Windows 10 upgrade and roll back limits?

Is there a limit on the number of times you can do the Windows 10 upgrade and roll back to 8.1? I would like to do the upgrade on my Thinkpad Yoga 14 but am concerned about the issues noted on here. I don't want to make too many attempts and lock myself out of the upgrade. I think I did see on here where someone tried 6 times. Thanks,Sue

So I'm in the same boat. My HP desktop that came insatlled with WIn 8.1 64-bit and it "upgraded" to WIn10 badly. WIn10 wont activate becasue it says my license code is blocked on the server, none of my installed apps or data came over and the receovey option will now only recover to WIn10, I have no option to go back to Win 8.1, thouhgh a windows.old dir is there on the C: drive. I have my Win 8.1 license code from before the "upgrade" attepmt, but there is no way with what WIn 10 left me with to revert back to Win 8.1. I went to the HP suppprt & downloads page to see if thre was WIn8.1 recovery media available as discussed here : http://support.hp.com/us-en/document/bph07143#AbT2 , but nothing shows up for my HP Pavilion 500-210qe CTO. Looks like both MS and HP got me good.

Similar Messages

How to Remove Windows 10 upgrade and go back to Win 8.1

(ENVY purchased with Windows 8.1 and MS office 2013.)Yesturday I installed Windows 10 upgrade. I immediately had issues. I couldn't open apps. I got an error message about license expired. I went to open Excel and MS office didn't exist. After a full day of trying to fix issues I have come to the resolve of "If its not broken don't fix it" I want to revert back to my Windows 8.1.The MS instructions say to go to Start and Settings. I have no Setting option.I made Recovery disk after I received it . Is there a way to do the microsoft procedure that uses the Windows.old or should I do a complete recovery.

So I'm in the same boat. My HP desktop that came insatlled with WIn 8.1 64-bit and it "upgraded" to WIn10 badly. WIn10 wont activate becasue it says my license code is blocked on the server, none of my installed apps or data came over and the receovey option will now only recover to WIn10, I have no option to go back to Win 8.1, thouhgh a windows.old dir is there on the C: drive. I have my Win 8.1 license code from before the "upgrade" attepmt, but there is no way with what WIn 10 left me with to revert back to Win 8.1. I went to the HP suppprt & downloads page to see if thre was WIn8.1 recovery media available as discussed here : http://support.hp.com/us-en/document/bph07143#AbT2 , but nothing shows up for my HP Pavilion 500-210qe CTO. Looks like both MS and HP got me good.

Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1

Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan

Cant stand the changes to my Maxx HD with the KitKat upgrade, text colors and keyboard terrible. How can I remove the upgrade and go back to what I had?

How can I remove this new Kitkat upgrade and go back to what I had. I cannot deal with the color on text screen and the keyboard is terrible. Can take back all the stupid pictures they added for texting. Just need it back to what it was.

Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT.

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6?

I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie

The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade.

Differences between Commit work, Logical Unit of Work and Roll back work

Hi all,
Can any one explain me in details what is the difference between Commit Work, Logical Unit of Work and Roll back work. Pls explain by providing some example.
and also explain me where and when these are used and what are the importance of using these.
Thanks in advance.
Regards
Ramana Prasad.T

Hi Ramana Prasad,
A Logical Unit of Work (LUW or database transaction) is an inseparable sequence of database operations which must be executed either in its entirety or not at all. For the database system, it thus constitutes a unit.
LUWs help to guarantee database integrity. When an LUW has been successfully concluded, the database is once again in a correct state. If, however, an error occurs within an LUW, all database changes made since the beginning of the LUW are canceled and the database is then in the same state as before the LUW started.
An LUW begins
o each time you start a transaction
o when the database changes of the previous LUW have been confirmed (database
commit) or
o when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends
o when the database changes have been confirmed (database commit) or
o when the database changes have been canceled (database rollback)
COMMIT WORK.
Executes a database commit and thus closes a logical processing unit or Logical Unit of Work ( LUW ) (see also Transaction processing ). This means that
all database changes are made irrevocable and cannot be reversed with ROLLBACK WORK and
all database locks are released.
COMMIT WORK also
calls the subroutines specified by PERFORM ... ON COMMIT * executes asynchronously any update requests (see CALL FUNCTION ... IN UPDATE TASK ) specified in these subroutines or started just before,
processes the function modules specified in CALL FUNCTION ... IN BACKGROUND TASK ,
cancels all existing locks (see SAP locking concept ) if no update requests exist,
closes all open database cursors (see OPEN CURSOR ) and
resets the time slice counter to 0.
COMMIT WORK belongs to the Open SQL command set.
Return code value
The SY-SUBRC is set to 0.
ROLLBACK WORK.
Closes a logical processing unit by reversing all database changes made since the last COMMIT .
You use this statement if you cannot be certain that all the database changes have been executed correctly.
The update routines are not performed.
ROLLBACK WORK belongs to the Open SQL command set.
Note
If the ROLLBACK statement occurs within a SELECT loop, the processing cannot continue because the database cursor is invalid. After the ROLLBACK statement, you should therefore ensure that all SELECT processing has been explicitly terminated.
<b>Plz. Avoid Duplicate Threads.</b>
Hope this resolves your query.
Reward all the helpful answers.
Regards

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?

The install wizard stops and "rolls Back" the install and just gives the attached notice of the install error...how can this be corrected?
The notice is inserted first and the stopping point is second.

Da ich gar kein Englisch kann kann ich auch nicht sagen was sie mir
geschrieben haben ich kann nur Vermuten was das sein soll es tut mir leid
aber ich kann ihnen keine Konkreter Antwort geben alle Sprechen Englisch
nur ich nicht mehr kann ich dazu nicht sagen
Constantin Preda
2015-02-12 21:45 GMT+01:00 Claudio González <[email protected]>:
The install wizard stops and "rolls Back" the install and just gives
the attached notice of the install error...how can this be corrected?
created by Claudio González
<https://forums.adobe.com/people/Claudio+Gonz%C3%A1lez> in Adobe Reader
- View the full discussion
<https://forums.adobe.com/message/7189357#7189357>

PSE 9 install fails during Shared Technologies and rolls back

I've bought and am getting fed up with trying and failing to install PSE9.
It fails during the install of 'Shared Technologies and rolls back.
I've unpacked the logs as per instructions and the error messages at the end are:
- 0 fatal error(s), 5 error(s), 3 warning(s)
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Elements Camera Raw: Install failed
ERROR: - AdobeHelp: Install failed
ERROR: - ElementsSTIInstaller: Install failed
ERROR: - Adobe ExtendScript Toolkit CS5: Install failed
I've looked through the forums for possible causes:
1) Adobe Bridge process running in background - according to task manager, the only Adobe process running relates to Flash
2) Path problems - I've moved the install files and re-extracted them to a folder in C: with the same results.
I then tried installing the loganalyser but that failed as well!
I have attached the compressed log file.
I am riunning Win 7 Home Premium (x64)
Help please!
Steve

See if any of the solutions here help:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html

ORA-06519: active autonomous transaction detected and rolled back

I am getting this error. when i am doing insert from my package Any solution to reslove this issue
ORA-06519: active autonomous transaction detected and rolled back . thanks
I am doing select - insert...

Also, if you have any exception handler sections in the code,
then you have to add a commit or rollback statement for
every exception that is handled.

Commit work and roll back with simple language and simple example

hi guru
commit work and roll back with simple language and simple example

Hi,
The statement COMMIT WORK completes the current SAP LUW and opens a new one, storing all change requests for the current SAP LUW in the process. In this case, COMMIT WORK performs the following actions:
It executes all subroutines registered using PERFORM ON COMMIT.
The sequence is based on the order of registration or according to the priority specified using the LEVEL addition. Execution of the following statements is not permitted in a subroutine of this type:
PERFORM ... ON COMMIT|ROLLBACK
COMMIT WORK
ROLLBACK WORK
The statement CALL FUNCTION ... IN UPDATE TASK can be executed.
ROLL BACK:
The statement ROLLBACK WORK closes the current SAP-LUW and opens a new one. In doing so, all change requests of the current SAP-LUW are canceled. To do this, ROLLBACK WORK carries out the following actions:
1) Executes all subprograms registered with PERFORM ON ROLLBACK.
2) Deletes all subprograms registered with PERFORM ON COMMIT.
3) Raises an internal exception in the Object Services that makes sure that the attributes of persistent objects are initialised.
4) Deletes all update function modules registered with CALL FUNCTION ...IN UPDATE TASK from the VBLOG database table and deletes all transactional remote Function Calls registered with CALL FUNCTION ... IN BACKGROUND TASK from database tables ARFCSSTATE and ARFCSDATA.
5) Removal of all SAP locks set in the current program in which the formal parameter _SCOPE of the lock function module was set to the value 2.
6) Triggers a database rollback, which also ends the current database-LUW.

Restore Computer Back to Vista after Windows 7 upgrade and back again?

I got Satellite L505-S6946 that came with Vista Home Premium installed (I immediately made backup-5 disks in all). I got the free Windows 7 upgrade disk from Toshiba and upgraded my laptop. I messed up and did not make the backup disks like I should have. I had to reinstall windows 7 more than once (shouldn't let others use my computer!) and it hasn't seem to run quite the same after reinstall. I also noticed that for a driver Intel ICH9 Family SMBus Controller 2930 it says no device driver installed. I didn't notice that before. And I have tried to install it. Whatever the cause, to me it just doesn't seem to run the same. I was wondering if I could go back and reinstall Vista from my disks and then upgrade to windows 7 with my upgrade again (and this time make backup copy!)? I apologize in advance if this is a stupid question but I am not really computer savvy. Thank You. Jakey58

Satellite L505-S6946
Just adding my two cents worth...
We have lots of machines running Windows Vista. (I'm typing this message on one.) They work just fine. I never even consider upgrading them to Windows 7.
Just because the Geeks don't like Vista and just because Microsoft wants you to use the latest and greatest doesn't mean you must upgrade.
I've heard some people put solar panels on the shady side of the house where the neighbors can see them.
-Jerry

It will not let me install Itunes 1.6.1 on my Windows 7 OS and keeps coming with an error and rolls back, what can i do?

Everytime i tried to update my i tunes to 1.6.1 it wouldn't let me and came up with this error.
I'd hit OK then it would roll back and start again and end with this error
Anything i can do?

These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80070002, or some other number? (If they're another number, what number are you getting?)

Windows 8.1 and Wireless showing 'limited'

Hi there,
I have a bought 2 HP Pavillion 500-152ea Desktop computers and need to connect with wireless to a router.
The computers were bought for our business and it has been a dissappointing start.
I have installed windows 8.1 and it has now caused major problems with the wireless connection.
The wireless connection is now being shown as 'limited' and no internet access is allowed.
Can you help me find a solution to this please?
Regards,
K

Hello hassy79,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having wireless issues after upgrading to Windows 8.1. I would recommend that you restore your computer back to Windows 8 and ensure that ALL Windows Updates and HP Updates have been installed before you install Windows 8.1. I have seen this issue many times and it results in a wireless issue.
As well when you do the Windows 8.1 upgrade go into your Device Manager and disable the wireless card. After the update has been install go back and re-enable it.
You will find the latest drivers for your computer running Windows 8.1 on the HP Pavilion 500-152ea Desktop PC Drivers page as well.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Windows 8 upgrade and Office 2013

I recently upgraded my laptop to Windows 8.1 and my previously installed office 2013 now no longer works and the product key is invalid! Any suggestions? Have contacted Microsoft
and they haven't been very helpful.
Viv Haig

Hi,
The Activation Wizard will appear if your hard drive has
changed a lot.
Check your product key and retype it. If you are sure that you type it correctly and still can’t activate Office, please do a phone activation in Office. The phone activation process will provide you with the appropriate phone number
to call. Explain to the service (Human being) that you can’t activate your Office.
You can find your local custom support number on the link below:
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Windows 7 upgrade and existing Windows Vista Home Premium license...?

Hi,
As per Lenovo's scheme, after applying for Windows 7 64 bit upgrade and upon receiving the installer DVD, do I need to compulsorily install it?
Does "upgrade" here really mean that the day when the Windows 7 DVD was issued on my name, my existing Windows Vista Home Premium 64 bit license will become Invalid or get expired? Or I can continue using my existing installed Windows Vista on my Laptop and install the received copy of Windows 7 as and when I want or even don't install it on my Laptop, if happy using existing Windows Vista only?
Regards,
Aniket Dumbare

More Information
I just found instructions to run "BCDEdit" and the results were the following so it looks like the "Boot Manager" is on S while the "Boot Loader" is on C (Whatever that means)
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>Bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=S:
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {2164a006-c421-11de-8836-de5db8963170}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device partition=C:
path \Windows\system32\winload.exe
description Windows 7
locale en-US
inherit {bootloadersettings}
recoverysequence {2164a008-c421-11de-8836-de5db8963170}
recoveryenabled Yes
osdevice partition=C:
systemroot \Windows
resumeobject {2164a006-c421-11de-8836-de5db8963170}
nx OptIn
C:\Windows\system32>

Windows 10 upgrade and roll back limits?

Similar Messages

Maybe you are looking for