Windows 10 mobile build 10149 has dropped. Who is testing it out

I bit the bullet last night and updated my HTC One m8 to W10 mobile build 10149. I was on WP 8.1 update 2. The update when fairly smoothly. Though it did take about an hour to finish up. You can really see the polish in this build compared to previous ones. It feels just as snappy and smooth as WP 8.1. The start screen is finally fixed and scaling correctly on my display. The few things I've noticed already:New animations when launching apps. Instead of pivoting from right to left, they now fly out from the center of the screen on the start menu "iOS 8 style".You can swipe down from the top of the screen to show all the settings in the notification center.Holding the start button now brings a reachability function across the OS by pulling the top half of the screen down to a more thumb friendly middle position.As expected there are...
This topic first appeared in the Spiceworks Community

Does this apply to WP7.1 (aka WP7.5) apps or only to WP7.0?
I am 99% sure I was able to run my own WP7 apps on Windows 10, and at least one of those apps was a really old WP7 build (possibly WP7.1, but I don't remember for sure).
I removed Windows 10 from my device because it's not in a usable state for me, so I can't verify which apps work and which don't.
I hope this doesn't mean the store will shrink in size significantly. I would expect a lot of WP7 apps will not be updated by developers. I have no interest in updating my own older apps since there is no benefit to me in spending the time.
Do we know what % of the store is WP7-targeted apps?
Visit http://blog.grogansoft.com/ for Windows development fun.

Similar Messages

Windows 7 Elements 1.0 has brush dynamic Stylus option greyed out

I use photoshop elements 1.0 on a windows 7 laptop with a wacom CTE-430. When I check brush dynamics, the Stylus option is greyed out so I cannot use pressure sensitivity to adjust the brush size. The option works fine on my desktop with Windows XP, so I can't figure out what I need to do to fix it.

Well, I"m sure that Adobe would say that PSE-1 (?) is incompatible with Windows 7, but what do they know?
I would hit Wacom's site to see if they have an updated driver for your tablet, compatible with Windows 7.
You can also investigate running PSE in compatibility mode for XP SP-2.

FPS Has Dropped

I am attepting to edit the font colors for one of the templates in Motion 5, and I just now realized that after altering the colors, the video's playback FPS has dropped substantially. It starts out at around 30 FPS, and ends up at 2 FPS before the video is 5 seconds in. Is there any way to recover the old frames per second, or will the frames not be dropped when I export the project? Any help would be appreciated. Another question I had: How would I go about changing the font for the entire video? I've been having to select everything piece by piece in Inspector and changing it that way. I feel like there is a simpler method, although I have read the guide book and have not found one.
Thanks,
Phytrix

You probably have other things going on beside font color. What you're seeing is the Motion Render Engine playback FPS. When you export the project, it will play full frame rate. Motion is having to render everything on the fly, which can bog down when a lot is going on. Two things that will help.
1- In the Render menu, top right of the Canvas, turn off things you're not using, such as Shadow, Lighting, etc. Also, you can lower the Resolution and Quality settings if necessary. This only effect playback. You can reset them before export, or override them in the Export window.
2- Go to the Mark menu, use RAM Preview to render out the timeline and get better playback.
To duplicate parameter changes in one layer to other layers, there are two methods.
1- Select the first layer, then Option click the other layers, which will highlight them all at one time. Then in the Inspector change the desired parameter.
2- Change the parameter in the first layer. Then grab that paramter's title (such as "Font" or "Positoin"), or the title of that section (such as "Basic Formatting" or "Transform"), then drag and drop it onto another layer.

Sync drop even in test socket.

Currently in my 10 day waiting period having just signed up to BT, but unplugged the hub a few times to experiment with the orange wire and combinations of that and the i plate. My sync has dropped at the test socket from 1856 to 1216. Is this something that I have done, or am I right in thinking that the sync speed on the test socket will not change unless its a problem at the exchange?
Thanks in advance.
Dave

You could do a quiet line test by
dial 17070 option 2 and listen - should hear nothing
preferably with an analogue phone a digi one may have slight hiss otherwise silence
but only if it dont improve
If any post helps tick the star box on the left
Just cause Im paranoid dont mean they are not out to get me

Is Flash Builder dead? I just found out that adobe has dropped Flash on mobile devices

I did alot of research on software to develop apps for the mobile market. I liked Flash Builder since it will create apps for all 3 types of mobile devices at once. Downloaded the 30 day trial and have started on the 5 day training course.
Today I saw an article from sitepoint that abobe has dropped development and support for Flash on mobile devices.
The end result of Flash Builder gives you a .swf file in an html wrapper thus we are developing flash when adobe has dropped Flash for mobile. Am I wasting my time? Should I go to another software package?
http://www.sitepoint.com/adobe-abandons-mobile-flash/
Adobe Abandons Flash on Mobile Devices
HELP

the plugin for mobile browsers is the only thing they will not update in the future. The normal desktop browser plugin is very alive
Everything else is active... they are still continuing to work on exporting to Android,iOS, and rim playbook via AIRapps in both flash builder and flash pro.
The only difference going forward is mobile websites viewing flash (apps are unchanged). Basically... apple won
Not a big deal so far, but everywhere you look people are frantic and asking -whats next?
I like air for ios and android. Im sticking with it

Finding who has dropped th epartitions

Hi,
Can some body help me on how to find who has dropped the partitions in a table in oracle 10.2
Thanks
Lbn

Partitions can only be dropped by a schema and code that have permissions to drop those objects. So given the security model you have on that database, nothing incorrect was done.
If this happens not to be the case, and partitions were dropped "illegally", then the security model used is flawed.
And the first action should be identifying the flaws in the security model and fixing these - properly. A witch hunt for an offender will not fix or resolve anything.
As for finding the "offender" - unless you have auditing enabled, or archive logs to mine, there is no way to identify the "offender".
Rather fix your security model first. That is what the problem is. Not the fact that an "offender" (accidentally) manage to wipe partitions.

Apple Mobile Device Service Has Stopped working

Okay, I'm running 32-bit windows vista Buisness service pack one, and am getting the following message whenever I open iTunes: Apple Mobile Device Service has stopped working and was closed. This is not an issue connecting my iPod, which still connects fine, the issue arrises when I try to sync my new iPhone, and it is not recognized. Windows does recognize my iPhone, as seen in device manager and the fact that the phone charges when connected. iTunes will fail to recognize it due to the aforementioned error in starting itunes. The error log looks like this:
Fault Bucket 1303677566, type 1
Event Name:APPCRASH
Response: None
Cab Id: 0
Problem Signature:
P1: AppleMobileDeviceService.exe
P2: 2.50.39.0
P3: 49f9b7cf
P4:StackHash_228c
P5:6.0.6001.18000
P6:4791a7a6
P7:c0000374
P8:000b015d
P9:
P10:
Attached Files:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERDFFE.tmp.ver sion.txt C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERDFFF.tmp.app compat.txt C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERE04E.tmp.hdm p C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Report13cded57\WERECEC.tmp.mdm p
These files may be availible here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0d8e0c5b
I have gone through the basic troubleshoot on apple doing the following:
restarting iphone

sorry, i maxed out space in the last post.
The steps I have taken to remedy the error are the following:
restart iPhone
restart computer
check usp ports
reinstall entire iTunes package(updater, iTunes, quicktime, apple mobile device support) several times
I have also tried:
-Running itunes as administrator, which I already am
-restarting the apple mobile device service in services
-checking for third party conflicts by having only itunes and the apple mobile device start when the computer starts and installing/running itunes with my anti-virus off.
-updating AMDS(apple mobile device service) with older versions of the software from 8.1 and 7.7
-deleting usbaal.sys from 8.2 and reinstalling 7.7 and 8.1 version
I have tried various other fixes found online, In addition to spending two hours on the phone with various apple "experts" who were baffled by my problem.
This problem is giving me the upmost frustration and I am becoming incredibly angry at both vista and iTunes. Please help
-Kyle
P.S. If you didn't catch it, i'm running the latest driver updates and the latest itunes, 8.2

Dashboards for window 7 mobile

Are there plans to make apps for OBI dashboards on windows 7 mobile like there is for iphone Oracle Business Indicators?

Hi:
Install all the drivers listed under the chipset section.
If your model has an Intel graphics adapter, just install the Intel HD graphics driver listed under the graphics section.
You need the Realtek ethernet driver under network.
You need the Realtek card reader driver under storage.
I don't know what model wireless card your model uses, so please do the following and I will figure that out and tell you what drivers you need for that.
Go to the device manager and click on the device named Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the item named Hardware ID's.
Post the top string of characters you see in the window that start with PCI\VEN.
After you install the drivers I suggested you should have most of the devices installed.
You can find the hardware ID for any remaining devices needing drivers using the above approach and I will post the links to those too.
Unknown devices first line will not start with PCI\VEN. But post the top line for any of those too.

Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
in Update & Recovery Menu (PC Settings)
Build 10036 announced by rumour mill...
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

Microsoft Community got there first...
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
Thanks Andre da Costa
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
We only reply to questions posted in TechNet forums.
We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
There is no such thing as who gets "there" first.

Problem with System Metrics SM_CXSIZEFRAME + SM_CXPADDEDBORDER in Windows 10 Preview (Build 10041)

Maybe this forum is the wrong place to ask something about Windows 10 Preview, but I did not find a dedicated place to report
programming problems as opposed to user problems:
I program/maintain a 32-bit desktop (WIN32 API) application and try it now on Windows 10 Preview build 10041. I calculate the size of a window border with the help of the GetSystemMetrics function, using the constants SM_CXSIZEFRAME and SM_CXPADDEDBORDER.
Originally, I only used SM_CXSIZEFRAME. This returned 4 pixels instead of the expected 8 pixels that I got on all previous windows versions up to Windows 8.1. Then I learned that already since Windows Vista one is expected to add the value of SM_CXPADDEDBORDER
to get the full border size. (SM_CXSIZEFRAME alone only continued to work on Vista and beyond thanks to a little compatibility hack by Microsoft, with SM_CXSIZEFRAME still returning the full border size and SM_CXPADDEDBORDER returning
yet 0, at least for 32-bit programs like mine.)
Assuming that Microsoft finally switched off that compatibility measure on Windows 10 I query and add SM_CXPADDEDBORDER now as well. Unfortunately this does not solve my problem, as that system metric returns 0.
Just to be on the sure side, I declared my program to support Windows 10 by using an embedded manifest and using the corresponding <compatibility> / <supportedOS> line with the Windows 10 GUID - this did not help either.
As querying and adding those two system metric values is rather trivial (no need to include code in this question, I think), I don't have the slightest idea what
I could do wrong here, this looks like Preview bug affecting 32-bit programs to me...

I regret to inform you, that you have to live with this error for ever. Microsoft won't fix it... we reported an error of the Windows Error Reporting system (exists since Windows 8) and provided a reproduction (an application with one printed page of code,
so very small and easy). It has never been fixed. 3 developers at Microsoft are involved and they confirmed, that it's a bug ... but... no chance. It's a strange company... I don't know what they mean with "we listen to our customers".
PS: ja, nöd grad hilfriich mini Kommentär, aber die Type triibed eim eifach in Wahnsinn!! ... schinbar nöd nur öschtlich vo Bade, sondern au weschtlich
Rudolf

How do I fix my mac so that the window I am looking at has the focus?

I am a new mac user and at present beyond comprehension of how people cope with mac if they are not primarily mouse oriented.
Current problem.
I close an app using apple key W
It closes
I am looking at a window of another app. I want to close that too. Apple key W. Nothing. This window does not have the focus. No keyboard actions will make it do anything. And the bar at the top of the screen is still the bar for the app I have just closed, but that does not respond to the keyboard either. At this point, no keyboard action will affect either app.
As a one time developer I have to say that in any context I am familiar with this would be considered a major show stopping bug, and the programmer would get into a lot of trouble if the software went out in this condition.
Certainly, for a user who lives by the keyboard coming from linux / windows, both of which do what I consider sane and sensible things in all places and at all times, this is a major *** situation!
Please can someone tell me how to get my mac to behave more 'sensibly'.
I want the window I am looking at, the only window visible on the screen, to have the focus. Always. No matter what! Which I think is entirely reasonable.

Thank you for all your points.
It can't automatically be the one you want without some instruction from you - the cmputer is not a mind reader, can not seenwhat holds your attention.
Darn!
In Windows and Linux it is automatically the last one in use before you closed the window(s) that have been closed. This is the window naturally lying topmost in the stack of windows on the screen. It is this window which is exposed in the circumstance I am describing. And it is this window which I expect to have the focus in this circumstance.
More to the point, and has been mentioned several times - unlike Windows, when you close the last window of a Mac app, the program is not quit (usually - there are exceptions). The program is still running, as is indicated by the 'running light' on the Dock (the small bluish oval underneath the app's icon in the Dock), even though it has no windows open.
It is not running with an invisible window being the focus - it has no windows at this point, not even an invisible one.
Yes, understood - naturally enough after a few hours exposure to the mac interface. And I would assume that none of the quitted windows in that app will have the focus, which would be nonsensical.
The overall 'focus' is still on that program, because it is still running (you closed its windows, but did not quit the program) and will remain so until you instruct the Mac to switch to a different program in the stack (or queue, or rotation, however you choose to consider it).
Yes. WHY?
Whether program closes when you close the last window is an interesting point. Mac do it different to the others. OK. But this program should not have the focus, unless there is something useful you can do with it. I would have thought obviously.
Why have a program quit when you close its last window? Doesn't make sense to me - can't tell you how many times that behavior with a PC has irked me. Consider this scenario - you're writing a memo to someone in TextEdit. You print the memo off. You're done with that doc, but then want to write a letter to someone. So you close the window for that file, which happens to be the last window open for TextEdit. If TextEdit should quit at that point, you'd need to restart it again before you can write the letter. But - it doesn't quit; it's still running. So instead of restarting it, all you need do after closing the memo's window is press Command-N for a new, blank doc in which you can write the letter.
I agree. This is very useful - once you are used to it. Certainly, this is an excellent option, though it seems crazy that it is not a readily settable option. Equally though, if I was going from mac to windows or linux, I would be totally peeved if this behaviour was not a settable option.
Regardless, this is the way it is in the Mac world, and has always been as far back as I can remember it (and I go back to OS 1 on a MacPlus). As far as 'industry standards' go, there are many who feel that Macs set the GUI standards a long time ago, and that those wo have imitated it have not done a good job of their implementations.
I totally take your point. And I am ready and willing to learn a new interface, naturally, though I had no idea the journey would be so extensive. [] "More ruddy stairs" says the elderly ghost of the recently deceased David Emery grumpy old git character, who hobbles along with a cane, confronted with a loooong flight of stairs up to heaven []
- elsewise I'm going to cause myself an inordinate amount of frustration when my impossible-to-meet expectations aren't met.
Of course I have impossible-to-meet expectations, I got a mac, the doyen of computers. I thought a faint mysterious hint of a sound might be present in the faint whirr of the fans at start up, like far off angelic choirs, and that everything would be easy and wonderful, as well as beautifully easy on the eye.
But I still think that the focus shoud go somewhere useful. And if it stays with the app running with no windows, then at the very least it should be one keyboard shortcut to open a window for that app, or reopen the last window of that app. Or, gasp, it should go to the last window in use before the windows of the app that just got closed, the one on top of the stack, the one straight in front of you, currently impervious to any and all keyboard strokes. And, given the price and sophisication of macs, and the significant gap between the GUI standards of the major players, however long they have respectively been in business, I think it is the kind of thing which should be settable. Indeed, confident that this was settable or 'fixable', I embarked on this thread in the first place.
EOL

PLEASE HELP!!! My 'Apple mobile device helper has stopped working'!

Today i bought the new 3G iPhone so i went online to download the new 7.7 iTunes software. Now when i go into my iTunes a Windows pop up appears telling me that my 'Apple mobile device helper has stopped working' and that it is diagnosing the problem. The thing is that it doesn't diagnose the problem, the same box just keeps popping up over and over again.
I am not very computer literate and have tried everything that i can think of but nothing has worked.
Please can someone help because i'm absolutely dying to use my new iPhone; i queued up from 6 am to get my hands on it! :0(

I'm just a simple user. I don't know how to fix it any more than any of the other posters with this problem. I've looked around in control panel, done some poking and prodding with services and processes, and can't find a reasonable way to stop the messages without completely hosing up iTunes. I know the messages are annoying as ****, and nobody likes the idea, but sitting around and doing nothing is sometimes a whole lot better then doing something that makes it worse. See if you can find a document from Apple that tells you how to go back to the previous version of iTunes. I've seen that course of action mentioned several times for previous releases of iTunes upgrades, so the instructions for it must exist in another forum.
I just think, from the number of posts, that Apple is going to have to get a fix out pretty quickly, because this error pretty much shuts down their products on the Windows platform. They can't afford to let it go on for very long.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

Mobile Device Helper has stopped working

I have just purchased an iPhone 3Gs, I have the lastest version of iTunes (9.1) and am operating on 32-bit Windows Vista using an Acer laptop.
First, the iPhone was not recognised - so re-installed iTunes, downloaded Service Pack 2 for vista, reinstalled iTunes. Did't work. Finally found a forum that lead me to delete a problem file for Acer laptops (can't remember its name now) but then my iPhone was now recognised!
Secondly, tried to sync my windows contacts (all my old contacta list from old phone) then had syncing problems..through more forums that error message stopped but now I have a new one that I can't get past...
'Mobile Device Helped has stopped working' comes up repeatedly and will not let me to anything with iTunes as it freezes until I end task in Task manager.
I have looked into other forums that talk of deleting the Apple Mobile Device, but it doesn't seem to me to be the rigt decision as the majority of people have just had to reinstall iTunes as it wont recognise the phone without the file.
It seems that the new iTunes doesn't like Windows Vista.
Please can anyone help me get past this point before I lose the will to live!! (it's been over 5hours now!!!!)
Thanks

Sort of the same issue.
Windows Vista 64bit Home Premium.
I just launched iTunes for the first time after installing 9.1. When I connected my iPhone, iTunes told me that I needed to install a newer version of Apple Mobile Device, which entailed removing/reinstalling iTunes and AMD. I remember there being an order to which applications should be removed, so I did that, but got stuck at AMD. I wasn't able to remove it. There was no error message, it just automatically rolled back the uninstall process and quit. I did some research and saw someone recommend using the Windows Install Cleanup Utility. I used that to remove AMD, and it worked. Next on the list was Apple Application Support (?), which also could not be uninstalled by normal means. So I used WIC on that as well. iTunes, Bonjour, Quicktime, and Apple Software update I was able to remove via the Control Panel. I rebooted, reinstalled iTunes, and when it began the install process for AMD I got this message:
"Could not open key:
Unknown\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\3F55235DF871F046A8F862841205 6EF. Verify that you have sufficient access to that key, or contact your support personnel."
Got the same message for Apple Application Support. As a result, neither was installed.
Prior to doing any of this, I had disabled AMD in Services, which didn't help. I have since re-enabled it, and it is still running in Services, although it does not show up in the list on programs to uninstall.
After all this, I read in another forum that simply doing a Repair on AMD would solve the problem, but since I am unable to reinstall it, I cannot test it out.
Message was edited by: Zachary Prewitt

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

Why do I get an error message when I try to sync my IPAD with ITunes? Message reads Cannot be used because Apple Mobile Device Service has not been started.

AMDS for Windows
http://support.apple.com/kb/TS1567

Windows 10 mobile build 10149 has dropped. Who is testing it out

Similar Messages

Maybe you are looking for