Windows 10 Technical Preview: Hiding OneDrive in the Explorer left pane

The title is self explanitory, here's a diagram: http://imgur.com/FDlIpPp .
If you notice, on the first panel, onedrive is there. In the second panel, onedrive is gone. Could I make the second panel reality?

Hi,
I'm afraid there is no option to remove OneDrive in Winows 10. If I found a method in the future, I would post here.
Thanks for your understanding.
Roger Lu
TechNet Community Support

Similar Messages

  • Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

          
    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?

    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?
    Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
    still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
    I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
    me the advanced repair options.
    The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
    out again. No real diagnostic info presented as to why.

  • Adding features to Windows Technical Preview

    Why serial code not work with Windows Technical Preview evalution copy Build 9879?
    Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

    Hi,
    Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
    If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
    Regards.
    Yolanda Zhu
    TechNet Community Support

  • Couldn't install windows technical preview on a usb flash

    Hi, 
    couldn't install windows technical preview on a usb flash setup.
    please say me the solution to this problem

    Hi,
    Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
    If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
    Windows USB/DVD Download Tool
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

    As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
    in Update & Recovery Menu (PC Settings)
    Build 10036 announced by rumour mill...
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

    Microsoft Community got there first...
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
    Thanks Andre da Costa
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
    We only reply to questions posted in TechNet forums.
    We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
    There is no such thing as who gets "there" first.

  • Officejet Pro K550 in Windows Technical Preview

    The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
    Thanks

    Hi,
    Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
    If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Windows To Go Device using Windows Technical Preview

    I have successfully made a Windows To Go Device by the steps in this Technet forum post:
    http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
    Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
    Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
    Flash Drive.
    Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
    Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

    Hi G.One1,
    In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
    I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
    Here is my thought and steps.
    First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
    convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
    In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
    I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
    I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
    Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
    For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
    Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
    Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
    Alex Zhao
    TechNet Community Support

  • My link preview has disappeared from the bottom left of the page (it no longer pops up when I hover over a link.) Thoughts on how to get it back? I really LIKE having it!

    My link preview has disappeared from the bottom left of the page (it no longer pops up when I hover over a link.) Thoughts on how to get it back? I really LIKE having it!

    It is possible that the screen is too high and that the scroll bar and the find bar and add-on bar fall off at the bottom.
    If that works then close Firefox (File > Exit/Quit) to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    If the above didn't help then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Why does the document window in illustrator cs6 move to the far left when I reopen the file?

    why does the document window in illustrator cs6 move to the far left when I reopen the file?

    Hi John,
    thanks for the fast response.  cs5 remembered the window position.  I like having the window in the middle as I have a 27" monitor.  I just upgraded to cs6 yesterday and I'm sure it was remembering the window document position.  I think.  If i find out how to fix this, I'll post it here.
    And while I'm on the subject of cs6, why the f*** did adobe combine the stroke and swatches pallettes?  Now I forever have to click stroke and swatch tabs all day.  And I love the army and navy file icons of photoshop and illustrator.  I won't comment on Acrobat X.  ; (

  • Problem installing Windows Technical Preview build 9926

    I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
    During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
    This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
    https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

    PH
    Do you know that you can make an ISO to install 10041 and not have to install 9926?
    http://microsoft-news.com/download-windows-10-build-10041-iso-image/
    Wanikiya and Dyami--Team Zigzag

  • Windows 10 to be free upgrade for first year for users of Windows Technical Preview?

    Hello, in article I have read that will upgrade to Windows 10 users for free Win 7 & 8.1. I want to ask how it will be with those who use a version of the technical prewiev. I will also have a free update?
    Thanks for the answers
    Vít Repka

    after 1 year if I do not want to purchase the upgrade, what happen to my computer, will go back to window 7?
    What do you mean?  You've already installed the Win 10 tech preview and you're wondering if it will automatically revert to the old software you were running some months ago after the trial period expires?
    LOL
    No.
    Your expired Win 10 preview will pop up an "expired" notice and become less usable.  Assuming it works like all other trial periods of Windows, it will limit its functionality and start shutting itself down every few hours.  If you
    want to revert it, it will be up to you to reinstall the old version.  And then can anyone guarantee that it will reactivate properly?
    Beyond that, and to the original point of this thread, what the mechanics will actually be for upgrading to Win 10 after its release on a system that was originally properly licensed for an earlier version of Windows are still not clear.  We'd like
    to hope that a product code for a legitimate licensed copy of an older version would just work to install Windows 10 from a DVD (ISO), but no doubt it will be more complicated than that.  It shouldn't be, but it almost certainly will be.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Windows 10 Technical Preview - Balloon Notification displayed at upper left corner always ?

    I am testing both Windows 10 Technical Preview for x86 (Version 6.4.9841), Windows 10 Pro Technical Preview x86 (Version 10.0.9926) and x64 ( Version 6.4.9860 ) and enabled the balloon notification via local group policy manager:
    1. "User Configuration->Administrative Templates->Start Menu and Taskbar->Disable showing balloon notifications as toasts" set to "Enabled"
    2. RE-BOOT.
    3. When I plugged and unplugged an USB thumb drive, the balloon notification shown at upper left corner of screen always.
    This is not right, as I have existing applications depending on balloon notification as well.
    Please advise.
    Regards,
    Ricky Gai.

    This web site is for helping visitors in writing software. 
    To send feedbacks to Microsoft about the preview, use the feedback app.
    Visual C++ MVP

  • Windows Technical Preview Build 9926 update

    Hi,
    I am trying to update my Windows 10 TP installation and it seems that it fails to download.  I am behind a proxy server in the office with no way around it.  Windows Update fails with error 0x80072ee2.  What I have picked up is that I can
    get the update list if I set a proxy server in BITS using "bitsadmin /util /setieproxy localsystem proxy1:port "bypass list".  However bits fails to download the updates returning either Error or Transient_Error.  Can you please assist
    with this issue?
    Regards,
    Riaan
    EDIT: I set proxy settings of each bits download job to PRECONFIG and the updates downloaded and installed.

    Hi,
    Did you set the proxy server via IE? Do you mean that the Windows Update Client ignore the proxy settings? To make Windows Update use the proxy setting, please execute the following command from cmd
    Netsh winhttp import proxy source=ie
    You can refer to this following KB for "how Windows Update finds proxy settings"
    How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site
    http://support.microsoft.com/kb/900935
    Yolanda Zhu
    TechNet Community Support

  • In the iDVD window, there is a box in the lower left corner.  When I scroll over it, I get the message to hide or show the intro movie.  Checking or unchecking the box seems to do nothing.  Can anyone explain?

    Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner.  Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie.  I have checked and unchecked the box, but see nothing different in the project.  Nor can I figure out what is meant by "intro movie."  Can anyone explain?

    Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
    Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
    In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
    An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
    iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
    Here are ways to view and edit the background movie:
    ◼ 
    Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
    (If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
    ◼ 
    Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
    The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
    You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
    NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie.

  • Why do new windows always open up pinned to the top left portion of my screen?

    I have disable the application frame in Photoshop CC and now all new windows open up in the top left corner of my screen BEHIND all of the brush and tool setting windows. How can I change this?

    Do you have your panels docked?
    Could you post a screenshot?

Maybe you are looking for