Windows 10 HP pavilion a1510y Solution For Graphics ATI Radeon Express 1100

I want to upgrade to Windows 10 from Win 7but can not due to outdated Graphics Which is the ATI Radeon Xpress 1100 Integrated graphics. Is there a way to fix this problem or upgrade to a higher graphics card. And what type of card should be used. or can any graphics card function inside the case I can not upgrade without a new card I am assuming. Would the purchase of a new card be worth the effort of should I just upgrade to a new PC

I have an HP a1510y Computer with graphics ATI Radeon Express 1100 can I make it compatible with Windows 10 ? larry4436

Similar Messages

Graphics ATI Radeon HD 4670 256 MB

can i use Graphics ATI Radeon HD 4670 256 MB for gaming and graphics design

It depends on the game. I play SC2, and I can play with all of the settings on moderate and it looks great. Any games much older than that and you can run on high. Graphic design, not so sure. Hope this helps!

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Can't install driver for my ATI Radeon 9800 XT VGA card!

Hello:
I own a computer with these specs:
Operating System Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
Computer:
Computer Type ACPI Uniprocessor PC
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
Internet Explorer 7.0.5730.11 (IE 7.0)
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2400 MHz (18 x 133)
Motherboard Name MSI 845E Max (MS-6566E) (6 PCI, 1 AGP, 1 CNR, 2 DDR DIMM)
Motherboard Chipset Intel Brookdale i845E
System Memory 512 MB (PC2100 DDR SDRAM)
DIMM1 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
DIMM2 256 MB PC2100 DDR SDRAM (2.5-3-3-6 @ 133 MHz) (2.0-2-2-5 @ 100 MHz)
BIOS Type AMI (09/13/04)
Communication Port Communications Port (COM1)
Communication Port Communications Port (COM2)
Communication Port ECP Printer Port (LPT1)
Display:
Video Adapter RADEON 9800 XT - Secondary (256 MB)
Video Adapter RADEON 9800 XT - Secondary (256 MB)
3D Accelerator ATI Radeon 9800 XT (R360)
Monitor LG F900B [19" CRT] (121137790)
Multimedia:
Audio Adapter Realtek ALC650 @ Intel 82801DB ICH4 - AC'97 Audio Controller [A-1]
Storage:
IDE Controller Intel(R) 82801DB Ultra ATA Storage Controller - 24CB
Floppy Drive Floppy disk drive
Disk Drive IC35L060AVV207-0 (60 GB, 7200 RPM, Ultra-ATA/100)
Optical Drive SAMSUNG CD-R/RW SW-252S (52x/32x/52x CD-RW)
Optical Drive TEAC DVD+RW DV-W58E (DVD:8x/4x/12x, CD:32x/16x/40x DVD+RW)
SMART Hard Disks Status OK
I just replaced my old graphics card NVIDIA GeForce2 MX/MX 400 with another old model card, ATI Radeon 9800 XT. Everything was fine until I tried to update a recent ATI driver after uninstalling my old Nvidia driver with DriverCleaner Pro. I get this error message:
"Setup failed to launch installation engine: Class not registered"
Then, tried to install the driver through device manager with the update driver option. I directed to the driver folder on my desktop and the driver update went through, smoothly. However, when I put my computer in standby mode and then restore to full operation
I got a BSOD with this error msg.:
ati2dvag.dll-Address BF039614 base at BF012000, DateStamp 49344e53
Now I can't use standby mode because the computer just shuts down instead of operating in standby.
Is there any idea why my new card is not being fully accepted in my OS and how can I fix this issue. BTW, my ATI card is an 8x speed and my AGP slot supports a max of 4x speed, but I think my card is reverse compatible with 4x slot with the same voltage (1.5V).

Thank you BOSS for your quick response:
I took your advice and reinstalled my OS, but unfortunately stand-by mode is still causing errors. The only difference is that I managed to install the ATI driver normally and no BSOD, so far.
I'm not sure what is causing this, but my humble guess would be that my ATI card is an OEM card which is pulled form a working dell computer and these cards sometimes do not integrate well when installed on non dell motherboards... However, I need to find out that that is absolutely the case before I remove my vid. card from my system
There is a memory dump file that contains the info about this error but I can't decipher...I'm not a computer savvy, but you or someone here my find the root of the problem in that file. If that will be of any help to provide you with I will, next time.
Thanks in advance!!!

What is a good replacement for the ATI Radeon X1900 XT on a late 2007 Mac Pro

I recently took my late 2007 Mac Pro to the Apple Store because it was running quite loud. They diagnosed the problem as the fan on the ATI Radeon x1900 XT video card. Whie the card works fine otherwise, I was thinking of replacing it. I noticed some online recommendations that I need to upgrade to perhaps the Radeo HD 4870 if I want to install FCP X on this machine. I do use the Mac Pro for video editing, but haven't switched yet to FCP X. Anyone have a suggestion on a replcement video card that will work both on this machine and will be compatible with FCP X.
Thanks for any advice.

<http://store.apple.com/us/product/MC742ZM/A/ati-radeon-hd-5770-graphics-upgrade- kit-for-mac-pro-(mid-2010)>

Compatible video card upgrade for my ATI Radeon HD 5750 with 1GB of GDDR5 memory, iMac 27 " mid 2010 2.93 GHz

My graphic card (ATI Radeon HD 5750) is completely taking a dive. What I need to know is what I can upgrade this card with... Can anyone give me some advice here? If I am going to replace it, I may as well upgrade!
Thanks for your help!!

How is this problem resolved...I am having the EXACT same problem???

Replacement for an ATI Radeon X1900 XT

I have a MacPro1,1 Dual Core Intel Xenon 3GHz with a bus speed of 1.33GHz.
I have the hard drive bays full and am generating a good deal of heat. I am using smc fan control, with only limited success at helping my problem. That problem is that I believe the video card is over heating, and causing video anomalies and lockups.
I use the box for graphic intensive applications as a photographer in my studio. I need this thing to work all the time.
Can someone recommend a top quality replacement video card that will run cooler, but still have the horsepower. I drive dual 21 inch digital monitors.
I appreciate any input you might have.
Pete

Have you not seen and read how important it is to pull the X1900 every couple months to clean out dust that clogs it up?
Your hard drives should not run overly warm though some do hit 40's. Most drives in the last year or so run quite well, and cool enough.
If you want to dump the X1900, the 4870 is a good investment, and there are multiple threads this week of X1900 owners.
It doesn't take a lot to drive two 21-23" monitors. High performance usually means it needs good fans and cooling, but also produces heat. There are copper coolers for any video card.
And if you have lockups, you have drive directory corruption and problems with the file system as a result unless you really keep on top of repairs immediately on the next boot and have Disk Warrior on another hard drive, and, a good backup. One reason to keep the OS / Apps separate from all other data.
The 3GHz may also be running on the warm side. And FBDIMMs got better, but those are one of the main sources of heat. Some 4GB makes though are made to be cooler than even 1 and 2GB modules. Those should definitely be kept to under 75C and if possible 65C.

What is the correct installation sequence for my ATI Radeon 9800 PRO MAC AGP 128MB into my Quicksilver 867 G4?

Hi.
I just got my used ATI Radeon 9800 PRO MAC AGP 128MB card.
What is the correct installation sequence into my Quicksilver 867 G4 running 10.4.11 on one drive 10.5 on another?
The original NVIDIA GeForce2 MX - 32MB SDRAM went bust.
Is the driver build in 10.4?
Do I remove the old driver?
If I need to install the driver that came with it, (10.3.6) should the card be installed first?
What about firmware updates?
Thank you for all your time and patience.
W.W.

I think it's the card, but here are some files that may affect it...
/Users/YourUserName/Library/Preferences/ByHost /com.apple.preference.displays.<12digitHex#>.plist
/Library/Preferences/com.apple.windowserver.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.windowserver.<12digitHe x#>.plist
/Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences.<12digitHex#>. plist

Is there a replacement for an ATI Radeon 9600XT??? and where is it?!

My ATI Radeon 9600 xt is overheating, sticking and acting crazy...thought about putting a fan (band aid ) on it...but would rather replace it...any other compatible cards with a dual DVI and tv port? Everything online seems to be either discontinued or refurbished for over $200...help!
thnx in advance

Most of the AGP cards have been discontinued as PCI-e is just so much better. You might try checking at computer repair shops that aren't big business like Bestbuy & such, they may have older cards you could buy, or try on places like Ebay/Amazon/Pawn shops/etc.
The 9600 xt isn't dual DVI either afaik. I believe it's just TV, DVI and VGA.
Otherwise you could take a look at these:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814187122
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130465
http://www.newegg.com/Product/Product.aspx?Item=N82E16814187045
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130452
etc. down the list.
Here's the rundown I was pulling from as well. Some of them have HDMI output instead of the S-Video as well.
http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100007709%2060000785 0&IsNodeId=1&name=AGP%204X%2f8X

Will the mid-04 AGP 2.5 DP work with PCI-X graphics (ati radeon 7000?)

Got a G5 with a burnt out AGP slot, will it work with this? ---->http://www.ebay.com/itm/Apple-Mac-G4-G5-ATI-Radeon-7000-PCI-64MB-Video-Card-DVI- VGA-S-Video-TV-Out-OS9-/200710223413#vi-content

Okay now is there any possible fix? I just turned it on and it the display came up just fine. But then I tried to boot it off of my powerbook from firewire and no show.I don't have it screwed down because I have been swapping cards but should I try that or are there any other suggestions?

B540P Win 8 Solution for Graphics card, touchscreen & Sound problem!

First of all,.. It irritates me that I had to use 2 days of nonstop testing to find my OWN 100% working solution to make my All In One work. There has been absolutely no helpful info from the support staff of Lenovo on this problem. And it seems that quite a few users have had the same problem as me. Now,.. If there was no solution yet for the driver compatibility for running WIN 8, it would have been fair But as there is obviously a WORKING solution, it irritates me that the staff haven't been able to find out what I did. I mean,.. win8 is new,.. But NOT that new, so the staff should be able to provide a solution much much sooner. If I wasn't a real TechGeek, who have been messing around with this since the birth of PC's, I would probably have had no chance to resolve this problem on my own. Which would have resulted in me delivering an otherwise really amazing computer back, as it would have been close to impossible to use.
Now for the solution:
When I installed win 8, I was pretty fast left with a bunch of problems. Touch was glitchy, the touch soundbar was stuck on top left corner, which left the PC hanging. Graphics card was standard and it was impossible to use apps like Netflix etc. To solve this problem do following:
A. Install realtek audio driver version 6.0.1.6662 (if you already have a stuck soundbar, disable sound under devicemanager first. This will make you able to use the pc if it also hangs)
B. Install Nvidia driver version 9.18.13.593 ) link: http://support.lenovo.com/en_GB/downloads/detail.page?DocID=DS031642&rss=true IMPORTANT!!: when installing nvidia driver choose custom and untag the audio driver. If you install Nvidia's audio driver, you will get all the problems, witch stuck screen, stuck volume bar, as this is where the compatibility issues is. Only install the Graphics and Physx software, and you will be fine
C. Install FN Keyboard driver
If you did as above your now fine to go with a B540P that will run as it's supposed to . No more stuck of anything!
You can also install the the win7 driver for remote control. I'm still yet to make the TV tuner card work, as I didn't have the time to look into that yet. Will most likely have a solution on that in 1 days time, when I get the chance to look deeper into it. Will of course post solution here when I got it.
TechGeek over and out for now

Well from what you write im pretty sure its in the resolution and/or refresh rate the problem is located. That will make your monitor shut down or not turn on if set wrong. From what i remember also analog and dvi have a different range of refresh rates. What about hdmi? Does the card have this? So you could try connect it to the tv,. Some tvs also have DVI. I would try find a tv or monitor with pure dvi, not using analog adapter.,.. connect it,. If it turns on. Lower resolution and refresh rate and connect it back again to your monitor. If that doesnt work that would leave me puzzled . Thinking back,.. I actually remember I had a smiliar problem in the past,. I just can't remember how it was solved,. But the "error" was in the whole resolution, refresh rate, analog adapter vs dvi spectre.,.. maybe it was something with the dvi to analog adapter,.. hmm can't remember.. Well anyways. Put your focus there. Not on the win8 drivers for now at least

My ipod is not being recognized by Windows XP. Any Solutions for this problem?

When I plug in my ipod to my ASUS Netbook it says, "Usb Device Not Recognized". When I tried a different device it vworked fine, so is there a problem with the ipod itself?

What were the other devices? If not an iPod touch, iPhone or iPad then try:
iOS: Device not recognized in iTunes for Windows
If one was one of those devices then time for an appointment at the Genius Bar of an Apple store.

Ovi Suite 2 on Windows 7 maybe a solution for slow...

I was having issues with Ovi Suite on Windows 7, instead of using the normal when connecting select PC Suite, I chose Mass Storage instead the other night and it now syncs a lot faster, normally for me it fails.
just my 2 cents
what do other think? Try it and let me know?

Hi,
What Ovi suite version you are trying to use?
I think the best thing at this point is to reboot your PC. Once rebooted then please check that there is no nokiaovisuite.exe running in Task Manager (just to be sure it is not automatically started). Then start Ovi Suite (you can start it also as an admin if needed). Make sure you are not trying to run Nokia Software Updater at the same time.
It would be helpful if you could also provide your system details for us.

Which monitor to buy for the ATI Radeon 9800 Pro w/256MB?

Has anyone successfully hooked an LCD through the DVI port at a resolution other than the 1920x1200 max resolution stated on the ATI box? Would a native resolution of 1680x1050 work with this card?
I was thinking about getting the Gateway FPD2185W monitor. Has anyone else had good results with this monitor?

I have settled on the Gateway FPD2185W. This is a great 21" widescreen, and the ATI card handles the pivot capability very nicely. It's not automatic like on a PC but it does work.

Cant find driver for graphics AMD Radeon 6600M and 6700M series / Intel(R) Graphics 3000

my graphic drivers doesnt work so my screen in stretched and wide then the usual. My hp assitant recommades the following two graphics drivers
AMD Radeon 6600M and 6700M series
version: 14.501.1003.0
Intel(R) Graphics 3000
version: 9.17.10.2932
cant any one help me reconfiguer my screen
HP Envy 14

Hi:
What is the full model number of your Envy 14 notebook and what operating system are you running on it?

Windows 10 HP pavilion a1510y Solution For Graphics ATI Radeon Express 1100

Similar Messages

Maybe you are looking for