Windows 10 fails on newer dualboot Windows 8.1/Linux, worked on older Windows 7.1/Linux
I did not have any trouble upgrading my windows 7 / linux hp laptop, just my windows 8.1 / linux hp laptop. I have 3 hp laptops, actually 4, one died. I am familiar with dual booting and grub. Thanks for recommending the paper anyway. Will windows 10 run on my dv6 7245us laptop? The upgrade always fails on this system as described in my original post.
Thanks
Has anyone sucessfully upgraded an HP Envy dv6 7200 series laptop to Windows 10 from WIndows 8.1? I have updated all of my HP drivers to the latest versions and Windows 8.1 is fully updated. I have tried installing from the Get Windows 10 icon, the media creation tool, and a Windows 10 x64 iso with no luck. I get through many phases of the upgrade, the system reboots, and then a large circle displays 0% briefly, the system reboots, and then a window displays the following information... We couldn't install Windows 10 We've set your PC back to the way it was before you started installing Windows 10 0X80073B92 - 0x20009 The installation failed in the SAFE_OS phase with an error during PREPARE_ROLLBACK operation The system is dual boot Windows 8.1/Linux. Note that my years older HP laptop upgraded just fine and was also a dualWindows 7/Linux boot system. Please help! Thank you.
Similar Messages
-
itunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adamitunes and windows 8 compatability
Hi
just bought a new toshiba laptop installed itunes it worked at first now wont play music or movies.
ran troubleshooter said its a compatabilty problem suggested turning off itunes compatability or selecting windows service pack 3 tried both no help
please assist
adam -
just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon
[Quote]
Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts. I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
[/Quote]
Well I found nothing wrong in your post. So why even make a statement like the quote I included?
Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
No bashing, no adversarial post just a little common sense is all I use.
And again your post was great.
Good Luck -
Log In Failed - Enter New Password
Hi Guys,
I've been using TB for a while now, along with the several email accounts, including: Hotmail, Outlook, Mail.com & to a lesser degree Supanet !?
Every now and then, when trying to Send, I get the message "Log In Failed - Enter New Password". I usually just click the red cross a couple of times, & it goes away. I never need to input a new password,,,,
but, today its one of the Mail.com accounts. I've been on their own site and sent the message. There isn't a problem with Mail.com, or my settings.
As usual, it worked fine until today.
I tried inputting the current p.w and creating a new one, but to no avail.
How do I fix this please ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I'm glad to see that the 'colouration' problem was fixed.Thanks for your help so far.
I ''think'' this particular problem is fixed, but as it happens quite often, I have included the details that you asked for, in the hope that you can help me to either clean it up, or see any anomalies.
Mail and News Accounts
ID Incoming server Outgoing servers
Name Connection security Authentication method Name Connection security Authentication method Default?
account2 (none) Local Folders plain passwordCleartext
account3 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account4 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account5 (pop3) pop.mail.com:110 alwaysSTARTTLS passwordCleartext smtp.mail.com:587 alwaysSTARTTLS passwordCleartext true
account6 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account7 (pop3) pop3.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account8 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account9 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account10 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account11 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account12 (imap) imap.googlemail.com:993 SSL passwordCleartext smtp.googlemail.com:465 SSL passwordCleartext true
smtp.googlemail.com:465 SSL passwordCleartext false
account13 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account14 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account15 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account16 (pop3) pop.supanet.com:110 plain passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account17 (pop3) pop.mail.com:110 plain passwordCleartext smtp.mail.com:25 alwaysSTARTTLS passwordCleartext true
account18 (pop3) pop.mail.com:995 SSL passwordCleartext smtp.mail.com:465 SSL passwordCleartext true
account19 (pop3) pop.mail.com:995 SSL passwordCleartext smtp.mail.com:465 SSL passwordCleartext true
account20 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account21 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account22 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account23 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account24 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account25 (rss) Feeds plain passwordCleartext
account26 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account27 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account28 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
account29 (pop3) pop3.live.com:995 SSL passwordCleartext smtp.live.com:587 alwaysSTARTTLS passwordCleartext true
Extensions
Name Version Enabled ID
Folderpane Tools 0.6.1 true {b243fe83-b8a7-47de-855d-21d865243d5d}
British English Dictionary 1.19.1 false [email protected]
Important Modified Preferences
Name Value
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.disk.smart_size_cached_value 358400
browser.display.foreground_color #3333FF
browser.zoom.full true
extensions.lastAppVersion 24.6.0
font.name.monospace.el Consolas
font.name.monospace.tr Consolas
font.name.monospace.x-baltic Consolas
font.name.monospace.x-central-euro Consolas
font.name.monospace.x-cyrillic Consolas
font.name.monospace.x-unicode Consolas
font.name.monospace.x-western Consolas
font.name.sans-serif.el Calibri
font.name.sans-serif.tr Calibri
font.name.sans-serif.x-baltic Calibri
font.name.sans-serif.x-central-euro Calibri
font.name.sans-serif.x-cyrillic Calibri
font.name.sans-serif.x-unicode Calibri
font.name.sans-serif.x-western Times New Roman
font.name.serif.el Cambria
font.name.serif.tr Cambria
font.name.serif.x-baltic Cambria
font.name.serif.x-central-euro Cambria
font.name.serif.x-cyrillic Cambria
font.name.serif.x-unicode Cambria
font.name.serif.x-western Cambria
font.size.fixed.el 14
font.size.fixed.tr 14
font.size.fixed.x-baltic 14
font.size.fixed.x-central-euro 14
font.size.fixed.x-cyrillic 14
font.size.fixed.x-unicode 14
font.size.fixed.x-western 14
font.size.variable.el 17
font.size.variable.tr 17
font.size.variable.x-baltic 17
font.size.variable.x-central-euro 17
font.size.variable.x-cyrillic 17
font.size.variable.x-unicode 17
font.size.variable.x-western 17
mail.openMessageBehavior.version 1
mail.winsearch.firstRunDone true
mailnews.database.global.datastore.id 8847ee7d-245d-42d0-8681-37221dcd524
network.cookie.prefsMigrated true
places.database.lastMaintenance 1401969491
places.history.expiration.transient_current_max_pages 93904
places.history.expiration.transient_optimal_database_size 150247342
plugin.importedState true
Graphics
Adapter Description NVIDIA GeForce GT 440
Vendor ID 0x10de
Device ID 0x0de0
Adapter RAM 1024
Adapter Drivers nvd3dum nvwgf2um,nvwgf2um
Driver Version 9.18.13.2049
Driver Date 6-21-2013
Direct2D Enabled false
DirectWrite Enabled false (6.2.9200.16571)
ClearType Parameters Gamma: 2200 Pixel Structure: BGR ClearType Level: 50 Enhanced Contrast: 100
WebGL Renderer false
GPU Accelerated Windows 0
AzureCanvasBackend skia
AzureFallbackCanvasBackend cairo
AzureContentBackend None
JavaScript
Incremental GC 1
Accessibility
Activated 0
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.2 4.10.2
NSS 3.15.4 Basic ECC 3.15.4 Basic ECC
NSS Util 3.15.4 3.15.4
NSS SSL 3.15.4 Basic ECC 3.15.4 Basic ECC
NSS S/MIME 3.15.4 Basic ECC 3.15.4 Basic ECC -
Autocomplete in search box dropdown list fails in new version
autocomplete in search box dropdown list fails in new version
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Edit > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available" -
Autocomplete in search box dropdown list fails in new version 5
autocomplete in the search box dropdown fails in new version 5
I did as you suggested, although after I clicked "manage Search Engines" there was no Show search suggestions to be clicked on that Window. If I then clicked on Search there was an option to select "Suggest searches as type" and "Automatically search when you select from the drop down list".
Both of these options were already selected so it's still not working.
This first happened in Firefox 4. it's still has not been resolved. -
I am working through the eBook "Building Cloud Apps with Microsoft Azure" and when I run New-AzureWebsiteEnv.ps1 I get the following error
Error: Cannot get Azure subscription ID and thumbprint. Failed in New-FirewallRuleForWebsite in New-AzureSql.ps1
I have already tried adding -ExtendedDetails to Get-AzureSubscription in New-AzureSql.ps1 and New-AzureWebsiteEnv.ps1.
I am using Azure PowerShell 0.8.16 and Windows 7 Service Pack 1.Hi,
Not too sure if you have tried this:
In the code you will have a line:
$s = Get-AzureSubscription –Current
Change that line to:
$s = Get-AzureSubscription -Current –ExtendedDetails
The difference between the two lines is that the –ExtendedDetails will return the Thumbprint required by the code
Reference:=
http://blogs.msdn.com/b/devschool/archive/2015/04/10/error-in-fixit-demo-cannot-get-azure-subscription-id-and-thumbprint-urghh.aspx
Regards,
Mekh. -
Anyone know how I can update/unbrick this iPod? It's useless. It's stuck on the screen that says connect to iTunes. iTunes doesn't know it's there. My computer doesn't know it's there. It's not the USB port.
Please don't direct me here - http://support.apple.com/kb/HT1808 - already tried, no results.
Last time it was a missing driver for iTunes but iTunes says nothing new is needed. Help appreciated.Let me try this again. My computer said my iPod needed an update. I clicked ok. iTunes said it was doing the update. I browsed the internet. I came back to it after it was done, and it said update failed, no new drivers installed. Now my iPod touch is a brick. I cannot use it for anything. You know that screen that shows the usb cable, a white arrow, and iTunes? It's stuck there. No amount of pushing the sleep/wake button and home button will convince it to go to any other screen. When I go to 'My Computer', it does not recognize that there is anything there. It is not the USB port. Everything was fine until the update tried and failed.
I am not installing iTunes (piece of crap software that it is) on the other computer in my apartment.
I have exhausted the articles that sort of go with the problems I am having. They all assume a non brick iPod. Mine is a brick and therefore those articles, including the one you linked, are not relevant.
Not meaning to be rude, but I came into this not caring much for Apple's business model. I've had my iPod for .. a week? Maybe two, and nothing I've seen has convinced me to feel otherwise. Apple's products are supposed to just work. I am not finding that to be the case. Anyone with anything helpful please? -
Does "Filesystem verify or repair failed" mean new HD?
Hi all
Just need to know, for sure, if this means my MacAir is in need of a new Hard Drive?
Safe Mode (Boot) takes me to my log in and then won't log in.
Disk Utility stops at:
Verifying and Repair volume "disk0s4"
Error: Filesystem verify or repair failed.
New HD ?
MikeThanks for the bit of help. It gave me encouragement to keep dogging the problem.
But still have the problem with a bit of a twist!
I've was able to do the Apple Hardware Test First Aid the indepth xtended one. The result was all's good.
Now then with the Safe Startup...
It gets to the login screen (no red text about welcome to safe start, or some such).
On the log in screen I have 3 choices:
Myself
My wife
Guest
I can get to the internet with Guest login
I can log into the MacAir as My wife.
As for loging in as myself.. Screen goes white then reverts back to the log in screen with the 3 choices..
Logged in as my wife, I did the recent "big" OS update. (Takes quite awhile)
But still. I can't log in as me!
So as I can log in as my wife, is there some way some fix I can do.
Should I (if I can) reload Lion from the TC?
Help me please!
Mike -
HT4623 I Installed the new ios6 and my siri stoped working how do i reinstall it?
I installed the new ios6 and my siri stopped working how do I reinstall it?
It says " application failed because MSVCR80.dll is missing from computer and then when I click okay it says I tunes wan't installed correctly Please reinstall
Many thanks, that's perfect. Try the following user tip with those ones:
Troubleshooting issues with iTunes for Windows updates -
I know my passcode is correct but when I try to reset my iPad mini it keeps asking for a passcode! have tried restoring, connecting to iTunes and looked for the 'set up as new iPad' notification, but nothing is working? can anyone help please?
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I have a macbook pro4.1 and the sound chip in it failed. My speakers and microphone no longer work. Does anyone know of an external speaker and microphone set that plugs into the USB port so I can continue to use both of these functions and not have to pay to have the entire main board replaced. Preferably something under $100.
I don't think you're likely to find a set of external speakers that come with a microphone and plug directly into a USB port. There are USB audio cards that look like tiny flash drives but have microphone and headphone ports in them, to which you can connect a typical two-plug Windows PC headset with a microphone, or else you can connect external speakers and a stand-alone microphone. Those adapters typically cost under $10. I don't know anything about the quality of sound that can be expected from them.
I have a Griffin iMic, which is much the same idea but larger, a bit more expensive (retail~$40), and perhaps delivers somewhat better sound quality (I hope so, but I don't know because I've never had occasion to try one of the little ones).
http://www.google.com/products/catalog?oe=UTF-8&hl=en&client=safari&q=usb+sound+ card&um=1&ie=UTF-8&tbm=shop&cid=9618463009759678039&sa=X&ei=tgQoT5zYOMfZ0QHkiICw Ag&ved=0CHcQ8gIwAQ
http://compare.ebay.com/like/320779457703?var=lv<yp=AllFixedPriceItemTypes&var =sbar -
my creative cloud downloaded and so did PS but now its saying there is an error...update failed and im retrying it but its not working what do i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Storeand turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
New iMac and iDVD just wont work!
All,
Just got a new iMac and iDVD just wont work, from creating a new project, or opening an old one, or trying to share from iMovie (HD)
If I try to do anything nothing seems to happen and when I close the program a window does appear and from there it just freezes.
Have deleted and reinstalled iDVD, repaired permissions, all up to date in my on software updates...any ideas?
Thanks
Zara*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
Macintosh HD/Library/Application Support/iDVD/Themes/ zzzzzzzzzz
or
Macintosh HD/Users/Your log-in//Library/Application Support/iDVD/Installed Themes/ zzzzzzzzzz
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
iDVD updated ?
Apple Codec updated ?
Start a New Clean project - or delete project assets
No of Colors - must be set to millions
EdinSF writes that, The 10.6.3 update with an Open GL fix seems to have taken care of the problem.
Yours Bengt W -
I have a new table, the PK is a varchar2(5) column, when I allow the default query in the report to do its work, I get all the expected data. when I click on the edit icon (pencil), I get an error screen indicating ORA-01403: no data found. I'm hosed! This was generated by the app! no changes were made to anything in the app, except to turn off tabs at create time. I even left the default name.
My ARF is hitting the right table with the PK column, but finds nothing. I have the "success" message showing me the PK value. What could be going on here, and how can it be addressed? Today is the 1st time I have seen this matter.
I'm running 4.22 as the workspace admin, I have other apps that work fine (to expectation), my browser is FF22, though I plan a downgrade to 18. Our DB is 11.1.0.7.Jorge, thanks for your attention to my problem, I appreciate any insights, although there is a little clarification I can offer. Also, if you can, please remind me the tags to use in my text that would properly set off the code snippets or prior message content?
[you wrote]
You said you have a "success" message showing you the PK value. Can you elaborate on this?
The form page, under the ARF, allows for the display of a "success" message and a "failure" message. I have seen my "success" message appear, but it didn't show my key field as a brought-back value (which I told it to include), and I think now this is not relevant any longer. I found that there was a link on the report attributes page between #ROWID# and a P2_ROWID that was incorrect (probably from an earlier stage of dev in the app), and I changed this to my key field, and this altered the outcome of the ARF action. This leads to ....
[you wrote]
Can you see the correct PK value in the URL? Does the item parameter match what you expect (correct page item and value)? Perhaps share that full URL here?
I have expected values in my URL. The URL does show my key value (tail end of URL underlined here):
../apex/f?p=120:2:7519563874482::NO::P2_VCODE:RB15
[you wrote]
Debug the page and see which process, item or step is actually failing. You could be running some other process on the form page and that could be what actually fails. Treat it as if the ARF works correctly and see what else could be happening.
I can add the detail that my 1st message was based on testing with a table where I set the PK as data type VARCHAR2, but in more testing on the actual app (whose URL piece is above) I am using a PK which is CHAR.
The result of the debug effort is that APEX has built its own query for pulling back the row in the ARF, and it is joining on my PK field to an APEX item P_ROWID which I don't think I created. Nor does it appear to offer me any avenue for correcting it. debug snippet: where "VCODE" = :p_rowid; end;
Maybe you are looking for
-
I have tried continually today to get my phone to be recognised by ovi suite. It see's the phone model when adding a new device, but when i click on the phone, it comes up with the phone is not in ovi suite mode???? What the heck, its the only mode a
-
Getting a mapping error to propogate from loop block within I.P.
OK I kinda asked the question as a sub topic under a different heading SXMB_MONI_BPE -> Message Payload not visible in container but didnt really get an answer I'm happy with, so here goes as a main topic! The short description: I have a mapping step
-
My boss just gave me a project. He wants to do a CBT in keynote and export it in a flash format. I was really good at PowerPoint, so I should be able to pick up Key Note without too much difficulty. When I export to .swf will all the animations, move
-
Just downloaded Yosemite, and then did the update for iTunes. I then noticed that it was still telling me that it needed to be updated, so did it again, thinking it had not worked. Still said it was needing an update. When I opened iTunes it has been
-
I need to create a mobile version for a site that is based on scroll effects and a slideshow background. Is it possible to copy the format from the desktop version without re-designing all the elements?