Windows 10 Technical preview wifi problems

wifi button on windows technical preview does not respond.It shows grey color.But After a restart or logging in after some days the problem vanishes magically. but after some days the problem comes back. Is there a problem with the driver?
I use HP 630 notebook dual boot with windows 7 and technical preview. wifi works fine in windows 7.

Hi Aakshh,
I search for information about HP 630 Notebook PC, it seems there is no driver released for Windows 8.1.
HP 630 Notebook PC
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5086783
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Generally, Windows 10 Technical Preview would work on the same hardware for Windows 8.1, in most situations, we can try the drivers for Windows 8.1 to install on Windows 10 Technical Preview.
From your description, it would be related to hardware driver. I would suggest your install the driver in Windows 7 compatibility mode to check the result.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
Windows will perform the install and request a restart.
While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
Anyone have any ideas?

So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
Windows will perform the install and request a restart.
While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
Anyone have any ideas?
Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
me the advanced repair options.
The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
out again. No real diagnostic info presented as to why.

Officejet Pro K550 in Windows Technical Preview

The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
Thanks

Hi,
Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Windows To Go Device using Windows Technical Preview

I have successfully made a Windows To Go Device by the steps in this Technet forum post:
http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
Flash Drive.
Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

Hi G.One1,
In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
Here is my thought and steps.
First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
Alex Zhao
TechNet Community Support

Adding features to Windows Technical Preview

Why serial code not work with Windows Technical Preview evalution copy Build 9879?
Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

Hi,
Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
Regards.
Yolanda Zhu
TechNet Community Support

Couldn't install windows technical preview on a usb flash

Hi,
couldn't install windows technical preview on a usb flash setup.
please say me the solution to this problem

Hi,
Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
Windows USB/DVD Download Tool
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
in Update & Recovery Menu (PC Settings)
Build 10036 announced by rumour mill...
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

Microsoft Community got there first...
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
Thanks Andre da Costa
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
We only reply to questions posted in TechNet forums.
We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
There is no such thing as who gets "there" first.

Problem installing Windows Technical Preview build 9926

I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

PH
Do you know that you can make an ISO to install 10041 and not have to install 9926?
http://microsoft-news.com/download-windows-10-build-10041-iso-image/
Wanikiya and Dyami--Team Zigzag

Windows 10 Technical Preview - Wifi Drivers

Anyone having an issue with wifi drivers on Windows 10? If so, please provide:
A description of the problem
Model and P/N
Wifi driver info
Thanks,

I have similar problem to above, but a different wireless adapter. Using T440s. Upgraded to windows 10 pro x64 and most things are working well however the wifi is very wonky. The T440s is in the same room as the router so signal strength is not an issue, and all was working well on windows 7 before upgrading. While there is connectivity, the throughput is fluctuating. It will be ok for a few seconds (6-10MB/s) then the connection will die and drop to 0MB/s. Then it will go really slow, 30-60KB/s, then perhaps it will climb back up to normal speeds. Sometimes it will just stay dead. I have noticed in the connection properties window the value for Speed is changing, this is something that I have never seen before. In the past, it was always "Speed: 300.0 Mbps" Now it's fluctuating to all sorts of different values, I've seen 300, 270, 150, 235, 27, 36, 210, it's all over the place. Here are some screenshots: https://dl.dropboxusercontent.com/u/98455184/Screenshot%202015-07-31%2022.05.02.png https://dl.dropboxusercontent.com/u/98455184/Screenshot%202015-07-31%2022.38.06.png Hopefully that will help someone point out what is wrong. When i connect through ethernet, all is good and full speed is constant. I have tried installing some different drivers, including the ones from lenovo driver page and some from the intel driver page, all have the same issue. The adapter is "Intel Dual Band Wireless 7260AC with Bluetooth 4.0" Have tried driver 18.11.0.8 from lenovo and also one from the Intel site, happens on both. :UPDATE: After looking at the readme for these drivers i seen this in the 'limitations' section: "Bluetooth and Wi-Fi radio are both operating on the same 2.4 GHz band. When both of them are used simultaneously, you may see slower communication speed and/or reduced communication range caused by radio interference." I have confirmed this is my issue, extensive testing shows consistently that when my bluetooth mouse is off the issue does not exist. Not sure how to proceed, I can't change my router to 5ghz as there are incompatible devices in the house.

Windows 10 to be free upgrade for first year for users of Windows Technical Preview?

Hello, in article I have read that will upgrade to Windows 10 users for free Win 7 & 8.1. I want to ask how it will be with those who use a version of the technical prewiev. I will also have a free update?
Thanks for the answers
Vít Repka

after 1 year if I do not want to purchase the upgrade, what happen to my computer, will go back to window 7?
What do you mean? You've already installed the Win 10 tech preview and you're wondering if it will automatically revert to the old software you were running some months ago after the trial period expires?
LOL
No.
Your expired Win 10 preview will pop up an "expired" notice and become less usable. Assuming it works like all other trial periods of Windows, it will limit its functionality and start shutting itself down every few hours. If you
want to revert it, it will be up to you to reinstall the old version. And then can anyone guarantee that it will reactivate properly?
Beyond that, and to the original point of this thread, what the mechanics will actually be for upgrading to Win 10 after its release on a system that was originally properly licensed for an earlier version of Windows are still not clear. We'd like
to hope that a product code for a legitimate licensed copy of an older version would just work to install Windows 10 from a DVD (ISO), but no doubt it will be more complicated than that. It shouldn't be, but it almost certainly will be.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

WUSB6300 - Windows 8.1 Wifi problems

I upgraded my computer to windows 8, and the device was working perfectly.
After the 8.1 update, it seems it can't hold a constant connection though.
It will connect and allow me to do different things at first, but shortly after it says my connection is "limited" and I can't connect to anything.
I ran the windows troubleshooter, and it just tells me to reset the router which I have done.
After I pull out the USB drive, it will work again, but only for a short while.
I updated the driver to a windows 8 driver, since I never did that when I upgraded to 8, and that still didn't work.
Changed the power management to make sure 8.1 wasn't turning it off to save power.
Uninstalled / Reinstalled
Done some "netsh" commands I found online.
Used both a specific DNS address, and automatic.
Nothing seems to be fixing the issue, anyone have any ideas?

Ive had the same problems. Constant disconnects. I get disconnected to online servers like live streams from twitch.tv and some games it will dsynch and disconnect me. Transfering files over my home network it will error out and stop the transfers. I called and ended up returning it because I thought it was defective and got a replacement adapter and it has the same issues so its a driver problem on their end. Ive tried it on multiple home computers and the same things happen. I was running windows 8 and now 8.1 with the same troubles. Ive also tried it in both USB 2.0 and 3.0 and it didnt help
I pretty much have given up on the adapter, Its sitting on the desk disconnected and im using my old TP-Link wireless adapter mainly for internet access and online gaming and only pluging in the linksys for home network transfers because its alot faster sending large files to my other PC.
Specs
16gb gskill ram
GTX 460 OC 1GB
Gigabyte GA-990FXA-UD3 motherboard
2TB HD seagate
Windows 8/8.1
Linksys EA6300 wireless router
Linksys WUSB6300 wireless adapter

Windows Technical Preview Build 9926 update

Hi,
I am trying to update my Windows 10 TP installation and it seems that it fails to download. I am behind a proxy server in the office with no way around it. Windows Update fails with error 0x80072ee2. What I have picked up is that I can
get the update list if I set a proxy server in BITS using "bitsadmin /util /setieproxy localsystem proxy1:port "bypass list". However bits fails to download the updates returning either Error or Transient_Error. Can you please assist
with this issue?
Regards,
Riaan
EDIT: I set proxy settings of each bits download job to PRECONFIG and the updates downloaded and installed.

Hi,
Did you set the proxy server via IE? Do you mean that the Windows Update Client ignore the proxy settings? To make Windows Update use the proxy setting, please execute the following command from cmd
Netsh winhttp import proxy source=ie
You can refer to this following KB for "how Windows Update finds proxy settings"
How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site
http://support.microsoft.com/kb/900935
Yolanda Zhu
TechNet Community Support

"Couldn't Install Windows Technical Preview"

I'm on the original install and have seen the above message several times, followed by
"We couldn't update the system reserved partition."
I dual boot with Windows7 on a seperate hdd. And I use EasyBCD as the switcher at boot-up.
Any help would be appreciated. Thanks
Paul

Why or how did "system reserved partition" get involved ?
All my dual booting had been done using this method.......
http://www.howtogeek.com/197647/how-to-dual-boot-windows-10-with-windows-7-or-8/
It works all the time. Want to give it a try ?

WM_INPUT message no longer sent in Windows Technical Preview build 9879?

I had software that relied on the WM_INPUT message and it used to work with previous builds (and Win 8.1). I needed it for remapping a wireless keyboard's fn key to CTRL key (I was using an Autohotkey script which captures WM_INPUT).
But now looking at the messages sent when typing in the keyboard in a win32 app, only the button down and up are being sent. What changed? how to work around it?
Now I am using a hacky combination of user32.dll's SendInput and some methods from setupapi.dll to read/send the special key values.

Hello ibalhashim,
From your description, do you mean that after remapping the fb to ctrl, then only the button down and up are being sent?
If it is, please share us how you have remapped the keys and please test if removing the remapping operations, the WM_INPUT message would restore. This would help narrow down this issue to see if it is caused by the remapping operations or the win32 app.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

[Feedback]: RSAT tool cannot be installed on Windows 10 technical preview GB and ZH verison

Hi,
Many users have problem in installing RSAT tool on Windows 10 Technical Preivew for Enterprise.
Here are my all tests results for now:
EN-US version:
Windows Technical Preview for Enterprise
RSAT installed OK
(Windows Technical Preview
RSAT installed OK)
EN-GB version
Windows Technical Preview for Enterprise
RSAT installed NOT OK
ZH-CN version
Windows Technical Preview for Enterprise
RSAT installed NOT OK
http://social.technet.microsoft.com/Forums/zh-CN/21934402-a449-4b61-8382-67539138f0c8/enterprise-edition-rsat-tools?forum=WinPreview2014General
it seems some prerequists check prevent this tool from installing on other language Windows 10 Technical Preview version:
http://www.microsoft.com/en-us/download/details.aspx?id=44280
Alex Zhao
TechNet Community Support

Hi,
Using REGEDIT it's necessary to create a DWORD value called 'AllowInsecureGuestAuth' in HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters and set this new value to 1. press F5 to refresh registry or reboot will also be necessary.
Similiar links
https://social.technet.microsoft.com/Forums/en-US/d1ae743a-6b39-4f68-a949-8e7127f84b53/not-able-to-access-network-shares-on-home-network?forum=WinPreview2014General
https://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/the-account-is-not-authorized-to-login-from-this/5aa0c61d-7e27-41ce-b1cd-1bedbe5c5ead?page=2
Yolanda Zhu
TechNet Community Support

Windows 10 Technical preview wifi problems

Similar Messages

Maybe you are looking for