Windows 10 preview, problem logging in

I can't log into my Yosemite server from a VirtualBox machine running Windows10 (why? it's free). It logged in fine with Snow Leopard server, but when I upgraded I can no longer log in. The fix for Window 7 or 8 doesn't work. Any ideas?

Hi,
Is there any error message when these app open failed? Under this situation, it would be better to create a new account to test if it is user profile problem.
In addition, you can try to use sfc /scannow command to fix system componments for test. If no use, using
DISM /Online /Cleanup-Image /RestoreHealth instead.
Roger Lu
TechNet Community Support

Similar Messages

Preview and logging window in FCE 4.0 HD

Hi Everyone,
Just a quick question:
I'm learning FCE from the Diana Weynand book at the moment.
My problem is I don't see the Preview and Logging windows when I am capturing from my Canon XH A1s.
I'm using FCE 4.0 HD.
SL 10.6.8
Canon XH A1s
2008 24" iMac.
Thanks in advance.
Michael.

When capturing HDV with FCE you will only have a simplified capture window and clips will be broken at the shot changes after capture.
This is normal.
Capturing DV will give you the Capture window with more features.
Al

Windows 10 technical preview problem with lumia 730, wifi is not working and how to rollback to windows 8.1 please help

I installed windows 10 technical preview on my lumia 730 and now iam facing problem
1) unable to connect wifi
so please help me how to roll back to windows 8.1
in the forums it was written that if u have windows recovery tool then it is possible , but iam not able to find windows recovery tool.
Please help me my mail id [email protected]

so please help me how to roll back to windows 8.1
http://windows.microsoft.com/en-us/windows/preview-backup-restore

Problem logging off windows 7 on AD domain - Sound Card issue New model iMac 2011

I am looking for help for a strange problem we have on our new 21.5inch iMac computers (mid-2011 model), Our whole IT team have worked for a week to find solutions and we have exhausted all of our ideas. Please note we have an identical setup on our old mid-2010 model iMacs, which experience NONE of the same problems, windows logon and log offs are quick and painless. We have conducted side by side identical tests, so this forces us to assume it is a hardware/driver issue.
Basically our iMacs have BootCamp installed with Windows 7 Professional, Windows 7 is our default operating system. We have joined these computers to our Active Directory Domain and the users are all roaming with redirected folders.
The issue is the following: When a domain user logs off, it can take up to 25 minutes for the User Profile Session to finally log off and return to the normal Ctrl-Alt-Del menu, the next user who logs on usually is just left hanging and with no ability to logon. After a hard-restart the system logs on normally, but then can experience same problems at logoff.
We see the issue when the user watches lots of Flash Player videos on a browser such as Firefox and Chrome, although we've seen the same problem when other applications are used on the computer such as Windows Live Movie Maker.
So far we have found only one solution: If we disable the Cirrus Logic Audio Driver CS4206A (AB 9), and High Definition Audio Driver from the Sound, Video and Game Controllers within Device Manager and restart the computer, the system behaves normally, logon and log off times are a few seconds. But naturally we have no sound which is unacceptable.
We have tried everything we can think of including: Fresh installs of both OS, full updates of OS's, Firmware and Software, Manually updating sound drivers, changing users and AD Domains and attempts to force stop all services on logout etc.
We would appreciate any and all help to get to the bottom of this, including advice on what to try next.
Regards,
IT Project Manager
Tumo Project
www.tumo.org

Just wanted to feedback on this and say our solution was the following:
Download and installed Universal Driver Pack within Win 7 , which included a AMD High Definition Audio Driver and replaced the High Definition Audio Driver Installed.
I have also informed Apple and Microsoft of this issue, hopefully someone will take some notice and update the driver.
-TumoAdmin

Problem logging into essbase studio in windows 7 -64bit-

hi everyone
I have a problem logging into Essbase studio as i have installed Essbase foundation 11.1.3 and Essbase server in windows 7 "64bit" version
when ever i try to log into Essbase studio it gives me this error
Error connecting to Essbase server studio
Reason
Network Error
Network Communication with the server failed
connection refused
as in the following pic
[http://www.4shared.com/photo/dDPU68B5/errr.html]
I hope you can help me with that problem.
Thanks in advance..

Hi,
I dont think Windows 7 is supported OS.
Go through the support matrix,
http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
Having said that, there are ppl who have installtion done on Windows 7 as well.
I would say, check the services first if they are up and running or not. If yes, then logs should be the first place to visit.

HT1386 I sync all songs, photos and videos between my computer and iPod classic with no problems, but when I get to sync info I get this message: "iTunes cannot sync Calendar and contacts to iPod. Try logging out of Windows adn then logging back in".

I sync all songs, photos and videos between my computer and iPod classic with no problems, but when I get to sync info I get this message: "iTunes cannot sync Calendar and contacts to iPod. Try logging out of Windows adn then logging back in". Could you please help?

Correct. When you update via iTunes all synced media that is not in your iTunes library will be lost.
As IO said before:
You can redownload most iTunes pruchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
I do not think it included audio books.

Preview problems, Premiere CS5 Windows

Hi!
I´ve been using Premiere for 10 years, so I should know it pretty well, but this is my case:
I start Premiere, choose "New project", tried different sequence settings, but the DVCPro HD 25 (PAL) is the most relevant. Inside Premiere, I import a clip, and drag it onto the timeline. So far, everything´s normal. The problems starts when I press the space button for preview. The only thing´s happening is the play symbol changes to a stop symbol in the composition window. No timecode´s running, no moving marker, and only a still image in the composition window. I can jog it frame by frame, and I can move the marker, and everything is fine, but also no playback. The play button in comp window does not make a change.
My next problem is to get this version to work with my Black Magic Decklink Extreme. I have an output signal, but no picture.
My system:
Pentium i7
12GB RAM
Win 7
Anybody?
Erik
Norway

Thanks, but I´ve found a problem with my Decklink Extreme PCI card. The Premiere preview problem happens only when I´m using any Black Magic presets. Is Decklink Extreme PCI/windows 7/Adobe CS5 a bad combination? I´m not able to get any picture on my monitor from the decklink what so ever (composite/component), but there´s a signal there (black video). Worked fine in XP (with CS3), kind of worked in win7 with my old configuration (4GB RAM, single core AMD-processor), and absolutely no response now.

Active Directory accounts problem logging in to Mavericks

We have twenty iMacs in a lab and five in an Internet café, all wired to a multiple subnet network. OS X Mavericks is bound to Active Directory. Frequently OS X Mavericks behaves as if the network user account password is entered incorrectly until the iMac is restarted. This did not happen when we had Mountain Lion. We never have problems logging in to Windows computers bound to Active Directory.

We have twenty iMacs in a lab and five in an Internet café, all wired to a multiple subnet network. OS X Mavericks is bound to Active Directory. Frequently OS X Mavericks behaves as if the network user account password is entered incorrectly until the iMac is restarted. This did not happen when we had Mountain Lion. We never have problems logging in to Windows computers bound to Active Directory.

Error: There was a problem logging on to SAP BusinessObjects Enterprise

I am trying to use Crystal Reports Enterprise XI 4.0 with BusinessObjects Enterprise 4.0 using a Bex Query on an SAP NetWeaver 7.01 SPS 9 BW system. I have been using the SAP Press book u201CIntegrating SAP BusinessObjects BI Platform 4.x with SAP NetWeaveru201D as my guide, attempting to follow it step by step. Please bear with me as I have only started working with this set of products within the last month. (Very new at this and do not have a very good grounding of the way it all works together. Trying to learn as quickly as possible as I am expected to support this set of tools for our developers / users.)
I have been trying to follow along with the book to get everything connected. At this point, I have BOE set up to attach to the SAP NetWeaver BW system. I have created a test Bex Query on the BW system. From within BOE, using CMC, I can configure the Bex Query as an OLAP connection. I have set it up for SSO. I have also exchanged certificates between the BOE and the SAP NetWeaver systems which I believe will allow the exchange of tokens.
I then go into Crystal Reports for Enterprise XI 4.0 on my PC. (I am running Windows 7 64-bit on the PC. I installed the BOE 4.0 suite of client tools except for SAP BO Live Office and SAP BO Analysis for MS Office). I can attach to my BOE system and can browse to see the OLAP connections in the BOE. I then try to select one as the data source for a new report. I then get a pop-up window stating:
   Unable to Logon
     There was a problem logging on to SAP BusinessObjects Enterprise.
       Please check your logon credentials and make sure your network is properly configured before trying again. If the problem
       persists please contact your Administrator.
I cannot find a log / trace / error file on my PC, the BOE system or the BW system to indicate any additional information as to what the root problem is. Has anyone seen a similar error and might know where I can find more information, how to increase trace levels so that I get some additional information or provide hints as to what the root problem might be?
I am also trying to figure out how the authentication works between the PC, BOE and SAP NetWeaver. If using a token, there has to be consistency with the username (or some value) and I am not certain that is happening. Right now, my BOE sources its UME from the SAP NetWeaver BW system. So its user accounts are in the form SID123/ACCOUNT where SID is the SID of the SAP NetWeaver system and the string u201C123u201D is the client on that SID. When I log into the BOE system from within Crystal Reports, I am using the account in that format whereas the account on the SAP NetWeaver BW system in actuality is only the string ACCOUNT. So is the token stripping the string u201CSID123/u201D from the account name when it is sent so that the accounts match? Or do I have to manually configure some kind of account alias (in the BOE system?) so that the two recognize each other? Or something else?
Any hints or ideas around where I can find additional information or where I have gone wrong, would be greatly appreciated.
Thank-you in advance,
Deb Nugent.

Henry,
Many thanks and excellent suggestions. But I am still not able to get this to work and (once again) am stuck.
RE: Server Connections: When I check my server connection, I have not ticked SSL and am using the non-secure server port for my BOE system. When I click on u201CTest connectionu201D, I can successfully log in using my username / password on the SAP NetWeaver BW system. If I tick the SSL box without changing the port, I get the error message u201CFailed to establish a connection. The cause was u201CCannot connect to SAP BusinessObjects Enterprise at this time. Please try again later.u201D If I tick the SSL box and change the port to use the secure server port for the BOE system, I get the same error.
RE: Preferences: I am using the default settings under Preferences -> Network Settings. We do not manually configure proxy settings on our network so I have ticked u201CUse system proxy configurationu201D and under SSL settings, have ticked u201CUse system keystore / trust storeu201D. I have swapped keys between the BOE system and the SAP NetWeaver system but I have not swapped any keys between my PC and the BOE system or the SAP NetWeaver system (which I do not expect to do but am mentioning here in case I am wrong).
RE: BILaunchPad: I do not have any references for BILaunchPad. Is this u201CWeb Intelligence Rich Clientu201D? If so, I tried starting it, it reported an error: u201CAn error occurred at session creation.u201D Details showed u201CSSL mode is being requested but the following argument(s) are not present: passphrase (FWM 01012)u201D I went into the CMC and checked my SAP connections under Authentications. On the tab u201COptionsu201D, there is the section u201CSAP SSO Serviceu201D where I typed in the KeyStore password. When I created the key store file, I only specified a keystore password and did not specify a private key. Originally, I had it set with the private key blank with the correct password on the keystore. I also tried entering the same password as the private keystore and saving it. I verified that the connection services for Web Intelligence had restarted but I still am getting that same message when I try to start the Web Intelligence Rich Client.
At OS level on the BOE server, I logged in as my boe1 account and checked the parameters that can be entered for the PKCS12Tool.jar file that I used to create the ketstore file I had used. There does not appear to be an option for anything other than the keystore password. There is no private key password field listed.
I searched for the FWM 01012 error and found the HTML and PDF help files form SAP explaining errors. However, it only states u201CEnsure that all SSL arguments are presentu201D but gives no details as to what, exactly needs to be checked.
I will be talking with co-workers today to see if any of them can make sense of this (anoterh set of eyes sometimes helps). Any other suggestions about areas to look for addiitonal details / increased traces / logs?
Deb Nugent.

Hi, so I keep having problems logging onto the iTunes store in iTunes and I get this error message: "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80090318) Make sure your network connection is active and try again."

Hi,
So I keep having problems logging onto the iTunes store in iTunes where an error message pops up saying: "iTunes could not connect to the iTunes Store. An unknown error occurred (0x80090318) Make sure your network connection is active and try again."
How do I fix this?

Hey thatssoivi,
If you are having an issue with being unable to connect to the iTunes store, I would suggest that you troubleshoot using the steps in this article -
iTunes for Windows: iTunes Store connection troubleshooting - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Preview Problem: PDF file:Adobe livecycle designer ES 10.0

Hallo.
How do I fix preview problem of a .pdf file that was created with Adobe livecycle designer es 10.0. version 1.7 ( show on the properties of the file). The file opens normally. No preview in explorer preview pane and change to printing problem too. Need to preview the file before uploading it onto the internet. All updates done: Windows 7, Explorer 11, Java (Javascript enable) Adobe reader XI. and Adobe Reader XI Pro.(Trail version). When in Explorer and using open with:Default program: select software already in stalled on computer: Browse Adobe reader XI (Acrord32.exe: properties show version 11.0.06.70) This will show as Adobe reader 9.4 on the list of programs.

If you purchased a prior license of Acrobat and have purchased an upgrade to Acrobat XI Pro then you are eligible for free LiveCycle Designer upgrade.
See more information on: http://www.adobe.com/products/acrobatpro/faq.edu.html
Visit the http://www.adobe.com/go/learn_acr_livecycle_upgrade_en to request an upgrade.

Problem Logging into only one of many computers

1. I have two desktop computers. One is hard wired to a linksys router and works great. The other desktop that has a problem logging into my email account. See (5) below. 2. First you must know that I also have an apple mac that is connected via the Router and it also works fine running OSX. 3. I have a Dell Laptop running Vista connected via the Router that runs fine. 4. Have another Dell Laptop running Win 7 is connected via the Router that runs fine. 5. I have this desktop running Win XP pro that is my problem. This is how the problem goes: I get to what appears to the correct login page; Type in the correct user and PW info; execute by clicking on the correct button; Nothing happens; I try several other ways; I click on the "signin" box at the extreme top right and nothing happens; I click on another box that ask for my location and a new window appears asking for my addres and zip code. I eventually get to the email. Now at this moment I look at the top of this my current window and I see that my location is shown and I am signed into verizon to write to you. There is a block that reads "signout". What is going on?

And one more small detail. After I have this problem there's a crash file in ~Library/Preferences called 'com.apple.iLifeAssetManagement.crqash.plist'. It's cryptic, but it says:
bplist00“_AssetManagmentCrashDetailsKey_AssetManagmentCrashCheckerKey°’
_&AssetManagementAgentProcessInfoDateKey_3AssetManagementAgentProcessInfoProcess IdentifierKey_0AssetManagementAgentProcessInfoSupportsDeleteKey_7AssetManagement AgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAgentProcessInfoExecuta blePathKey3A∑Ëô¿U∞y— _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStreamAge nt.app/Contents/MacOS/PhotoStreamAgent÷_&AssetManagementAgentProcessInfoDateKey_ 3AssetManagementAgentProcessInfoProcessIdentifierKey_0AssetManagementAgentProces sInfoSupportsDeleteKey_<AssetManagementAgentProcessInfoSupportsSharedStreamsVide oKey_7AssetManagementAgentProcessInfoSupportsSharedStreamsKey_0AssetManagementAg entProcessInfoExecutablePathKey3A∏Ü“@Ôx î _i/Applications/iPhoto.app/Contents/Library/LoginItems/PhotoStre amAgent.app/Contents/MacOS/PhotoStreamAgent
π

Problems logging in to my iTunes wish list

I have been having problems logging in to my iTunes wish list, and other sections of iTunes. I keep getting a log-in window and those attempts never work. It appears that it is doing something and then just cycles back to the log in pop-up. Pages also do not load completely missing artist's additonal albums, songs, or does not load at all. iTunes Radio will not work either. I re-installed iTunes, and turned off my firewall. I tried many different remedies that these forums have recommended, but none have worked so far. Anyone else have this issue recently? The previous update to iTunes did not fix the problem either. Thanks in advance to anyone with a remedy.

The multiple dots is a simplistic attempt to hide, from someone looking over your shoulder, the number of characters in the password.
Just eneter your password and ignore what appears in the password field. If it still does not let you in then yo entered an incorrect password.
In that case reset to defaults, which you appear to know how to do, and write down the new password when you are prompted for it.

Problems logging on with microsoft?profile.languag...

I am having problems logging onto my microsoft account I open skype like normal when I try logging on it brings me to the default log on page and on tops it says. "Sorry, something went wrong. Please try again," well i did and nothing i uninstalled and reinstalled skype and nothing. Please help and thank you in advance

Try to delete the shared.xml file used by Skype.
Exit Skype : From the system tray >> right click on the skype icon and click Quit
Press WinKey + R to open the Run window
WinKey (the button is located between the left Ctrl and Alt with the Windows logo)
type: %appdata%\skype and press Enter
Delete the shared.xml file.
Restart Skype.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

LocalDrive, remoteDrive error being logged to Windows Application event log

Post Author: yday
CA Forum: Data Integration
Hi all,We are finding the following error messages being constantly logged to the Windows application event log:Event ID: 4096Source: Data Integrator"The error: localDrive: LocalDrive1; localDriveValue: "andEvent ID: 4096
Source: Data Integrator
"The error: remoteDrive: RemoteDrive1; remoteDriveValue: "Another user noted as having the same problem in the old BO Support Forum:http://support.businessobjects.com/forums/message.asp?fid=568&mid=171195 We are also running Data Quality XI R2 (11.5.1.0) on the same server. This problem has been happening for as long as I can remember. It does not appear to cause any jobs to fail, but we would like to resolve this to prevent error messages being logged to computer management. Can anyone suggest a solution? Product: Data Integrator XI R2
Version: 11.7.0.0
Patches Applied: None
Operating System(s): Windows Server 2003 w SP1
Database(s): Oracle 10gR2
Error Messages: remoteDrive, localDrive error (as above)Steps to Reproduce: Restart the job server and the error appearsThanks and regards,York DAY

Post Author: yday
CA Forum: Data Integration
Ben,
I have just installed DI 11.7.2.0 and it is still an issue! The bug has not been listed in the release notes in either the resolved issues section, or the known issues section.
Australia support told me it would be fixed in the next service release. This was well before 11.7.2.0 was released.
I've opened another support case as I closed the last one, believing it was resolved. From our perspective, it is not even being shown as a known issue with the product at this stage - so I will be keeping my support issue open this time until I see it is fixed.
My support case number is 302810798 FYI.
Rgds,York

Windows 10 preview, problem logging in

Similar Messages

Maybe you are looking for