Windows 10 no Internet connection

I updated my dell xps8700 from 8.1 to 10I can connect with the infinity router OK but cant get on the internet.triedresetting the routerupdating the device driversstartin with only microsoft appsother devices can use the router to access the net and the problem PC was fine before the upgrade.

I just updated my Dell XPS to windows 10 from 8.1.Now I cannot connect to the internet.The system can see the Infinity router but shows limited connectivity. There is a receive and transmit character count.Onther devices connect fine.I have tried powerind down the router several times without success.I have tried updating the device drivers ( there is no ! next to the wan device on the device manager )I have tried a clean start with all non microsoft programs disabled.Is there some magic spell required.

Similar Messages

Windows 7 and internet connection issue

I am having a problem connecting to internet on Windows 7 OS. I have a Macbook that installed Windows 7 on Bootcamp. When I connect the DSL wire to my computer in dormitory it connects automatically. But when I go to somewhere else it doesn't connect. I also tried to connect using IP address which consists of 4-5 rows of numbers. Unfortunately, I cannot find the tab where I can enter these IP address numbers. So I was wondering if there is something wrong with my Network Driver (or may be it is missing some networking drivers).
The main reason I want to connect to the Internet in Windows system is because I need to activate Keyshot (which requires internet connection and it works only on windows platform). My teacher said if the IP system is different on the Windows installed Macintosh, then it may not activate the product. So I was wondering if my Windows networking system works differently from Windows system on normal PC. If so how to fix this connection problem. Sorry if my question is too complicated.
But again, I am able to connect on my windows at home. But this connection is still not allowing me to activate the software. As I understood, this program requires normal internet connection of Windows. I don't know what is wrong with my computer.

Thanks for the direction. Did you mention the Bootcamp forum within this Apple.com or are you talking about a forum that exists outside of apple.com (maybe some website solely devoted to Bootcamp or windows issues)?

Failing to install Domain Services on a Windows 2012R2 without internet connection

Hello
i have a windows 2012r2 server without internet connection.
when i try to add the Domain Services role it failed in the Feature installation phase
i even tried to provide an alternate location from a ISO source but that didn't help either
im lost here what should i do?
i attached the fail screenshot
Thanks
Guy

What error is shown in Event Viewer when the install fails?
Is it the first 2012 R2 DC in a lower level domain?
Try installing ADDS via PowerShell:
Import-Module ServerManager
Install-windowsfeature -name AD-Domain-Services –IncludeManagementTools
The other thing that it could be is an issue with the WID (Windows Internal Database)
Check in the Event Viewer for anything to do with Service: MSSQL$MICROSOFT##WID and perhaps try this:
Adjust your domain (or domain controller if appropriate) security policy to allow “NT SERVICE\MSSQL$MICROSOFT##WID” to log on as a service, a GPO setting that can be found under Computer Configuration > Policies > Windows Settings > Security Settings
> Local Policies > User Rights Assignment.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Urgent : Help, window and mac internet connection...

I'm using a iBook G4 to connect to internet using wi-fi.
Then i connect it to my Mac Pro using just a LAN cable to share internet connection.
Now the problem is, when i re-boot to window, how do i get my internet connection from my iBook?

The connection settings should be exactly the same as under Mac OS X.

Windows 7 Update Internet Connection Issue with Router

I updated two of four toshiba laptops with Windows 7 and installed Toshiba's wireless adapter driver for Windows 7. The adapter connects to the router and I can access all resources on my home network, however, Internet service is not available on the two laptops with the Windows 7 update. After disconnecting and reconnecting 7-10 times, the Internet Service connection does not drop. The other two laptops and two desktops that are not running Windows 7 do not have this problem. Is there any known issues with lynksys wireless routers and Windows 7?

When your Windows 7 machine is having problems, can it ping the following IP addresses:
127.0.0.1 (local loopback)
192.168.1.x - the DHCP IP address it was issued by the router
192.168.1.254 - your router
8.8.8.8 - Google DNS out on the internet
-- Dan Meyer
http://www.linkedin.com/in/danielrmeyer

Using bootcamp and windows 7 no internet connection - how to solve the problem ?

If anyone has ideas on how to get internet working it would be a great help. I'm running windows 7 in bootcamp mode and it says I have no available wireless connections. Yet when running in iMac mode Safari works fine?

When you created the bootcamp partition it should have required to you to burn downloads from apple to a disk or usb. I had the same problem until I put that disk in and installed it.

Can't play HD movies purchased from iTunes on Windows 7 without Internet connection

Purchased (not rented) Wreck-It-Ralph from iTunes and downloaded it to my local drive. I confirmed that the file is, in fact, in a local directory. However, when I pull up the move's details iTunes it states that the file is in iCloud. (Library > Movies > R-click movie icon > Get info > Summary tab > "Where iCloud".) Every time I try to play the movie, either by playing it from iTunes or by going to the file itself and opening it via iTunes, it won't play unless I'm connected to the Internet. And even then, there's still a long pause before playback actually begins. It almost looks like it's trying to buffer it.
If the movie file is taking up 3gigs of space on my computer (that's authorized to play content from iTunes), I expect to be able to take this video on the road.

You need to authorize your computer to play your
husband's songs, by putting in his iTunes account
info on your computer, (Not your computer's
password.) meaning his login and password of his
iTunes account.
http://docs.info.apple.com/article.html?artnum=93014
He used my account to purchase the song.
If you did enter his iTunes account information and
the song still not playing it could because the
iTunes store is down for upgrading,
http://www.macworld.com/news/2006/09/12/showtime/index
.php so maybe the info didn't go through at this
time.
PowerBook G4
1.67GHz Mac OS X (10.4.3)
That may be the problem - thanks!
Kittenmommy.

Update downloads fail, initial app installs work fine, Windows 8.1, internet connection and firewall settings fine

I just installed the CS6/CC applications I use without any issue. I then was prompted to install various updates. All the updates failed and the message says the downloads failed. I checked my internet and firewall settings and they are fine. I the was able to install a different CC application I hadn't installed before. That process worked fine so I retried all the updates. They all failed again and for the same reason. I have even tried a cold system reboot. Nothing works. I am really baffled.
Has anyone run into this and, if so, were you able to figure it out.

pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

Windows Action Center says 'Connect to the internet or try again later' when I have a working internet connection

I'm running on Windows 8.1 pro version and I've had this problem since I upgrated to Windows 8. I also have problems with Windows Update getting stuck on preparing to install or downloading updates but it shows the size of updates as 0 kb and progress stays
at 0%. I usually have to reboot and then run Windows Update again to get it to work. Sometimes it also asks if I want to resume download since it thinks I'm on a metered connection.
I use a 3G usb dongle for my internet connection, but I also have manually setup a local network on my NIC (which does not have a gateway set) to connect to my backup server. If I remove the 3G usb dongle and set a gateway for the NIC (I currently also have
dsl landline which is used by other computers on the network) Windows update works without problems. I have the Windows settings enabled to download over metered connections so that should not be the problem.
Is there maybe a problem how Windows handles the internet connection using a USB dongle when you have a local network setup, or is there something else I might have missed? I did not have this problem when I was still running on Windows 7.

only windows update, action center that seem to have these problems.
Reminiscent of the same symptoms as a dial-up user. Then, one way that I could use Help & Support (in XP) was by setting Never dial in the connection and making sure that Support via H&S was the
first request I tried after connecting. Otherwise it seemed that those applications thought they could expect LAN speed performance which was obviously not the case. I have been surprised how relatively
few similar incidents there have been with PPPoE because it could have the same problem, just on a faster circuit and so lower probability of it happening.
You could try tracing with a TCP packet tracer such as NetMon to see what the timings are in each case. Unfortunately I think that the ability to tune away timeout symptoms is still very lacking in W8. Do you know what all your dongle has to
do to set up a circuit? One difference between W7 and W8 is greater use of IPv6. So you could try disabling that support to see if your symptoms changed.
Good luck
Robert Aldwinckle
Checked the properties for the usb dongle and it doesn't have ipv6 on the protocol list at all. Can't really say looking at netmon if there is problem with timings, atleast with my level of expertise. Might try to install Windows on VM on this to see if it
has same kind of behavior since it will use the same internet connection.

Periodically lose virtual machine (Parallels) internet connection on windows 7

Running OS X Mavericks 10.9.5
Parallels 9.0.24172 running Windows 7 enterprise
Internet connection would periodically time out, and force a reboot of the virtual machine to regain connection.
Using a wired connection.

Changing the network configuration settings for the virtual machine from "Shared connection" to "Ethernet" (for my specific connection) solved this problem. It seems there is an issue with the shared connection feature for Parallels and OS X.
At the Parallels virtual machine selection:
1. Right click on the virtual machine
2. Select Configure
3. Choose the Hardware tab
4. Select Network or Network '#'
5. Change the network Type
6. Choose your preferred type
     Ex. If you are using a WiFi connection select WiFi.
     (You may have to re-enter the SSID and Password to your router/network for the virtual machine).
     In this selection window : Using "Shared connection" is what caused the connectivity problems for my computer.

How to maintain a dial up internet connection?

I have a mac mini and a simple dial up connection. Lately I've been getting a prompt on my computer to 'stay connected', or 'disconnect'. Since I'm new to mac I can't seem to find any configuration in the preferences window of the "internet connect" that will ensure an uninterupted connection. Can anyone tell me where to look in system preferences that will solve the problem for me? This only began a few weeks ago when I moved the computer from one room to another. I used to have an application that began the internet connection upon login to my computer.
Hamiltonmike

Hi. Give this a try. Open your System Preferneces and then click the Network settings. Under the "Show" pop-up menu select Internal Modem, then click the "PPP" tab. Now select "PPP Options..." and under "Session Options:" un-check the option "Disconnect if idle for...". Assuming this was checked in the first place, unchecking it should keep you connected now and get rid of the connection message that's been nagging you.
Hope that does it, but post back if it doesn't or if anything in the above is unclear.
PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42 Mac OS X (10.4.5)

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently

After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
,but that is not helping.kindly provide me the guidance.
when i searched in internet i am able to see many people are struggling with this same issue .

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

Setting up a new TC. Everything went fine. I was able to connect a macbook air, 2 ipads, an Iphone 6, and even a windows 7 PC. All devices showed a complete and functioning internet connection, but none of the devices could access the internet.

I am trying to set up internet connection to my home using a 3gig Airport time capsule as a router. I unplugged the cable from the existing router, and plugged it into the ethernet port of the TC. The TC fired up found tttttttthe internet connection, and glowed green. I set up the password, and all, and was then able to connect a Windows 7 PC, 2 ipads, and iphone 6, and a macbbook air, all running the most current os. All devices connect with the internet via the Airport device. they all say that there is a fully functioning internet connection, but none of them can actually connect to the internet. When I run a speed test via OKLA I am told that the test failed to innatiate.When I try to do a search I get an error message that the page cannot open because safari cannot make a secure connection to the server.
Any suggestions?

Inside the house I have what looks like a phone cable that is plugged into a power supply, and into a router.
What is this router?? Is it the TC or a router supplied by the ISP?
It will depend on how the system works.. but the instructions from skybeam are fairly simple.. you just setup a router with dhcp set on the WAN port for connection.
On the airport utility open your TC by clicking it then clicking edit.
Make sure the WAN is set correctly and the ISP ethernet cable is plugged into it.
And make sure Network is set to DHCP and NAT.
Please give me the screenshots of the same things from your setup.

Loss of internet connectivity after upgrading to windows 8.1

Hi, After upgrading to windows 8.1 from windows 8 i am experiencing major problems , loss of internet connectivity for no reason both I.E. and G/CHROME are now taking an age to open there are no virus issues as far as i can see.
I have uninstalled and re-installed windows 8.1 about four times over the past 9 months or so and the same thing happens after all the updates are in it runs like a dream for say 6weeks or so then i get the same faults as described above then i uninstall/ re-install ok for 6 weeks .
I would apprieate any help or advice thanks

Hi @BMATH
Thank you your query.
I understand that after updating to Windows 8.1 about every 6 weeks you loose wireless connectivity for no reason and the web pages are very slow to open. If you uninstall and reinstall Windows 8.1 it works fine again for about the same amount of time. You have done this about 4 times with the same result each time.
Do you know if there is any changes at that time , perhaps an update?
You stated you do not believe you have any viruses. Just to be sure here are two links that will help confirm that.
Microsoft Malicious Software Removal Tool
Microsoft Safety Scanner
After updating to Windows 8.1 have you checked for Windows updates?
Have you ran HP Support Assistant ?
Here is a link to Troubleshooting Wireless Network and Internet (Windows 8) that may also help.
If the issue should remain please contact HP support for assistance.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

New iMac running lion 10.7.2...partitioned drive for windows xp pro ...successfully installed...up and running(duel boot) but no internet connection on windows side...need drivers?.....please help

new imac running lion 10.7.2 partitioned HD for duel boot and successfully installed windows xp pro (sp2)....have internet through eithernet cable on the mac side but no internet connection on the windows side....need drivers???? please help

I too am running xp spiii on my mac with lion. However I installed xp while running snow leopard then upgraded to lion and both are running fine. If you have the support disc that came with the imac all the relevant drivers are on there. The only other thing i would suggest is that you get spiii and upgrade to that.
Hope that helps

Windows 10 no Internet connection

Similar Messages

Maybe you are looking for