Windows 10, Driver updates, VIDEO_TDR_FAILURE (atikmpag.sys)

Windows 10, Driver updates, VIDEO_TDR_FAILURE (atikmpag.sys) Hello, Five days ago “windows update” updated the software, and from than on I had problems. The computer started normally, but after it completed the task, than restarts all over again and again. I tried to fix the problems with “safe mode”, than with “restore to previous restore points”, than “recovery” but to no vain. At the end, after I tried with image recovery and full recovery, it seems I destroyed all the software. It couldn’t start even in safe mode giving me the message it did not completed normal start before, which it wasn’t possible to do. My last rescue was to upgrade to Windows 10. It works all fine, as long I do not connect to the internet and the drivers are not updated, because the same problem starts. Windows 10 restarts all over again to fix the problem, with no results so far. In the device manager, after basic installation of Windows 10 and without updates, I have the following errors: Microsoft basic display adapterPCI simple communications controller Windows 10 gives me the following message: VIDEO_TDR_FAILURE (atikmpag.sys) My computer is HP 6200 Windows 7. It was checked and found ready for an upgrade to Windows 10. How can I fix the problem? With regards,Thomas

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Windows 10 update, and wanted to assist you! Please review the following document, to see if the issue can be resolved:HP PCs - Error Messages Display on a Blue Screen during Startup or Boot (Windows 10, 8, 7) You may have to use the Go back to an earlier build option, in your System Settings:
HP Notebook PCs - Upgrading to Windows 10
Once that is done, you can try to perform another System Recovery:HP PCs - Performing an HP system recovery (Windows 7) Please let me know if this information was helpful by clicking the thumbs up below.
Have a great day!

Similar Messages

Windows 8 Driver update for LaserJet p2014/2014n, cp1215/cp1217, m1120/m1120n MFP, m1319f MFP

The Windows 8 drivers for the following products are not available yet. In the meantime, customers can install and use published Windows 7 drivers on full Windows 8 OS's. However, the following known issues are listed below. Please be aware this is a temporary work around and customers are encouraged to download Windows 8 drivers as soon as they become available.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
This question was solved.
View Solution.

Driver update:
m1005
m1120
m1319
cp1215
cp1217
p1007
p1005
p1505
p2014
The above drivers are now available for download. Just click on the links to be taken to their product home pages.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Windows hard drive update

I am getting a message on my laptop screen upon turning it on that my driver needs updating. I don't know where it's from; but it has a "!" - is this a legitimate windows or hp communication?

I just sent you a pic I took with my smart phone of the culprit. To be honest, I don't feel comfortable downloading from the site you sent. There are too many options and when I pressed what I thought was a free option, it comes up with which option am I talking about?? and what did I pay for it.... So, I am back to square one. I went online with my Norton anti virus and did a scan with Norton erase, no change. It's there. Thank you for your suggestion. If I figure out a way to work with it, I'll let you know. If you have any suggestions, please advise.

After opening firefox, perhaps a minute later, a website called DRIVER UPDATE appears. How does this happen, and how do I stop this?

It has nothing to do with the home page which is set for Google. The long delay between opening with Google and the appearence of Windows Vista Drivers, which is a Slimware utility, is not understandable to me.

Hello,
Unfortunately it sounds like you have a virus on your computer. Try following one of these guides to remove it (I am not sure which one you are affected by, but the first one doesn't seem to affect Vista?):
* http://www.fixyourbrowser.com/removal-instructions/remove-windows-7-driver-update-pop-ads-virus-removal-guide/
* http://www.fixyourbrowser.com/removal-instructions/remove-update-windows-drivers-now-ads-easy-removal-guide/
Both have similar steps and use free antimalware software such as:
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
Good luck with the removal.

VIDEO_TDR_FAILURE (igdkmd64.sys) crashing my NEW laptop and BSOD while gaming Windows 10

Recently I bought a new laptop, Lenovo Y50, and had no issues with it. I started playing a game called "Path of Exile" and while in the middle of the game it would freeze and then cause my laptop to crash into BSOD and give me the error message VIDEO_TDR_FAILURE (igdkmd64.sys) which looked like this:
Link to image
https://communities.intel.com/servlet/JiveServlet/showImage/2-255820-239358/bsod2.jpg
I have searched through for assistance but found no resolution in the attempts I made. The most recent attempt was uninstalling the Intel Driver but that just lowered my FPS entirely. So I reinstalled and the problem came up again and then I foolishly shut my laptop off before it hit the BSOD and when I booted it back up then screen was all black and not changing. Scared of ruining my new computer, I hard shut down the laptop once again and then it booted up normally, only that it was much slower. Have I damaged my laptop? If so, what steps do I need to take? And yes, I have insurance.
Specs:
Processor 4th Generation Intel Core i7-4720HQ Processor (2.60GHz 1600MHz 6MB)
Operating system Windows 8.1 64 originally but updated to windows 10
Display 15.6" FHD IPS LED Backlight (1920x1080)
Graphics NVIDIA GeForce GTX 860M 4GB
Memory 16.0GB PC3-12800 DDR3L SDRAM 1600 MHz
Hard Drive Hybrid 1TB 5400 RPM+8GB SSHD
Network Card Intel® Dual Band Wireless-AC 3160
I have posted for assistance on the following websites: Microsoft, Lenovo, Intel, and Yahoo. Thank you for your assistance.
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

I have the same issue with my Y50 laptop after updating to windows 10. For me there is one more problem in the chrome browser: image shaking on videos and gifs..I also tried to clean install windows 10, remove and reinstall drivers for intel and nvidia with no result.Maybe intell will update the drivers soon...

WinDbg(x64) can't install 1394 Windows Debug Driver (1394kdbg.sys)

I am unable to get kernel mode debugging with a 1394 connection to target working.
When using WinDbg(x64) to start kernel debugging, the Windows Debug Driver (1394kdbg.sys) driver fails to install. Note that I am executing WinDbg by selecting "Run As Administrator".
WinDbg reports ...
Failed to install 1394 device driver. Error 0xE000020B.
I am using Visual Studio 2013 w/Update 4 and DDK V8.1 w/Update 1. My platform is 64-bit Windows 7 Professional.
After attempting the driver install, the "1394 Windows Debug Driver" status in Device Manager has a yellow triangle bang status, and the device status is "Windows cannot load the device driver for this hardware. The driver may be corrupted
or missing. (Code 39)".
I have ...
1. uninstalled the DDK and re-installed it.
2. Manually uninstalled the driver and the 1394 Bus Host Controller driver and re-installed both (many times).
3. Replicated the exact problem on another system which has a different 1394 Bus Host Controller.
4. Found this link "http://www.osronline.com/showthread.cfm?link=249979" that exactly describes my situation as well. Unfortunately, his solution was to install version 7 of the DDK.
Is there some issue with that driver?
Any help will be greatly appreciated.

Hello,
I have found a solution that works for me:
I installed WDK 8 - onto a different Windows system, just to be sure to not mess up the WDK 8.1 installation on my development machine. After that I made a backup of the folder c:\Program Files (x86)\Windows Kits\8.1\Debuggers\x64\1394 on the development
system and replaced its content with the files from the appropriate directory in the WDK 8 installation path.
After manually uninstalling the driver for the 1394 Debugger Device and restarting Windows on the development system the driver installation initiated by the first attachment of the kernel debugger to the debuggee succeeded and debugging via Firewire is
now working as it should ...
Regards
Martin

HP Envy dvd drive issues after the Windows 8.1 update

I have a HP Envy and after the Windows 8.1 update the dvd drive is not working. I can see the drve but it is difficult to get the drive to open or recognise there is a disc in it. What can I do?

Hello @Jenino,
I understand that you are having issues with the Optical Drive on your HP ENVY 7 PC. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Problem with iPhone 6 driver on Windows 8.1 Update

Hi guys,
Each new device brings new questions: in my case, it's about Windows 8.1 Update (64-bit) not being able to install the proper driver for my new iPhone 6.
Strangely, I don't have any problem syncing my phone with iTunes via USB, but that won't work over WiFi, and when I plug it into one of the PC's USB ports, I get this window stating that Windows is trying to install the proper driver, but it hangs, then fails.
Of course, the phone shows in Windows Explorer, but when I double-click on the icon, it shows as empty.
Have you guys experienced the same thing?

Hey Jeff,
Now that you mention it, I may have botched the job when I reinstalled iTunes on that PC: I don't remember allowing the install of the Apple Mobile Device Support...
I'll give it a go and holler if things go South...

No sound recorded on the internal microphone after SoundMAX driver update (Windows XP)

My internal microphone is not picking up sound after I upgraded my SoundMAX driver (available from the Lenovo website here) to version 5.10.1.571.* It looks like this was a problem before and was supposedly fixed in 5.10.1.5520 which is included in the version I have.
I have tested the audio through the Control Panel utility, i.e., Sounds and Audio Devices Properties - Voice - Test hardware. No dice: my voice could not be detected. I also tested via the Windows XP sound recorder utility, i.e., Accessories - Entertainment - Sound Recorder. Same result: silence.
In the Control Panel's Sounds and Audio Devices Properties, I have verified that the Default device for Audio and Voice (playback and recording) all are set to "SoundMAX HD Audio." The SoundMAX software that ships with this laptop (also called "control panel") is very scaled back. There doesn't appear to be anything interesting there to adjust.
Thanks in advance.
* I updated the driver because I was troubleshooting my original problem. My plug and play Logitech laptop speaker suddenly stopped working. Alas, that problems remains and I have created a new one.

Hello,
Here versions of the Audio Features for Windows XP driver that I was able to find:
5.10.1.5410 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka112ww.exe
5.10.1.5520 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka114ww.exe
5.10.1.5670 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka113ww.exe
5.10.1.5710 - download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/7ka116ww.exe
Hopefully, one of these will work for you.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows 8 32-bit driver update

Recently, I've use BootCamp for 2 years. Might be I should explain from beginning but sorry for the long explaination. I used OS X Snow Leopard 10.6.8. on 2011 then I started to use Windows using BootCamp. So I installed Windows XP. After several months, I stopped using Windows XP because I found out that Windows 7 64-bit have better system to run games. But Apple shows that MacBook Mid 2010 with 2GB RAM can't support 64-bit version. So I update it to OS X Mountain Lion on 2012 for upcoming years to become secondary. I didn't bother about the 64-bit version can't run on my Mac. So I proceed the installation, before I installed Windows 7 64bit, I installed Windows 7 32bit and it run perfectly but some quite usually when running PC games like Assassin Creed Brotherhood = the flag on top of Castel Sant'angelo don't wave and when run Autorun there so sound (some installation of apps/games) + decrease of visual performance even though installed the latest update driver. So I just installed 64bit version. After the installation, I installed the driver updates and everything including PC games and latest DirectX. It works 100000% perfectly than 32bit version like more features, more interaction in games, more realistic graphics and stunning graphics visual. Later then on late 2013, I purchased a legit copy of Windows 8 Pro 32bit. I install Windows 8 Pro but there seems a problem during installation. It says my Mac can't support Windows 8 and it seems my Mac still read its OS X as half Snow Leopard and half Mountain Lion even though BootCamp 5. Then I reformat my Mac into OS X Mountain Lion and after that I can proceed the Windows 8 installation. After installation, I tried to install the driver updates but cannot. I began to search for the latest update. I found that only Windows 8 64bit version only support but my Mac works fine on Windows 8 Pro 32-bit. No problem but no sounds and brightness to too high which hurts my eye. Run PC games 1000000000% perfectly and better graphics visual on Assassin Creed 3, Dead Island, The Elder Scrolls V Skyrim, Modern Warfare 2(all settings is highest), Modern Warfare 3(800x600 resolution) and Assassin Creed Brotherhood(all settings is highest). I didnt download the update. I leave it. Please make an update driver for Windows 8 Pro 32bit on MacBook Mid 2010. It just works fine, no problem just the update drivers for sounds and the brightness.

I'm sorry but this was very difficult to read. If I understand you are having an issue installing Windows 8 32-bit. Is this right?
If so this is not supported as per http://support.apple.com/kb/HT5628. Specifically: "If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp."

IDT High Definition (HD) Audio Driver problem after windows 8.1 update 1.

Hello. I have HP Probook 4730s. After I installed Windows 8.1 update 1 the sound driver stopped working properly. When I want to play some music, video or even system sounds, sound appears after 1-2 minutes. At that time HDD usage is 100% cause of windows audio device graph isolation. I’ve installed that IDT High Definition (HD) Audio Driver from HP’s driver support site, but that’s not working. As I see in device manager driver’s release date is 24.10.2012. I think, it’s too old for Windows 8.1. Can you help me? Is there any other newer version of that sound driver? Also I’m sending two pictures where are HDD usage and driver release date.

Hello GDartsimelia,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after you installed Windows 8.1 on your notebook computer, the sound driver stopped working properly, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
I followed the FAQ troubleshooting and that didn't help

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Dolby Home Theater V4 changed to Dolby Digital Plus after Realtek Audio Driver update Windows 8.1

Hi,I'm now using Ideapad Z510. After upgraded to Windows 8.1. I'd went to the Lenovo website searching for new driver update.
But, after i install the "Realtek Audio Driver 6.0.1.7023", the "Dolby Home Theater V4" is not running(audio sound not playing through).And, the "Dolby Digital Plus" is running instead of "Dolby Home Theater V4".
Then, when I try to reinstall the older version "Realtek Audio Driver 6.0.1.6954" from Lenovo website, the "Dolby Home Theater V4" is running again.
Truly, the "Dolby Digital Plus"'s sound is crisper and louder than "Dolby Home Theater V4". But the sound of "Dolby Home Theater V4" has more bass and more function (like Graphic Equalizer, more Intelligent Equalizer etc.).
Is this an update or what?
What should I choose?The newer driver (for Windows 8.1) or older driver (for Dolby Home Theater V4)? Thanks. (confused now) @@

Hi all
Could you try out DAA or DHTLightweight from my link and just install the Dolby software without overriding your Realtek Driver? I am not sure whether would it work, but worth a try. I have tried on Y460, W520 and G560 with great experience.
If the older Dolby software does not work with your existing Realtek driver, you could install the DAA or DHTLightweight with their driver to overwrite and see how it goes.
Thank You
Peter
ThinkPad W520 | ThinkCentre E73 SFF | IdeaPad K1 | IdeaPad Yoga 11s | Miix 2 10" | 3000 Y300 | Yoga Tablet 2 Pro
Give kudos to reward people for their assistance | Mark thread solved if the solution works | Please do not send me an e-mail regarding technical questions | I am not an Lenovo employee
=====================================
Dolby ; IdeaPad Slate Tablet

[MB Air 2013] Windows 8 says I need a Boot Camp driver update, but download is unsupported

Hi all,
I'm on a brand new 2013 MB Air running Windows 8 64 bit with Boot Camp.
Windows is running fine, but I just recently noticed that I had a message telling me I had a driver missing and needed to update Boot Camp.
Now, this computer is less than 1 week old, so I checked my Boot Camp verison first and it does say that I'm running Boot Camp 5.
Just to compare the drivers, I downloaded the suggested update (from Apple, Boot Camp 5.0.5033) and put it on an extra USB drive.
When I compared the drivers, the new download did contain significantly more drivers for various hardware(most of which I don't have), so I tried to run it from the USB drive.
At that point I got the "Boot Camp x64 is unsupported on this computer model error".
I'm running Windows 8 64 bit, so I don't see why BCx64 is unsupported, and I'd really like to get the "driver update needed" message resolved.
Am I being directed to the wrong dowload? Do I even need this one?
Should I be running an update through OS X even though the message is coming from Windows 8?
Any ideas on how to proceed would be appreciated.
Thanks!

The actual answer is if you look at the download page at the bottom, you will see a link for supported devices. You will notice that the Macbook Air 2013 is NOT listed.
This upgrade does not apply for the newer MAcBook Air. The current driver set you have is correct. No upgrade is necessary. It is only for the older Macbook Airs.
Hope this helps.

Hp pavilion dv5 driver updates windows 7

Begging for help:
I have recently changed my system operation from windows vista to windows 7 . but my laptop doesnt recognize some of drivers. and I'm not able to update the drives as windows doesn't know them. what can i do to solve my problem?
I couldnt find driver updates for windows 7 on hp website.
Tnx in advance
This question was solved.
View Solution.

Hi,
Can you post back with the following details.
1. The full Model No. and Product No. of your dv5 series notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Windows 10, Driver updates, VIDEO_TDR_FAILURE (atikmpag.sys)

Similar Messages

Maybe you are looking for