Windows 10 TP x86 for Enterprise

Dear Sir/Mdm,
Pls tell me where can I download Windows 10 TP x 86 for Enterprise. (ie, 32-bit version)
Thank You.
Best regards,
Engch911

Dear Sir/Mdm, thank you for recommending me a link to download the required 32-bit Windows 10 TP x 86 for Enterprise.
I has tried to download it through TechNet using Akamai NetSessions Interface for more than 15 hours but it still would not tell whether the downloading is completed or not and so I gave up the downloading. Normally when I download 3GB data using
Free Downloader Manager, it takes about 10 hours. Akamai NetSessions Interface does not shows % of downloading, time left for downloading and so on.
Please tell me a better link or a method for downloading my required 32-bit Windows 10 TP x 86 for Enterprise.
Thank you.
Best regards,
Engch911
Unfortunately the download manager does not have a progress meter or any indication of a download with Chrome. I simply left it overnight and then the following morning installed it in a VM.
Chrome will nag if you close the download page, but that is all, no indication of an actual download. So leave it open if you are using Chrome like most are today
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Similar Messages

Installing administrative tools for Windows 10 Technical Preview for Enterprise

At first I was upgrade my Windows 8.1 to Windows 10 Technical Preview for Enterprise every things done will then
I try to install administrative tools for windows 10 technical preview for enterprise I found the .msu file from Microsoft website but when I tried to install it, it gives me the following error:
Windows Update Standalone Installer
installer encountered and error: 0x8024001d
is there anyone to help me regarding above issue.
Thanks
Zelgay Kunari

Hi zelgay,
This is my result:
From your error code, it seems this is relate to your windows update, please use following command to fix corrupted files:
DISM.exe /Online /Cleanup-image /Restorehealth
In the meantime, you can delete temporary update files in the SoftwareDistribution folder:
Stop Windows Update service.
Open File Explorer.
Double-click the local hard disk where Windows is installed, typically drive C.
Double-click the Windows folder, and then double-click the
SoftwareDistribution folder.
Double-click the DataStore folder to open it, and then delete all files and folders in the folder.
Note If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click the Back button. In the SoftwareDistribution folder, double-click the
Download folder to open it, and then delete all files in the folder.
Restart Windows Update service.
Alex Zhao
TechNet Community Support

Windows 10 Technical Preview for "Enterprise"?

What's different between "Windows 10 Technical Preview for Enterprise" and "Windows 10 Technical Preview"

Hi guys,
this might sound stupid, but how do I see if I have the Enterprise Technical Preview or the other one installed? I'm pretty sure I downloaded and installed the enterprise version, but I can't find any proof within the system itself? The System Information
just says "Windows Technical Preview".
Thanks
Stefan
Something like this but correct the path;
dism /get-wiminfo /wimfile:E:\Recovery\install.wim
If it doesn't say enterprise, its not.
Seems there are three installs that's ive seen.
Windows Technical Preview
Windows Technical Preview for Consumer
Windows Technical Preview for Enterprise
Thanks Mike, i no found out that i did not had the Enterprise Edition. Downloaded it now and even in Computer Information it says Enterprise now. Thank you.

Enrollement of windows 8 mobile devices for enterprise and antivirus

Dear All,
we want to give out 100+ devices to our corporate users. what is the best way to enroll the devices so that they don't use a single account registered with Microsoft but use corporate email addresses (for ownership) and allow users to download apps from
the store. We also have a mdm solution in trial. but to download the agent from the store it needs a Microsoft account and that's not good thing for so many devices..also users do have access to that Microsoft account
also what is the best enterprise antivirus solution for these devices.
regards,
Elisha Stephen

You can try using Intune, which does not require a download from the store.
Here's a link to the trial-
http://technet.microsoft.com/en-us/library/jj733628.aspx
You can provision Azure AD users for testing or use DirSync to test Intune with your current AD users.

BPC for NetWeaver OS requirement - Windows 2003 Standard vs. Enterprise

Hello BPC Expert,
I have a question in regard to the Windows Server 2003 edition for SAP BPC 7.0 for NetWeaver. On the Installation Guide of BPC NetWeaver SP03, the prerequisite for the Operating System for .NET Server component is Windows Server 2003 Enterprise Edition.
My question: will Windows Server 2003 Standard Edition work for .NET component? We have a budget concern as the Enterprise Edition will cost couple more thousands than standard.
Thank you,
Bomo

Hi,
Yes you can use the Windows Server 2003 Standard Edition (32-bit and 64-bit). Shouldnt be a problem.
Thanks.

Need U2ltdate.dll for Cyrstal Reports for Enterprise on 64 Bit systems

I am working through migrating older reports from a very outdated version of Crystal into a newer version and trialing Crystal Server 2013 with Crystal Reports for Enterprise. The only problem I am running into is that I have added the u2ltdate.dll to the correct folder inside of windows/system32 and in the program files(x86)/SAP BusinessObjects/SAP BusinessObjects Enterprise XI 4.0/win32_x86 and the win64_x64 as well just to be sure but I am still getting the following error in crystal reports: "UFL 'u2ltdate.dll' that implements this function is missing." Does anyone know what I am missing or if I need a different dll for 64 bit? Thanks!

hi Warren,
you may wish to look into replacing the formula code that calls this dll with built in date functions instead. please see your online help for more info on Date() functionality.
also, please see this post from Don Williams on using this dll in a 64 bit program. it deals with a 64 bit vs app but I am assuming that the necessity to recompile to 64 bit would be the same when trying to utilize the dll in 64 bit enterprise.
in this post Don also mentions that the source code is no longer available for the .dll and in that case you'd need to look at switching the formula syntax from referencing the dll to using built in functions.
-jamie

DB2 support for Crystal Reports for Enterprise And Unx errors

Hi,
I have a requirement to create a report in CrystalReports for Enterprise 4 sourcing data from Oracle 11 and IBM DB2 V9 databases. My first approach is to create relational connections for both the databases in the BO Repository (using Universe designer) and use them directley in the CR for Enterprise. Here I was able to create the two connections but unable to use the DB2 connnection in the report. I get the below error:
"The Database DB2V9 is not supported".
Is DB2 is a supported database for Crystal reports for Enterprise ??
My second approach is to create a multisource universe using IDT. Here when I try to create the Datafoundation layer, I get to see the tables from the DB2 databasae but When I expand the Oracle connection, I get this error: "conversion from UTF8 to charset failed: encoding not loaded".
Im unable to create a multisource universe at all no matter what connections I use.
Here is some additional info:
SAP BI4.1 SP1
Windows 2008 R2 servers
Oracle 11g
IBM DB2 V9.7
Any suggestions please!
Thanks,
Ravinder

Hi,
First of all I would strongly advice you to only use IDT for your universe development. The old Universe Designer is a legacy tool and should not be used unless you are using products that doesn't support IDT universes.
The issue you are facing for your Oracle connection is likely caused by a missing path variable.
Add "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win64_x64" to the PATH environment variables on the SAP Business Objects Enterprise server.
Restart the SIA
NOTE: Modify the path in case the SAP BusinessObjects Enterprise is installed in different folder.
Hope this helps.
Cheers,
Josh

Crystal Reports for Enterprise connection error to BI 4.0 Platform

Hi All
We are trying to connect Crystal Reports for Enterprise to our BI 4.0 Platform, however we are getting the following error: "Failed to establish a connection. The cause was: Cannot connect to SAP BusinessObjects Enterprise at this time. Please try again later".
System Information:
- SAP BI Platform 4.0 SP02 patch 6
- Windows Server 2008 R2 64bit
- Tomcat 6.0.24
We have also installed the following client software:
- SAP BI Platform Client Tools 4.0 SP02
- SAP Crystal Reports for Enterprise 4.0 SP02
- SAP BI Platform Client Tools 4.0 SP02 Patch 6
- SAP Crystal Reports for Enterprise 4.0 SP02 Patch 6
Our deployment of the BI Platform is a distributed system where
- Server 1 hosts the BI Platform Services and
- Server 2 hosts the web application server
We have reviewed the following OSS Notes below from SAP first to determine if there is a technical issue :
- 1598906 - Crystal Reports for Enterprise gives Cannot Connect to SAP Business Objects Enterprise at this time. Please try again later.
We have adjusted the "dsws.properties" as mentioned in the OSS note 1598906 above to contain the correct CMS and CMS port number (for Server 1).
- 1602024 - Error - Failed to establish a connection. The cause was - Cannot Connect to SAP BusinessObjects Enterprise at this time.
We have entered the server context as "/dswsbobje" mentioned in the OSS note 1602024 above in the connection details for CR for Enterprise connections
- 1636862 - Login for Crystal Reports fail on BO Server Cannot Connect to SAP Business Objects Enterprise at this time.
We have checked the proxy settings of Internet Explorer and adjusted it to have the following exceptions defined:
- Server 1.<domain_name>
- Server 2.<domain.name>
In the CMC, we also checked in the applications section for the web service option's access URL andchanged it from http://localhost:8080/dswsbobje to http://server2:8080/dswsbobje
We restarted the tomcat service and tried to access the CR for Enterprise from the BI Launch Pad as well as starting it directly from Windows, howevere we still get the same error.
Regards
Derek
Edited by: Derek Fox on Oct 27, 2011 1:07 PM
Edited by: Derek Fox on Oct 27, 2011 1:10 PM
Edited by: Derek Fox on Oct 27, 2011 1:11 PM
Edited by: Derek Fox on Oct 27, 2011 1:20 PM

Hi Anna-Marie
I apologise for only responding now back.
I have managed to logon successfully from Crystal Reports for Enterprise 2011 to the BI 4.0 Platform now, where we can create a report and save the report back to the BI Platform.
As we have a distributed system, where the BI Platform is on one server (Server1) and the WebAs on another server (Server2). We had to adjust thefollowing settings on the WebAs system.
1. On the WebAs server (Server 2), in the directory <install drive>:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps\dswsbobje\WEB-INF we changed the file: web.xml by entering the default CMS.
    <context-param>
        <param-name>cms.default</param-name>
        <param-value>Server2:6400</param-value>
    </context-param>
2.Then also in the directory <install drive>:\Program Files (x86)\SAP BusinessObjects\Tomcat6\webapps\dswsbobje\WEB-INF\classes we changed the file: dsws.properties where the section for domain=Server2 to domain=Server1 (example below from the file)
#default host for CMS and will be replaced during installationdomain=Server1:6400
3. In internet explorer's proxy exceptions, we set the following:
server1.<domain>*
server2.<domain>*
4. In the local Intranet setting, we also set the site as:
http://*.<domain>
Now for my laptop the connection works with no issues, but another developer's does not work - so we are busy investigating what is different between my laptop and his laptop.
Update:
We found that a setting inside the Crystal Reports for Enterprise 2011 in the network settings had to also be adjusted.
5. Use the menu path: Edit > Preferences > Network settings
6. Switch from "use system proxy configuration (if available)" to "Manual proxy configuration"
Enter the HTTP proxy address: proxy_server
Enter the Port: 80 (example)
Enter the list of servers to bypass: Server1;Server2
Check the checkbox "Enable proxy authentication"
Enter a username
Enter a password
Click on the OK button.
7. Afterward change the setting from "Manual proxy configuration" to "use system proxy configuration (if available)"
Then Crystal Reports for Enterprise 2011 works correctly.
What we found was that Crystal Reports for Enterprise 2011 must authenticate against the proxy server first otherwise one has issues.
Regards
Derek
Edited by: Derek Fox on Oct 28, 2011 2:02 PM
Edited by: Derek Fox on Oct 28, 2011 3:38 PM

Acrobat XI Pro Install via CCP Packager for Enterprise unuseable - tips for the unitiated

Well, after at least six weeks of trying to script and package Acrobat XI via the CCP packager for enterprise (Windows 7 X64) I have learnt many home truths which I thought I would share with the unitiated. This process, from the point of view of an IT admin who has to mass deploy this application to 680 PC's as part of an updated SOE has been the most painful scripting process I have ever found of any package (we successfully deploy Office, and Autodesk apps!). Not only that, but our entire State technical colleges have all purchased the same version. This will be affecting IT staff across a huge area, perhaps worldwide. Below are some some facts relating to this that I will share so others do not have to trawl the minefiled of dead-ends and confusion that is Adobe forums/official documentation. Apologies for not finding direct links to all of the below just yet but I've run out of time as we now have MANUALLY install Acrobat XI on all of these machines. When I get time I will post some of the links:
Facts:
Acrobat XI and Lightroom are NOT "CC" packages. Therefore they rely on a spearate serial numbers to install standalone without another major Adobe product (eg Photoshop) to be installed and then run first. Otherwise they will run in trial mode. If your organistaion is wanting to install these products I highly recommend seeing if Adobe can provide you with these.
Without the use of serial number for Acrobat XI this almost renders the Customisation Wizard effectively useless, none of the silent install switch will work with "Offline Exception"
Yes, one Adobe employee notes that you must install a major package before Acrobat but as the aoplogies for not fixing this were posted last August, we are still in the quandry of not having any useable fix except for the ridiculous "Exceptions" file and Exceptions installer.
If you run the Build and/or execeptions msi's it installs Acrobat twice, gold Adobe, gold.
http://forums.adobe.com/message/6039529#6039529 - look at this for a working script for Photoshop etc, it's great.Thanks to http://forums.adobe.com/people/PetriRiihikallio for posting this. However, alas, it cannot silently install Acrobat correctly (thus far).
It appears that the msi builder for CCP for enterprise is fatally flawed. I have never had as much problem with installing msi's - ever. For example, I have had to re-package the msi multiples times and many times simply running the msi will fail.
The idea that all major installs have to install the 32 bit version AND the 64 bit version is riduclous, enough said.
http://blogs.adobe.com/acrolaw/2013/02/acrobat-xi-deployment-guide-for-large-firms/ this guide may be useful for people who have been given a separate serial number.
http://helpx.adobe.com/acrobat/kb/known-issues-acrobat-xi-reader.html another useful link
I think for the time being I have now wasted enough time trying to tear my hair out with this. I will be waiting for Adobe to announce Acrobat and Lightroom CC. this will enable the correct deployment of a single app without having the bloat my SOE with unnecessary applications that most staff rarely use. Ahhh, I love a good manual install via VNC/RDP, don't you?

Hi Waltpenner and others, yes it can be very confusing and writing script after script got me even more confused.
Now, the story continues, after 6+ hours on the phone with Adobe Support...
When you install Adobe Acrobat XI it asks you to install the C++ Redistributable package and this is where the msi will STOP INSTALLING. even though the MSI says "complete"
Now you think to yourself, OK, I'll write a script to install this msi package no problems, solved.
Nope, the msi for Acrobat Pro XI will Still Halt even if you write this into the script along with halt no err or something similar in your code.
So what do you do?
When you create your msi in Cloud Packager, even though this feels completely against your better judgement tick the box under conflicting Process entitled "Ignore Conflicts and Continue installations" This will (finally) allow you to run the msi. Please see the wonderful deployment script above, which you may still need to edit to your needs (I did) - which I post once it's working perfectly.
You could then install the C++ redist from Microsoft at a later date ----> On that note however (thanks Microsoft for this gem) the Visual C++ redist is an msi for download, but it's actually a zip file calling an exe inside it. I suggest using the App Deploy Repackager to help you change registry entries if you need to install this, but choose your favourite tool (and no I'm not talking about that work colleague you don't like
Note: You will need to install this for certain features of Acro Pro XI to function, most of which relates to sever functions of Acrobat. I will post the exact reasons when I find them. Under pressure to get this deployed, I have not deployed this pckage as yet. Also, I'm unsure how Visual C++ will affect other major apps across my enterprise just yet.
Things to still consider
Acrobat still installs twice in the program directory (1.7GB nd 1.8GB respectively)
As all of the other CC packages are quite easy to install, Adobe needs to provide better service to it's enterprise customers by creating a proper version of Acrobat and Lightroom which is Acrobat CC and Lightroom CC, not version numbers tacked onto their new Cloud Service.
As for the above point I would still recommend creating the smallest msi packages you can, as large msi's that install a number of Apps (eg all of the web/image editing apps) take forever and quite often exhibit install errors
The amount of time I've spent on this is ridiculous, and we've had to package everything from Office to Autocad.
The amount of bandwidth I've chewed up is excessive, with package re-creation (download) of all the products probably about 100GB - however the ability to edit these packages with updates with the CCP is a good step forward.
Using the CCP through a proxy is horrendous, and complicated with the amount of exception through the servers you have to prvide (even then it rarely works).
The MSI packager still needs quite alot of work. As Petri states why he had to write a script like this when Adobe could have done the same thing is beyond him.
Adobe needs to trawl it's forum posts and take out the many false leads and dead ends provided by it's experts.
When I Think of anything else, or wite more scipts I'll let you all know.
Cheers,

CRYSTAL REPORT FOR ENTERPRISE ON ECC

Hi Everyone,
I have been trying to connect Crystal Report for Enterprise over ECC via universe as we don't have option
to connect CR4E directly to ECC.
So, I have made a universe in IDT and published it in repository.
Now, when I am using that universe in WebI Report and DashBoard then it is working fine but the same is throwing
the error while I am trying to connect with CR4E 'Failed to execute query: 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale'.
The same error 'Fail to create an instance of Job : com/businessobjects/i18n/locale/BoLocale' was also coming when we try to save the IDT with Secure Connections is set to Server Middleware(Window -> Preferences->Information Design Tool ->Secured Connections ->Server Middleware).
Regards,
Raghwendra

Hi,
As per the SAP Note 2022008 - Crystal Reports for Enterprise gives error with ERP Universe this is is the bug in
SAP Crystal Reports for Enterprise 4.1 Support Pack 3 Patch 1
SAP BusinessObjects Business Intelligence Platform 4.1 Support Pack 3 Patch 1
This issue has been reproduced at SAP and is found to be a bug (ADAPT01725424).
Solution
This issue has been fixed with BI 4.1 SP3 Patch3.
Regards,
Amit

The OMS is not set up for Enterprise Manager Security

Hi, I'm trying to add an agent to grid control and its not connecting with the management server because i cant secure it...
bash-2.05$ ../../bin/emctl secure agent <password>
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Agent is already stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS... Failed.
The OMS is not set up for Enterprise Manager Security.
i have tried this on two seperate servers, both do the exact same thing. However, on my repository server where the OMS is housed, i can secure the agent no problem. Does anyone know what the problem could be? My OMS is on a Linux (SuSE 10.2) 32-bit machine.
heres the emdctl.trc on the agent machine:
2007-07-11 11:00:20 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:21 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:21 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:00:22 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:00:22 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:05:10 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:05:10 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
2007-07-11 11:10:08 Thread-1 WARN http: snmehl_connect: connect failed to (cbldb3:3872): Connection refused (error = 239)
2007-07-11 11:10:08 Thread-1 ERROR main: nmectla_agentctl: Error connecting to http://cbldb3:3872/emd/main/. Returning status code 1
bash-2.05$ lsof | grep 3872
bash-2.05$
seems to be failing the connect but nothing is running on the port so i'm not sure why
Thanks in advance
Message was edited by:
user581869

some further information and hopefully someone can help me...
I went to the OMS binary folder (fmc45712:$OMS_HOME/bin) and executed the following commands...
$OMS_HOME/opmn/bin/opmnctl stopall
$OMS_HOME/bin/emctl stop oms
$OMS_HOME/bin/emctl secure oms
$OMS_HOME/bin/emctl start oms
$OMS_HOME/opmn/bin/opmnctl startall
then i go to $AGENT_HOME on the OMS machine (fmc45712:$AGENT_HOME/bin) and execute..
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /opt/oracle/OracleHomes/agent10g/sysman/config/emd.properties... Done.
Agent is secure at HTTPS Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is secure on HTTPS Port 1159
I then to go the server i deployed the agent on that i want to get communicating wtih my OMS...
$AGENT_HOME/bin/emctl status agent -secure
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Checking the security status of the Agent at location set in /u101/em/agent10g/sysman/config/emd.properties... Done.
Agent is unsecure at HTTP Port 3872.
Checking the security status of the OMS at http://fmc45712:4889/em/upload/... Done.
OMS is running but has not been secured. No HTTPS Port available.
same command, different computer, but on the same network, and it just doesn't work. The OMS is on Linux x86 and the agent on the alternate computer is on HP-UX. If anyone has any help it'd be much appreciated.

Windows 8.1 having same issue: Windows could not parse or process unattend answer file (C:\Windows\Panther\unattend.xml) for pass [specialize]. A component or setting specified in the answer file does not exist.

I know there are similar other issues with IE 10 and Windows 7. This is WINDOWS 8.1, and the IE Welcome message is totally absent from the default unattend.xml in the c:\windows\panther directory. In fact, I did a sysprep without using any injected
unattend.xml - this is the Microsoft Default!
So I suspect this will start appearing all over again soon. Anyone figure out what was causing it?
Here is the new Specialize section from the xml:
<settings pass="specialize">
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-Security-SPP-UX" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <SkipAutoActivation>true</SkipAutoActivation>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-SQMApi" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <CEIPEnabled>0</CEIPEnabled>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            
            <ComputerName>Win8</ComputerName>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x64.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
        <component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <RunSynchronous>
               
                <RunSynchronousCommand wcm:action="add">
                    <Description>Enable Admin Account</Description>
                    <Order>3</Order>
                    <Path>net user administrator /active:yes</Path>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Path>powercfg -h off</Path>
                    <Order>4</Order>
                </RunSynchronousCommand>
                <RunSynchronousCommand wcm:action="add">
                    <Order>5</Order>
                    <Path>cmd /c %WINDIR%\Setup\Specialize_x86.cmd</Path>
                </RunSynchronousCommand>
            </RunSynchronous>
        </component>
         <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
        <component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <BlockPopups>yes</BlockPopups>
            <CompanyName>FYM Inc</CompanyName>
            <DisableAccelerators>true</DisableAccelerators>
            <DisableDevTools>false</DisableDevTools>
            <DisableFirstRunWizard>true</DisableFirstRunWizard>
            <DisableOOBAccelerators>true</DisableOOBAccelerators>
            <DisableWelcomePage>true</DisableWelcomePage>
            <EnableLinksBar>false</EnableLinksBar>
            <FavoritesDelete>true</FavoritesDelete>
            <FilterLevel>High</FilterLevel>
            <Help_Page>www.google.com</Help_Page>
            <Home_Page>www.google.com</Home_Page>
            <LockToolbars>false</LockToolbars>
            <MSCompatibilityMode>false</MSCompatibilityMode>
            <NoDial>true</NoDial>
            <ShowCommandBar>true</ShowCommandBar>
            <ShowInformationBar>true</ShowInformationBar>
            <SuggestedSitesEnabled>false</SuggestedSitesEnabled>
            <SearchScopes>
                <Scope wcm:action="add">
                    <DisplayQuickPick>true</DisplayQuickPick>
                    <ScopeDefault>true</ScopeDefault>
                    <ScopeDisplayName>Google</ScopeDisplayName>
                    <ScopeKey>Search1</ScopeKey>
                    <ScopeUrl>http://www.google.com/advanced_search?hl=en</ScopeUrl>
                    <ShowSearchSuggestions>true</ShowSearchSuggestions>
                    <ShowTopResult>true</ShowTopResult>
                </Scope>
            </SearchScopes>
        </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-RemoteAssistance-Exe" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
                <fAllowFullControl>true</fAllowFullControl>
                <fAllowToGetHelp>true</fAllowToGetHelp>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
         <component name="Microsoft-Windows-ErrorReportingCore" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <DisableWER>1</DisableWER>
         </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
             
             
             
             
        </component>
        <component name="Microsoft-Windows-powercpl" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
             <PreferredPlan>8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c</PreferredPlan>
        </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
       <component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
           <Identification>
               <JoinWorkgroup>Workgroup</JoinWorkgroup>
           </Identification>
       </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
        <component name="Microsoft-Windows-AllUserInstallAgent" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <LogonWaitForPackageRegistration>false</LogonWaitForPackageRegistration>
        </component>
    </settings>
I'm thinking of dumping the entire IE section and see what happens.

I too received this error as I tried to run my first Windows 8.1 deployment. Per another post I commented out this line
<IEWelcomeMsg>false</IEWelcomeMsg>
from the IE section of the unattend.xml. I was then able to run my deployment. I do not see this line in your posting though.
I referenced this link even though it was for Windows 7.
http://social.technet.microsoft.com/Forums/en-US/c41a2b69-a591-4cd3-86ab-6a0f8a73b858/getting-windows-could-not-parse-or-process-the-unattend-answer-file-for-pass-specialize-with?forum=mdt
Hope this helps someone.
JayTheTech
To clarify, I edited the unattend.xml file from from Deployment Share, not C:\Windows\Panther.
DS\control\task sequence ID\unattend.xml
JayTheTech

CAN'T INSTALL ANY DRIVERS ON windows 10 pro x86 based system MODEL NO. HP G245 G3 NOTEBOOK

I have Installed windows 10 pro x86 based system on my G245 G3 notepad I can't find any drivers from HP website .
I have tryed win 8.1 pro 64 bit drivers but they are not working with win 10 pro 32 bit operating system.
please help me in this regard.
Thanks & Regards
I appreciate hp and its supports
Md Rayees Ahmad
consumer
This question was solved.
View Solution.

Hi,
Nearly all hardware vendors won't release drivers for Windows 10 until Windows 10 is officially released (not preview). Windows 10 should install drivers for your machine after few updates. Windows 10 can find all drivers (except one: finger print) for my 5 years old machine. It should be able to find drivers for newer machines).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can you use Crystal Reports for Enterprise to connect to BOE4 over the web?

Hello,
When I use Crystal Reports for Enterprise in BI Launchpad when I am connected on the LAN network it works.
If I connect via the internet, it doesn't.
I wanted to know if Crystal Reports for Enterprise only works if you are connected to Business Enterprise 4.0 on a LAN network and if it's not designed to work remotely, aka via the internet connection, like you can with Webi?
regards
Janetta

Hello,
We installed BOE4 on the server, it runs perfectly, no issues.
Install Crystal Reports for Enterprise on a laptop. It's the latest one as I checked to see if there's any later versions or patches.
I am able to log into the BOE Enterprise system as administrator.
Namely I have setup the Server connections per the following:
Server Name:   <IP address>
The check box for SSL is unchecked.
Server Port Number:   nnnn
Server Context: /dswsbobje
System display name:   <my server> External Connection
User Name : Administrator
It connects successfully.
I then go and create a report against a Universe that I can see listed on my BOE 4 server.
It then comes up with this error message:
"Unable to Logon: There is a problem logging on to SAP BusinessObjects Enterprise.
Please check your logon credentials and make sure your nework is properly configured before trying again.
If problems persist please contact your Administrator."
Architecture:
BOE 4 sits on Windows 2008 Server SP2
Laptops tried it on are Windows Vista and Windows 2003 Std.
Thanks for looking into this for me.
Edited by: Symonds Janetta on Oct 11, 2011 12:05 AM

USMT restore from Windows XP sp3 x86 to Vista x86 service pack 1 - USMT error code 36

Hi
We have been unable to restore user profile from Windows XP sp3 x86 to Vista x86 service pack 1 using USMT .
we keep receiving errors, see log below.
We have taken the backup from the windows xp several times, and Googled high and low for an answer - cannot get it to work.
We have used this sane command method on several windows xp to windows 7 migrations , without any issues.
please help
2014-06-11 14:50:18, Info                  [0x000000] LOADSTATE.EXE Version 6.2.9200.16384[gle=0x000000b7]
2014-06-11 14:50:18, Info                  [0x000000] USMT Started at 2014/06/11:14:50:18.626
2014-06-11 14:50:18, Info                  [0x000000] Command line: loadstate
\\backup\Profiles\Migration\Paul G /i:\\backup\Profiles\Migration\Paul G\migapp.xml /i:\\backup\Profiles\Migration\Paul G\miguser.xml /ue:*\* /ui:UNSWORTH\paulg /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log
/l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log
ï»¿2014-06-11 14:50:18, Error                 [0x000000] Only Windows 7 and Windows 8 are supported as destinations.[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] Unsupported OS Version: 6.0.6001.Service Pack 1[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] Failed.[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000]   Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] USMT Completed at 2014/06/11:14:50:18.628[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] * USMT error code 36: [gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] | Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info                  [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]

We are using
USMTGUI  5.0.3, which I understand uses latest version of windows USMT ( 6.3) .
When I try using USMT 6.2 from AIKTOOLS to restore the profile using this command , i get a different error. I have even tried adding /hardlink /nocompress and restoring profile from portable hard drive instead of NAS, and getting a different
error;
2014-06-12 11:53:21, Info [0x000000] USMT Started at 2014/06/12:11:53:21.897
2014-06-12 11:53:21, Info [0x000000] Command line: loadstate E:\conference-pc /i:E:\conference-pc\migapp.xml /i:E:\conference-pc\miguser.xml /ue:*\* /ui:UNSWORTH\administrator /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log /l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log /hardlink /nocompress
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\migapp.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\miguser.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Starting the migration process[gle=0x000000cb]
2014-06-12 11:53:22, Warning [0x080462] CListSysFileFilter::BuildTree: could not create FileList object for Z:\SFLISTLH.DAT: Win32Exception: \\?\Z:\SFLISTLH.DAT: The system cannot find the file specified. [0x00000002] __thiscall UnBCL::FileStream::FileStream(const class UnBCL::String *,enum UnBCL::FileMode,enum UnBCL::FileAccess,enum UnBCL::FileShare,unsigned long)
2014-06-12 11:53:24, Info [0x000000] System information:
Computer name: WIN-4Q9K3THYGWW
Machine SID: S-1-5-21-1202719645-4168933617-2382629769
OS version: 6.0.6002.Service Pack 2
Language: en-US
Architecture: 32-bit
Drives:
C: Type: Fixed, Bus type: ATA, Hotplug: No
D: Type: CD/DVD
E: Type: Fixed, Bus type: USB, Hotplug: Yes
Z: Type: Remote
F: Type: CD/DVD
Users:
WIN-4Q9K3THYGWW\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
UNSWORTH\administrator, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
WIN-4Q9K3THYGWW\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
2014-06-12 11:53:24, Info [0x000000] Processing the settings store
2014-06-12 11:53:24, Error [0x080000] HARDLINK: cannot find distributed store for c - 14f873cb-57a5-48c7-90d9-5d001c5625b6[gle=0x00000002]
2014-06-12 11:53:24, Error [0x0802e3] SelectTransport: OpenDevice failed with Exception: Win32Exception: HARDLINK: cannot find all distributed stores.: There are no more files. [0x00000012] void __thiscall Mig::CMediaManager::SelectTransportInternal(int,unsigned int,struct Mig::IDeviceInitializationData *,int,int,int,__w64 unsigned long,class Mig::CDeviceProgressAdapter *)
void __thiscall Mig::CHardLinkHelper::Open(class UnBCL::String *)[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Unable to open store at E:\conference-pc\USMT[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Failed to select store. Path: E:\conference-pc[gle=0x00000002]
2014-06-12 11:53:24, Warning [0x000000] Internal error 23 was translated to a default error
2014-06-12 11:53:24, Info [0x000000] Failed.[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] An error occurred during store access[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] USMT Completed at 2014/06/12:11:53:24.718[gle=0x00000091]

Windows 10 TP x86 for Enterprise

Similar Messages

Maybe you are looking for