Windows 10 Enterprise Preview and Hyper-V Gen 2

If I try to install the Windows 10 Enterprise x64 preview on a Hyper-V Generation 2 VM, it fails to boot from the ISO with a SCSI error immediately. The error says Synthetic SCSI controller Failed to power on with Error 'The version does not support this
version of the file format."
Is this isolated or is everyone seeing this?

If I try to install the Windows 10 Enterprise x64 preview on a Hyper-V Generation 2 VM, it fails to boot from the ISO with a SCSI error immediately. The error says Synthetic SCSI controller Failed to power on with Error 'The version does not support
this version of the file format."
Is this isolated or is everyone seeing this?
The same happened to me.
No problem with a Gen1 VM.
Dave

Similar Messages

  • Accessing USB device in Windows 10 Tech Preview under Hyper-v

    I am using Windows 10 Technical Preview in a VM created with Hyper-V on a Windows 8.1 machine, and accessing the VM with Remote Desktop Connection.  In RDC, I have set the local resources to include ports and "other PnP devices," but I still
    cannot see my USB Microsoft LifeCam.  The camera works fine on the host, but in Windows 10 I get a message that says, "To get started, connect a camera."
    What setting do I need to change in order to access this device in the VM?
    Thanks!
    MW

    Hi,
    Since USB drive could be work properly, VM and RDP settings should be ok. For this problem, it is probably a driver compatibility problem, it would be better to contact LifeCam support to confirm the problem:
    http://www.microsoft.com/hardware/en-in/support/contact-us
    Roger Lu
    TechNet Community Support

  • I installed Windows 8 Consumer Preview and after that I cannot run OS Lion. How can I recover options to boot back in OS Lion?

    I tried to reboot from CD or USB and the Mac Mini simply bypasses it to Windows 8 Consumer Preview.
    How can I avoid to Windows 8 boot and have the options to select OS Lion?
    I used Boot Camp as shown in many videos. I did not select any additional OSX drivers for install.
    Thanks,
    Marcio

    I am stuck in Windows 8. I cannot boot back to LION. HELP!!! I am in Microsoft World again and no option to get back.
    how can I install boot camp 4 in Windows 8 so I can reconfigure my computer back?

  • Windows 10 Technical Preview and REFS-formatting.

    Why does Windows 10 TP not provide for formatting in REFS? It is very inconvenient to have to go to Windows Recovery Environment each time you need to format a drive in REFS.
    Vladimir Shipitsyn

    Hi all,
    Currently, the file system in Windows 10 technical preview is same with Windows 8.1.
    The Windows Server Technical Preview has the same file system with Windows Server 2012 R2.
    I suggest you submit the feedback via our feedback app to report your request:
    Updates and feedback
    http://windows.microsoft.com/en-us/windows/preview-how-to#how-to=tab7
    Alex Zhao
    TechNet Community Support

  • Windows 8.1 Prof and Hyper-v Server 2012 R2 core export snapshot hile VM is running

    Hi,
    I have ugraed my client to Windws 8.1 prof. After some digging i found out that it was posible to export a snapshot(if you have multiple snapshot) while using Hyper-v manager in windows 8.1 to a Hyper-v 2012R2 server. In my old pc win 7 prof i had the option
    to export but it didt work on running VM. On the win 8.1 i dont have that options? am  i missing some updates?
    Any tips? fix?

    Hi Martinbt,
    >>In my old pc win 7 prof i had the option to export but it didt work on running VM. On the win 8.1
    i dont have that options? am  i missing some updates?
    As you mentioned "it was possible to export snapshot " , but then you said you don't have that
    option .
    Could you please detail what is your goal ?
    ( "snapshot" equal to "checkpoint" )
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows 10 Technical Preview and ISCSI

    Is there a version of ISCSI Initiator that is compatible with Windows 10 Technical Preview?

    Hi Newton Tiberius,
    Rick Dee is right, Microsoft iSCSI Initiator is installed natively on Windows 10 Technical Preview.
    Please make sure the ISCSI service is running background:
    Then search ISCSI you can get a result of set up ISCSI Initiator:
    Alex Zhao
    TechNet Community Support

  • IE 11 on Windows 7 Enterprise 32 and 64 bit

    I'm testing IE 11 for sites my company uses to conduct business. I've tested IE on both Domain joined and non-domain joined work stations. I have an issue where IE 11 doesn't display the notification bar for certificate errors, downloads, or ActiveX controls.
    We do have a few sites that we want to run in Enterprise mode, so that is enabled in the Local Computer Policy. There are no other settings configured in the Local Computer policy for Internet Explorer. I'm seeing the same behavior on both Windows x86 and
    x64. The only strange behavior I've noticed is that after upgrading to IE 11, the Internet Explorer administrative templates fail to load. I get an error reporting a problem at line 795 column 308 regarding the Advanced_EnableSSL3Fallback entry. It states
    that the reference couldn't be found. IE 8 and 9 both work for the sites we are using and both display the notification bar as expected. I've tried enabling Mixed content, unsigned ActiveX controls, initialize and script ActiveX controls not marked as safe, disabling
    Protected mode, enabling the prompting of ActiveX controls, and disabling Prevent ignoring Certificate errors. Nothing I have found has corrected the issue. Does anyone have any suggestions?
    Jason M. Woody

    Hi Don,
    I copied in the latest inetres.adml and still get the error on my GPO's.
    An error has occurred while collecting data for Administrative Templates.
    The following errors were encountered:
    Resource '$(string.Advanced_EnableSSL3Fallback)' referenced in attribute displayName could not be found. File C:\Windows\PolicyDefinitions\inetres.admx, line 795, column 308
    is there a step I am missing?
    Regards
    There is a newer version of INETRES.ADMX/ADML available since February 2015, via 3036197 or MS15-009/http://support.microsoft.com/kb/3021952 which includes the settings for disabling SSL3.0 Fallback,
    so you'll need the INETRES files from that update, as a matched pair of files, to resolve this symptom.
    Also, note that MSFT have just (in the last 24 hours) released a new CU for IE which is MS15-018/3032359, but that is still making its way through the MSFT publishing system. (because of which, I can't confirm if there might be yet another updated INETRES
    fileset pair)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Windows 8.1 Metro and Hyper-V

    I am running Windows 8.1 Pro on my laptop. For testing purposes I have Hyper-V installed. It seems though when I have Hyper-V installed and associate a Virtual Switch to my wireless card to give internet access to guests in Hyper-V the Metro apps
    stop communicating to the internet through the wireless. I can plug into the Ethernet and it works fine, but as this laptop is mostly portable I don't have the opportunity to use Ethernet that often. Also even after removing the virtual switch they still don't
    have access. The only way to get the Metro side to start working is to uninstall Hyper-V then it works fine over WiFi.
    I've tried new Drivers and Firmware and my laptop is completely up to date with Windows Updates.
    I know some of you must have the same setup, has anyone seen this issue and or have a solution?

    You were right, I tried my wireless network at home and it worked, it's a D-Link. So I went back to the office and it didn't work, Netgear WPN824v3. For complete confirmation I tried another Netgear, different model, that I keep around for testing and it
    worked as well. It seems there is something with the software on the WPN824v3 that makes it not work, unfortunately I'm also on the latest version.
    Well it's old so I guess I can't complain to much, in my office we just don't do that much wireless stuff to justify a fancy business class AP. For the time being I simply disabled the DHCP on the office wireless router and let it run
    through it's own VLAN through an open port on my Firewall, this allows my laptop Metro apps to communicate to the internet. I've been meaning to do this for awhile to get some insight as to what exactly is happening on my wireless network. I would just be
    very curious as to what could've caused this in the software.
    Thank you very much for your help!

  • I use Windows 7 enterprise edition, and I have not been able to make Firefox on my machine. As soon as I open a website, it becomes unresponsive

    Since 6 months, as soon as I open Firefox and type in a website, it just freezes. Its stops loading the website and also the whole firefox window freezes : it does not minimize and neither it pop backs. I have tried all the resolutions provided but none of them work for me. Really bad. If soon this does not resolve, I will trash out Firefox permanently from my laptop - though I do not want to do this :(

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Windows 8 Consumer Preview and Adobe CS4

    I know this is pre-release, but am hopeful anyway. I've installed CS4 onto my Windows 8 CP installation but am having problems with several programs:
    Dreamweaver has a problem with 'Dreamweaver encountered problems while constructing the menus from the current menus.xml file.' and won't start.
    Photoshop (both 32 and 64-bit) has a runtime error and stops working 'Adobe Photoshop CS4 has stopped working'.
    Illustrator was having a problem loading plugins, but now I get nothing at all!
    I think this all has something to do with permissions. When I visit c:/Users/Username/Appdata/Adobe/Dreamweaver CS4/ I am warned I cannot access this. I delve a little deeper with the security tab and see there is no owner, so add my machine as the owner and I can access the folder. It's empty, however. The same applies to the folders for the other programs in the suite.
    Any ideas? I've reinstalled three times and it makes no difference.
    Clive

    mrportman - Were you able to get it running? I also want to upgrade from 7 to Windows 8 but the Windows Upgrade Assistant says CS4 is not compatible. AS it standsd now CS4 is not upgradeable to current version so would force me to pay full price of ~$2k for Web Premium - ouch!
    Did you find a way to run CS4 on Win 8?
    The MSft resource at link below is unhelpful, to say the least, as the tables plasters the "compatible" icon even when most user votes reveal otherwise...
    https://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithU pdatedFilters?TempOsid=win8&Type=Both&CurrentPage=0&TotalPages=4&SortCriteria=Relevance&Sh owCriteria=0&Compatibility=All&TextSearch=cs4&ProductName=cs4&LastRequested=5&Locale=en-us

  • HT201413 Hi, on windows 7 enterprise version and it can see my 7th generation nano but when I go into i-tunes, the nano doesn't appear. Have tried troubleshooting with no luck, any advice? Thanks

    I-tunes can't locate my nano 7th generation on windows 7 laptop, any ideas? Looked at troubleshooting and tried but with no luck. Thanks

    The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac.  It will appear in "Finder", which is in your Dock.
    Hope this helps

  • X1 Carbon Touch 3rd Generation-Running Windows 8.1, Windows 10 Tech Preview and Android Lollipop

    I'm fortunate to have received a  X1 Carbon from Lenovo to install various operating systems and see how they run. You can see the detailed specs. on this machine in sarbin's earlier article here.
    he X1 Carbon is a culmination of a 10 year odyssey of Lenovo acquiring IBM's PC division and this PC lives up to its ThinkPad name with flying colors. Here is an X32 and an X41T circa 2005 alongside the X1 Carbon.
     

    Kudos!  Great article, answered all my questions.  Believe I'm ready to go for it now . . .Windows 10 that is! Thanks.

  • Windows 10 Technical Preview and NVIDIA Quadro K610M

    Can not get display drivers to work.
    System is an HP ZBook 17.  F2Q33UT#ABA
    Build 9926

    To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
    If you design your question effectively, you can get good information from people who are knowledgeable about the topic and who are happy to help you.
    Prepare your question. Think it through. Hasty-sounding questions get hasty answers, or none at all.
    What troubleshooting have you done so far?
    Asking an effective question will get you help faster read how here
    Suggestions for asking for help on a site.
    http://www.catb.org/~esr/faqs/smart-questions.html
    Wanikiya and Dyami--Team Zigzag

  • Windows Server Technical Preview - RDS - RemoteFX 3D

    Hi Windows Server Team,
    I am having an issue with the Windows Server Tech Preview and Remotefx 3D. I installed the RDS role and have it all configured with no problems. I loaded a VM of Windows 10 Enterprise Tech Preview. It works fine, however when I activate the RemoteFX 3D on
    that virtual machine. It then just shows a black screen in my Hyper-V Manager and just stays hung on the black screen. I have been working with RDS and RemoteFX 3D since the Windows 2008 R2 days and have never had this problem at all. When I try to Shut down
    the VM it stays hung when I try to Turn Off the VM it stays hung. I am forced to reboot the server and when it comes back up it still just shows a Black screen for the Windows 10 Enterprise VM with RemoteFX 3D turned on. I really wanted and was interested
    in testing the new OpenGL features and other ehancements that have been mentioned with this version of RDS and remotefx 3d. I also noticed that Gen 2 VM's now also support the RemoteFX 3D features and even tried to create a Windows 10 Enterprise as a
    Gen 2 VM but I have the same problem. My server is a Dell PowerEdge R720. Thanks and I look forward to your reply and can hopefully get this working.
    Regards,
    Robi Rodriguez

    Hi,
    Thank you for posting in Windows Server Forum.
    Initially we need to check whether the device is supported for latest version of features available. To use new feature available with Windows Serer Technical Preview we need to see that device supports the latest available OS. Please go through
    this article for information. You can contact Dell for further information whether it
    still have any updates for Windows Server Technical Preview.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Windows 10 Enyerprise Preview - System Center 2012 R2 End Point Protection Cannot be installed

    Hi
    I tried to install the System Center Config Manager client on Windows 10 Enterprise Preview edition and able to only install the Config mgr client.  End point protection error wrong OS version.
    Can some one advise me.
    Shri

    It is known issue and since it is Technical Preview not only SCEP but also you are unable to install other Anti-Malware software. You may use Windows Defender which build into Windows 10 TP and it is full Anti-Malware protection.

Maybe you are looking for