17725 6.1.7601.17725 Symbols Load Failed C:\Windows\system32\webio.dll
    C:\Windows\system32\WINHTTP.dll 000007FEF6100000 00071000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\WINHTTP.dll
    C:\Windows\System32\msxml6.dll 000007FEF61B0000 001f1000 6.30.7601.17988 6.30.7601.17988 DLL Exports Only C:\Windows\System32\msxml6.dll
    C:\Windows\system32\cscapi.dll 000007FEF8990000 0000f000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\cscapi.dll
    C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_a4d3b9377117c3df\COMCTL32.dll 000007FEF89E0000 000a0000 5.82.7601.18201 6.1.7601.18201 DLL Exports Only C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_a4d3b9377117c3df\COMCTL32.dll
    C:\Windows\system32\WSOCK32.dll 000007FEF96A0000 00009000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\WSOCK32.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll 000007FEF9750000 00017000 5.0.7804.1000 5.0.7804.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll
    C:\Windows\system32\MPR.dll 000007FEF9D30000 00018000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\MPR.dll
    C:\Windows\system32\adsldpc.dll 000007FEF9D70000 0003d000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\adsldpc.dll
    C:\Windows\system32\ACTIVEDS.dll 000007FEF9DB0000 00046000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\ACTIVEDS.dll
    C:\Windows\system32\SAMCLI.DLL 000007FEFA930000 00014000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\SAMCLI.DLL
    C:\Windows\system32\ntdsapi.dll 000007FEFA9D0000 00027000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\ntdsapi.dll
    C:\Windows\system32\rasadhlp.dll 000007FEFAA00000 00008000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\rasadhlp.dll
    C:\Windows\system32\wkscli.dll 000007FEFADA0000 00015000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\wkscli.dll
    C:\Windows\system32\NETAPI32.dll 000007FEFADC0000 00016000 6.1.7601.17887 6.1.7601.17887 DLL Exports Only C:\Windows\system32\NETAPI32.dll
    C:\Windows\System32\fwpuclnt.dll 000007FEFAFF0000 00053000 6.1.7601.18283 6.1.7601.18283 DLL Exports Only C:\Windows\System32\fwpuclnt.dll
    C:\Windows\system32\WINNSI.DLL 000007FEFB100000 0000b000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\WINNSI.DLL
    C:\Windows\system32\IPHLPAPI.DLL 000007FEFB140000 00027000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\IPHLPAPI.DLL
    C:\Program Files\Microsoft Configuration Manager\bin\x64\AmtInstFileUtil.dll 000007FEFBC30000 00031000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\AmtInstFileUtil.dll
    C:\Program Files\Microsoft Configuration Manager\bin\x64\Certificate.dll 000007FEFBC70000 00015000 5.0.7958.1000 5.0.7958.1000 DLL Exports Only C:\Program Files\Microsoft Configuration Manager\bin\x64\Certificate.dll
    C:\Windows\system32\DSROLE.DLL 000007FEFBDB0000 0000c000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\DSROLE.DLL
    C:\Windows\system32\ATL.DLL 000007FEFBDD0000 00019000 3.5.2284.0 6.5.0.2284 DLL Exports Only C:\Windows\system32\ATL.DLL
    C:\Windows\system32\dwmapi.dll 000007FEFC320000 00018000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\dwmapi.dll
    C:\Windows\system32\UxTheme.dll 000007FEFC880000 00056000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\UxTheme.dll
    C:\Windows\system32\WTSAPI32.dll 000007FEFCEB0000 00011000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\WTSAPI32.dll
    C:\Windows\system32\VERSION.dll 000007FEFD080000 0000c000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\VERSION.dll
    C:\Windows\System32\wshtcpip.dll 000007FEFD150000 00007000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\System32\wshtcpip.dll
    C:\Windows\system32\schannel.DLL 000007FEFD360000 00057000 6.1.7601.18270 6.1.7601.18270 DLL Exports Only C:\Windows\system32\schannel.DLL
    C:\Windows\system32\rsaenh.dll 000007FEFD3E0000 00047000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\rsaenh.dll
    C:\Windows\system32\credssp.dll 000007FEFD430000 0000a000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\credssp.dll
    C:\Windows\system32\bcryptprimitives.dll 000007FEFD480000 0004c000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\bcryptprimitives.dll
    C:\Windows\system32\DNSAPI.dll 000007FEFD560000 0005b000 6.1.7601.17570 6.1.7601.17570 DLL Exports Only C:\Windows\system32\DNSAPI.dll
    C:\Windows\system32\kerberos.DLL 000007FEFD670000 000b4000 6.1.7601.17926 6.1.7601.17926 DLL Exports Only C:\Windows\system32\kerberos.DLL
    C:\Windows\system32\LOGONCLI.DLL 000007FEFD780000 00030000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\LOGONCLI.DLL
    C:\Windows\system32\msv1_0.DLL 000007FEFD7B0000 00051000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\msv1_0.DLL
    C:\Windows\system32\netutils.dll 000007FEFD850000 0000c000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\netutils.dll
    C:\Windows\System32\wship6.dll 000007FEFD860000 00007000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\System32\wship6.dll
    C:\Windows\system32\mswsock.dll 000007FEFD870000 00055000 6.1.7601.18254 6.1.7601.18254 DLL Exports Only C:\Windows\system32\mswsock.dll
    C:\Windows\system32\bcrypt.dll 000007FEFD900000 00022000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\bcrypt.dll
    C:\Windows\system32\ncrypt.dll 000007FEFD930000 0004d000 6.1.7601.18270 6.1.7601.18270 DLL Exports Only C:\Windows\system32\ncrypt.dll
    C:\Windows\system32\CRYPTSP.dll 000007FEFD9C0000 00017000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\CRYPTSP.dll
    C:\Windows\system32\srvcli.dll 000007FEFD9E0000 00023000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\srvcli.dll
    C:\Windows\system32\cryptdll.dll 000007FEFDAF0000 00014000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\cryptdll.dll
    C:\Windows\system32\secur32.dll 000007FEFDB10000 0000b000 6.1.7601.18270 6.1.7601.18270 DLL Exports Only C:\Windows\system32\secur32.dll
    C:\Windows\system32\SspiCli.dll 000007FEFDDA0000 00025000 6.1.7601.18270 6.1.7601.18270 DLL Exports Only C:\Windows\system32\SspiCli.dll
    C:\Windows\system32\CRYPTBASE.dll 000007FEFDE30000 0000f000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\CRYPTBASE.dll
    C:\Windows\system32\RpcRtRemote.dll 000007FEFDF20000 00014000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\RpcRtRemote.dll
    C:\Windows\system32\profapi.dll 000007FEFDF40000 0000f000 6.1.7600.16385 6.1.7600.16385 Symbols Load Failed C:\Windows\system32\profapi.dll
    C:\Windows\system32\MSASN1.dll 000007FEFDFE0000 0000f000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\MSASN1.dll
    C:\Windows\system32\KERNELBASE.dll 000007FEFE0B0000 0006b000 6.1.7601.18229 6.1.7601.18229 DLL Exports Only C:\Windows\system32\KERNELBASE.dll
    C:\Windows\system32\WINTRUST.dll 000007FEFE120000 0003a000 6.1.7601.18205 6.1.7601.18205 DLL Exports Only C:\Windows\system32\WINTRUST.dll
    C:\Windows\system32\CRYPT32.dll 000007FEFE160000 0016c000 6.1.7601.18277 6.1.7601.18277 DLL Exports Only C:\Windows\system32\CRYPT32.dll
    C:\Windows\system32\CLBCatQ.DLL 000007FEFE310000 00099000 2001.12.8530.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\CLBCatQ.DLL
    C:\Windows\system32\ole32.dll 000007FEFE430000 00203000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\ole32.dll
    C:\Windows\system32\SHELL32.dll 000007FEFE640000 00d88000 6.1.7601.18222 6.1.7601.18222 DLL Exports Only C:\Windows\system32\SHELL32.dll
    C:\Windows\system32\WLDAP32.dll 000007FEFF3D0000 00052000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\WLDAP32.dll
    C:\Windows\system32\USP10.dll 000007FEFF430000 000c9000 1.626.7601.18009 1.626.7601.18009 DLL Exports Only C:\Windows\system32\USP10.dll
    C:\Windows\system32\COMDLG32.dll 000007FEFF500000 00097000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\COMDLG32.dll
    C:\Windows\system32\LPK.dll 000007FEFF780000 0000e000 6.1.7601.18177 6.1.7601.18177 DLL Exports Only C:\Windows\system32\LPK.dll
    C:\Windows\system32\IMM32.DLL 000007FEFF790000 0002e000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\IMM32.DLL
    C:\Windows\system32\NSI.dll 000007FEFF7C0000 00008000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\NSI.dll
    C:\Windows\system32\ADVAPI32.dll 000007FEFF7D0000 000db000 6.1.7601.18247 6.1.7601.18247 DLL Exports Only C:\Windows\system32\ADVAPI32.dll
    C:\Windows\system32\GDI32.dll 000007FEFF8B0000 00067000 6.1.7601.18275 6.1.7601.18275 DLL Exports Only C:\Windows\system32\GDI32.dll
    C:\Windows\system32\IMAGEHLP.DLL 000007FEFF920000 00019000 6.1.7601.18288 6.1.7601.18288 DLL Exports Only C:\Windows\system32\IMAGEHLP.DLL
    C:\Windows\system32\MSCTF.dll 000007FEFF940000 00109000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\system32\MSCTF.dll
    C:\Windows\system32\OLEAUT32.dll 000007FEFFA50000 000d7000 6.1.7601.17676 6.1.7601.17676 DLL Exports Only C:\Windows\system32\OLEAUT32.dll
    C:\Windows\system32\RPCRT4.dll 000007FEFFB30000 0012d000 6.1.7601.18205 6.1.7601.18205 DLL Exports Only C:\Windows\system32\RPCRT4.dll
    C:\Windows\system32\WS2_32.dll 000007FEFFC60000 0004d000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\WS2_32.dll
    C:\Windows\SYSTEM32\sechost.dll 000007FEFFCB0000 0001f000 6.1.7600.16385 6.1.7600.16385 DLL Exports Only C:\Windows\SYSTEM32\sechost.dll
    C:\Windows\system32\SHLWAPI.dll 000007FEFFCD0000 00071000 6.1.7601.17514 6.1.7601.17514 DLL Exports Only C:\Windows\system32\SHLWAPI.dll
    C:\Windows\system32\msvcrt.dll 000007FEFFD50000 0009f000 7.0.7601.17744 6.1.8638.17744 DLL Exports Only C:\Windows\system32\msvcrt.dll
    STACK TRACE FOR SMS_EXECUTIVE THREAD 4516 (0x11a4) AT 12/30/2013 13:08:44.120
    CS: 0033 RIP: 0000000077B0C541 EFLAGS: 00000246
    SS: 002b RSP: 0000000001ABFB30 RBP: 0000000000000000
    DS: 0000 ES: 0000 FS: 0000 GS: 0000
    RAX: 0000000000000000 RDX: 0000000000C06BD0
    RBX: 0000000000000000 RCX: 0000000000C0F960
    RSI: 0000000000000000 RDI: 0000000000000000
    R8: 000007FFFFFD6000 R9: 0000000000000004
    R10: 0000000000000000 R11: 0000000000000043
    R12: 0000000000000000 R13: 0000000000000000
    R14: 0000000000000000 R15: 0000000000000000
    Module Address Offset Function + Displacement # Params Possible Values Of First Four Params Decorated Function Name
    ================================================================================================================================================================================================================================
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B315FA 000515fa ZwDelayExecution() + 10 bytes Unknown 00000000 00000000 00000000 00000000 ZwDelayExecution
    C:\Windows\system32\KERNELBASE.dll 000007FEFE0B1203 00001203 SleepEx() + 179 bytes Unknown 00000000 00000000 00000000 00000000 SleepEx
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F51A1 000451a1 CService::ProceedIfNotHandlingException() + 29 bytes Unknown 00000000 00000000 00000000 00000000 ?ProceedIfNotHandlingException@CService@@CAXXZ
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F3844 00043844 CService::Yield() + 44 bytes Unknown 00000000 00000000 00000000 00000000 ?Yield@CService@@SAKHK@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe 000000013FDACC86 0000cc86 Unknown Unknown 00000000 00000000 00000000 00000000 Unknown
    C:\Program Files\Microsoft Configuration Manager\bin\x64\smsexec.exe 000000013FDB08CA 000108ca Unknown Unknown 00000000 00000000 00000000 00000000 Unknown
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F40F2 000440f2 CService::_WorkerThread() + 54 bytes Unknown 00000000 00000000 00000000 00000000 ?_WorkerThread@CService@@CAKPEAX@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F3F60 00043f60 CService::_NewThreadWrapper() + 28 bytes Unknown 00000000 00000000 00000000 00000000 ?_NewThreadWrapper@CService@@CAKPEAX@Z
    C:\Windows\system32\kernel32.dll 000000007751652D 0001652d BaseThreadInitThunk() + 13 bytes Unknown 00000000 00000000 00000000 00000000 BaseThreadInitThunk
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B0C541 0002c541 RtlUserThreadStart() + 33 bytes Unknown 00000000 00000000 00000000 00000000 RtlUserThreadStart
    WARNING: The stack could not be completely unwound. This is usually due to a
    limitation in the stack unwinding algorithm, but it can also happen if the stack
    itself was corrupted.
    STACK TRACE FOR SMS_ALERT_NOTIFICATION THREAD 4684 (0x124c) AT 12/30/2013 13:08:43.990
    CS: 0033 RIP: 0000000077B0C541 EFLAGS: 00010202
    SS: 002b RSP: 0000000002F2FCC0 RBP: 0000000000000000
    DS: 002b ES: 002b FS: 0053 GS: 002b
    RAX: 000000125A55DA38 RDX: 00000000023123E0
    RBX: 0000000000000000 RCX: 000000FFFFFFFFFF
    RSI: 0000000000000000 RDI: 0000000000000000
    R8: 00000000023123F0 R9: 000007BC01BA00BC
    R10: 6F626E695C554946 R11: 00000000004DAB18
    R12: 0000000000000000 R13: 0000000000000000
    R14: 0000000000000000 R15: 0000000000000000
    Module Address Offset Function + Displacement # Params Possible Values Of First Four Params Decorated Function Name
    ================================================================================================================================================================================================================================
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B33290 00053290 RtlFreeHeap() + 208 bytes Unknown 00000000 00000000 00000000 00000000 RtlFreeHeap
    C:\Windows\system32\kernel32.dll 000000007752300A 0002300a HeapFree() + 10 bytes Unknown 00000000 00000000 00000000 00000000 HeapFree
    C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.6161_none_08e61857a83bc251\MSVCR90.dll 000000006E0FCABC 0004cabc free() + 28 bytes Unknown 00000000 00000000 00000000 00000000 free
    C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll 000007FEF97560D6 000060d6 ConnectToShare() + 4254 bytes Unknown 00000000 00000000 00000000 00000000 ConnectToShare
    C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll 000007FEF97569FF 000069ff ConnectToShare() + 6599 bytes Unknown 00000000 00000000 00000000 00000000 ConnectToShare
    C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll 000007FEF975AC17 0000ac17 ThreadMain() + 9579 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll 000007FEF975B00D 0000b00d ThreadMain() + 10593 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\NotiCtrl.dll 000007FEF97587A0 000087a0 ThreadMain() + 244 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F3F60 00043f60 CService::_NewThreadWrapper() + 28 bytes Unknown 00000000 00000000 00000000 00000000 ?_NewThreadWrapper@CService@@CAKPEAX@Z
    C:\Windows\system32\kernel32.dll 000000007751652D 0001652d BaseThreadInitThunk() + 13 bytes Unknown 00000000 00000000 00000000 00000000 BaseThreadInitThunk
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B0C541 0002c541 RtlUserThreadStart() + 33 bytes Unknown 00000000 00000000 00000000 00000000 RtlUserThreadStart
    WARNING: The stack could not be completely unwound. This is usually due to a
    limitation in the stack unwinding algorithm, but it can also happen if the stack
    itself was corrupted.
    STACK TRACE FOR SMS_AMT_PROXY_COMPONENT THREAD 7724 (0x1e2c) AT 12/30/2013 13:08:44.150
    CS: 0033 RIP: 0000000077B0C541 EFLAGS: 00000246
    SS: 002b RSP: 00000000030BFC00 RBP: 0000000000000000
    DS: 0000 ES: 0000 FS: 0000 GS: 0000
    RAX: 0000000000C3CE30 RDX: 000000000000008C
    RBX: 0000000000000000 RCX: 0000000000120000
    RSI: 0000000000000000 RDI: 0000000000000000
    R8: 0000000000C3CE20 R9: 0000000000C3CE30
    R10: 0000000000000002 R11: 0000000000C3CE78
    R12: 0000000000000000 R13: 0000000000000000
    R14: 0000000000000000 R15: 0000000000000000
    Module Address Offset Function + Displacement # Params Possible Values Of First Four Params Decorated Function Name
    ================================================================================================================================================================================================================================
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B3168A 0005168a NtQueryAttributesFile() + 10 bytes Unknown 00000000 00000000 00000000 00000000 NtQueryAttributesFile
    C:\Windows\system32\KERNELBASE.dll 000007FEFE0B32C8 000032c8 GetFileAttributesW() + 120 bytes Unknown 00000000 00000000 00000000 00000000 GetFileAttributesW
    C:\Windows\system32\KERNELBASE.dll 000007FEFE0B9784 00009784 GetFileAttributesA() + 68 bytes Unknown 00000000 00000000 00000000 00000000 GetFileAttributesA
    C:\Program Files\Microsoft Configuration Manager\bin\x64\AmtUtil.dll 000007FEF40F152C 0005152c CAMTInboxManager::InitializeSiteComponentInbox() + 436 bytes Unknown 00000000 00000000 00000000 00000000 ?InitializeSiteComponentInbox@CAMTInboxManager@@QEAAJPEBD0@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll 000000007321107F 0001107f ThreadMain() + 9075 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll 0000000073213379 00013379 ThreadMain() + 18029 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll 000000007320DF0C 0000df0c CCertificateHashList::operator=() + 15580 bytes Unknown 00000000 00000000 00000000 00000000 ??4CCertificateHashList@@QEAAAEAV0@AEBV0@@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll 000000007320ECB5 0000ecb5 CAMTInboxManager::operator=() + 137 bytes Unknown 00000000 00000000 00000000 00000000 ??4CAMTInboxManager@@QEAAAEAV0@AEBV0@@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\amtproxymgr.dll 000000007320ED15 0000ed15 ThreadMain() + 9 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F3F60 00043f60 CService::_NewThreadWrapper() + 28 bytes Unknown 00000000 00000000 00000000 00000000 ?_NewThreadWrapper@CService@@CAKPEAX@Z
    C:\Windows\system32\kernel32.dll 000000007751652D 0001652d BaseThreadInitThunk() + 13 bytes Unknown 00000000 00000000 00000000 00000000 BaseThreadInitThunk
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B0C541 0002c541 RtlUserThreadStart() + 33 bytes Unknown 00000000 00000000 00000000 00000000 RtlUserThreadStart
    WARNING: The stack could not be completely unwound. This is usually due to a
    limitation in the stack unwinding algorithm, but it can also happen if the stack
    itself was corrupted.
    STACK TRACE FOR SMS_AI_KB_MANAGER THREAD 2468 (0x9a4) AT 12/30/2013 13:08:44.166
    CS: 0033 RIP: 0000000077B0C541 EFLAGS: 00000246
    SS: 002b RSP: 0000000001E4FC90 RBP: 0000000000000000
    DS: 0000 ES: 0000 FS: 0000 GS: 0000
    RAX: 0000000000000000 RDX: 0000000000000080
    RBX: 0000000000000000 RCX: 0000000001E4F8A0
    RSI: 0000000000000000 RDI: 0000000000000000
    R8: 0000000070228A40 R9: 0000000001E4F878
    R10: 0000000000000001 R11: 0000000001E4F790
    R12: 0000000000000000 R13: 0000000000000000
    R14: 0000000000000000 R15: 0000000000000000
    Module Address Offset Function + Displacement # Params Possible Values Of First Four Params Decorated Function Name
    ================================================================================================================================================================================================================================
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B3186A 0005186a NtWaitForMultipleObjects() + 10 bytes Unknown 00000000 00000000 00000000 00000000 NtWaitForMultipleObjects
    C:\Windows\system32\KERNELBASE.dll 000007FEFE0B1430 00001430 GetCurrentProcess() + 64 bytes Unknown 00000000 00000000 00000000 00000000 GetCurrentProcess
    C:\Windows\system32\kernel32.dll 0000000077511220 00011220 WaitForMultipleObjects() + 176 bytes Unknown 00000000 00000000 00000000 00000000 WaitForMultipleObjects
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F4997 00044997 CService::YieldAndWait() + 1047 bytes Unknown 00000000 00000000 00000000 00000000 ?YieldAndWait@CService@@CAKKPEBQEAXHKKHHK@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F3B36 00043b36 CService::YieldAndWaitForMultipleObjects() + 186 bytes Unknown 00000000 00000000 00000000 00000000 ?YieldAndWaitForMultipleObjects@CService@@SAKKPEBQEAXHKHK@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\basesvr.dll 00000000703A8A88 00188a88 CSMSObjectManager::WaitForEvents() + 464 bytes Unknown 00000000 00000000 00000000 00000000 ?WaitForEvents@CSMSObjectManager@@QEAAKHPEAPEAXK@Z
    C:\Program Files\Microsoft Configuration Manager\bin\x64\aikbmgr.dll 0000000073234CF7 00004cf7 Unknown Unknown 00000000 00000000 00000000 00000000 Unknown
    C:\Program Files\Microsoft Configuration Manager\bin\x64\aikbmgr.dll 0000000073235BFD 00005bfd ThreadMain() + 289 bytes Unknown 00000000 00000000 00000000 00000000 ThreadMain
    C:\Program Files\Microsoft Configuration Manager\bin\x64\baseutil.dll 00000000707F3F60 00043f60 CService::_NewThreadWrapper() + 28 bytes Unknown 00000000 00000000 00000000 00000000 ?_NewThreadWrapper@CService@@CAKPEAX@Z
    C:\Windows\system32\kernel32.dll 000000007751652D 0001652d BaseThreadInitThunk() + 13 bytes Unknown 00000000 00000000 00000000 00000000 BaseThreadInitThunk
    C:\Windows\SYSTEM32\ntdll.dll 0000000077B0C541 0002c541 RtlUserThreadStart() + 33 bytes Unknown 00000000 00000000 00000000 00000000 RtlUserThreadStart
    WARNING: The stack could not be completely unwound. This is usually due to a
    limitation in the stack unwinding algorithm, but it can also happen if the stack
    itself was corrupted.
    ATTEMPTING TO WRITE OUT A MINIDUMP...
    - Successfully wrote out a minidump.

    Hi,
    I agree with Jason.
    You'd better contact product support so that they can track the crash to see if there is a common theme
    around it, thus the need for a hotfix. Or maybe there is already a hotfix for this that has not been made public yet.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

  • After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on "get more search engines" I cannot find Google or Bing or -

    Problem with search
    After upgrading from 8 to 9.0.1 I no longer have any search engines installed. I would like to install Google as my default search engine. When I click on “get more search engines” I cannot find Google or Bing or …

    I resolved my issue. Renamed search.sqlite and reinstalled Firefox 9.0.1
    All default search engines are now available.

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • Reinstalling Elements 11 after upgrading from Windows XP to Windows 7?

    Any idea how I can reinstall Elements 11  (Premier and Photoshop) after upgrading from Windows XP to Windows 7?

    Download from
    Download Photoshop Elements products | 13, 12, 11, 10
    Download Premiere Elements products | 13, 12, 11, 10
    Install then enter your serial number.

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • HP Media Center PC m1050e - Can't connect to internet after upgrade from XP to Windows 7

    My desktop PC with Windows 7 will not connect to the internet after upgrading from XP to Windows 7 Home Premium.  This upgrade actually required saving files and a fresh install of Windows 7.  When getting Router support help to load a new driver, I keep getting a an error message "Realtek Network Contoller Was Not Found".  They say it's an issue that HP will need to help resolve.  Can anyone help?
    This question was solved.
    View Solution.

    Thank you very much for your help.  I will look into the two options you gave me.

  • Elements 5 will not start from the windows old file after upgrading from vista to win 7

    Elements 5 will not start from windows.old after upgrading from vista to win 7

    Ideally there should not be any impact of OS change, but officially PSE5 is not supported on Win7.
    What exactly happens ? Can you see the processes running in Task-manager?

  • Scanner of HP 8500 A909g does not work after upgrading from Windows 7 to Windows 10

    After upgrading from Windows 7 to Windows 10 and subsequent upgrade of printer software, the scanner functionality did not work. When I tried to uninstall the printer software I got the message "HP uninstaller has stopped working". After another upgrade of printer software the scanner was still not working. How can I get around this problem? Update:
    I followed the instructions for a similar problem with Windows 8 on http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Scan-doesn-t-work-on-Solution-Center-after-migrating-to-Win/td-p/2228367.After this, the scanning seems to work. Not sure whether it is possible to uninstall, though (don't want to try since it is working).

    I had the same problem with my Officejet Pro 8600 All-in-One scanner, sfter upgrading from Windows 8.1 to Windows 10. After uninstalling and then reinstalling the printer driver, the problem is solved. You can look up the model of your printer on HP's support site and download it from there. Apparently, not all printers are compatible with Windows 10. In that case, they recommend you buy a new printer. ;-)

Maybe you are looking for

  • How to find the enhance pack in my current system

    Hi, We have upgraded from 4.6c to ECC 6.00. How to find out the enhancement pack of my current installation. Thanks in advance Raman

  • WebFOCUS integration with oracle apps CRM

    Hi Experts, Could please give me some suggestions onthis. We got a requirement like. Our user want to generate the reports using Webfocus from oracle apps CRM. Front end they want to use Webfocus(From OAF page). Please any body having any idea onthis

  • Finding top five number in an array of arraylists.

    I have to write a method with a heading public static int [] findTopFiveMostSteps ( ArrayList [] temp )i will input an array of arraylists, and I have to write this method that will return a integer array containing the top five number in that array

  • Close window not working when publishing as HTML5 on Adobe Connect using CP8

    Hi all, I'm trying to get a button that closes the project/window at the end of a video. I am using CP8. I can get it to work when publishing as SWF to Adobe Captivate. It also works when publishing as HTML5 but not on an LMS (Adobe Connect). I have

  • Create Client Using WSDL files

    Hi All, I've completed the following - 1. Created the scenario SOAP => XI => RFC 2. Using XI configuration , generated WSDL specifying the Message Interface which triggers the scenario in XI. http://<serverhost>:<port>/XISOAPAdapter/MessageServlet?ch