Windows 10 does not recognize the Monitor as PnP

Windows 10 has my FT220 HQL touch monitor listed as "generic" and limits the resolution.  Windows 7 recognized the monitor and offred the highest resolution the monitor supports.  The resolution in Windows 10 is very poor and it limits the resolution.  I went through the initial start up procedure as described in the Quick Guide, but it did not help.  The auto Adjust does not improve it either.   I do not see win 10 drivers on the web site.  Is this the problem?  Why doesn't win 10 recognize the monitor?  How do I correct?

I downloaded the win 8 drivers from the Acer site, but they would not load.  I had a chat with an Acer support person which was useless.  I just revered to windows 7 (easy option in 10), and full function is restored.  I'll check the Acer site from time to time and wait for a win 10 driver.  My Windows 10 upgrade button is still showing, and a copy is reserved.  Thanks for the response.

Similar Messages

  • When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

    Did you install BC drivers on the Windows side?

  • TS1500 Windows does not recognize the iPhone as existing, though iTunes can see it.

    Windows does not recognize the iPhone as existing, though iTunes can see it.

    I found a webpage where a user reported the same issue as me.
    He said he determined that "foreign pictures" -- meaning any pictures not taken using the iPhone's camera -- were the cause. Once he deleted the "foreign pictures" -- such as pictures obtained from receiving texts from others which included pictures that he saved onto the iPhone, then iTunes worked.
    In my case, the fix was to upgrade the iPhone's OS from 5.1.1 to the latest version.
    Now, both issues are solved:
    Windows recognizes the iPhone as a storage device.
    iTunes can see pictures that I've saved on the iPhone.

  • T60 hard drive replacement - Windows does not recognize the hard drive

    Hello All, new to the Lenovo Community. I have a T60 as well as newer Lenovo Edge. The HD crashed on the T60 and it will no longer boot. I just purchased a WD 500GB without doing a lot of research. In trying to install Windows 7 (I had already upgraded the T60) it will not recognize the new drive - Windows does not see the drive at all. Is there a way to get the Lenovo to recognize the WD drive? Thank you in advance for any help.
    Solved!
    Go to Solution.

    Glad I was able to help.
    Just be careful, the usual "if it doesn't fit, find a bigger hammer" doesn't apply to this model laptop.
    Also, there is a part available to adjust the frustration level, I don't happen to have the FRU number available, but I do have a photo and I'm sure you can find a local shop to provide it. Any experienced vendor should be able to match up a similar item from this photo.
    It comes in many varieties, this model has a handy extention to aid in installation so you can easily do it with one hand. Others may require two hands to safely install. Use care when installing, one slip can destroy your laptop. Acute abuse can lead to severe embarassing situations and cronic abuse can have impact on your health, so use wisely and always get a spare to share with a friend. They tend ot come conviently packaged in quantity of 6, so you can invite a few friends over.
    This invention has saved many a laptop from sailing out of windows worldwide.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Just updated to v5.0 and now Windows does not recognize the iphone

    What can I do?

    Hi there BobOtte,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    -Griff W. 

  • Computer with Windows Vista SP 2 and Desktop 5.0.0.11 does not recognize the BB via USB

    Hi all,
    I have had an 8100 for some time.  Recently the desktop will communicate to the 8100 via bluetooth but Windows does not recognize the 8100 when I plug it in via USB.  I have tried downloading and reinstall the desktop with no luck.
    Suggestions?
    Jim

    Hi and Welcome to the Forums!
    Here is the list of troubleshooting KB's...hopefully something will be useful:
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 No PIN displayed in BlackBerry Desktop Redirector
    Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
    Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these.
    Hopefully something there is helpful!
    Cheers!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Windows does not recognize ipod nano

    i cannot get windows (or itunes) to recongize my ipod nano. once in connect the ipod, i get the 'do not disconnect' message indefinately. it used to work. it reinstalled itunes, reset my ipod, etc. any suggestions?

    thanks, but the troubleshooter assumes windows is recognizing the ipod. in my case it is not. i download itune 7.0 just in case. same problem exists. in fact, since windows does not recognize the ipod, itunes eventually freezes up.

  • Windows does not recognize ipod whatsoever

    This is so frustrating.
    I just bought a new ipod video after giving up on my old ipod.
    Windows does not recognize the new ipod at all, not even as an extra drive. I'm tried uninstalling and reinstalling everything, restoring the ipod, connecting to different ports. No such luck. I've read up on the past posts concerning this problem with no luck.
    Can anyone help me?

    here's a bit here's what microsotft says:
    To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps: 1. Click Start, click Run, type regedit , and then click OK.
    2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E980-E325 11CE-BFC1-08002BE10318}
    3. On the Edit menu, click Delete, and then click OK.
    4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
    HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\4D36E967-E325-11CE-BFC1-08002BE10 318}
    5. On the Edit menu, click Delete, and then click OK.
    6. Exit Registry Editor.
    7. Restart the computer.
    it worked perfectly for me!make sure to follow the directions. it's easy and resolves many Windows XP problems related to ipods. for more info try microsoft help and support and just serch for ipod. it list a bit more info there. it doesn't say anything about reinstalling the apple software, but just to be thorough i unistalled itunes and quicktime before anything just to start with a clean slate, then reinstalled them from my ipod disk after the restart. then i downloaded all the updates from apple. my ipod has never worked better. good luck. theres no link to the page just search for ipod in windows help and support for exact wording

  • Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

    Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got  pop up saying "  "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
    Ive tried plugging this into 3 other computers same error message pops up .
    PLEASE help me . thanks (:

    Uninstall your USB drivers in your computer & reinstall.
    contact your pc manufacturer for the steps.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • One of the usb devices attached to your computer has malfunctioned, and windows does not recognize i

    I am a damsel in distress.  Every time I turn on my printer, I get ths message: "One of the USB devices attatched to your computer has malfunctionedand windows does not recognize it: . All was fine until I put in new ink today. I had not used the printer for about ten days prior to this. I went through the HP line of troubleshooting but nothing has worked. I have Windows 7 64 bit
    Thank you
    Katt

    Uninstall your USB drivers in your computer & reinstall.
    contact your pc manufacturer for the steps.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

    Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
    Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

  • Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

    Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-(  it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

    As I said above, some of the new lightning cables have been known to be causing problems for some users.  Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
    B-rock

  • When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

    I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized.  Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
    Hope this helps

  • Computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

    i have an ipod nano 7th gen and when i plug it in for itunes my computer says 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it'. what do i do?

    As I said above, some of the new lightning cables have been known to be causing problems for some users.  Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
    B-rock

  • TS1538 I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions

    . I have 6th gen iPod nano.  When I try to sync it my computer tells me it has malfunctioned and Windows does not  recognize it.  My iPhone syncs fine so the problem must be the iPod.  I have reset the iPod several times and no luck.  Any suggestions?

    Hello Alexdad,
    We've an article that can help get your iPod Nano working with your computer.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/TS3218
    Cheers,
    Allen

Maybe you are looking for

  • Music downloaded on my iPod can't be read in iTunes anymore

    Hello, I've a certain number of songs on my iPod (30Gb Photo) that were downloaded from iTunes - I still have the Music Store Receipts -, that can't be played now on iTunes ... by the side of the song in iTunes there is an exclamation point. Is there

  • Messages released from spam filter do not appear in mailbox IF released more than once.

    PLEASE HELP!! We use the Mailfoundry 2100 spam filter appliance in our organization. We are looking at alternatives for how we handle messages that this unit classifies as spam. We are running Exchange 2010 SP3 next inline to the Mailfoundry. Here is

  • FS00 Only balances in Local Currency Check box

    Hi Sap Gurus, FS00 in that there  Only balances in Local Currency Check box i want to remove the check box,but in that g/l account we have balances how to remove the check box. I have a one solution  post the account to zero balance, uncheck the flag

  • Error when assigning planning level in Treasury - Link to Cash Management

    Dear SAP Gurus, I am trying to assign the planning level in FSCM (ECC6) using this configuration path Treasury & Risk Management->Transaction Manager-> General settings-->Link to cash management--->Assign Planning Level  - but when I tried to assign

  • Pricing type Z does not copy all conditions

    Hi All, In one copy control we have pricing type Z defined. But for this order type, when we create invoice, one condition type (ZHRT) is not getting copied to invoice. When copy control is modified to use G, the same condition is copied. In my USERE