Windows 10 reservation with one e-mail address on different devices?

I would say you can based on this information
"In order to register your install of Windows 10 an activation code will be created to uniquely identify your system. This is likely going to be some type of a hash code based on your unique system hardware configuration. It will probably use a combination of individual hardware ID’s for multiple items in your system like the hard drive, network card, video card. motherboard and possibly your Microsoft account to build this unique identifier."
http://winsupersite.com/windows-10/could-your-microsoft-account-and-windows-10-activation-be-connect...

Dear colleagues,
I`m reading different posts for reserving and getting the new Windows 10 OS, but one thing is missing for me. If I have several laptops and home workstations, all running Windows 7 Ultimate / Windows 8.1 Pro, can I reserve a copy for each of this devices using one and the same mail address. The reservation will be made on every device.
Please apologise me if this info is written in this forum, i just can`t find it.
This topic first appeared in the Spiceworks Community

Similar Messages

Can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

can you have different accounts (meaning different passwords, different countries/store) with the same apple ID (only one e-mail address)?

thank you for your reply, it is not very fair from apple, since for not using your credit card, you need to create a new account and if you do not have multiple e-mail working , you are stuck! thanks anyway

I cant access my account as I tunes says no one with my e-mail address exists. If I try to create a new account with my e-mail address, I am told this address is already in use?

I have had an account for some time. I tried to log on yesterday to be told my credetials were wrong. I tried to reset my password but get 'your session timed out' message after less than 30 seconds! (happened 4 times). I then tried to access my account with my e-mail address. I am tols that there is no account with thaqt e-mail address, but if I try to create a new account with my e-mail address, I am told that address is already in use. To get to this community page I have had to create a new account with a new gmail address. I want to get to my main account as I have credit on that one. Please help?
gerryfrom hatfield.

Hello gerryfromhatfield,
There is a process, an article about how to find your apple id and get access to it. It is named Apple ID: Finding your Apple ID found here: http://support.apple.com/kb/HT5625?viewlocale=en_US
You start at the top, and work your way down.
If you can't remember your Apple ID, you can find it by using the password retrieval process at My Apple ID. Follow these steps to recover your Apple ID name:
Go to My Apple ID and click "Find your Apple ID."
Complete all the required fields that might be associated with your Apple ID.
Note: If multiple email addresses have an Apple ID, select your current or most recently used email address.
All the best,
Sterling

Hi, we have one e-mail address but would like to have 3 accounts with i-tunes I'm sure there must be a way, HELP!

Hi, we have one e-mail address but would like 3 accounts with i-tunes have tried for HOURS but I only seem to be able to link one account per e-mail address, there must be a way please HELP!

Yes get 2 other email addresses eg Hotmail and Gmail. Both are free.

HT201342 Hello, I have an Apple-iCloud account and have used one e-Mail address with that account. I want to add another address for my wife. How do I do it? Thanks

Hello, I have an Apple-iCloud account and have used one e-Mail address. I would like to add another address for my wife on same account. How do I do it?

Hey there Raul,
It sounds like you have an iCloud account, and want to create one for your wife using the same iCloud account. You can do this with an iCloud Alias, and this article will help you do that. Keep in mind that any and all purchases made with the alias will not be transferrable or merged with another account if she wants to have her own account down the road.
iCloud: Create or change email aliases
http://support.apple.com/kb/PH2622
Thank you for using Apple Support Communities.
All the best,
Sterling

Can I have more than one e-mail address attached to my apple account?

I can't seem to create different FaceTime accounts using different e-mail addresses but with 1 Apple account. My daughter's IPod is attached to my Apple account, but I want to use her e-mail address for her FaceTime app. Any thoughts?

Cessna007 wrote:
how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

How do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

Cessna007 wrote:
how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

How can i use Mail on 2 macs with the same mail address?

Hi,
I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
What is to be done to separate the two systems (i. e. make them independent of each other)?
Hans

It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

Why can't I play paid purchases that were purchased with an E mail address no longer used a

Why can't I play paid purchases that were purchased with an E mail address no longer used and the purchses won't sync to my I Pod. I can see them in my I Tunes library but when you click on the song it says Please Authorise this computer showig an old E Mail address and it wont work. ???

The Apple ID to authorize is very old, ( I don't have password) so I use my NEW apple ID and password
Why do you have a new AppleID and passwortd?
Just update the old one and continue to use it.
You can get your password and edit the info here -> http://iforgot.apple.com/

TS4139 I had 2 MobileMe email addresses, but only went thru ICloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with both addresses? Can I get that address back?

I had 2 MobileMe email addresses, but only went thru iCloud process with one (my main address). Now the secondary address is not working with iCloud. Did I have to go thru the process with each address? Can I still get that secondary address to work with iCloud?

It was totally separate. I just now went back to a previous email from Apple to that secondary address which urged me to transition to iCloud. I followed the link and it prompted me thru the process and the address is now able to send/receive emails. Thanks.

RA VPN into ASA5505 behind C871 Router with one public IP address

Hello,
I have a network like below for testing remote access VPN to ASA5505 behind C871 router with one public IP address.
PC1 (with VPN client)----Internet-----Modem----C871------ASA5505------PC2
The public IP address is assigned to the outside interface of the C871. The C871 forwards incoming traffic UDP 500, 4500, and esp to the outside interface of the ASA that has a private IP address. The PC1 can establish a secure tunnel to the ASA. However, it is not able to ping or access PC2. PC2 is also not able to ping PC1. The PC1 encrypts packets to PC2 but the ASA does not to PC1. Maybe a NAT problem? I understand removing C871 and just use ASA makes VPN much simpler and easier, but I like to understand why it is not working with the current setup and learn how to troubleshoot and fix it. Here's the running config for the C871 and ASA. Thanks in advance for your help!C871:
version 15.0
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
hostname router
boot-start-marker
boot-end-marker
enable password 7 xxxx
aaa new-model
aaa session-id common
clock timezone UTC -8
clock summer-time PDT recurring
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.2.1
ip dhcp excluded-address 192.168.2.2
ip dhcp pool dhcp-vlan2
   network 192.168.2.0 255.255.255.0
   default-router 192.168.2.1
ip cef
ip domain name xxxx.local
no ipv6 cef
multilink bundle-name authenticated
password encryption aes
username xxxx password 7 xxxx
ip ssh version 2
interface FastEthernet0
switchport mode trunk
interface FastEthernet1
interface FastEthernet2
interface FastEthernet3
interface FastEthernet4
description WAN Interface
ip address 1.1.1.2 255.255.255.252
ip access-group wna-in in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
no cdp enable
interface Vlan1
no ip address
interface Vlan2
description LAN-192.168.2
ip address 192.168.2.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Vlan10
description router-asa
ip address 10.10.10.1 255.255.255.252
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list nat-pat interface FastEthernet4 overload
ip nat inside source static 10.10.10.1 interface FastEthernet4
ip nat inside source static udp 10.10.10.2 500 interface FastEthernet4 500
ip nat inside source static udp 10.10.10.2 4500 interface FastEthernet4 4500
ip nat inside source static esp 10.10.10.2 interface FastEthernet4
ip route 0.0.0.0 0.0.0.0 1.1.1.1
ip route 10.10.10.0 255.255.255.252 10.10.10.2
ip route 192.168.2.0 255.255.255.0 10.10.10.2
ip access-list standard ssh
permit 0.0.0.0 255.255.255.0 log
permit any log
ip access-list extended nat-pat
deny   ip 192.168.2.0 0.0.0.255 192.168.100.0 0.0.0.255
permit ip 192.168.2.0 0.0.0.255 any
ip access-list extended wan-in
deny   ip 192.168.0.0 0.0.255.255 any
deny   ip 172.16.0.0 0.15.255.255 any
deny   ip 10.0.0.0 0.255.255.255 any
deny   ip 127.0.0.0 0.255.255.255 any
deny   ip 169.255.0.0 0.0.255.255 any
deny   ip 255.0.0.0 0.255.255.255 any
deny   ip 224.0.0.0 31.255.255.255 any
deny   ip host 0.0.0.0 any
deny   icmp any any fragments log
permit tcp any any established
permit icmp any any net-unreachable
permit udp any any eq isakmp
permit udp any any eq non500-isakmp
permit esp any any
permit icmp any any host-unreachable
permit icmp any any port-unreachable
permit icmp any any packet-too-big
permit icmp any any administratively-prohibited
permit icmp any any source-quench
permit icmp any any ttl-exceeded
permit icmp any any echo-reply
deny   ip any any log
control-plane
line con 0
exec-timeout 0 0
logging synchronous
no modem enable
line aux 0
line vty 0 4
access-class ssh in
exec-timeout 5 0
logging synchronous
transport input ssh
scheduler max-task-time 5000
end
ASA:
ASA Version 9.1(2)
hostname asa
domain-name xxxx.local
enable password xxxx encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd xxxx encrypted
names
ip local pool vpn-pool 192.168.100.10-192.168.100.35 mask 255.255.255.0
interface Ethernet0/0
switchport trunk allowed vlan 2,10
switchport mode trunk
interface Ethernet0/1
switchport access vlan 2
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan2
nameif inside
security-level 100
ip address 192.168.2.2 255.255.255.0
interface Vlan10
nameif outside
security-level 0
ip address 10.10.10.2 255.255.255.252
ftp mode passive
clock timezone UTC -8
clock summer-time PDT recurring
dns server-group DefaultDNS
domain-name xxxx.local
object network vlan2-mapped
subnet 192.168.2.0 255.255.255.0
object network vlan2-real
subnet 192.168.2.0 255.255.255.0
object network vpn-192.168.100.0
subnet 192.168.100.0 255.255.255.224
object network lan-192.168.2.0
subnet 192.168.2.0 255.255.255.0
access-list no-nat-in extended permit ip 192.168.2.0 255.255.255.0 192.168.100.0 255.255.255.0
access-list vpn-split extended permit ip 192.168.2.0 255.255.255.0 any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
nat (inside,outside) source static lan-192.168.2.0 lan-192.168.2.0 destination static vpn-192.168.100.0 vpn-192.168.100.0 no-proxy-arp route-lookup
object network vlan2-real
nat (inside,outside) static vlan2-mapped
route outside 0.0.0.0 0.0.0.0 10.10.10.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
aaa authentication http console LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
http 10.10.10.1 255.255.255.255 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-256-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set reverse-route
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpool policy
crypto ikev1 enable outside
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 192.168.2.0 255.255.255.0 inside
ssh 10.10.10.1 255.255.255.255 outside
ssh timeout 20
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
anyconnect-essentials
group-policy vpn internal
group-policy vpn attributes
dns-server value 8.8.8.8 8.8.4.4
vpn-tunnel-protocol ikev1
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn-split
default-domain value xxxx.local
username xxxx password xxxx encrypted privilege 15
tunnel-group vpn type remote-access
tunnel-group vpn general-attributes
address-pool vpn-pool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
ikev1 pre-shared-key xxxx
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:40c05c90210242a42b7dbfe9bda79ce2
: end

Hi,
I think, that you want control all outbound traffic from the LAN to the outside by ASA.
I suggest some modifications as shown below.
C871:
interface Vlan2
description LAN-192.168.2
ip address 192.168.2.2 255.255.255.0
no ip nat inside
no ip proxy-arp
ip virtual-reassembly
ip access-list extended nat-pat
no deny ip 192.168.2.0 0.0.0.255 192.168.100.0 0.0.0.255
no permit ip 192.168.2.0 0.0.0.255 any
deny ip 192.168.2.0 0.0.0.255 any
permit ip 10.10.10.0 0.0.0.255 any
ASA 5505:
interface Vlan2
nameif inside
security-level 100
ip address 192.168.2.1 255.255.255.0
Try them out and response.
Best regards,
MB

More then one E-mail address per insurance provider

Hello to you all,
Does anyone have an Idea on how can I maintain more then one E-mail address per insurance provider?
In Tcode NG07/8/9 I am able to have only one which is not enough,
I would expect to have a multiple selection on that field like in customer master record Tcode FD01/2/3.
Regards,
Yoav

Dear Yoav,
In the Tcode NG07 only one mail id is given because from here you can send the files directly on clicking the mail icon. Because when you click on mail icon(adjacent to box) it shows whom you are sending the data, here you can also mark CC & BCC to the different users.
In Customer you are not mailing directly. If you have any query you can reply back.
Regards
Piyush

One e-mail address but using multiple servers

Hello all, I am hoping to get some expert help here and greatly appreciate anything you can give me. I have one e-mail address that I use for school, but have one outgoing server when I am specifically on the school's network and another outgoing server to use when I am on my network at home.
Is there a way to set up Mail to automatically use the appropriate outgoing server for each network? For example, can I set it up to automatically use my school's outgoing server when I am on the school's network and to use my home ISP server when I am on my home wireless network? Also, I do not know if it matters, but I use both a LAN and wireless networks while at school, depending on whether I am in my office or in a classroom.
One more thing, I also use coffee shops a lot, ones that have wifi. Is there a way to train Mail to use my school outgoing server's whenever I am using those networks?
P.S. When I was using my XP laptop, I had similar issues. I am just hoping that Mail is smarter than Outlook. Thanks!
A recent newbie to Mac and OS X who is loving it! Never going back!

Slack,
simple solution for that;
make two accounts in Mail / Preferences
in the description, name one home, the other work
email address canbe the same.
In the outgoing mail server settings, set one for home, the other for work
Each time you compose a new mail, you get a dropdown menu after Accounts that will let you choose which account you are sending from.
When your network preference is set to Automatic, it will pick up the wireless network at your current location. Instructions as above for new mails.
This will depend on your school network if it allows you to send from their smtp server when you are not actually connected to their network.

I have one e-mail address that constantly hard bounces

I have one e-mail address for a client that constantly returns an error of
"An error occurred while sending mail. The mail server responded: <[email protected]> previously hard-bounced. Please check the message recipient "clients email address" and try again"
I also look after the mail server for this user name and I have tried deleting the account and re entering but it makes no difference. Other e-mail clients donut seem to have this problem.
Any ideas?
g

A soft bounce may mean that the mailbox if full., but a 550 error har bounce code sent from the server usually describes when the email address does not exist or is otherwise permanently not available.
Perhaps due to a typo in the email address or that email address is no longer valid.
Or maybe there have been several soft bounces that converted to a hard bounce.
Could the server be blocking the sender email address (possibly as part of a spam defence system), so the email is not delivered to recipient if sent from that particular email address.

Hi, we have one e-mail address but I am trying to set up 3 i-tunes accounts to that one address, can anyone PLEASE fill me in on how to do it

Hi, we ahve one e-mail address but i am trying to set up 3 i-tunes accounts to that one address can someone PLEASE fill me in on how to do it

As far as I know, you can't. One ID per e-mail.
For your other accounts, you can get an e-mail from gmail or yahoo or another free provider.

Windows 10 reservation with one e-mail address on different devices?

Similar Messages

Maybe you are looking for