Windows 10 Technical Preview for "Enterprise"?

What's different between "Windows 10 Technical Preview for Enterprise" and "Windows 10 Technical Preview"

Hi guys,
this might sound stupid, but how do I see if I have the Enterprise Technical Preview or the other one installed? I'm pretty sure I downloaded and installed the enterprise version, but I can't find any proof within the system itself? The System Information
just says "Windows Technical Preview".
Thanks
Stefan
Something like this but correct the path;
dism /get-wiminfo /wimfile:E:\Recovery\install.wim
If it doesn't say enterprise, its not.
Seems there are three installs that's ive seen.
Windows Technical Preview
Windows Technical Preview for Consumer
Windows Technical Preview for Enterprise
Thanks Mike, i no found out that i did not had the Enterprise Edition. Downloaded it now and even in Computer Information it says Enterprise now. Thank you.

Similar Messages

Installing administrative tools for Windows 10 Technical Preview for Enterprise

At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
Windows Update Standalone Installer
installer encountered and error: 0x8024001d
is there anyone to help me regarding above issue.
Thanks
Zelgay Kunari

Hi zelgay,
This is my result:
From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
DISM.exe /Online /Cleanup-image /Restorehealth
In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
Stop Windows Update service.
Open File Explorer.
Double-click the local hard disk where Windows is installed, typically drive C.
Double-click the Windows folder, and then double-click the
SoftwareDistribution folder.
Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Back button. In the SoftwareDistribution folder, double-click the
Download folder to open it, and then delete all files in the folder.
Restart Windows Update service.
Alex Zhao
TechNet Community Support

Windows To Go Device using Windows Technical Preview

I have successfully made a Windows To Go Device by the steps in this Technet forum post:
http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
Flash Drive.
Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

Hi G.One1,
In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
Here is my thought and steps.
First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
Alex Zhao
TechNet Community Support

Can i use windows 10 technical preview for commercial purpose like developing projects in visual studio

can i use windows 10 technical preview for commercial purpose like developing projects in visual studio

No, Windows 10 Technical Preview is for testing and evaluation only , in addition it is not the final version of Windows and it is strongly recommended to use it for testing
not production.

Adding features to Windows Technical Preview

Why serial code not work with Windows Technical Preview evalution copy Build 9879?
Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

Hi,
Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
Regards.
Yolanda Zhu
TechNet Community Support

Couldn't install windows technical preview on a usb flash

Hi,
couldn't install windows technical preview on a usb flash setup.
please say me the solution to this problem

Hi,
Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
Windows USB/DVD Download Tool
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Officejet Pro K550 in Windows Technical Preview

The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
Thanks

Hi,
Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Understand the technical base for Enterprise Services?

Hi all,
I am trying to understand what is the technical base for enterprise services and the restrictions when activating them. The best documents I have found are:
Note 1566412 u2013 Enhancement package 6 for SAP ERP 6.0.
Note 1359215 u2013 Technical prerequisites for using enterprise services
sdn blog u201CDetermin the SOA readiness of your System with the ES Workplace (Part 1 and 2)
EHP Master Guide - https://websmp107.sap-ag.de/~sapidb/011000358700001183052011E
The documents are quite informative, however there are still questions. Maybe someone can shed some light of these:
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
a. An EHP (with relation to a business function).
b. The swc u201CESA ECC-SE 60xu201D (without relation to a business function). E.G. ES Bundle "Bank Communication Management".
c. The SWC u201CSAP APPLu201D (without relation to a business function). E.G. u201CBusinessPartnerERPUpdateRequestConfirmation_Inu201D
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
Do I need the XI Content with the service interfaces in ES Repository (and SPROXY) only if the communication is B2B (with PI) or also if the communication is Point-2-Point (without PI)?
Thanks for your feedback!
Chris

Hi Chris,
I'll try and provide answers where I can...
1.) Is my understanding correct that Enterprise services can have three different base u201Cmodulesu201D?:
I personally don't agree with this understanding. Enterprise Services would always relate to some or other business function, unless we have a different understanding of what "Business Function" means . What changes is how the Enterprise Services (or versions of them) are delivered.
SAP APPL for example would be relevant to most of the enterprise services shipped with a standard ECC EHP*. So it will relate to the business functionality for the applications that are shipped with an ECC installation.
2.) Is it possible to activate enterprise services (bundles) that rely on business functions after a EHP installation or ONLY during the EHP installation?
I don't understand this question but I'll try and offer a generic answer. You can activate/use Enterprise Services whenever you want to as long as they are already available in your current installation. If they are only available in an EHP that you don't have yet then you will need to upgrade (but I also seem to recall some workarounds - SAP notes - as an alternative to upgrading).
3.) Is it possible to activate enterprise services with base u201CESA ECC-SE 60xu201D after a EHP installation or ONLY during the EHP installation?
You decide when you would like to activate it, it's generally after. SAP will ship them anyway.
4.) Is SWC u201CESA ECC-SE 60xu201D a u201Ctechnicalu201D business function, whose activation cannot be reverted either? If yes what effect has the activation von u201CESA ECC-SE 60xu201D on the current ERP customizing?
There is a tool call Impact Analyzer, read up a little on it. It allows you to do an impact analysis before activating. It might also help posting a separate thread on of the ECC functional forums here on SCN for more impact analysis. I'm not sure if the activation can be reverted.
5.) How do the Enterprise Services relate with Service Interface definitions from SAP Process Integration (XI Content)?
The XI Content is the design equivalent of the Enterprise Services as you see them in SPROXY. It's only relevant in certain cases, examples:
- If you want to enhance standard SAP Enterprise Services
- If you want to do additional transformation/s & routing.
If you are planning P2P type communication, then the XI content is not relevant. One thing to be aware of though is if you have your backend ECC system connected to your PI ESR, the view that you get in SPROXY will reflect the SWC view of the ESR. So you might want to download the XI Content & import it into your PI ESR anyway.
Regards, Trevor

Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
Windows will perform the install and request a restart.
While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
Anyone have any ideas?

So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
Windows will perform the install and request a restart.
While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
Anyone have any ideas?
Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
me the advanced repair options.
The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
out again. No real diagnostic info presented as to why.

Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
in Update & Recovery Menu (PC Settings)
Build 10036 announced by rumour mill...
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

Microsoft Community got there first...
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
Thanks Andre da Costa
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
We only reply to questions posted in TechNet forums.
We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
There is no such thing as who gets "there" first.

Windows 10 to be free upgrade for first year for users of Windows Technical Preview?

Hello, in article I have read that will upgrade to Windows 10 users for free Win 7 & 8.1. I want to ask how it will be with those who use a version of the technical prewiev. I will also have a free update?
Thanks for the answers
Vít Repka

after 1 year if I do not want to purchase the upgrade, what happen to my computer, will go back to window 7?
What do you mean? You've already installed the Win 10 tech preview and you're wondering if it will automatically revert to the old software you were running some months ago after the trial period expires?
LOL
No.
Your expired Win 10 preview will pop up an "expired" notice and become less usable. Assuming it works like all other trial periods of Windows, it will limit its functionality and start shutting itself down every few hours. If you
want to revert it, it will be up to you to reinstall the old version. And then can anyone guarantee that it will reactivate properly?
Beyond that, and to the original point of this thread, what the mechanics will actually be for upgrading to Win 10 after its release on a system that was originally properly licensed for an earlier version of Windows are still not clear. We'd like
to hope that a product code for a legitimate licensed copy of an older version would just work to install Windows 10 from a DVD (ISO), but no doubt it will be more complicated than that. It shouldn't be, but it almost certainly will be.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Problem installing Windows Technical Preview build 9926

I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

PH
Do you know that you can make an ISO to install 10041 and not have to install 9926?
http://microsoft-news.com/download-windows-10-build-10041-iso-image/
Wanikiya and Dyami--Team Zigzag

Windows 10 preview for lumia 1020?

Hi, is there preview of Windows 10 available for lumia 10 in Pakistan...?

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here: http://answers.microsoft.com/en-us/winphone/forum/wpdp
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Windows Phone 10 Technical Preview for Lumia 521 Data Connection Issues.

Hello,
My name is Addiel Gutierrez and i have a question about the data connection issues that i am having for the Lumia 521.
The problem is that the "4G" won't show up, there is no connection, but i can still send messages or call.
My question is
Is there going to be an update of fixing this issue? Or How can i fix this?
Thanks!

same problem on my lumia 520, camera and phone work but no internet apps works, no connection for wifi

Technical Specification for Enterprise Portal

Our EP consultant left without delivering Technical Specification. Now, we need to prepare this document mainly for handover to support team. Coming from BW background, I have little knowledge on what is expected in the document.
What I can think of at the moment are that we need to document the followings:
1. Portal Content structure
2. iViews Configuration
3. Portal Display
Is there anything else missing? Or can someone share with me the structure of a complete Enterprise Portal Technical Specification?
Thank you very much!

Hi M. Syuhair,
That's a rather unfortunate situation that you have walked into where the implementer has left without documentation.
I would start the document with a blueprint diagram of the platform landscape, with each of the logical instances purposes described. You should include the OS and DB versions and any specifics on security zoning you may have. Then move into a diagram for transport flows and description of the purpose of the Portal. i.e. used for BI and ESS/MSS scenarios.
Also I would describe the integration with the solution, how security is provided, what other components are integrated (i.e. document repositories), how transports are performed (CTS, NWDI etc) and what systems are connected and SLD connectivity. Also mention UWL and Adobe services if they are deployed and anything else that represents significant usage.
After this point you can dig deeper into the detail and provide a description of the details of the business packages with versions you have deployed to the portal (use the NWA to look up package versions if you donu2019t know this already) along with the name spaces and PCD hierarchy that has been chosen to ensure standards are followed during maintenance by the support team.
Remember your support staff should be starting with at a minimum a basic understanding of standard SAP Portal implementations so getting to the detail of how each iView is configured would be taking the document too far.
Your purpose of the document is in providing the framework for support to be able to know what standards they should follow and how to quickly find out the implementation specific details. This should be your objective.
Starting this from scratch without any portal experience is not advisable, I would suggest you engage another Portal consultant to perform the task as familiarity with the core solution is really a must.
Regards
Daniel

Windows 10 Technical Preview for "Enterprise"?

Similar Messages

Maybe you are looking for