Windows 10 Fails To Install
Trying to upgrade to Windows 10 but having serious issues. The upgrade starts in Windows 7 Pro, asks the various questions, reboots to the install environment, finishes copying files, reboots and it goes to "Preparing Automatic Repair." Automatic repair fails to repair anything, and a reboot shows an error "A required device isn't connected or can't be accessed. Error Code: 0xc000000f." No matter what I try it fails at the exact same place. I'm to the point of having my laptop in pieces (I can reassemble) with only the bare minimum connected to get it to start, figuring it might be a driver issue. I've tried deactivating the "Data Execution Prevention," activated TPM, activated TXT, etc. and every combination I could think of. I have installed Windows 10 on the laptop with a clean install, however I cannot activate a clean Windows 10 install without first upgrading. I've posted a thread on the Microsoft community forums, however I have yet to recieve a resolution. If you would to see more info on what I've been told to try you can read it here http://answers.microsoft.com/en-us/windows/forum/windows_10-windows_install/windows-10-fails-to-install/106312ee-9876-44fe-9a40-1037a6a454d3?auth=1 I am totally lost and any new ideas would be appreciated. TYIA
Hi,
This particular question pertain to Windows 10 Preview. Please post your question on this link
http://answers.microsoft.com/en-us/windows/forum/windows_tp?auth=1.
So that experts will be able to help you better.
Regards,
Bharath
Similar Messages
-
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
Windows failed to install the following update with error 0x80070005
Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-usOkay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
I got the IPOD installed on my laptop but want to install on my Sony computer running Windows. After software installed and reboot, I plug the IPOD into the 2.0 USB port...but the computer doesn't recognize the IPOD to install the necessary driver after the reboot. It is looking on the CD. Wonder if I can find the right spot to direct the computer to look for the drivers. is there any problem with the software being installed on two personal computers? It already works on older Dell Latitude laptop??
I had trouble installing my iPod software the very first night I got it. I believe it didn't install because I had my firewall & antivirus software enabled. This is just a suggestion, but maybe if you have these & have these enabled, you should disable them until you install the iPod software.
-
Airport Utility for Windows fails during install
I downloaded the latest driver for the airport utility for Windows 7. Ran the exec and during the install had a failure on some file that didn't get installed.
Have all firewalls down. Utility comes up but doesn't find my airport extreme.Thanks. Tried the hard wire approach and the utility didn't find it. Did the config other and it was found. So the unit is there but the utility can find it which is what I need in order to connect the shared drive to my windows 7 system.
The airport base station agent is running and configured but I never get a prompt to enter the disk password.
Nice clue about using the IP to connect.
I did this via WIFI. Used my iMac to get the IP address.
The time machine is in bridge mode and connecting through another router to the internet. -
Adobe Elements 10 Windows - fails on install of trial
After encountering problem with 9.0 i downloaded a number of times the trial of version 10 , tried installing a number of time with a error message that a file was missing
See if this Adobe troubleshooting document helps:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html
Ken -
KB2977326 - Security Update for SQL Server Service Pack 1 repeatedly fails to install
This update fails to install every day when I shut down my computer. Here is the WindowsUpdate.Log:
2014-12-02 15:50:11:469
420 44c
AU #########
2014-12-02 15:50:11:469
420 44c
AU # Initiating install at shutdown
2014-12-02 15:50:11:469
420 44c
AU # Approved updates = 1
2014-12-02 15:50:11:516
420 44c
AU <<## SUBMITTED ## AU: Install updates / installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:50:11:516
420 44c
Shutdwn InstallAtShutdown starts.
2014-12-02 15:50:11:516
420 1528
Agent *************
2014-12-02 15:50:11:516
420 1528
Agent ** START ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:50:11:516
420 1528
Agent *********
2014-12-02 15:50:11:516
420 1528
Agent * Updates to install = 1
2014-12-02 15:50:11:531
420 1528
Agent * Title = Security Update for SQL Server 2012 Service Pack 1 (KB2977326)
2014-12-02 15:50:11:531
420 1528
Agent * UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}.200
2014-12-02 15:50:11:531
420 1528
Agent * Bundles 1 updates:
2014-12-02 15:50:11:531
420 1528
Agent * {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200
2014-12-02 15:50:11:547
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:12:327
420 d4c
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:50:20:548
420 44c
AU WARNING: Pending directive, 'Install Approval', is not applicable
2014-12-02 15:50:24:417
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:50:24:432
420 1528
DnldMgr Preparing update for install, updateId = {C076E757-1A4F-44DB-823B-CFFC07CD7D38}.200.
2014-12-02 15:50:25:119
2052 608
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0600) ===========
2014-12-02 15:50:25:119
2052 608
Misc = Process: C:\Windows\system32\wuauclt.exe
2014-12-02 15:50:25:119
2052 608
Misc = Module: C:\Windows\system32\wuaueng.dll
2014-12-02 15:50:25:119
2052 608
Handler :::::::::::::
2014-12-02 15:50:25:119
2052 608
Handler :: START :: Handler: Command Line Install
2014-12-02 15:50:25:119
2052 608
Handler :::::::::
2014-12-02 15:50:25:119
2052 608
Handler : Updates to install = 1
2014-12-02 15:50:25:119
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:52:23:991
420 44c
AU AU setting next sqm report timeout to 2014-12-03 21:52:23
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Command line install completed. Return code = 0x84b20001, Result = Failed, Reboot required = false
2014-12-02 15:54:39:587
2052 608
Handler : WARNING: Exit code = 0x8024200B
2014-12-02 15:54:39:587
420 16d8
AU >>## RESUMED ## AU: Installing update [UpdateId = {E0D65CC4-3B13-4352-BD89-A28C5F4C5017}]
2014-12-02 15:54:39:587
2052 608
Handler :::::::::
2014-12-02 15:54:39:587
2052 608
Handler :: END :: Handler: Command Line Install
2014-12-02 15:54:39:587
2052 608
Handler :::::::::::::
2014-12-02 15:54:39:587
420 16d8
AU # WARNING: Install failed, error = 0x80070643 / 0x84B20001
2014-12-02 15:54:39:587
420 16d8
Shutdwn InstallAtShutdown got install progress.
2014-12-02 15:54:39:711
420 1528
Report REPORT EVENT: {DFA9CDC8-334A-4E57-9588-77B8E980833D}
2014-12-02 15:54:39:587-0600 1
198 101
{E0D65CC4-3B13-4352-BD89-A28C5F4C5017}
200 80070643
AutomaticUpdates Failure
Content Install Installation Failure: Windows failed to install the following update with error 0x80070643: Security Update for SQL Server 2012 Service Pack 1 (KB2977326).
2014-12-02 15:54:39:727
420 1528
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-12-02 15:54:39:727
420 1528
Report WER Report sent: 7.6.7600.320 0x80070643 E0D65CC4-3B13-4352-BD89-A28C5F4C5017 Install 101 Unmanaged
2014-12-02 15:54:39:727
420 1528
Report CWERReporter finishing event handling. (00000000)
2014-12-02 15:54:39:805
420 1528
Agent *********
2014-12-02 15:54:39:805
420 16d8
AU Install call completed.
2014-12-02 15:54:39:805
420 1528
Agent ** END ** Agent: Installing updates [CallerId = AutomaticUpdates]
2014-12-02 15:54:39:805
420 16d8
AU # WARNING: Install call completed, reboot required = No, error = 0x00000000
2014-12-02 15:54:39:805
420 1528
Agent *************
2014-12-02 15:54:39:805
420 16d8
AU #########
2014-12-02 15:54:39:805
420 16d8
AU ## END ## AU: Installing updates [CallId = {685C12BB-7AA9-4A31-9620-8F306EEE31C3}]
2014-12-02 15:54:39:805
420 16d8
AU #############
jim...Hello,
Please examine the Summary.txt log file. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
If you find the sentence “A failure was detected for a previous installation” on the Summary.txt log file, please repair SQL Server using the following article:
http://msdn.microsoft.com/en-us/library/Cc646006(v=sql.110).aspx
If you find other errors, please share the content of the Summary.txt log file with us.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Failed to install the new preview build, please try again later. 0xC1900107
I'm trying to upgrade Windows 10 TP for Enterprise to the new build 8460, but I keep getting the error message
Failed to install the new preview build, please try again later. 0xC1900107
I don't find any reference to that error code. I've seen similar reports in the forum, but with different error codes and with the message "Failed to upgrade" rather than "Failed to install". I haven't played with the reg keys on this
system.
The event viewer shows the following event:
Installation Failure: Windows failed to install the following update with error 0xC1900107: fbl_release 9860 Enterprise.
The upgrade to a non-Enterprise device started at the same time went through without problems.
AlbertoHi Russell,
What’s the situation now?
There would be a cause that the upgrade is running background, so a retry would fail in this situation.
You can check the action log in C:\$Windows.~BT\source\panther\setupact.log
Check the time line to see if it is running for upgrade.
Alex Zhao
TechNet Community Support -
MS Office 2010 Updates failing to install
Hi,
We have 9 MS Office 2010 updates released in April 14th 2015, that are failing to install on a Windows 7 machine. WindowsUpdate.log file shows and error message as "Windows failed to install the following update with error 0x80070656" , for all
the 9 updates.
Tried to restart the system and install updates again, which failed.
Please suggest how to proceed on this.
Regards, Lorin Davisin addition to/instead of restarting the client, try this on the client:
1. stop the windows update and background intelligent transfer services
2. delete everything in c:\windows\softwaredistribution
3. start the windows update and background intelligent transfer services
4. go back into windows updates in the control panel and check for updates again. or run "wuauclt /detectnow" from a command prompt. -
Failed to install Creative Cloud desktop error code 1 Windows 8.1
I just recently tried to begin a trial of creative cloud in order to get access to photoshop. I really need photoshop for my school because of how powerful it is and the tools is offers. A couple weeks ago I tried to download and install creative cloud for windows 8 64-bit, and the download begins, but once it reaches around 50%, it raises an error message saying "We've encountered the following issues: Creative Cloud desktop failed to install (error code 1)". I was having problems with the internet at the time so I just naturally assumed it was the cause. So I went ahead and gave it a couple of days before I tried again. When I tried again I received the same error message at the same time. I continued to look around for a solution and trying it everyday but I have had absolutely no luck with it, and honestly am getting quite frustrated with it. I have looked everywhere for a solution, I tried the adobe clenup tool, I have checked to make sure I don't have any previous versions of adobe products on my computer, and even tried installing it as an admin in safe mode, and still nothing. I have no idea what to do next, but I know that I have to get ahold of photoshop, one way or another, and it must have the professional tools included in the creative cloud edition. Please tell me there is a simple solution and I have been blind this entire time. If there is no solution, can someone direct me to another software similar to photoshop that has access to the plug-in dDo? (I am in game development and have heard how powerful dDo is and have been dying to use it. I have also been anxious to get photoshop, but it doesn't appear to be possible without the creative cloud desktop app).
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
Kb2920189 fails to install on Windows 2012 R2 Essentials
Hello,
I have a 2012 R2 Essentials server that fails to install the UEFI KB2920189 update. All other updates installed fine. It's running two disks, one has 8.1 the other has 2012 R2 Esssentials in dual boot mode. No VM. I have heard reports
of successful installs of this kb2920189 update that basically bricks the OS on reboot. I would like to avoid this. The error code during the failed installation is 800F0922.
ThanksHi,
Based on your description, I understand that you failed to install KB2920189 with error 800F0922.
Please refer to following operations and check if can help you to solve this issue.
Refer to the KB (KB947821), and use the inbox Deployment Image Servicing and Management (DISM) tool. Then install
this update again.
Please
reset Windows Update components and monitor the result.
Please perform a
clean boot and check if you can install this update successfully.
If this issue still persists, please navigate to: %windir%\Windowsupdate.log and check the log file if can
find some more clues.
For more details, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu -
Fail to install Distibution Point on Windows Server 2012
I have been trying to install a distribution point via sccm 2012 on a windows 2012 server. I keep getting errors about the drive not found (distribution manager failed to verify drive specified by user on distribution point) and it won't install. It worked
on all the other servers I tried, but this one keeps giving trouble.
Does anyone have any idea as to the cause?
I put an extract of the log file here:
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:18 5848 (0x16D8)
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:19 5848 (0x16D8)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:20 5848 (0x16D8)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
ConfigureDP SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:44 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:49 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:54 1724 (0x06BC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
No need to initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:16 3724 (0x0E8C)
Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:21 3724 (0x0E8C)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Sleep 1231 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 5848 (0x16D8)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x2274 (8820) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x9B8 (2488) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00003" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00004" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Thread Handle = 00000000000031DC SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with thread handle 00000000000031DC and thread ID 7936 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Thread Handle = 00000000000016A8 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with thread handle 00000000000016A8 and thread ID 3404 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:36.247 2013 ISTR0="Configuration Manager Client Package" ISTR1="SES00003"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820
(0x2274)
Failed to process package SES00003 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:36.282 2013 ISTR0="Configuration Manager Client Upgrade Package"
ISTR1="SES00004" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:36 2488 (0x09B8)
Failed to process package SES00004 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)I uninstalled the WDS according to the information on this site: http://myitforum.com/myitforumwp/2011/11/08/configmgr-2012-no-need-to-manually-install-wds/
But it still keeps giving me errors about the disk not being valid, it does that wether I choose a disk or leave the default values.
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
ConfigureDP SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
Upgrading DP with ID 16777238. Thread 0x1bdc. Used 1 threads out of 5. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
Processing 16777238.INS SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
DPID 16777238 - NAL Path ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ , ServerName = HUSOWINFP01.SESVANDERHAVE.NET, DPDrive = D:, IsMulticast = 0, PXE = 1, RemoveWDS = 0 SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:50 7132 (0x1BDC)
Created policy provider trigger for ID 16777238 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7692 (0x1E0C)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\******** SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:54 7132 (0x1BDC)
Failed to find a valid drive on the distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7492 (0x1D44)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Failed to install DP files on the remote DP. Error code = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Drive D: is not valid. Error = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
STATMSG: ID=2360 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=7132 GMTDATE=ma jan 06 07:49:56.907 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="HUSOWINFP01.SESVANDERHAVE.NET" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:56 7132 (0x1BDC)
Will try again after 20 mins ... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:00 7492 (0x1D44)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:05 7492 (0x1D44)
Initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to get object class SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
ExecStaticMethod failed (80041002) SMS_DistributionPoint, RegisterDPHealthMonTask SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to register DP health monitoring task on HUSOWINFP01.sesvanderhave.net. error = 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Sleep 60 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0x12CC (4812) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0xDD8 (3544) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:32.429 2014 ISTR0="SES00003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:32.475 2014 ISTR0="SES00004" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4812 (0x12CC)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 3544 (0x0DD8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Thread Handle = 0000000000002BE0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with thread handle 0000000000002BE0 and thread ID 8896 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Thread Handle = 0000000000002CF0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with thread handle 0000000000002CF0 and thread ID 4628 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:35.736 2014 ISTR0="Configuration Manager Client Upgrade Package" ISTR1="SES00004" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Failed to process package SES00004 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:35.829 2014 ISTR0="Configuration Manager Client Package" ISTR1="SES00003" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Failed to process package SES00003 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:36 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 1828 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:41 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Sleep 1823 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94) -
After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.
Click here and follow the instructions.
(98815) -
Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server
Hi,
I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
Thanks,
BjornHi,
I did the test and could install the Windows Search Service without problem.
Which role did you installed on the terminal server?
Did you try to install it on another windows server?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed
Hi,
The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
Below is the details from IE11_main.log file
00:00.000:
====================================================================
00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
00:00.016: INFO: Setup installer for Internet Explorer: 11.0.9600.16428
00:00.016: INFO: Previous version of Internet Explorer: 10.0.9200.16866
00:00.016: INFO: Checking if iexplore.exe's current version is between 11.0.9600.0...
00:00.016: INFO: ...and 11.1.0.0...
00:00.016: INFO: Maximum version on which to run IEAK branding is: 11.1.0.0...
00:00.016: INFO: iexplore.exe version check success. Install can proceed.
00:00.016: INFO: Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
00:00.016: INFO: Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
00:00.016: INFO: Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
00:00.016: INFO: Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
00:00.702: INFO: Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
00:00.702: INFO: Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
00:00.702: INFO: Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
00:00.702: INFO: Extracted Hyphenation dictionary for en to
C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
00:00.718: INFO: Trying to extract ID: 7128 (1033) as "IE11-support.cab"
00:01.607: INFO: PauseOrResumeAUThread: Successfully paused Automatic Updates.
00:02.714: INFO: Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
and extracted for use.
00:02.730: INFO: Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
00:02.870: INFO: Graphics Device Information: Intel(R) HD Graphics Family
00:02.870: INFO: Hardware support check succeeded. Installation will continue.
00:02.870: INFO: Windows 7 operating system detected.
00:02.886: INFO: Service pack major: 1
00:02.886: INFO: Service pack minor: 0
00:02.886: INFO: Service pack name: Service Pack 1
00:02.886: INFO: Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
6.2.9200.16570 (True)
00:02.886: INFO: Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
6.2.9200.16492 >= 6.2.9200.16426 (True)
00:02.886: INFO: Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
6.1.7601.17727 (True)
00:02.902: INFO: Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
6.1.7601.18229 >= 6.1.7601.17617 (True)
00:02.902: INFO: Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
6.1.7601.17888 (True)
00:02.902: INFO: Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
00:02.902: INFO: Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
6.1.7601.18010 (True)
00:02.902: INFO: Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
6.1.7601.18254 (True)
00:02.917: INFO: Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
6.1.7601.18247 (True)
00:07.597: INFO: Waiting for 0 prerequisite downloads.
01:37.423: INFO: The neutral pack was successfully downloaded from the internet. Installation will continue using
the downloaded package.
01:37.423: INFO: Waiting for 0 language pack downloads.
01:37.423: INFO: Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
01:37.438: INFO: No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
01:38.000: INFO: No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
01:38.000: INFO: Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
neutral.Downloaded.cab
01:38.000: INFO: Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
/packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
02:20.619: INFO: Process exit code 0x80004005 (-2147467259) [Unspecified error ]
02:20.713: ERROR: Neutral package installation failed (exit code = 0x80004005 (2147500037)).
02:20.729: INFO: No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
02:20.744: INFO: No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
02:20.775: INFO: No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
02:20.869: INFO: Waiting for Active Setup to complete.
02:20.963: INFO: PauseOrResumeAUThread: Successfully resumed Automatic Updates.
02:32.694: INFO: Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
02:32.741: INFO: Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
02:32.756: INFO: SQM Upload returned 403
02:36.453: INFO: Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
02:36.531: INFO: Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
02:36.531: INFO: Released Internet Explorer Installer Mutex
Taweesak ArchawamaitreekoolDISM.log would make this clearer. And using ProcMon I suspect would really make it snap out at you. <eg>
C.f. (credit for a recent discovery)
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9
Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
Good luck
Robert Aldwinckle
Thank you very much.
I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
For DISM.Log, here are the details from the started time of the installtion process
2014-05-29 16:53:55, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:53:55, Info DISM DISM.EXE:
2014-05-29 16:53:55, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:53:55, Info DISM DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
/quiet /norestart
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2014-05-29 16:53:55, Info DISM DISM Provider Store: PID=9144 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
- CDISMManager::LoadImageSession
2014-05-29 16:53:58, Info DISM DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Warning DISM DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
- CDISMManager::CreateImageSession
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:58, Info DISM DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:58, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:58, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info CSI 00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2014-05-29 16:53:59, Info CSI 00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2014-05-29 16:53:59, Info DISM DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2014-05-29 16:53:59, Info DISM DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: OSServices
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: MsiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: IntlManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DriverManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: SmiManager
2014-05-29 16:53:59, Info DISM DISM.EXE: Attempting to add the commands from provider: Edition Manager
2014-05-29 16:53:59, Info DISM DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
2014-05-29 16:53:59, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2014-05-29 16:53:59, Info DISM DISM Provider Store: PID=8324 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
- CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
2014-05-29 16:53:59, Info DISM DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
2014-05-29 16:54:00, Info DISM PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2014-05-29 16:54:00, Info DISM PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider. Continuing by assuming that it
is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has previously been initialized. Returning the existing instance. -
CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2014-05-29 16:54:00, Info DISM DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Provider has not previously been encountered. Attempting to initialize the provider.
- CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2014-05-29 16:54:00, Info DISM DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-05-29 16:54:00, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Registering information from the help collection from provider: WimManager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
provider(WimManager).
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2014-05-29 16:54:00, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2014-05-29 16:54:00, Info DISM DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
2014-05-29 16:54:00, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2014-05-29 16:54:00, Info DISM DISM.EXE:
2014-05-29 16:54:00, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
Taweesak Archawamaitreekool
Maybe you are looking for
-
I need to run periodical task, how can I do so?
I have an application running in BEA Weblogic Server, it's a portal application in fact. I log every login try to my portal. My next task is too make summary of the data I've collected (every 24 hours). So I would like to run some task every 24 hours
-
User Task: Missing elements from payload
I have created a user task that sends an array of 'people'. The user can select the people they want and reject the rest by removing / setting blank values. I have checked that the payload is being set as an array, but the JSP screen for the task onl
-
My built in youtube app on iphone 4s isn't working!!
hi guys my youtube app used to work on both 3g signal and wi-fi but lately it says "cannot open " when i want to watch a video with a 3g signal but it works with a wi-fi signal i dont know whats caused this problem i havent jailbroken or downloaded a
-
I have a problem with using my phone that started several weeks ago and has been steadily getting worse. When I make a call, the person on the other end answers and I can hear them but they can't hear me. This also happens occasionally when someone c
-
My Browser's Freeze when I try to upload a file
I am using Yosemite and when I try to upload a file using either safari, chrome or firefox I get the beachball and my browser just gets stuck. I have try different type of websites and the browser reacts the same. As soon as I click the link on the s