WINDOWS 10 DOES NOT ALLOW ME TO SCAN ON THE ALL IN ONE HP 3055.

INSTALLED WINDOWS 10. HP 3055 PRINTS WELL BUT DO NOT SCAN. SCANNER CANNOT BE DETECTED BY COMPUTER HOWEVER IT SHOWS AS A DEVICE ON COMPUTER.

Hi, Please try new driver from the following link:    http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-3000mfp/All-in-One-Printer-series/1161389/model/1140780#Z7_3054ICK0KGTE30AQO5O3KA30R1 Good luck.

Similar Messages

  • Windows tells me "an unknown program wants to change this computer; windows does not allow firefox updates to complete.

    What can i do about this problem? I click "more details" and find out that the 'unknown program' is firefox. I click to install; but windows does not allow the updates to complete. I let the update window run for over an hour one day... it still did not complete.

    Check that you do not run Firefox as Administrator.<br />
    Right-click the Firefox desktop shortcut and choose "Properties".<br />
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.<br />
    * Privilege Level: "Run this program as Administrator" should not be selected<br />
    * "Run this program in compatibility mode for:" should not be selected<br />
    Also check the Properties of the firefox.exe program in the Firefox program directory.<br />

  • My import window does not allow me to pick the "move" option. How do I access it?

    My import window does not allow me to pick the "move" option. How do I access it?

    Because Adobe has taken the stance, within Lightroom, that it will not touch files on card. Your card serves as a fail-safe backup in the event of disaster.
    Ejecting a card has no effect on your images and is allowed so that you can removed the card without intervention of the OS.
    After you've ensured image fidelity and backup, accepted best practice is to reformat your card in-camera.  Trust me, I don't want to be on this forum answering questions about why someone lost their files because they "moved" them. This has been debated many times on the forum.

  • Hello to you in the company Apple. I am having a problem in the Apple Store ID does not allow me to work on the Apple Store I hope that you will help. You have sent you yesterday and today I want to call the phone number for Mei you and explain to you why

    Hello to you in the company Apple. I am having a problem in the Apple Store ID does not allow me to work on the Apple Store I hope that you will help. You have sent you yesterday and today I want to call the phone number for Mei you and explain to you why with many thanks

    Sorry, but you can't reach Apple here. This is a user to user forum and Apple does not follow these discussions.
    Try this link to contact Apple directly:
    Apple - Support - iPhone - Contact Support
    Did you already have a look at this page?
    App Store Frequently Asked Questions (FAQ)

  • A new window does not open when I click on the new tab "plus" sign. How do I fix this?

    A new window does not open when I click on the new tab "plus" sign. How do I fix this?

    Try uninstalling the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

  • My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

    My iPad does not recognize my printer (HP officejet 5510 All-in-One). What can I do?

    The Photosmart 5510 is AirPrint capable.  You can find that information linked below.  There may be something in the network that is preventing communication.  To use AirPrint your router needs to support Bonjour services.  Run the download below.  It will let you test Bonjour services from your Windows PC.  If this app can't see the printer either, then the router's Bonjour services are off, or it does not support Bonjour.  Let me know what the app finds.  If it can't find the printer, let me know what brand and model router you have, and I'll see if it has Bonjour services at all.
    Bonjour Print Services for Windows v2.0.2
    HP Web Connected Printers and Supported Cloud Services
    I am a printer tech for HP.

  • Modeless window does not allow refocus

    When using the software to create a modeless subdialog.  The subdialog does not allow the launching Dialog to come to the foreground when clicked, or a focus change.  I have to minimize the subdialog or move it to get the
    Parent or main dialog back into the foreground.  The software was for "ModelessDialog.cpp obtained from the NI Site.
    Solved!
    Go to Solution.

    Hi,
     Have you incorporated modifications to the InitInstance() function in ModlessDialog.cpp? The OnButtonClickedOk() and OnCancel() functions in ModlessDialogDlg.cpp determine how the subdialog is handled. You should be able to incorporate the behavior you are wanting into these functions.
    -Adri K
    Adri Kruger
    National Instruments
    LabVIEW Product Marketing

  • When clicking on a lookup, firefor does not allow me to select from the list

    When I use firefox, the website I am on has lookup fields located on it, firefox does not allow me to select my preferred option from the list. also when I slect another lookup from a list it displays the message 'invalid lookup value located in field ......'
    This does not happen in IE

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Does not allow to increase width of the filed

    hi all,
    well i have report that is designed by someone else in report 6i, now i want to change the width of one filed , that is i want to increase width but it does not allow me to change it
    how to change it??
    thanks
    abhi.

    There can be two reasons...
    1. Check the outer frame(s) for that field. I mean if that field exists in repeating frame or main frame then increase the frame size first then you can increase the field side.
    2. There is one button in the LAYOUT SECTION at top called FREEZE PANES. If it is pressed mean if you will resize the field size then frame side will be automatically adjust. So, suppose you replay LAYOUT section's size is not allowing you yo increase the frames out of the LAYOUT section. If it is then increase the layout section size and try..
    -Ammad

  • HT3180 I tried again later several times and am afraid the rental period will expire and will not be able to watch the movie. The system also does not allow me to re-purchase the movie.

    I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/

    Likely network related
    What is your current connection, use speedtest
    Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
    If on wifi try Ethernet
    Make sure DNS is set to automatic (settings - general - network)

  • My control button does not allow me to return to the home page. I have to completely shut down the system and reboot to switch to another application.

    My navigating button, key does not allow me to switch to other applications. To do this I have to
    Shut down and reboot. I spoke with apple customer service on
    Friday and they has me connect to the computer and download any new
    And updated information. That resolved the issue for one day and the problem
    Started again.

    Try restoring your phone as a "new" device in iTunes, not from backup. When finished, eject your phone. Do not sync any content back to your phone. How are things working now? If OK, sync your content back to your phone. If not, make an appointment at an Apple store, as you most likely have a hardware issue.

  • Windows does not recognise my iphone after updating the software to 4.3

    Drivers for my iphone does not have Software since i downloaded the 4.3 update, it is telling me to insert a disk and I do not have one.. Please help, I'm desperate. Phone does not restart or turn off, it continuously shows the the message where to connect the usb lead to itunes, but it is not recognised.

    Can anyone tell me how to reset the phone, i press the home key and the off switch together, the apple logo comes up, but it still tells me to connect to itunes but there the software is not recognised.

  • When I click on a link Firefox does not allow me to go to the link

    When I click on a link Firefox does not go the link.
    == This happened ==
    Every time Firefox opened
    == Along time ago.

    I think i've found how to fix this issue when it appears. Don't know what caused it to happen, but that's up to the devs.
    In Thunderbird, you need to re-register http and https to make them open with Firefox (or open well with firefox in this case).
    How to to this?
    Well... open the about:config in thunderbird. You can achieve this by clicking configuration-editor in the advanced tab.
    search for the strings: network.protocol-handler.warn-external.https and network.protocol-handler.warn-external.http. Set both to "true".
    The next time you click on a link from within Thunderbird, it will ask you to set wich program you'd like to open it with.
    Be Aware now!!! Firefox may already be listed in there, but don't pick that one. instead... choose to browse for the app and point to the binairy/exe of firefox.
    (for example: /usr/bin/firefox or c:/program files/mozilla/firefox.)
    You will notice that firefox now does open up with the page you just clicked on.
    If it doesn't right away... just restart thunderbird and check again.
    Please respond if this works for you too on all platforms. It's more interesting to know it does than if it's not.
    Greetz,
    Kenny

  • Photosmart C310 not scanning from the All in One.

    Since reloading drivers after viruses, the scanner asks me to scan from the computer.  I used to scan direct from the C310.
    I tried to scan from the printer's webpage but the save button was missing.  My only options are PDF or jpeg images now.  I just want documents.  Can anyone give me any advice please?

    Hello @jilliran,
    Welcome to the HP Forums!
    I understand you're unable to scan from the front panel of the Photosmart Premium C310A. I will do my best to assist you! First, I need to find out your operating system on your computer? Windows or Mac?
    How is this printer connected? Wireless or USB?
    If you have a Windows computer, please follow this entire HP document on Windows: A 'No Scan Options' or 'Scan settings are not set' Message Displays on the Printer.
    You can scan from the Solution Center for more scanning options. I will provide this HP document on How to Scan from the Solution Center (Windows). If you would like to scan using Web Scan, then I will provide an example on how to save the document:
    You have to right click with your mouse on the scanned image and select save image as. I will be looking forward to hearing from you. Have a great day!
    I worked on behalf of HP.

  • A multi-day/all-day event in the iCloud calendar does not show up in iCal if the "all-day" box is checked

    When I establish a multi-day event on iCloud but do not check the "all-day" box it shows up just fine in iCal as an event that exists on each day along side the other events that occupy those dates.  However, when I check the "all-day" box when editing the event (in either calendar) the event completely disappears from the iCal calendar (it shows up across the top of the iCloud calendar in the "all-day eventt" line.  On my iPhone, there is no change in appearance (the event shows up on each day).
    Anybody have a clue what causes this?  Maybe just a "feature" of iCal beta?

    This is exactly what's happening to me. I've been able to recreate this on a Touch also with OS4. It's not occuring on OS3. I've only been able to recreate the problem on July 30th and August 1st calendar dates for some reason. It may be happening on other dates also but I havn't been able to find any.
    To recreate the problem go into day view on the calendar. Go to August 1st and create a calendar entry. Then touch the left arrow to go back a day then touch the right arrow to return to august 1st and your entry is invisible. It's still there because if you go forward a day then go back a day it shows.
    I've been using list view only now to avoid missing these invisible entries.

Maybe you are looking for