Windows 10 Printer Issues

I have upgraded my laptop to Windows 10 64 bit. The new operating system is not recognizing any printers that I have (CP3505n and P2015). Will drivers be made available? I know they're older printers, but they work fine.

Hi,The driver for your printer available from Windows Update. Follow the following doucment to get the printer installed on Windows 10:http://support.hp.com/us-en/document/c01796879 Please let me know of any problem,Shlomi

Similar Messages

Yet another Windows Printing Issue

I've searched the net and these forums all afternoon trying to resolve my printing issues. I've followed all the common links posted by people who are tired of explaining the solutions to no avail. I do have the Gutenprint 5.1.3 driver installed. It doesn't list the 2100TN, but lists the 2100.
Gear:
Windows 2003 Server
HP LaserJet 2100TN Printer attached shared through Win2k computer on the local network.
PowerBook G4 (wireless)
I've been successful printing in the past with this equipment. I'm not sure what happened, except I do remember resetting the print services on my Mac a while ago. That wiped out all my printers. That must have been because I lost print capabilities to the LaserJet.
Any help is appreciated. This is a work environment and I need to print with my Mac fonts.

Greg
Thank you for trying to help. The work environment is a Windows 2003 Server, about 10 Windows 2k computers on a single domain. The HP printer is connected via the printer port on a Reception desk computer and shared as 2100TN. Let's call this computer Shubunkin. Shubunkin shares the printer to all on the network, including (hopefully) my Powerbook G4, which is connected via a wireless router. The G4 accesses the network folders via Samba - smb. The IP address of Shubunkin is in the same subnet as the other computers.
Long story short, I have spent many hours trying to figure this out on multiple occasions. The last time I was connected was by a $100/hr tech that helped sort out some networking issues we were having after a move. At the end of the day, I asked him if he could take a look at my Mac and get the printer working. It took all of 10 min., but I'm not even sure he knew how he did it. He's a Windows tech. I do remember the printer showing up somewhere in the printer browser (AppleTalk maybe) on my Mac and choosing it. It was late and back last October.
I want to be concise; I'm just not sure what information you all need to help. I do appreciate any efforts!!

DESIGN2003 css and tableview Printing window.print()

When I print a page rendered using basic TABLEVIEW htmlb tags, I was disappointed to see that output looks a bit ugly.
The table header row and data rows do not have a separating lines as the data rows have.
The online view is ok since the header is shaded differently. But when printing black on white you dont see the header and data row separation.
Did I miss something, or is the default style sheet not
catering well to printing.
Has someone modified the standard css design2003 to print
differently ?
Is there a simple solution to this output window.print()
issue.
regards
Phil.

Thanks Max,
I was unaware of this feature.
It is locked down at the customer Im at anyway.
But good to know for next time.
I was hoping SAP may have, or someone else may have,
altered the CSS to print differently.
Ie with a table frame rather than rely on shading which
still may be interpreted as white by some black and white printers. I know grey scaling is good on many new printers.
I also expected that exactly this issue had been addressed by just about all uses of tableview before me.
Im surprised that there seems to be no "nice" solution.
Is everyone else happy with the way tableviews print ?
What are you all doing to make print output look good?
Cheers
Phil.

Printing Issues with HP OfficeJet 100 and Windows 8.1

We use HP OfficeJet 100 mobile printers and have a printing issue.When we print the printer acts as if it is going to print and then prints one blank page.Printer will not print even though it is showing as default printer.Printer will just stop printing in the middle of a document, even in the middle of printing out a page. We are printing via the USB cableWe are using Windows 8.1We are connecting to laptopsWe have been using the HP mobile range of printers since 2004 and have only experienced these issues since we moved the laptops onto Windows 8/8.1 We have:Uninstalled and reinstalled the printer drivers – this fixed this issue for a short while and then it reappeared againCalled HP support and they directed us to the driver support page which had the latest print drivers, uninstalled and reinstalled drivers with them on the phone. This initially fixed the problem and then it returned a few days laterAfter trawling the support forums found directions to change the print processor to “WinPrint” – No effect as the processor was already on this settingDownloaded the HP diagnostic tool – HP Print and Scan Doctor – didn’t fix anything Any further help would be much appreciated.

Hello there Lawrence, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about the troubles you are running into when you attempt to install your OJ 6100 printer on your Windows 8.1 laptop. I read all of your attempts and seen you have tried several methods to try and get the installation to complete successfully.
I would like to make some suggestions that may help. Let me know how it goes!
1. Check that Internet Explorer pop-up blockers are turned off before downloading the installer
Internet Explorer Pop-up Blocker: How do I turn off Pop-up Blocker?
Try to install
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning".
How to disable realtime scans
Try the install
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Try the install
Enjoy your Monday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Windows Server 2012 R2 print issues

We are using terminal server with Windows Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0. We are using network printers.
There is problem with printing from Adobe Reader. We are using Adobe Reader 11.0.06. Sometimes users cannot print from Adobe Reader with error message "Printer not found" even though we can print on same printer from other software. This problem can be solved by relogging user, but in our enterprise environment, this is not acceptable solution.
Thanks for your help.

I had the same issue with another Canon UFRII that was not on the network. Canon has some monitor software that attempts to query the device and this threw back Invalid Parameter when the device did not exist. Is your device on the network?
Failed for get value IrregularPaper for printer . Error code 87(ERROR_INVALID_PARAMETER)
     InternalGetPrinterDataFromPort
3328
4984       0
0
LOCALSPL_TRACE
Failed for get value udpEnable for printer . Error code 87(ERROR_INVALID_PARAMETER)
Can you use one of the UFR drivers Canon included with the operating system?
Canon UFR II Color Class Driver
Canon UFR II B/W Class Driver
Alan Morris Windows Printing Team

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Windows 7 and Bonjour--Printer issue--Need Help ASAP, Please!

Okay, add my name to the growing list of people with Windows 7 issues. (Actually, add my wife's name. I have a Mac, and I'm glad I do.)
Anyway--she has a new HP laptop with Windows 7 preloaded. We use Airport Express as a wireless router for our 5 year old HP PSC 1350 all in one printer, requiring the use of Bonjour 1.0.6 on her new laptop to print wirelessly. Except it is only printing about 2/3's of a page and quitting. This also fouls up the printing que, meaning nothing else will print on her unit. (I have not tried printing from the Mac while her HP is AFU.)
How do I rectify this, other than taking her HP back and getting the Mac she'd be happier with?
Any and all help would be greatly appreciated, as she's in school and needs to print a lot of papers.
Doc

There has been no satisfactory answer to this. So, no, my question isn't really answered.
Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
I'm not so thrilled, but she's happy. And if she's happy, it's okay.
I guess.
Doc

HP OfficeJet 2544 Windows 8.1 Printing Issue

Hi there,
I am having a frustrating problem with my HP OfficeJet 2544. It happens all the time if I want to print anything more than one or two pages, and it only happens to me on my Desktop PC (i.e. my wife's laptop doesn't experience the issue).
What is happening is this: I send a document (multiple pages) to the printer, and then after the first page or so, I get a Windows 8 error message popping up saying the document couldn't print. The printer then spits out whichever page it is currently printing, usually half printed. If I want to print a multi page document, I have to print it one page at a time. I can't even send it to the printer in groups of 2 or 3 pages!
The printer is connected wirelessly, but I don't think it is a wireless issue. We have good strong signal in our house, and in any case, if it was a wireless connection issue my wife would have the same issue, which she does not.
I thought there was some bug in my Windows 8.1 installation, so I did a clean reinstall. This did not fix the issue. I have also tried reinstalling the drivers (did not work either) and clearing out the Print Spooler folder (again, no luck).
The only thing I can think of is that a while back the HP Update program said there was a Firmware update for the printer, which I installed. But if this was the problem, I imagine it would be affecting my wife's Laptop too?
I am getting fed up with the issue, and as I am doing a part-time degree I have to print multi-page documents from time to time! Does anyone have any ideas?

Hello @SamuelH82
I have some ideas that come to mind when I read through your post about the printing issues you have solely from your computer, as the other computer works find with the printer.
The printer hardware proves to test out alright, as the other computer does function fine with it.
I would suggest first running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. This alone could help fix the problem.
Also, try printing from other programs. Do they all appear to have the same problem?
Disable any firewalls and anti-virus' temporarily. Try printing again to see if that helped.
How far is the printer from your computer, and what are in between them that could cause interference? Having the computer and printer too close could cause disconnections.
Let me know the results thus far and your findings.
Enjoy the rest of your day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

SAP printer issue using output method store in windows

Hi,
Here is my issue:
I created a printer in SAP in t-code SPAD. The host spool access method is C, direct operating system call. The host printer (windows printer) has an output method «store», which means that the printing request is stored in the printer and the user needs to release the printing job directly on the printer using a password.
If we use printer LOCL_LOCAL, this works correctly, i.e. the printing job is sent in the printer memory and the user release it with his password
If we use a printer with an access method C, the printing job bypass the output method store and the job is printed immediately.
Any idea why the acces method C is not working for output method «store» in Windows?
Thanks,
Julien

ideally it should work if the spool work process of the SAP System and the host spool system (operating system spooler) are on the same host. is this the case?
check [http://help.sap.com/saphelp_nw70/helpdata/en/4f/9c033cff903105e10000000a114084/content.htm]

Windows upgrade to 8.1 from 8.0 printer issues

I recently upgrade from windows 8.0 to 8.1- I immediately starting having printer issues, with the black white crispness of my printer. I tried to adjust the setting to no avail. I read that sometimes you need to reinstall your printer software, so i tried to uninstall and re-install... no i am unable to bet my printer software to load. I have tried with the disc that came with the pritner and the online options. I cannot print at all now, and i don't know what to do. I am so frustraited that nothing i try works. I've looked into tyring to uninstall windows 8.1 but i've found out that it's not easy i'd have to basically reimage my computer to 8.0 and reload everything.
What is your solution HP? my laptop is an HP 2000-2d27cl Notebook PC
We have another laptop of the same model but has windows 8.0 on it, it is able to use the printer without any issues.
Thank you-

Hi @mysticsol8 ,
I see that you are experiencing issues installing the printer software again. I would really like to be able to help you resolve this issue.
What happens when you are trying to install the software? (error message, printer not being recognized)
Please try the following steps to see if it will help with getting the printer installed.
Disconnect the USB cable.
Run the uninstall again.
Perform a clean boot on the computer and turn off the Antivirus Software. How to perform a clean boot in Windows.
Then run the installation, immediately after connecting the USB cable, follow the steps in this document to update the drivers so it doesn't error out again. A Fatal Error Displays During Software Installation. Then the installation should continue.
Test the printer.
How is the printer connected? (USB/Ethernet)
If you appreciate my efforts, please click the Thumbs up button below.
If there is anything else I can help you with, just let me know. Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing issues in Windows 8.1

Hello,
I work for a company and we have a number of network printers shared, when we connect to a network printer it installs the driver and everything is fine and normally this is the end of it but recently I have one user who is having print issues. It seems
as though every time he takes his laptop home and brings it back he is unable to print, the printers show offline or the job appears to print but never does. Today we got this error when attempting to print a test page " Test page failed to print. Would
you like to view the printer TS for assistance? The server print spooler service is not running" which it was because I had stopped and started it several times already. Finally I was able to delete the network printers and reinstall them as a temporary
fix but history has demonstrated that once he take this laptop home the problem will reoccur. I read and re-read most of the come close to describing my issue but not completely.
Thanks,
OSAMTEC

every time he takes his laptop home and brings it back he is unable to print, the printers show offline or the job appears to print but never does.
Could there be a naming conflict?
Otherwise it looks as if there is a troubleshooter for printer and other loosely associated categories. Have you tried them?
BTW I'm curious if WMIC could be used here. As I just mentioned in another incident these look interesting:
C:\>wmic.exe /? | find /i "print"
PRINTER                  - Printer device management.
PRINTERCONFIG            - Printer device configuration management.
PRINTJOB                 - Print job management.
Good luck
Robert Aldwinckle

JVM 1.4.x IE 6 CPU utilization 100% when issue window.print

I am using JVM 1.4.2_04, IE 6 and WinXP Pro.
When visiting internet application having applet initialized, and click the PRINT link (window.print()), suppose the print dialog box will be shown, however, the CPU utilization draw up to 100% and the dialog cannot be shown over 10 minutes.
I had tried with 1.4.1_x, the same result found.
If using 1.3.1_x on the same application, no problem found, can anyone help.

case solved, which is due to the bug_id 4942346

Wireless Printing Issue with Window 8

hello there,
we have few window 7 & 2 window 8 laptop.
all window 7 laptops are working fine with Wireless Router.
but one of my window 8 laptop is not getting connected with my Wireless Printer.
is there any solution for the same?
as i am been finding very difficult to set up all this things.
please let me know if any one of you can help me out in this matter.
my another window 8 laptop is working properly.
but in my new laptop with window 8, my printer is showing me OFFLINE only.
Thanks in advance.
regards...

Are you running 8 or 8.1. There is a bug in the network default configuration in 8.1 that will cause this behavior. If you have 8, are you connecting over Standard TCP/IP Port or WSD?
Did you already install a vendor driver? Which device are you connecting to.
Alan Morris formerly with Windows Printing Team

HP Deskjet 1510 - Printing Issue

Hi,
Sorry if I have entered this in the wrong place but I am new to the forum.
My father has purchased a new HP Deskjet 1510. He has a Toshiba Laptop running off Windows Vista 32-bit.
I have used the installation CD provided to install and also downloaded the latest HP Drivers from the website as prompted.
All appears to have installed correctly and I am able to print all types of documents except word documents. (PDF's, Screengrabs, HTML pages etc.) When I print a word document, the printer goes through the motions but prints a blank page in the end.
I am also able to copy & scan documents in both black & white and colour.
I have tried various troubleshooting applications (HP Print & Scan Doctor, Windows Print Fix etc.) and all say that the printer and settings are all in working order.
I have also removed and reinstalled the printer but the problem remains.
I have also installed the printer on my own laptop (Dell Inspirion running off Windows 8) but the printing from word issue remains.
I am at my wits end and would appreciate if someone could provide some assistance.
Cheers.
Mageegs

Hi Mageegs,
Welcome to the HP Forums!
I understand that you can print all types of documents except for word documents with your HP Deskjet 1510, and I am happy to help you with this issue!
Please take a look at this website. How to troubleshoot printing problems in Word.
Otherwise, please contact Microsoft Support, since everything else is printing okay.
Hope this helps you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

New airport extreme and printer issues

OK here is the deal
I have the new airport and a hp psc 750 printer. I have a new macbook which can not print on this printer. It will recognize it thru bonjour but will not install the driver - the odd thing is that I have a pc connected directly and a windows based wireless laptop which both are able to print via this airport. I also have an external hard drive that is connected to the airport. All of the computers are able access this drive. So all appears in order except for the macbook-printer issue. I contacted tech support and they claimed driver issue. Anyone have any ideas - I have updated the most recent drivers for this computer and I was able to install this printer via a usb connection. Thanks

There have been a few posts about issues with HP printers working or not working as the case may be through the extreme. I can't remember what they say, but a search for HP in this forum may well help you.
Sorry to be so vague, just thought it might be a start for you.

Printing issue

I just replaced my b/w cartridge which was working for about 10 copies and now trying to print a colored copy and while the color print is fine, the black ink is coming out blurry/smudged. The screen indicates "Print cartridge problem (Black) Refer to device documntatnion to troubleshoot" I took out the cartridge, shook it, put it back in - no luck - help! Thanks

Hi @LYNNHAAG , and welcome to the HP Forums!
I see you're experiencing print issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Windows 10 Printer Issues

Similar Messages

Maybe you are looking for