Windows 10 does not recognize monitor FT220HQL as PnP

Just upgraded to Window 10 and it lists the monitor as "generic non PnP".  Resolution is poor and cannot be set to the monitor max value.  I did a restart as outlined in the monitor Quick Guide, but that did not help.  The monitor worked beautifuly in windows 7, and was listed correctly.  The Acer web site lists drivers for all windows up through windows 8, but no windows 10.  Is that the problem?  Will there be a new driver?  Would the Windows 8 driver work in windows 10; and fix the problem?

try the windows 8 driver.

Similar Messages

  • Windows 8 does not recognize ipod nano anymore

    Windows 8 does not recognize my iPod nano anymore
    Did so in the past
    Followed all troubleshooting tips on Apple's page
    Any other suggestions

    Hi there catfish1967,
    You may find the troubleshooting steps in the article below helpful.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W. 

  • Why windows 8 does not recognize ipod touch model A1367 4th Generation?

    Why window 8 does not recognize ipod touch model A1367 4th generation?  and of course iTunes either.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    (it applies to win 8)
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • Windows 7 does not recognize ipod 6th gen nano

    Windows 7 does not recognize my device so I can't sync to iTunes. I tried running MSCONFIG, reinstalling iTunes and various different cables, usb ports. Any other suggestions?

    Does the iPod appear in Device Manager when it is connected?
    To access device manager, click Start and then right->click on Computer and choose Manage.
    It might be listed as unknown or under the USB host controllers section.
    B-rock

  • My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

    My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad.  I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

    Hi there Lizabethfromaz,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Factory reset iphone 4s / windows 7 does not recognize my iphone 4s

    factory reset iphone 4s / windows 7 does not recognize my iphone 4s

    Setting > General > Reset > Erase All Content and Settings.
    Read here for help with iTunes and the device http://support.apple.com/kb/TS1538

  • Windows 7 does not recognize ipod

    My iPod classic is not recognized in windows 7 (new PC).  I can see my iTunes and all the music on line, however, I cannot synch any new music as the PC does not recognize my iPod.  I have tried all the help FAQs that are on-line.

    Does the iPod appear in Device Manager when it is connected?
    To access device manager, click Start and then right->click on Computer and choose Manage.
    It might be listed as unknown or under the USB host controllers section.
    B-rock

  • Windows 7 does not recognize my iphone

    My iPhone 4 is not recognized by my Windows 7 laptop.  iTunes on this PC recognizes it okay, but Windows 7 does not see it as a camera.  On my old WinXP machine, it is recognized with no problem.

    Did you check the camera notification?
    Maybe you'll need to enable it again and reverse the process described in this article:
    iOS: Disabling digital camera notification in Windows

  • My windows 7 does not recognize my ipod touch 64gb 4th gen.

    My windows 7 os does not recognize my 64 gb ipod touch 4th gen. Why not? Please help me!!!!!!!

    Did you do this as I suggested in my first reply?
    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests

  • Windows 10 does not recognize the Monitor as PnP

    Windows 10 has my FT220 HQL touch monitor listed as "generic" and limits the resolution.  Windows 7 recognized the monitor and offred the highest resolution the monitor supports.  The resolution in Windows 10 is very poor and it limits the resolution.  I went through the initial start up procedure as described in the Quick Guide, but it did not help.  The auto Adjust does not improve it either.   I do not see win 10 drivers on the web site.  Is this the problem?  Why doesn't win 10 recognize the monitor?  How do I correct?

    I downloaded the win 8 drivers from the Acer site, but they would not load.  I had a chat with an Acer support person which was useless.  I just revered to windows 7 (easy option in 10), and full function is restored.  I'll check the Acer site from time to time and wait for a win 10 driver.  My Windows 10 upgrade button is still showing, and a copy is reserved.  Thanks for the response.

  • Windows 7 does not recognize device

    I have been successfully connecting my 8330 to a desktop PC running XP for quite a while.  The device sw is v4.5.0.175.  I recently got a new Lenovo T410 laptop, running Windows 7.  I have downloaded the DM software (v5.0.1) and verified that my device SW is up-to-date, but the laptop is still not recognizing that the device is connected (via USB).  I've tried it in all the USB ports on the laptop, and also followed all the steps detailed in KB13146, with no luck.  I can't find anything in any of the forums that reference Windows 7.  Can anyone provide help to resolve this problem?
    Solved!
    Go to Solution.

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting atricles...hopefully something will be useful:
    http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
    KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. I can attest that DTM does indeed recognize a BB under Win7...mine is exactly so.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Windows & iTunes Does Not Recognize iPhone 4 But It Charges?

    I have an iPhone 4 16 GB Factory Unlocked. Yesterday it was fully working. I don't know why, today, my PC doesn't recognize it, even as an camera. I don't see Apple Mobile Device USB Driver listed in the device manager. Tried several programs concerned with iPhone, but no luck.
    Uninstalled everything related Apple like iTunes, Bonjour, Apple Application Support etc., and used a program called "ByeTunes". Reinstalled iTunes but it does not work. I tried plugging it to my laptop, still doesn't work.
    Also, I'm using Windows 7 x64, and re-installed Apple Mobile Device Support for 64-bit several times. It didn't work.
    However my phone charges, does not beep that plugging sound or show charging indicator but the battery level increases, when I plug it to my computer. But when I try to charge with firewire it works.
    And last, my PC can recognize my phone in DFU mode, fortunately. But I'm afraid of being stucked at restoring process.
    What should I do?
    Thanks.

    I am facing the same issue. Tried everything like, Reinstall Itunes, Tries the sync on 3 diffrent laptops with windoes 7, XP and vista, Connecting in restore mode, DFU, Apple mobile devices restarted..nothing has worked. I am not sure if i do "erase all setting and content" will help  because if the i tunes cant recognise the i phone now, then after erasing everything will it recognise to restore??
    Can any 1 help if i do " erase all setting and content" will help and will itunes recognise the iphone then?

  • Windows 7 does not recognize new laptop HDD?

    I got a new hard drive for my comuter, I went to install windows on it but the installer said is no drive there, and tells me to get the proper drivers. I don't know where to get the drivers, and it's a Western Digital so it uses the built in drivers from windows. My desktop recognizes the drive fine, but the laptop does not. Any help?

    Nevermind.  I removed the device, turned the power off and back on to let Windows reinstall the device.  That made the problem go away.  I should have tried that first.

  • Windows 8 does not recognize drivers for HP Officejet 6500 E709a Series

    I have downloaded drivers for windows 8 for my HP Officejet 6500 E709a Series printer, but the windows 8 system does not recognoze them.

    Hi,
    What is the error message ? Where do you download from ? the following file or a different file ?
       http://ftp.hp.com/pub/softlib/software12/COL31304/mp-110035-1/OJ_AIO_6500_E709_Full_Win_WW_140_408.e...
    Please download the above file then install again.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows vista does not recognize my mini

    So I got a windows vista computer and tried to connect my mini but it comes up saying USB device not recognized. ANY help is appreciated

    Hello,
    I tried it but it goes wrong while setup, I get a message to connect the webcam and does not go on, setup is waiting and can not come forth. 
    I opened all the files in the setup with Winrar and tried through Windows and it did not work.
    I know it's not your fault, it's very poorly by HP that does not have a driver for something that itself produces.
    It would be simple to download drivers when needed.
    Now I have an HP product that is not working because HP does not have drivers for all their products.
    A big fiasco from HP! 
    I say again, it's not your fault. 

Maybe you are looking for

  • Hp laserjet 5550n forgets jobs, can only print one copy of a doc at a time

    We're using a Laserjet 5550n in a small office running Mac OS X 10.3.9 to 10.4.6. We're encountering countless problems when trying to print, and I'm pretty sure I've ruled out the computer setup as the culprit (reset printing system, emptied CUPS ca

  • Header&Footer in FCC

    how to identify Header,Footer in sending side of File adapter

  • Integrate EP iVew with weblogic, problem with IE7

    hi We are integrating EP iViews within weblogic. We offer iView urls and Weblogic embed EP iViews in iFrame, which we click the link tree, different view shows in the iFrame rightside. The problem is: using IE6, iViews displays fine. while using IE7,

  • Email in Settings

    How do I customize my email in "My Settings?" I've since changed emails, and there seems to be no way to change it in my account

  • Execute a Store procedure using Database scheduler.

    Hello Experts, I want to create a Database schedule job that will trigger a stored procedure after say 60 mins Please provide any pointers or help to accomplish this. thanks