Windows 10 Errors (Keyboard LEDs, SATA 3, USB 3, Graphics and Display)

hi i`m omid from iran
my last win was 8.1 and i don`t change my pc`s devices and i installed win 10 and some errors occurs as following:
1.my KEYBOARD`s LED turns off when i enter win 10
2.win 10 doesn`t support completely SATA 3 means that when you use HDD SATA 3 with SATA 3 cable so windows speed reduces
3.win 10 doesn`t support completely USB 3 means that doesn`n detect some devices with updated driver
4.win 10 have problem win monitor when you are in game and exit the resolution remains like game`s environment and doesn`t change
5.monitor`s screen degausses every 5 hours means that screen vibrates some time because of problem for few seconds

Hi Omid.
This is most probably because you don't have updated drivers for Windows 10.
Do you have a PC or laptop?This is still a Technical Preview, to test and try the new OS.
You can try to update drivers/firmware, but I am not sure that manufacturer will have drivers for Windows 10.
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Similar Messages

  • How received the following error message:  iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998).  I did what was requested and reinstalled iTunes, but still get this error message.  Help!

    My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)".  I did what was requested and reinstalled iTunes, but still get this error message.  Help!

    b noir I never got any message about an entry point
    Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Been using iTunes for many years. Now Error 7 (Windows error 127) says i never installed iTunes correctly and I can't access.

    My old computer quit letting me access my iTunes library. This came up on the screen "The procedure entry point ADiAdID_AcquireMatchSlotIfNeessary could not be located in the dynamic linc library iAdCore.dll."  Then it told me, "iTunes was not installed correctly. Please reinstall iTunes. Error 7(Windows error 127)." I have been using my library for more than 10 years.  How can I resolve this?

    Click here and follow the instructions.
    (98818)

  • Boot camp 3.2 windows xp keyboard wire does not work key volume and brightness, etc.

    I bought today a new apple keyboard with wire.
    The old keyboard had a broken button, but the control keys f1-f12 all worked with both os mac or os both windows.
    Now I change the keyboard, but I do not work anymore keys f1-f12 under Windows XP, but they work under Snow Leopard.
    I updated bootcamp in XP until version 3.2, but the problem remained.
    What can I do?
    best regards

    Adding to the above: I also tried plugging in an Microsoft USB keyboard at the point when Windows freezes at the Windows log-in screen. The keyboard is not recognized and the only way I can leave this screen is to power-off the computer.

  • Last night installed Photoshop CC and lightroom then installed Nik collection and the only two out of the lot that seem to be working  is Vivez and Define the others crash with a windows error not able launch ...need help and keep in mine I an not a techi

    Asking for assistance with the above topic

    I got it working with the help of Live Chat tech support. There was some sort of error happening with my graphics driver... something that was not a problem with my previous version of Photoshop was now a problem with the new version. I updated the graphic card driver and software via the manufacturer's website and that helped me get through.
    After updating the driver... at first it felt like I was going backward a bit... I got an expired trial period error again on opening Photoshop the first time, but then I tried again logging out and logging back in to CC as noted previously ( http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately- launch.html ) ... and this time that helped fix the trial error and this time that was not followed by crashing (thanks to the graphics driver update).
    I have an ATI Radeon HD 5670 graphics card. The previous version of the driver I was running did not work with Photoshop CC. I have now updated the driver to version 12.104.0.0 and everything is working now.
    Thanks to the Live Chat technician who quickly identified my graphics card as the issue!

  • An error occured while created webi rpt on BEx and displaying data?

    Hi Experts,
    I have a problem which many couldnt able to provide a better solution and solve it.
    Need your expert solutions.
    Installed SAP BI with BO(R/3) integration kit SP3.
    Created WEBI report on BEx report via Universe. While trying to load/ refresh/ retrieving the data for display it is throwing an  error message like the mentioned below.
    Query1: UniverseOnSAPBEx2
    A database error occurred. The Database error text is: The MDX query SELECT { [Measures].[ZPrice] } ON COLUMNS, NON EMPTY CROSSJOIN( [ZVNAME].[LEVEL00].MEMBERS, [ZVID1].[LEVEL00].MEMBERS) ON ROWS FROM [$ZICTEST] failed to execute with the error.
    UNKNOWN error. (WIS 10901)
    Some fields in the Cube/ BEx/ Universe/ WEBI that i have used are ZPrice, ZVendorId, ZVendorName etc.
    Regards

    this looks like an issue with
    "SAP BI and BO(R/3) with integration kit sp3"
    I think there may be a better forum

  • How to get data from usb barcode scanner and display on GUI

    pls anyone with ideas on how to communicate with usb barcode scanner

    http://www.google.com/search?hl=en&q=java+usb+barcode+scanner&btnG=Google+Search

  • font color="2200cc" Apple USB Power Supply and Display Flicker /font

    When charging my iPod touch using my Apple iPod Mains/USB charger the screen flickers gently throughout the charge. I've tried this on two entirely seperate power supplies (one in Wiltshire, one in Gloucestershire) and both are the same. I don't have immediate access to a different Mains/USB charger to try that though. 
    There is never any flickering when charging via my iMac and never noticed any issues charging our Nanos on the Apple Mains/USB charger.
    Has anyone else noticed this or am I alone?
    cheers
    mrtotes

    I'm living in the US and have the exact same issue. Regardless of the power source and cable (I charge through iMac G5, Macbook, and car charger with three different cables), the same problem is observed. flickering is evident when Safari is loading page when brightness is at the lowest with or without being connected via cable.
    However, I sometimes can't replicate the problem when not on cable. I'm trying to find what's causing it but not clear at this point. I talked to Apple support but the guy on the phone couldn't figure out what's causing it and recommended me to go to see genius.
    I hope this is a software issue rather than hardware.

  • Windows error when plugging in video ipod - device has malfunctioned

    Hello all, I'm hoping someone here will be able to help with this problem.
    I've had my 30gb video ipod for just over six months (bought online at the apple website) and it's worked fine up until about a week ago.
    I plugged it into my pc as usual but then got the following windows error.
    'One of the USB devices attached to this computer has malfunctioned and Windows does not recognise it.'
    In case it's relevant my pc is running win xp media edition.
    Now after reading the FAQ's I've tried connecting the ipod to 4 other desktops and one laptop and I get the same error message on all of them.
    I've also tried switching the ipod to 'disk mode' but I still get the same error message when plugging the ipod into my pc.
    Apart from these errors the ipod itself will still play all the music and videos that I have on it and my fm transmitter that I bought for it still works as well.
    Does anyone have any suggestions as to what I can try? As far as I can see the only way to format the ipod is via the pc but I cannot get any pc to recognise it so I'm stuck!
    Any help you could chuck my way would be appreciated.
    Regards
    Rich

    Anybody got any ideas please?

  • ITunes reinstallation brings ''error 7 - Windows error 126'

    I had to de-install and re-install iTunes (version 11.1.4 64bit) on Windows-8.1. At the end of the installation  process I got the message: "Service 'Apple mobile device' could not be started. Please check wheather you have sufficient authorization to start the system-services" (translated from German). This came though I was logged on as Systems Administrator. When I started the Task-Manager as Systems Administrator and tried to start 'Apple mobile device' I got the message "the service does not respond in time tot he start or control request. Error 1053)"
    If I ignore the message above and try o start iTunes I get immediately "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)". This happens whenever I de- and re-install iTunes.
    Could you please help.
    Thanks in advance
    Hans M.

    I'm happy to tell you that "Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8",
    http://support.apple.com/kb/ht1923 solved my problem.
    Great many thanks to whoever created this procedure!
    There is one additional remark though: In order to remove the specified folders you have to be logged on as Administrator, knowing the Administrator's password is not sufficient. Anyway, I'm tremendously grateful to you supporters!
    Hans M. 

  • I can not open iTunes. It started when an upgrade appeared. Now I get this message when I try to open itunes. can not find MSVCR80.dll     Then I get ERROR 7 (windows error 126)   I tried reinstalling iTunes but that did not help. Please Help Me!

    I can not open itunes on my computer. It started when an upgrade appeared. Now I get a message that states This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem. I tried to reinsall the application but it did not help. I also get a message iTunes was not installed correctly. Please reinstall iTunes   Error 7 (Windows error 126)   Please Help me!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99623)

  • My computer froze and I had no choice but to turn it off. When I turned it back on, it would no longer open iTunes. It says "error 7 (windows error 14001). iTunes said to uninstall and then reinstall iTunes. Windows installer won't work.

    My computer froze, so I had to finally turn it off. When I turned it on again, it wouldn't open iTunes. Error7 (Windows error 14001) appeared. I could not uninstall and reinstall iTunes because now Windows Installer isn't working either. Tried using "System Restore" from a backup, but still didn't fix problem. Tried online purchase of registry cleanup ("Error End"), but that didn't solve problem either.
    How can I get iTunes to open? Any suggestions for getting Windows Installer to work? Thanks!

    Hey Carolefromthelou,
    The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • I constantly get Error 7 (windows error 5) message.  I have installed and uninstalled repeatedly.  Any chance of getting Itunes on Windows 8.1?

    I had the older version of ITunes and then it disappeared.  When I try to install the new version, I keep getting "unable to install ITunes, Error 7 (windows error 5) message.  I have repeatedly installed and uninstalled iTunes without luck.  Any chance of actually getting this on Windows 8.1 or not?  I am assuming I also lost my library during this.

    Hey there Stardust37,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the iTunes installation issue alert message that you’re seeing on your PC.
    iTunes for Windows: "Error 7" message when opening iTunes - Apple Support
    Cheers,
    -Jason

  • Firefox V4 opens Windows error message "Cannot find...."

    I updated Firefox to version 4. Now, every time I open Firefox a Windows Error popup appears stating...
    Windows cannot find
    'https://login.yahoo.com/config/login_verify2?.intl=us&rand=832809823&i=IWZkZHNKIXRzZnNydEpidXV4dSF0ZEqOZHh4fH5iU356YmNYcnM%3d&.src=ym'
    In spite of the error message, Firefox proceeds to open normally and takes me to Yahoo.com. Closing the error message has no affect pro or con...so, the message is merely a nuisance. I've tried everything I can think of to permanently remove it with no success. Running a deep scan to find out if it is a virus didn't find anything. Am using XP Home edition. By the way, I get a similar Windows error message when I try to open GMAIL, and Firefox then opens my GMAIL account. Weird.
    Am hoping someone can tell me how to prevent these messages from appearing. Thanks in advance!

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]
    In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
    * Help > Restart with Add-ons Disabled
    * Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

  • TS3074 error 7 windows error 1114

    i followed all the support instructions but the error 7 windows error 1114 persists. I also have uninstalled and reinstalled iTunes and QuickTime but nothing changes. what should I do? I've installed microsoft.net 3.5 but windows tells me that microsfot.net 4.0 is already installed. Still, nothing changes at all.

    Hello Paoloneri93,
    The following article provides further steps that can help resolve other issues related to updating iTunes.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Allen

Maybe you are looking for