Windows 10 failing unable to connect to network

Ive just downloaded windows 10 on my hp pavillions laptop a 15-p264na and it seems like am unable to connect to the network every time i go on edge or firefox I get timed out when I check the drivers it says they are up to date , but how can it check if the drivers are suitable for windows 10 if even I cant get on via edge or firefox It seems via these forums that a lot of users have reverted to windows 8.1 then upgraded again ,My computer says its connected to my router but when i put it through a system check it says theres no connection as if the drivers not suitable for 10 , I am so dissappointed Ive wasted many hours trying to resolve this issue its like the laptop is useless unable to communicate with the outside world so it looks like I am going to have to restore windows 8.1 so any advice welcome

My WiFi and my Ethernet drivers worked on the first boot into Windows 10, then I was prompted to restart again. After that restart I was never able to get on the network again, and in Device Manager it says that both devices were unable to start and had no driver. My only fix was to revert back to Windows 7 then upgrade again. Its been fine since that.

Similar Messages

I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?

Could be that the servers are overloaded today.

Imac FaceTime unable to connect to network (safari connected and loading pages).

I have a brand new Imac, I have never been able to get facetime to work. It keeps getting hung up on the log in page, and eventually gives me an error message of unable to connect to network. Safari and other web based programs are working perfectly.
Any Ideas?

How can I get my Mac to join an open 3Com wireless
network? The network is recognised but Mac is unable
to connect...
The 3Com wireless router is connected to a broadband
router through a PC running XP.
Do you have two routers? That may be your issue. You should only be using one router, or configure one of the routers and turn of DHCP.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

Ipod "unable to connect to network"

i have an ipod4, and i'm only unable to connect to my home router, my friend's ipod connects to it fine, but mine is having problems, i have reset network settings, turned off sercuity on router and was still unable to connect, i have gone into router and opened mac address too but still wont let me connect, any suggestions

I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

Unable to connect to network ios 7

Tried Reset Network Settings with airpalne mode on and with it off. Reset router. Updated router to latest firmware. Still unable to connect to network.

Hi there casefromab,
it sounds like you have already tried a few things, but you may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

NOKIA N8 - Unable to connect - WLAN Network not fo...

also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!

Well, I seem to have issues with WLAN as well.
When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
P.S.: Tthere is another thread reporting similar problems. Here is the link.

Unable to Connect to Network error with right code

My Ipod Touch 4G just started having a problem a few days ago i left my house and reset my network settings because i wanted to see something not thinkign about when i got home and now any time i try to connect to it i ge the unable to connect to network error. My friends and family are all using there ipods on our network and they still work and ive tried everything ive updated reset network setting restored the ipod any suggestions on how to fix this?

- Did you power off and then back on the router?
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points

My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

My iPhone 5 says unable to connect to network. I have tried all the trouble shooting...resetting phone, router... No change. Problem occurs everywhere not just at home. Any suggestions?

AmishCake wrote:
Have you tried restoring your softwareyes
yes I have

Windows 7 machine unable to connect to WDS (Airport extreme + express)

Hi - I've just dusted down my old Airport Extreme (b/g) and Airport Express to extend the range of a Sagem Mini Livebox router (that we use because it gives internet telephone and tv feeds here in France).
The AExt has an ethernet connection to the livebox and is set up as the main WDS machine; the AExp is connected wirelessly to the AExt as a WDS relay station. It all works fine - I've set the airport wifi network up with a different name to the main livebox wifi network, and can access it using my Mac machines all over the house. But my wife has a Windows 7 machine that she uses for work ... and it fails to see the airport network (but is able to connect to the livebox wifi without any problem).
I don't know Windows 7 very well, and there seem to be very few options that you can configure. The wifi adaptor is a Dell 1390 (only b/g connections according to an online manual); but the old airport boxes only support b/g compatible connections, so that should work.
I've set up a wireless network on the W7 machine that matches the airport profile: WPA personal security ... but my understanding is that this will not change whether the W7 machine can see the airport network (but only affect how or whether it connects).
Not sure what else I can do? Any thoughts on how I can reconfigure my airport WDS network so that the W7 machine can see it (and connect to it)?
Thanks - andy

Are you trying to configure the Express to "join" the wireless network?
If yes, the message you are receiving is likely an indication that you do not have the correct security settings selected for the Express. Unless the security settings between the wireless router and Express match up exactly, the Express will display the error that "an error occurred, etc".
The easiest way to confirm if you have this problem is temporarily set the main wireless router to "no security" and try to connect the Express that way. If you can connect, then you know that it is a security issue.
Please tell us the exact setting for security that the wireless router there is using and we'll try to give you some more ideas.
The Express will connect. It's just a matter of finding the right settings.
Message was edited by: Bob Timmons

Windows 7 Wifi Unable to Connect (one device)

I have 4 devices (asus laptop - personal, dell laptop - work, android phone - personal, windows 8 phone - work) that all used to connect to wifi networks without an issue. Both laptops run windows 7. I'm now in temporary housing for a few months with its
own wifi setup. I do not have control of this router. Everything but the dell laptop was able to connect to this network. However, the dell will give me the generic "unable to connect error" when I try to connect and obviously the troubleshooter
doesn't provide any more information than that. Also, my ethernet cables are packed away in storage and I really don't want to buy another one for this temporary period. I've seen a lot of similar issues posted, but none of the solutions posed have worked
for my situation yet.
So the dell has NEVER been able to connect at this location - this is not an issue where it gets booted off the network/has poor connectivity.
I've tried the following which did not work:
1) Manually entering IPv4/Gateway/DNS etc.
2) Sharing the network (protected and unprotected) from my personal laptop
3) Standard restarts, disconnect/reconnects, etc. for all devices and the router
4) Entering all the encryption types (even though I know it is WPA2-Personal, AES)
5) Yes, wifi is enabled on that computer
6) Given that this is a work device, I cannot easily uninstall/reinstall drivers due to security blahblahblah
I would appreciate any advice with this situation.
Thanks!

Hi,
First, please check the following event log log before you try any suggestions.
Microsoft-Windows-WLAN-AutoConfig
It’s under applications and services log.
Based on the current situation, you may perform the following suggestions to check the issue:
1. Update the router firmware and reset the router.
The default settings of Windows 7 should work normally with the wireless router.
2. Set up a new network with WPA2 Encryption.
3. Verify with the WLAN service is started and set to automatic, if the WLAN service is stopped, I would suggest you to start the service and put it to automatic.
4. Follow the steps to start the WLAN service and disable the IP Helper service. (Click on Start, type in services.msc. Select WLAN Autoconfig from the list, Right click properties)
5. Connect to another wireless router for a test.
In addition, Please Use Network troubleshooter event logs to solve network problems
http://windows.microsoft.com/en-us/windows7/use-network-troubleshooter-event-logs-to-solve-network-problems
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Unable to connect to network iphone update server

I have an Iphone 4 that has been slow for a couple of days , today it started to open app different apps ( click on one and another opened) so i decided to restore and update it . Was running 4.3 . It never updated , has locked in recovery mode . when i try to restore i get a message that the iphone update server network unable to connect . I am running 10.5 itunes on a windows 7 . the iphone is visible in itunes , but when i check the diagnostic it said there is now iOS device connected . Is this a software issue or a hardware issue ? any help would be appreciated .

VarinderSandhu wrote:
Helios- Gunes EROL wrote:
Hi Nasir;
Please see below note which could be helpful for you:
ORA-12560: TNS:PROTOCOL ADAPTER ERROR [ID 989716.1]can you pls share me link or url as u suggested above ...
Regard
HeliosRegards,
Varinder SandhuIt's referring to a note in My Oracle Support (formerly known as MetaLink). You need to have a paid service contract with Oracle to access.

Unable to connect to network (dhcp) post upgrade

Dear All,
I'm a newbie Arch user, a couple of weeks ago I successfully installed Arch x64 + KDE4 on my desktop (dual boot with Windows 7) but after few days of the network failed during boot. I tried resolving the issue but couldn't. Since the installation was almost useless without a network, I formatted and reinstalled Arch.
The reinstall was successful but after a system upgrade with pacman -Syu, on rebooting the network failed again.
Since the network was configured dynamically during the net-install from a FTP server, I'm sure there is no hardware issue or problem with the network.
The network works flawlessly on Windows 7 but whenever I boot Arch, I get the following message:
::Stopping Network [DONE]
::Starting Network [FAIL]
(After it stays [BUSY] for a long period of time.)
After several tries of:
/etc/rc.d/network restart
Even if I get
::Starting Network [DONE]
On trying ping, I get:
ping www.google.com
ping: unknown host www.google.com
On trying to synchronizing the packages I get:
pacman -Syy
error: failed retrieving file 'core.db.tar.gz' from mirror.cse.iitk.ac.in : No address record
OR
error: failed retrieving file 'core.db.tar.gz' from mirror.cse.iitk.ac.in : Transient resolver failure
Even tried this:
dhcpcd eth0
but got the error:
dhcpcd[1805]: timed out
Lines from my /etc/rc.conf which is unedited after installation:
eth0="dhcp"
INTERFACES=(eth0)
gateway"default gw 192.168.0.1"
ROUTES=(!gateway)
I tried almost everything given in http://wiki.archlinux.org/index.php/Network
Also went through the forum posts and tried few suggestions but have no success.
Without a network my Arch installation is rendered useless.
I haven't even installed X leave alone KDE.
Please help me.
Thanks in Advance.
Last edited by kennethcyrus (2010-09-11 11:28:01)

Output of dhcpcd -d eth0
dhcpcd[1674]: version 5.2.7 starting
dhcpcd[1674]: eth0: executing '/usr/lib/dhcpcd/dhcpcd-run-hooks',reason PREINIT
dhcpcd[1674]: eth0: executing '/usr/lib/dhcpcd/dhcpcd-run-hooks',reason CARRIER
dhcpcd[1674]: eth0: broadcasting for a lease
dhcpcd[1674]: eth0: sending DISCOVER (xid 0x64f9e232),next in 4.99 seconds
dhcpcd[1674]: eth0: sending DISCOVER (xid 0x64f9e232),next in 8.97 seconds
dhcpcd[1674]: eth0: sending DISCOVER (xid 0x64f9e232),next in 15.56 seconds
dhcpcd[1674]: eth0: sending DISCOVER (xid 0x64f9e232),next in 31.50 seconds
dhcpcd[1674]: eth0: timed out

Unable to connect to network with Safari and Software Update

A user I support has encountered a problem with networking. He is unable to connect to the network with Safari and Software Update, but IS able to connect and surf with Foxfire and some other programs. Another unusual symptom is that he actually can connect to one web site (which is in his Bookmarks Bar) with Safari, but can't connect to anything else. He's also unable to navigate off of that one site he connects to. When he runs Network Diagnostics, he gets all green lights (no problems). He has fixed permissions, deleted Safari Cache and .plist, rebooted - not fixed yet. He's using 10.4.8 on a PowerPC G4. Any ideas appreciated (this is the wierdest I've seen in a while!).

Here's what he did. After reading your post, he created another location in his network preferences, entering EXACTLY the same info that was in his old location (he even used the old DNS addresses), except using a new location name. Then he chose the new location and "everything worked". It's one of life's great mysteries. Thanks for your help - it is appreciated.

Windows 7 laptops unable to connect to WiFi automatically

Hello All,
We are facing a wierd issue where the Windows 7 laptops are unable to connect to the corporate Wifi automatically.
We have pushed the profiles using Group Policy and there are about 15 profiles present on each laptop. The SSIDs are not broadcasted and PEAP is the authentciation method. While the Windows XP and some of the older Win 7 laptops connect fine the newer Dell 6410/20s doesnt. Upgrading the wireless card drivers hasnt made a difference.
I am posting this to know if anyone else on this forum has faced this issue and found a fix? Please suggest what could be the problem. Thank you in advance.
Best Regards

Hello Scott,
I am unable to set the policy to 2.4 only since there are a lot of APs sharing the controller and dont want to bump off all the clients that are able to client.
Today tried upgrading a cleints wireless NIC drivers and that didnt make much difference. And I am not seeing any debug output on the WLC for this client.
I think either some laptops are not probing actively or the WLC is ignoring the probe requests.
Could someone please guide how can i check if the laptops are sending probe requests for a particular SSID ??
I know it can be done using a wireless sniffer, but unfortunately i am not based onsite nor there is anyone onsite who can help.
Thanks,
Jeen

Windows 10 failing unable to connect to network

Similar Messages

Maybe you are looking for