Windows 10 in SCCM 2012/SCEP (system center endpoint protection)

I have been able to put my test machine into SCCM 2012 R2. But it seems that SCEP won't work, this is the message:
System Center Endpoint Protection cannot be installed on your operating system. Windows Program Compatibility mode is not supported by this program.  <a>For information about supported operating systems, see the online Help</a>. Error code:0x8004FF71.
Will we be able to test SCEP in any of the upcoming versions?

I have the same situation during a pre pilot phase in a customer environment, but still no sulution

Similar Messages

  • SCCM 2012 SCEP: FW Provider (Endpoint Protection)

    Hi all,
    Situation:
    On our Thin Clients (WES7) we install FEP in the tasksequence. This makes the system ready after deployment.
    But after a full deployment the SCEP FW Provider is not installed, it needs a service window to install en reboot the system.
    Is there a way / cmdline to manually install the FW Provider in the tasksequence?
    ================================================
    Skip sending state message due to same state message already exists.    EndpointProtectionAgent    28-5-2014 13:16:19    3052 (0x0BEC)
    FW Provider is NOT installed yet.    EndpointProtectionAgent    28-5-2014 13:16:19    3052 (0x0BEC)
    Endpoint is triggered by WMI notification.    EndpointProtectionAgent    28-5-2014 13:16:19    3052 (0x0BEC)
    File C:\WINDOWS\ccmsetup\SCEPInstall.exe version is 4.1.522.0.    EndpointProtectionAgent    28-5-2014 13:16:19    3052 (0x0BEC)
    EP version 4.4.304.0 is already installed.    EndpointProtectionAgent    28-5-2014 13:16:19    3052 (0x0BEC)
    EP 4.4.304.0 is installed, version is higher than expected installer version 4.1.522.0.    EndpointProtectionAgent    28-5-2014 13:16:19    3052 (0x0BEC)
    ================================================

    Thanks to John Marcum I got the answer on twitter.
    The FW Provider = windowsfirewallconfigurationprovider.msi in the SCCM client directory.
    Installed the msi in the deploy tasksequence:
    ================================================
    Start to send state message.    EndpointProtectionAgent    28-5-2014 16:40:12    1096 (0x0448)
    Send state message successfully    EndpointProtectionAgent    28-5-2014 16:40:12    1096 (0x0448)
    Firewall provider is installed.    EndpointProtectionAgent    28-5-2014 16:40:12    1096 (0x0448)
    Installed firewall provider meet the requirements.    EndpointProtectionAgent    28-5-2014 16:40:12    1096 (0x0448)
    start to send State Message with topic type = 2001, state id = 3, and error code = 0x00000000    EndpointProtectionAgent    28-5-2014 16:40:12    1096 (0x0448)
    ================================================

  • No System Center Endpoint Protection on my Windows 8.1 client?

    I'm trying to install the SCCM 2012 SP1 CU3 client on a test Windows 8.1 computer.  The client install seems to go well, components install and enable but I do not see the System Center Endpoint Protection tool in the tool tray on the 8.1
    client like I see on Windows 7. 
    How can I check to see if SCEP is installed and working?
    Thanks,
    FP

    Hi,
    In addition, you also need to install Endpoint Protection Point role to manage SCEP clients.
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • System Center Endpoint Protection creates TEMP Folders / Reinstallation not possible

    Hi all,
    After I updated from SCCM 2012 RTM to SCCM 2012 R2 CU2 I have an issue on several Servers, which havin System Center Endpoint Protection 2012 installed (provided through SCCM Agent).
    There are hourly Temp Folders created in C:\Windows\...:
    The Temp-Folders are including SCEP 2012 Content...
     This files are filling up my System drive C:\. I always have to delte those files.
    I think System Center Endpoint Protection is trying to reinstall or update itself, and failes...
    If I try to uninstall "System Center 2012 Endpoint Protection" manually from the sever, i get the following popup (file not found):
    I cannot find the correct Version of this msi-File "fepclient.msi", so I click Cancel, and then I get the Error 0x8007064C (Cannot complete uninstall wizard).
    I have this Problem on 4 different Servers right now (FileServer, two Citrix Server, SCCM-Server).
    I tried several steps on the SCCM Server:
    - Manual Uninstall
    - Re-Installation with "scepinstall.exe" from the SCCM Client Source (same error)
    - Re-Installation from SCCM Console (Push)
    I am not getting rid of this error... I do not want to delete registry keys and testing arround because this are productive Servers... Any ideas how to resolve this one???
    If you Need more Details about the infrastructure / OS, just ask.
    Patrik

    Reinstalling the SCCM Agent did not help to get any additional log-Information.
    But I did no found a log-file in C:\ProgramData\Microsoft\Microsoft Security Client\Support\MSSecurityClient_Setup_4.5.216.0_epp_install.log
    I find the following warnings / Errors:
    TEMP Folder which is created in C:\Windows\...:
     MSI-Missing:
    But that does not really help me...

  • Unable to update System center Endpoint protection

    In System center Endpoint protection ,Virus and Spyware definitions are out of date...When trying to update its showing below error..
    This issue persists for users in my company. we are using Windows 7 SP1 Enterprise version, SCCM 2012.  .
    How to resolve this issue?

    Hi,
    0x80240038 WU_E_WINHTTP_INVALID_FILE The downloaded file has an unexpected content type.
    Please check WUAHandler.log and Windowsupdate.log on the client to see whether there are some helpful information.
    You could also check the following link.
    http://answers.microsoft.com/en-us/protect/forum/mse-protect_updating/unable-to-install-definition-updates-for-mse-error/42891758-ef28-4554-a6df-e78598414411
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • ISE and Microsoft System Center Endpoint Protection AV Posture Issues

    We are deploying an Enterprise ISE Infrastructure. The Customer has adopted Microsoft System Center Endpoint Protection ver 4.x as its approved AV. NAC Agent detects the AV. It however has issues detecting the Definition Files.
    See Log File below:
    7721: XXXX-JOSE-W54: Aug 22 2014 11:03:00.624 UTC: %NACAGENT-6-OPSWAT_PROD_ENG: %[sev=info][prodtype=AV/AS][func=OpswatChecks::GetAllAVInfo]: ID: MicrosoftAS - Product Engine Version, Result: rcInternalError
    7722: XXXX-JOSE-W54: Aug 22 2014 11:03:00.624 UTC: %NACAGENT-6-OPSWAT_DAT_FILE_VER: %[sev=info][prodtype=AV/AS][func=OpswatChecks::GetAllAVInfo]: ID: MicrosoftAS - Product File Version, Result: rcInternalError
    7723: XXXX-JOSE-W54: Aug 22 2014 11:03:00.624 UTC: %NACAGENT-6-OPSWAT_DAT_FILE_SIG: %[sev=info][prodtype=AV/AS][func=OpswatChecks::GetAllAVInfo]: ID: MicrosoftAS - Product Data File Sig, Result: rcNotSupported
    7724: XXXX-JOSE-W54: Aug 22 2014 11:03:00.624 UTC: %NACAGENT-6-OPSWAT_DAT_FILE_TIME: %[sev=info][prodtype=AV/AS][func=OpswatChecks::GetAllAVInfo]: ID: MicrosoftAS - Product Data File Time, Result: rcInternalError
    7725: XXX-JOSE-W54: Aug 22 2014 11:03:00.624 UTC: %NACAGENT-6-OPSWAT_DEBUG: %[sev=info][prodtype=AV/AS][func=OpswatChecks::GetAllAVInfo]: OPSWAT AV/AS Retrieval Time(sec) Info for MicrosoftAS: total=0.0000, pid=0.0000, vendor=0.0000, desc=0.0000, vsn=0.0000, type=0.0000, engineVsn=0.0000, dataFileVsn=0.0000, sig=0.0000, dataFileTime=0.0000
    7726: XXXX-JOSE-W54: Aug 22 2014 11:03:00.640 UTC: %NACAGENT-6-OPSWAT_DAT_FILE_SIG: %[sev=info][prodtype=AV/AS][func=OpswatChecks::GetAllAVInfo]: ID: MicrosoftAV - Product Data File Sig, Result: rcNotImplemented"
    NAC Agent version is 4.9.4.3 and CM version 3.6.9186.2

    Hi,
    Yes you can install the Endpoint Protection Client in the image, the process for doing this is described here:
    http://technet.microsoft.com/en-us/library/dn236350.aspx You can configure it manually to use Windows Update as the source for definition updates before the imaging as well then you should
    be good to go.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Remove system center endpoint protection (scep) from clients

    Hi,
    I enabled scep for my whole domain, now I would like to remove some clients of smaller servers which have less performance (also specific template policy for performance scep didn't help).
    I created a new client setting in which I enabled the scep for a specific collection only, the default has no scep enabled.
    However, scep is not uninstalled for clients which are not member of the specific collection.
    Please advise howto remove scep clients.
    S.
    SteveWonB

    One more thing, off the record, do you need to create auto deployment rules of SCEP, according to windows-noob.com you do.
    http://www.windows-noob.com/forums/index.php?/topic/4466-using-sccm-2012-rc-in-a-lab-part-5-enable-the-endpoint-protection-role-and-configure-endpoint-protection-settings
    Somewhere else I see that updates are done automatically (CBT Nuggets instruction video of SCEP install).
    These updates are slowing down my machines: although I selected superseded: no, in updates, it downloads day per day definition updates and applies them. Whereas I would think it downloads only the latest definition file ....
    SteveWonB
    hi,
    please note that the link above has been replaced with new content since Configuration Manager 2012 went RTM, to see the new version review
    this post.
    Step by Step Configuration Manager Guides >
    2012 Guides |
    2007 Guides | I'm on Twitter > ncbrady

  • SCCM 2012 : Deploying System Center Configuration Manager 2012, Required Desinging Help.

    Hi,
    I required some one to help designing an SCCM 2012 Solution. I dont have any knowledge on Design Part,  This is my first deployment
    My goal: Interconnect 3 remote offices and  The infrastructure is as follows:
     Primary Site Server ( HQ )    : 1000 users
     Secondary Site ( Location1) : 2000 Users
     Secondary Site ( Location2) : 2000 Users
    Link Between Primary and Secondary Sites : 8 MBPS MPLS link
    Database will be installed on a remote SQL 2012 Server.
    Please let me know is there any tool to generate Design document.
    If possible please design and put the Image on the blog.

    Why using a remote SQL server? I'd install it locally. There is no tool available.
    Just make sure that you are using a standalone primary site (therefore no CAS) and place a secondary at location 1 and 2.
    Torsten Meringer | http://www.mssccmfaq.de

  • System Center Endpoint Protection Licensing?

    Hi there,
    I want to implement System Center 2012 R2 Endpoint Protection in the business. We have a Silver membership, so we do have the license for System Center 2012 R2. What I don't get is if Endpoint protection is separate or not from a licensing point of view.
    Do we have to pay for subscriptions or not? And how much? It's just confusing because Microsoft doesn't make it clear. Sure I can install SCCM....but that is pointless if I can't use Endpoint Protection.
    Thx in advance

    Hi,
    About SCEP, it depends upon the client ML you purchased, is either included or additional.
    You could find more information from the following link.
    Server and cloud pricing and licensing
    http://www.microsoft.com/en-us/server-cloud/pricing-and-licensing.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • System Center Endpoint Protection Definition Updates

    Hi can anyone advise deploying definitions via SCCM 2012 and selecting the source as being "Updates distributed from Configuration Manager" does that mean each client will go to the Primary Site to get updates? Or by using ADR will it ensure that
    definitions come via distribution points?
    Also another question, as sccm 2012 is not rolled out to all sites yet, and will be deploying unmanaged clients, when I deploy the SCEP client offline un-managed with a policy file, is there a way then later to change policy on the client by command line?

    You could configure updating SCEP in many ways, including:
    Updates distributed from Configuration Manager – This method uses Configuration Manager software updates to deliver definition and engine updates to computers in your hierarchy.
    Updates distributed from Windows Server Update Services (WSUS) – This method uses your WSUS infrastructure to deliver definition and engine updates to computers.
    Updates distributed from Microsoft Update – This method allows computers to connect directly to Microsoft Update in order to download definition and engine updates. This method can be useful for computers that are not often connected to the business network.
    Updates distributed from Microsoft Malware Protection Center – This method will download definition updates from the Microsoft Malware Protection Center.
    Updates from UNC file shares – With this method, you can save the latest definition and engine updates to a share on the network. Clients can then access the network to install the updates.
    For more details, please refer to:
    http://technet.microsoft.com/en-us/library/jj822983.aspx

  • System Center Endpoint Protection Antimalware client version - wont upgrade

    Hi
    Running SCCM 2012 SP1 CU4 on Server A. Endpoint Protection role on Server B. Both Servers 2008 R2. there is only one primary site server and no secondary sites in the hierarchy.
    All clients are Windows 7.
    The SCEP client is not upgrading on clients as I would have expected. After enabling the automatic client upgrade option in site hierarchy settings I found all the clients upgraded their SCCM agent. I was expecting the SCEP client to be upgraded also. Machines
    have been rebooted since the SCCM agent upgrade.
    How can I go about upgrading the SCEP agent on all computers?
    Many thanks

    Hi Daniel
    I can't find this file in %programfiles%\microsoft configuration manager\logs, or %programfiles%\sms_ccm\logs. Can you tell me where this log file is?
    I think I sorted the issue, some of the boundaries weren't in a boundary group. Now some of the SCEP agents are upgrading. There are still some issues but I guess I'll do some reinstalls and see if I can resolve this this way.
    Common installation issues I'm seeing are 0x8004FF91 or 0x8000ffff,
    for example. These are found in the c:\windows\ccm\logs\EndpointProtectionAgent.log on the clients.
    Thanks

  • System Center Endpoint Protection

    How can processes or files be excluded via a wildcard?  In FEP you could simply type in a filename (i.e. blah.exe) and it would be excluded.  SCCM 2012 doesn't seem to support excluding with just a name, it wants a full path.  I tried %blah.exe%
    however that doesn't seem to exclude it.

    More info:
    System Center 2012 Configuration Manager Antivirus Exclusions
    http://blogs.technet.com/b/systemcenterpfe/archive/2012/11/29/system-center-2012-configuration-manager-antivirus-exclusions.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Manage System Center Endpoint Protection (SCEP) policies for Internet-based clients

    Hi,
    I've recently change my SCCM configuration in order to allow internet-based clients registered in our domain to communicate with our primary site server. The objectives were to let us manage the SCEP policies of these clients and receive alerts
    when they're infected even when they are on the road, so not connected to the local network.
    Now, everything seems to be in place; PKI certificates for server and client, the DNS is configured, firewall route too...but I still cannot update the policies of my client when it's not connected to the local network.
    I'm able to reach my primary site from my client when connected outside the network, but the policies won't update until I connect to the local network.
    Is it actually possible to manage the policies and receive alerts from internet-based clients like I'm trying to do?
    Thank you very much for your help

    It's going to come down to log checking at this point to find where the failure is happening or the connection is not happening.
    Initiate a machine policy refresh and watch the two logs noted above.
    CAS.log may also be helpful as well as locationservices.log and clientlocation.log.
    Try deploying an app as well and watch the logs.
    Also, if the client is not properly getting policy, there's no way for it to know that you disabled client CRL checking on the site.
    Jason | http://blog.configmgrftw.com
    Ok so now I see an error in clientlocation.log that might be the cause of my problem.
    [Domain joined client is in Internet]
    [Rotating internet management point, new management point is : SERVER.DOMAIN.COM ...
    [Unable to retrieve AD forest + domain membership] <- Pretty sure this is related to my issue
    I guess it's because my AD schema is not extended, is that right?
    EDIT: I thought this was the issue, but the AD schema seems to be extended already. Any idea of what could cause this error?
    EDIT: Do I need to open ports in order for my client to be able to reach the AD or something? I thought that was the MP's job once we granted him full control access on the AD. Am I wrong?

  • System Center Endpoint Protection updates not applying to DirectAccess clients

    Hi
    I have W2008R2 SP2 with SCCM2012R2 CU3 server.
    We started testing DirectAccess. All other updates (Windows, Skype, Adobe) are applying except SCEP.
    Initiating policies from laptop did not helped.
    DirectAccess subnet is in boundary list.
    Computer account is in correct collection. SCEP only updates when laptop is on LAN.
    Where to look to resolve this problem?

    Yes, the boundaries that you put in SCCM which specify your DirectAccess client computers must be the IP addresses they are using, which are the IPv6 addresses given to them via their DA transition technologies (6to4, Teredo, IP-HTTPS). Depending on how
    you setup DirectAccess, you may only have some of these available for the clients to utilize. If your DA server is sitting behind a NAT, or if you used the "Getting Started Wizard" to setup DA, then only IP-HTTPS is available to your DA clients and
    that is how they are all connecting. In that case you should only need to add the IP-HTTPS IPv6 prefix.
    You can use this info to calculate the prefixes, or you can check in the SCCM agent on the client machine, I believe in the section where it shows you the heartbeat it will also show you the current prefix that your client is utilizing:
    First Public IPv4=WW.XX.YY.ZZ (address on the DA server)
    2001:0:WWXX:YYZZ::/64 (Teredo)
    2002:WWXX:YYZZ:8100::/56 (IP-HTTPS)
    2002:WWXX:YYZZ:8000::/49 (organizational prefix)
    2002:WWXX:YYZZ:8000::/64 (ISATAP)
    2002:WWXX:YYZZ:8001::/96 (NAT64/DNS64)

  • System center endpoint protection update from WSUS faild on some computers: error 0x80070005

    Hi, some computers, not all fail to update from WSUS.
    Manual installing the full updates works.
    From Windowsupdate.log:
    WARNING: Failed to delete old install directory at C:\Windows\SoftwareDistribution\Download\Install. This may block future installs.
    I also cannot manually delete this folder, after a fresh reboot there is no more Install folder.
    From System logs:
    Sorry, the errors are in German:
    Beim Aktualisieren der Signaturen wurde von Microsoft-Antischadsoftware ein Fehler festgestellt.
         Neue Signaturversion:
         Vorherige Signaturversion: 1.169.55.0
         Aktualisierungsquelle: Interner Server für Definitionsupdates
         Aktualisierungsphase: Installieren
         Quellpfad: http://sus-server:80
         Signaturtyp: AntiVirus
         Aktualisierungstyp: Vollständig
         Benutzer: NT-AUTORITÄT\SYSTEM
         Aktuelle Modulversion:
         Vorherige Modulversion: 1.1.10401.0
         Fehlercode: 0x80070005
         Fehlerbeschreibung: Zugriff verweigert
    Beim Aktualisieren der Signaturen wurde von Microsoft-Antischadsoftware ein Fehler festgestellt.
         Neue Signaturversion:
         Vorherige Signaturversion: 1.169.55.0
         Aktualisierungsquelle: Microsoft Update Server
         Aktualisierungsphase: Installieren
         Quellpfad: http://www.microsoft.com
         Signaturtyp: AntiVirus
         Aktualisierungstyp: Vollständig
         Benutzer: NT-AUTORITÄT\SYSTEM
         Aktuelle Modulversion:
         Vorherige Modulversion: 1.1.10401.0
         Fehlercode: 0x80070005
         Fehlerbeschreibung: Zugriff verweigert
    Client is manually install, unmanaged, no SystemCenter server.

    I know this is an old post, but I've seen this several times on client pc's.  Seems to happen only with .NET updates, it'll install one, then fail the rest.  Windowsupdate.log file shows   WARNING: Failed to delete old install directory
    at C:\windows\SoftwareDistribution\Download\Install. This may block future installs.   It seems like concurrent installs fail because of this folder, and like the OP, when I reboot, that folder is gone and I can install the next update, which fails
    the remaining updates, and then we repeat the process.  This actually happened to me today new pc build, installed .net 4.0, .NET updates fail with error code 80070005. Yes, I'm logged in with an admin account.   Anyone have any suggestions? 
    I can post log files or whatever if needed.
    Tim Magnuson | MCTS, MCITP | MCCA 2011 |
    Ok, so I changed my name...you can still call me Tom if you like. It's a...jump...to conclusions...mat.
    My Blog Site: http://tmagnuson.wordpress.com

Maybe you are looking for