Windows 10 sleep mode not working

windows 10 sleep mode not working

I hope this helps. But... I had the same problem last week. Now I don't as of 8/17/15. I am not sure if a windows 10 update fixed this. I do not like problems that without any assistance fix themselves. However, try sleep mode again. This problem may have been fixed.

Similar Messages

Sleep mode not working properly in windows

I have a P67A-GD65 working fine (THANK GOODNESS!) but I have a small annoyance.. It wont wake up from sleep mode unless the power button is pressed! How can I change this to wake up on say, when I click a button on my mouse or my keyboard or even move the mouse? I have the latest bios installed. Thanks!

Depends if you have USB or PS/2 KB/mouse
Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3 (Suspend
to RAM) sleep state.
Resume From S3/S4/S5 by PS/2 Mouse/ Keyboard
These items determine whether the system will be awakened from what power saving
modes when input signal of the PS/2 mouse/ keyboard is detected.

Lenovo s10 3t sleeping mode not working???

I just received my lenovo ideapad 2 days ago and upgraded to ultimate.. my problem is , even before i upgraded it and it was on windows starter, whenever i put on sleeping or hibernate mode, it actually SHUTS DOWN? after putting/thinking it was on sleeping mode, i tried to turn it on again, hoping that it will go back to where it was before., then i realized, i have to go on the safe mode or start normally coz it said it didn't properly shuts down. BUT i didn't even shut it down.. i only put it on sleeping mode.. why is it so? anyone have the same prob? or am i pressing the wrong button (the power button) in order to turn it back on from the sleeping mode.. it really bugs me that it always kinda restarting when it is supposed to be asleep!!! i changed the power setting to having the sleep mode longer than an hour and tested it within few minutes by putting on the sleep mode and try to put it back on, it still goes into computer not properly shut down ---> safe mode or start normally window thingy.. what is wrong here???
HELP PLEASE.. thanks a bunch..
Solved!
Go to Solution.

Hi and welcome, did you install Lenovo Energymanagement there are some points to configure...
here an excerpts of my article... .. the settings .. way gettin in
Energy Management -->advanced tab
Section options check Enable Hibernation check Auto adjust schemes according to battery power
Sectionower buttons When I close the lid of my portable computer choose Stand By
When I press the power button on my computer choose Shut Down
When i press the sleep button on my computer (Hint: on S-Series Fn-F1) choose hibernation
sincerely KalvinKlein
Want more ? For further information to get the most of your S-Class machine
Lenovo Energymanagement Backup Windows 7 Driver Windows 7 Install
Clean XP Install XP Startup Small WebCam Guide Lenovo Easy Capture
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Stand-by / sleep mode not working when USB is connected

Hello!
When the USB cable from my 24" LED Cinema Display is connected to my new Mac Pro 2,66 GHz Quad-Core, the stand-by / sleep mode does not work correctly: the Mac Pro goes to sleep normally, then the LED behind the on-/off-button flashes one time and then the Mac Pro awakes from sleep mode without any user interaction.
I already tried to reset PRAM, I tested all three rear-side USB connectors (I did not test the front-side USB connectors because the display's cable is way too short), I unplugged all other USB and Firewire devices and also tried sleep mode from a freshly created account. Alas, nothing helps.
As soon as the display's USB connector is plugged in, sleep mode does not work any more. It even doesn't matter if there are USB devices plugged into the display. Without connecting the display's USB plug, sleep mode works fine.
So, any ideas out there?
Thanks in advance & best regards!
Mario.

I fixed the problem, so I just post this to help others that might run into the same trouble.
The Mac Pro and the display were connected to a master/slave power socket. The problem is: when the Mac Pro goes to sleep, there still seems to be some power left in the display (which socket is switched off by the master/slave power socket). Therefore, the display goes off slightly after the Mac Pro. This powering off seems to release a signal on the display's USB wire that is connected to the Mac Pro and therefore switches the Mac Pro on again.
So, this is the same effect as removing a USB device from the Mac during sleep mode, what (at least in most cases) also starts up the Mac again.
As a result, there seems to be no other solution to this problem than removing the display from the master/slave power socket. Sadly enough, the LED Cinema Display consumes other 2 watts in stand-by mode...
Cheers!
Mario.

Sleep mode not working properly on Macbook Pro

On my Macbook Pro everytime my mac enters sleep mode just the display goes to sleep never the system even after 8 hours. Checked the energy saver setting both display and computer are set to ten minutes. I can also never get the display to wake back up unless i do a hard reset. Any ideas? Thanks!

Does it now work only on battery? or using the power supply?
If only on the power supply use a grounded plug.
Otherwise try reseating touchpad cable. Post the size and year of your MBP.

Sleep mode not working after iMac WLAN Update 1.0

Hello,
unfortunately the sleep mode isn't working anymore after the latest "iMac WLAN Update 1.0" update.
Usually I press cmd+alt+eject to activate the sleep mode, since the update the screen switches off (black) for a second and immediately turns on again. Fans and HD keep running without any interruption.
Same behaviour if I use the "sleep mode" command from the Apple menu, except the screen turns off and keeps off, but fans and HD are still running.
The iMac never activates the sleep mode by itself (e.g. after 15 minutes), this also a new "feature" which occured after the update.
Is there anyone recognizing the same problems? Any hints how it can be solved?
Thank you very much in advance,
Oliver

I finally found the solution in a German newsgroup. First: It has nothing to do with the "iMac WLAN Update 1.0" .
A unsuccessful printer job caused the problem and just open the CUPS site http://127.0.0.1:631/jobs and delete the hanging job solved the problem!
Thanks,
Oliver

My sleep mode not working right why?

My Mac Pro comes back on during the night when it's in sleep mode.Why?

It could be Bluetooth. Do you have Bluetooth wireless mouse and keyboard?
I had this problem until recently. It seems to have gone away since updating OS X to 10.8.5.
Open Console next time this happens to you. Scroll to the point at which the machine went to sleep and then awakened.
If you see something like what I've pasted below, then you're bluetooth devices are waking the machine.
10/13/13 1:06:45.000 AM kernel[0]: Wake reason: UHC6
10/13/13 8:45:44.000 AM kernel[0]: 0x1face000, 0 Intel82574L::setLinkStatus - not active
10/13/13 8:45:44.000 AM kernel[0]: 0x1face001, 0 Intel82574L::setLinkStatus - not active
10/13/13 8:45:44.000 AM kernel[0]: Previous Sleep Cause: 5
10/13/13 8:45:44.000 AM kernel[0]: The USB device BRCM2046 Hub (Port 1 of Hub at 0x5a000000) may have caused a wake by issuing a remote wakeup (2)
10/13/13 8:45:44.000 AM kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0x5a100000) may have caused a wake by issuing a remote wakeup (3)

Sleep mode not working in Windows 8.1 on pavilion x2 11-h010ca

Hello,
I've done 2 fresh installs from the HP recovery, then upgrading to 8.1 with all patches, but this hasn't helped.
What I've discovered is this:
- Using the standard Windows video driver: the machine will sleep and resume properly, but I cannot control the brightness (it's always 100% bright).
- If I install the Intel driver from the Intel site (or HP's site), I can control brightness. When I put the machine to sleep, then resume, it crashes. It takes a few tries to bring it back up, but it always does a full restart.
I've installed all the latest updates through the HP tools on here, but hasn't helped in any way.
Help on this would be great.. Thanks.

That doesn't seem to help at all. Symptoms are the same - When I press the power button to bring it out of sleep, it buzzes briefly and the screen stays black.

Windows 7 Sleep mode not turning off fan

I have a weird sleep issue that just started, I've built a new PC, Win7x64 and just noticed this happening. When I put the computer to sleep manually, the machine looks like it goes to sleep, but the fans keep running and it 'sounds on'. If I wake the PC,
then put it right back to sleep, it goes into deep sleep and the fans go off. Nothing I can see is keeping it awake, I have a i5-2500k, Asus P68 deluxe mobo, and it seems to be a repeatable issue. If the PC wakes up by itself to do something, then goes back
to sleep on its own (times out) it goes into deep sleep. It's only when I manually do it that it has the issue. Anyone ever seen this? Thanks!
/curt
Curt Kessler Franklin Loan Center

I have a weird sleep issue that just started, I've built a new PC, Win7x64 and just noticed this happening. When I put the computer to sleep manually, the machine looks like it goes to sleep, but the fans keep running and it 'sounds on'. If I wake the PC,
then put it right back to sleep, it goes into deep sleep and the fans go off. Nothing I can see is keeping it awake, I have a i5-2500k, Asus P68 deluxe mobo, and it seems to be a repeatable issue. If the PC wakes up by itself to do something, then goes back
to sleep on its own (times out) it goes into deep sleep. It's only when I manually do it that it has the issue. Anyone ever seen this? Thanks!
/curt
Curt Kessler Franklin Loan Center
I had the same issue a while ago. It ended up being because I added my network printer to the printers folder by clicking 'add a network printer' rather than 'add a local printer'.
When I added a 'local' printer (and pointed it to the IP Address of the printer) the sleep issue went away. Both methods (network/local) were able to print to my network printer, but the network printer option would result in my fans never spinning down.
Weird, right?
-Kramy

Windows 2008 R2 does not work on Sunfire X4170

Hi, I recently bought a used X4170 server and have a weird problem. Windows 2008 R2 does not work, but 2012 does. I tried RTM version and a version with SP1. The problem is this:
After installing, I set the password and windows just displays a blank desktop, sometimes it boots but freezes soon after - the mouse cursor moved but nothing else works.
Booting in Safe Mode works and Windows do not freeze. The Event Log contains lots and lots (about 20 per second) of these entries:
Log Name:
System
Source:
Microsoft-Windows-WHEA-Logger
Date:
6/21/2014 12:24:59 AM
Event ID:
17
Task Category: None
Level:
Warning
Keywords:
User:
LOCAL SERVICE
Computer:
WIN-SOGS2TPM334
Description:
A corrected hardware error has occurred.
Component: PCI Express Root Port
Error Source: Advanced Error Reporting (PCI Express)
Bus:Device:Function: 0x0:0x0:0x0
Vendor ID:Device ID: 0x8086:0x3406
Class Code: 0x30000
I have tried updating the driver for this device (downloaded from Intel), no difference. Is there a way to make Windows 2008 R2 work on this server?

Hello
Thank you for the update.
Please refer the below Knowledge document related to this issue:
Windows BSOD WHEA_UNCORRECTABLE_ERROR(124) & correctable WHEA events when disabling network ports on X4170M2/X4270M2 (Doc ID 1576683.1)
However above document talks about X4170M2, I would suggest you to follow and if issue persist, please open Service Request with Oracle to diagnose further.
Best Regards
Bhavyesh

After ram upgrade automatic sleep is not working anymore

Some days ago I installed a second 1GB ram module in my 20" Intel iMac. After this I noticed that the automatic sleep do not work anymore. The display turns off but the iMac not. The iMac makes sounds like he wants to do to sleep but could not.
I tried everything I could find... delete OS X powermanagement prefs, run Onyx, reset the SMC.
Do anyone have an solution for this?
Thanks

Does your iMac recognize the new memory module?
Yes.
You might try reseating the module in its slot, and it
would not be a bad idea to run Hardware Test from
your install/restore DVD, just to be sure there is
not an underlying hardware problem.
Already done - no problems reported
Is your new memory module of the same specifications as the
stock module?
Yes it is the same, I had a look on this before I bought it because I wanted to use the dual-channel mode.
Also, what are your settings for sleeping your iMac?
5 min to sleep display, 10 min to sleep the mac
One other thing you may wish to
try is updating your system of OS X 10.4.6 (your
profile indicates that your a running 10.4.5).
Was updated to 10.4.6. I just forget to change the forums pref
I more thing to mention when I start the sleep mode manually everything is fine. I also tried to disconnect all external USB/Firewire hardware and tried it with a fresh mac os install on my USB HDD.
Nothing helped.
Thanks

Audigy Platinum Ex Windows 7 SPDIF IN not working

Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]
When I connect the phone he load and then says no connect

Hi,
Please try the following driver for "MediaTek (Ralink) Bluetooth":
http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

Hi,
I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
Windows 7 updates recently installed ???
By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

Hey eagle_no11,
Thank you for joining the HP Support Community!
I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
Please let me know how these steps do work out for you.
Have a great day!
I worked on behalf of HP

Windows 10 sleep mode not working

Similar Messages

Maybe you are looking for