Windows 10 Upgrade Failed with error code 80004005

OK, I have downloaded Windows 10 Upgrade and it all goes well until the computer restarts. Once it boots up again, the upgrade does not continue and I just go back to Windows 8.1. I then see error code # 80004005 for the upgrade in the Windows Update history. I do not know what is going on. I read on HP's Notebook upgrade page I found the following:For computers with available storage of 128 GB or less, the upgrade might require you to provide a USB hard drive (32 GB or larger). HP does not recommend using an SD card.If your computer has less than 128 GB of free hard drive space you will be prompted to connect a USB hard drive to continue with the installation. Use a blank USB hard drive 32 GB or larger. When the installation is complete, Windows 10 Upgrade will copy the windows.old file to the USB hard drive. Keep this file on the USB hard drive. It will be required to Go Back to the previous operating system if necessary.My computer definately fits in that criteria since it is equiped with a 128GB SSD. When I start the upgrade, I do not get prompted for an external hard drive. I have also tried the Media Creation Tool and ISO/USB and get the "Windows 10 Installation has Failed" error.

The system reserved partition serves a purpose. If it is deleted, then the OS will not boot back up. In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

Similar Messages

Windows 8.1 upgrade fails with error code 0x80070057

I have attempted to upgrade Windows 8 Pro (Msdn) to 8.1. The install gets as far as 'Applying changes, then comes up wiith the extremely helpful error message 'The application wasn't installed'. Clicking on view details gives, the equally helpful,
'Something happened and Windows 8.1 couldn't be installed> Please try again. Error Code: 0x80070057.
What is going on here?
On a second note, I have two PCs running Windows 8. One of them had the upgrade on offer this morning, the other didn't. Curiouser and curiouser.

Hi,
Please refer to this article before you upgrade to windows 8.1:
Update to Windows 8.1 from Windows 8
http://windows.microsoft.com/en-us/windows-8/update-from-windows-8-tutorial
if the process still fails, try to upload the cbs.log and windowupdate.log.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Update KB3033929 fails with error code 80004005

Security Update for Windows 7 for x64-based Systems (KB3033929)
Installation date: ‎3/‎11/‎2015 8:57 AM
Installation status: Failed
Error details: Code 80004005
Update type: Important
A security update. . .
I can't find any info on this error. Tried the update twice and both times it failed.

OK, I ran it again.. and I think this is the relevant part of the +200M log. It does seem to have something to do with the boot manager or knowing which drive is the 'globalroot', perhaps.
2015-03-13 08:33:13, Info CSI 0000003d Begin executing advanced installer phase 38 (0x00000026) index 16 (0x0000000000000010) (sequence 55)
Old component: [ml:360{180},l:358{179}]"Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Culture=neutral, Version=6.1.7601.18741, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
New component: [ml:360{180},l:358{179}]"Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Culture=neutral, Version=6.1.7601.17514, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
Install mode: install
Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
Installer name: [15]"Generic Command"
2015-03-13 08:33:13, Info CSI 0000003e Performing 1 operations; 1 are not lock/unlock and follow:
LockComponentPath (10): flags: 0 comp: {l:16 b:9c8942df895dd0011800000074043c05} pathid: {l:16 b:9c8942df895dd0011900000074043c05} path: [l:238{119}]"\SystemRoot\WinSxS\amd64_microsoft-windows-b..re-memorydiagnostic_31bf3856ad364e35_6.1.7601.18741_none_3637d03b1b5800bc" pid: 474 starttime: 130707235496916126 (0x01d05d89c55df49e)
2015-03-13 08:33:13, Info CSI 0000003f Performing 1 operations; 1 are not lock/unlock and follow:
LockComponentPath (10): flags: 0 comp: {l:16 b:9c8942df895dd0011a00000074043c05} pathid: {l:16 b:9c8942df895dd0011b00000074043c05} path: [l:238{119}]"\SystemRoot\WinSxS\amd64_microsoft-windows-b..re-memorydiagnostic_31bf3856ad364e35_6.1.7601.17514_none_365b53d91b3ce4ff" pid: 474 starttime: 130707235496916126 (0x01d05d89c55df49e)
2015-03-13 08:33:13, Info CSI 00000040 Calling generic command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
CmdLine: [47]""C:\Windows\bfsvc.exe" C:\Windows\boot /nofonts"
2015-03-13 08:33:45, Error [0x018009] CSI 00000041 (F) Done with generic command 3; CreateProcess returned 0, CPAW returned S_OK
Process exit code 112 (0x00000070) resulted in success? FALSE
Process output: [l:8995 [4096]"BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 1 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 2 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 3 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 4 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 5 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 6 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 7 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 8 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 9 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 10 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 11 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 12 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\Harddis[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI kVolume1\Boot\bootmgr) failed! (Attempt 13 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 14 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 15 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 16 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 17 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 18 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 19 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 20 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 21 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 22 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 23 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 24 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 25 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 26 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 27 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed!"[4096]" (Attempt 28 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 29 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 30 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 31 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 32 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 33 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 34 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 35 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 36 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 37 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 38 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 39 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 40 of 60) Last Error = 0x[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI 70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 41 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 42 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 43 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 44 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 45 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 46 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 47 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 48 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 49 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 50 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 51 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 52 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 53 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) fail[gle=0x80004005]
2015-03-13 08:33:45, Error [0x018009] CSI ed! (Attempt 54 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 55 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALR"[803]"OOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 56 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 57 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 58 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 59 of 60) Last Error = 0x70
BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 60 of 60) Last Error = 0x70
BFSVC: Error copying boot files from C:\Windows\boot\PCAT to \\?\GLOBALROOT\Device\HarddiskVolume1\Boot! Last Error = 0x70
"][gle=0x80004005]
2015-03-13 08:33:45, Info CSI 00000042 Calling generic command executable (sequence 4): [24]"C:\Windows\fveupdate.exe"
CmdLine: [35]""C:\Windows\fveupdate.exe" /memtest"
2015-03-13 08:33:45, Info CSI 00000043 Done with generic command 4; CreateProcess returned 0, CPAW returned S_OK
Process exit code 0 resulted in success? TRUE
Process output: [l:248 [248]"BitLockerUpdate: Running.
BitLockerUpdate: Service request is for memtest.exe.
BitLockerUpdate: BitLocker Drive Encryption is not turned ON on the OS volume.
BitLockerUpdate: No servicing was performed on the OS volume.
BitLockerUpdate: Done.
Edit: One thing I've noticed on that PC, the 'system reserved' partition is only 25M, versus the usual 100M. I might try to boot using the recovery console and see what happens.

Windows updates failed with error code 9c48

i have a WSUS sevrer and servers that have windows server 2008 r2 , many of them failed with the attached error , the update that caused this is Internet Explorer 11 for Windows Server 2008 R2 for x64-based Systems , and after i checked the
internet explorer its already have IE11 , i tried to do the following troubleshooting with no luck :
1- sfc /scannow : no errors found
2- wuauclt /detectnow
wuauclt /reportnow
3- stopped the windows update service and cleared the windows updates files and started it again with the same problem
any advice for this please

Hi Ghaith,
Please remove the IE11 first, then try to install this update.
Also, we may try to install the update manually, to download the update file, please click the link below:
http://catalog.update.microsoft.com/v7/site/Home.aspx
If issue persists, please disconnect the internet, then install the update again.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Labview 2009 install on windows 7 fails with error code 1935

Hello all,
I have problems installing LV9 on my windows7 machine.
It always ends with:
Any ideas would be welcome.
Thanks
Albert

Since it is not simple to reinstall only .net framework on W7 (it is part of the operating system),
I checked the .net framework with the .NET FRAMEWORK VERIFICATION TOOL
( http://blogs.msdn.com/astebner/pages/8999004.aspx.)
Verification succeeded for .net 2.0,3.0 and 3.5.
Since there are more problems on this pc. (1:windows update problems with strange errorcodes, 2:unable to turn windows features on/of)
i decided to rerun the W7 setup.
i selected the upgrade option , assuming this would update corrupted files, and it did.
After that LV9 installed without problems.
Albert

Mssql 2005 express SP4 upgrade fail with error code 1603

The patch install through windows update is fail, then I do it manually, SQL server Database Services setup failed.
Here is the setup log
Property(S): USERNAME = Windows User
Property(S): PackagecodeChanging = 1
Property(S): ProductToBeRegistered = 1
Property(S): ProductState = 5
Property(S): TRANSFORMS = :SqlRun01.mst;:InstID01.mst;:InstName01.mst
Property(S): PackageCode = {49616E1E-6C6B-4938-B811-352C355EFDCE}
Property(S): MsiLogFileLocation = C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_W2K8FS_SQL.log
Property(S): AdministratorsGroup = BUILTIN\Administrators
Property(S): UsersGroup = BUILTIN\Users
Property(S): ModuleID_SYSDB2 = 75D79626_87FB_4E9A_B07F_87DAE18D0F36
Property(S): TempFolder = C:\Users\admin\AppData\Local\Temp\
Property(S): WindowsFolder = C:\Windows\
Property(S): CommonFilesFolder.D9BC9C10_2DCD_44D3_AACC_9C58CAF76128 = C:\Program Files (x86)\Common Files\
MSI (s) (B0:F8) [11:55:54:332]: Note: 1: 1729
MSI (s) (B0:F8) [11:55:54:332]: Product: Microsoft SQL Server 2005 Express Edition -- Configuration failed.
MSI (s) (B0:F8) [11:55:54:333]: Windows Installer reconfigured the product. Product Name: Microsoft SQL Server 2005 Express Edition. Product Version: 9.4.5000.00. Product Language: 1033. Reconfiguration success or error status: 1603.
MSI (s) (B0:F8) [11:55:54:355]: Deferring clean up of packages/files, if any exist
MSI (s) (B0:F8) [11:55:54:355]: MainEngineThread is returning 1603
MSI (s) (B0:40) [11:55:54:356]: RESTART MANAGER: Session closed.
MSI (s) (B0:40) [11:55:54:356]: No System Restore sequence number for this installation.
=== Logging stopped: 1/10/2012 11:55:54 ===
MSI (s) (B0:40) [11:55:54:358]: User policy value 'DisableRollback' is 0
MSI (s) (B0:40) [11:55:54:358]: Machine policy value 'DisableRollback' is 0
MSI (s) (B0:40) [11:55:54:358]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B0:40) [11:55:54:359]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B0:40) [11:55:54:360]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B0:40) [11:55:54:360]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B0:40) [11:55:54:360]: Restoring environment variables
MSI (s) (B0:40) [11:55:54:361]: Destroying RemoteAPI object.
MSI (s) (B0:AC) [11:55:54:361]: Custom Action Manager thread ending.
MSI (c) (04:88) [11:55:54:364]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (04:88) [11:55:54:366]: MainEngineThread is returning 1603
Please help.... Thanks~~

Thanks your quick reply,
As I checked before, the version is 9.3.4035
Please check the summary.txt
Microsoft SQL Server 2005 9.00.5000.00
==============================
OS Version : Service Pack 2 (Build 6002)
Time : Tue Jan 10 11:52:15 2012
w2k8fs : 64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Machine : w2k8fs
Product : Microsoft SQL Server Setup Support Files (English)
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLSupport_1.log
Machine : w2k8fs
Product : Microsoft SQL Server Native Client
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQLNCLI_1.log
Machine : w2k8fs
Product : Microsoft SQL Server VSS Writer
Product Version : 9.00.5000.00
Install : Successful
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SqlWriter_1.log
Machine : w2k8fs
Product : SQL Server Database Services
Error : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Machine : w2k8fs
Product : Microsoft SQL Server 2005 Express Edition
Product Version : 9.4.5000.00
Install : Failed
Log File : C:\Program Files (x86)\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0003_w2k8fs_SQL.log
Last Action : SetInstanceProperty
Error String : The setup has encountered an unexpected error while Setting Internal Properties. The error is: Fatal error during installation.
Error Number : 29528
SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.

Upgrade from 8 to 8.1 fails with error code 0x80070004

My repeated attempts to upgrade from Windows 8 to Windows 8.1 to prepare for the upgrade to Windows 10 fails with error code 0x80070004. Is anyone familiar with this problem and aware of a solution?

Several suggestions in the links below https://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_install/windows-81-installation-error-0x80070004/970909c3-e03e-4cd6-ac09-97d3dea3cc62?auth=1 http://superuser.com/questions/666147/why-do-i-get-error-0x80070004-when-trying-to-update-to-windows-8-1-from-windows

Windows 7 SP1 x32 bit fail to install Windows SP 1 with error code: 0x80070643/0x800F0829

Hi All,
I'm unable to install MS Service Pack 1 in Windows 7 Professional 32 bit, failing with error code: 0x80070643/0x800F0829.
1. Remove Symantec Endpoint Protection.
2. Run System Update Readiness Tool
3. Install MS SP 1 and fails.
Here is the log file.
https://onedrive.live.com/redir?resid=7627981B9D84362B%211869
Thanks,

Hi,
I suggest you download the full package, and try to install it in Clean boot Mode:
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
http://www.microsoft.com/en-in/download/details.aspx?id=5842
If the issue still persists, please try following command to repair Windows:
SFC /scannow
You can also try the In-place upgrade to clean your Windows and install the update again:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
Kate Li
TechNet Community Support

ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

Hi All,
I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
If anyone could assist with this is would be much appreciated.
Many thanks
Logs below:
<![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
<![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
<![LOG[Raising event:
instance of CCM_PolicyAgent_SettingsEvaluationComplete
ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
DateTime = "20141218122103.273000+000";
PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
ProcessID = 1748;
ThreadID = 1752;
]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
<![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
<![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
<![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
<![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
<![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
<![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
<![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
<![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
<![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
<![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80 CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
thread="1752" file="libsmsmessaging.cpp:8422">
<![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
<![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
<![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
<![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
<![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
<![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
<![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
file="tsmanagerutils.cpp:118">
<![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
<![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
<![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
file="tsmanagerutils.cpp:165">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
<![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
<![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
<![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
<![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
<![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
<![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

4005 can mean a few things, Some common can be The wrong BIOS time, or a a bad Hard drive. look at those two first.

Upgrade to Windows 10 failed with error 80070714. Please Help!!!

Hi. I hope someone out there can help me!! I have tried numerous times to upgrade my HP Envy 15-K204NA from Windows 8.1 64-bit to Windows 10 Home, but it continues to fail with error code 80070714. I am using Bullguard Premium Protection and have Acronis True Image installed. I have disabled SQL services as suggested by other posts on the internet, but nothing seems to work. When I run the upgrade from a DVD burned from the ISO, it gets to 37% and then fails. Hope you can help. (fingers crossed!!) Chris The Setup Error log file shows: 2015-08-05 16:48:34, Error                        CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:37, Error                        CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-05 16:48:49, Error                 CONX   Failed to initialize net class data 800700052015-08-05 16:48:50, Error                 CONX   Failed to get class data from printer 800700572015-08-05 16:49:21, Error                 CONX   Failed to open INF file [tib_mounter.x64.inf] with 0x800700022015-08-05 16:49:21, Error                 CONX   Failed to initialize driver package [tib_mounter.x64.inf]2015-08-05 16:49:21, Error                 CONX   Failed to open INF file [oem46.inf] with 0x800700022015-08-05 16:49:21, Error                 CONX   Failed to initialize driver package [oem46.inf]2015-08-05 16:49:23, Error                 CONX   Failed to open INF file [tib_mounter.x64.inf] with 0x800700022015-08-05 16:49:23, Error                 CONX   Failed to initialize driver package [tib_mounter.x64.inf]2015-08-05 16:49:23, Error                 CONX   Failed to open INF file [oem46.inf] with 0x800700022015-08-05 16:49:23, Error                 CONX   Failed to initialize driver package [oem46.inf]2015-08-05 17:06:14, Error                 SP     RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM at SP_HIVE_LOAD_ALIAS_SYSTEM[gle=0x801f0005]
2015-08-05 17:06:14, Error                 SP     SPMountOfflineHive: Can't mount offline hive: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005[gle=0x801f0005]
2015-08-05 17:06:14, Error                 SP     CEnableTelemetryForImage:oExecute: Cannot load the system hive for the offline OS C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS. Error: 0x801F0005[gle=0x801f0005]
2015-08-05 17:06:14, Error                        [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2015-08-05 17:06:19, Error                 SP     Using current time as Recovery Timestamp.
2015-08-05 17:06:22, Error                 SP     Failed to open WinPE DISM session. Error: 0x80070714[gle=0x0000007a]
2015-08-05 17:06:22, Error                 SP     Operation failed: Process Drivers for Migration. Error: 0x80070714[gle=0x000000b7]
2015-08-05 17:06:22, Error                 MOUPG MoSetupPlatform: ExecuteCurrentOperations reported failure!
2015-08-05 17:06:22, Error                 MOUPG MoSetupPlatform: Using action error code: [0x80070714]
2015-08-05 17:06:22, Error                 MOUPG CDlpActionDriverMigrate::ExecuteRoutine(544): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CDlpTask::ExecuteAction(3243): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CDlpTask::ExecuteActions(3397): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CDlpTask::Execute(1631): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CSetupManager::ExecuteTask(1953): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CSetupManager::ExecuteTask(1916): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CSetupManager::ExecuteInstallMode(736): Result = 0x80070714
2015-08-05 17:06:24, Error                 MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x80070714
2015-08-05 17:07:09, Error                 MOUPG CSetupManager::Execute(222): Result = 0x80070714
2015-08-05 17:07:09, Error                 MOUPG CSetupHost::Execute(370): Result = 0x80070714
2015-08-05 17:07:12, Error                 MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

Hi Mumbodog and thanks for your reply. I have uninstalled Bullguard and tried the upgrade again, but it failed at the same point. I have also removed Acronis True Image and again it failed!! The log file has fewer lines now, so it has helped, but still no upgrade: 2015-08-06 09:16:30, Error                        CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-06 09:16:33, Error                        CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
2015-08-06 09:17:14, Error                 CONX   Failed to initialize net class data 80070005
2015-08-06 09:17:15, Error                 CONX   Failed to get class data from printer 80070057
2015-08-06 09:23:52, Error                 SP     RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM at SP_HIVE_LOAD_ALIAS_SYSTEM[gle=0x801f0005]
2015-08-06 09:23:52, Error                 SP     SPMountOfflineHive: Can't mount offline hive: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005[gle=0x801f0005]
2015-08-06 09:23:52, Error                 SP     CEnableTelemetryForImage:oExecute: Cannot load the system hive for the offline OS C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS. Error: 0x801F0005[gle=0x801f0005]
2015-08-06 09:23:52, Error                        [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) returning 0X2
2015-08-06 09:23:56, Error                 SP     Using current time as Recovery Timestamp.
2015-08-06 09:23:59, Error                 SP     Failed to open WinPE DISM session. Error: 0x80070714[gle=0x0000007a]
2015-08-06 09:23:59, Error                 SP     Operation failed: Process Drivers for Migration. Error: 0x80070714[gle=0x000000b7]
2015-08-06 09:23:59, Error                 MOUPG MoSetupPlatform: ExecuteCurrentOperations reported failure!
2015-08-06 09:23:59, Error                 MOUPG MoSetupPlatform: Using action error code: [0x80070714]
2015-08-06 09:23:59, Error                 MOUPG CDlpActionDriverMigrate::ExecuteRoutine(544): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CDlpActionImpl<class CDlpErrorImpl<class CDlpObjectInternalImpl<class CUnknownImpl<class IMoSetupDlpAction> > > >::Execute(441): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CDlpTask::ExecuteAction(3243): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CDlpTask::ExecuteActions(3397): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CDlpTask::Execute(1631): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CSetupManager::ExecuteTask(1953): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CSetupManager::ExecuteTask(1916): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CSetupManager::ExecuteInstallMode(736): Result = 0x80070714
2015-08-06 09:24:01, Error                 MOUPG CSetupManager::ExecuteDownlevelMode(376): Result = 0x80070714
2015-08-06 09:24:39, Error                 MOUPG CSetupManager::Execute(222): Result = 0x80070714
2015-08-06 09:24:39, Error                 MOUPG CSetupHost::Execute(370): Result = 0x80070714
2015-08-06 09:27:41, Error                 MOUPG CDlpManager::AsyncSerializeDisable(471): Result = 0x80070216

CcmSetup failed with error code 0x80004005 - windows 8.1

using sccm 2012 r2, trying to push to a windows 8.1 client i get:
<![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
<![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
<![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="util.cpp:1919">
<![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:3775">
<![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
<![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
<![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
<![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
<![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
<![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
<![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
<![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4539">
<![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
<![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
file="ccmsetup.cpp:4541">
<![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
<![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
<![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
<![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
<![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
<![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
type="1" thread="9468" file="ccmsetup.cpp:4584">
<![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
<![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
<![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
thread="9468" file="ccmsetup.cpp:9763">
<![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
any ideas why its failing?

Hi,
I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
instruction:
http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
http://blog.configmgrftw.com/configmgr-client-startup-script/
There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

EvtFormatMessage function fails with error code 15033 (ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND) on non-English Windows OS

I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
I have observed a strange problem on non-English windows 2008 OS.
If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
OS language (Chinese in this case). That's not a desirable output for me.
Following is the way I'm calling EvtFormatMessage
EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
1 /* EvtFormatMessageEvent */,
m_pTextBufferSize/sizeof(WCHAR),
m_pTextBuffer, &dwBuffUsed);
A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
My question is why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
Any help would be appreciated.
TIA,
Regards,
Yogesh

Was on vacation and hence the delay in replying.
As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT. If I change this macro
to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
This is not an option for me as I want event details in English language only.
Regards,
Yogesh
Regards, Yogesh

OPatch failed with error code 73/EMR3 upgrade

Hi,
EM10.2.0.1
Upgrade to R3
Appl patch 4329444 according R3 readme.
in directory with the patch:
$ opatch apply
Invoking OPatch 10.2.0.1.0
Oracle interim Patch Installer version 10.2.0.1.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /apps/oracle/product/em10g/db10g
Central Inventory : /apps/oracle
from : /apps/oracle/product/em10g/db10g/oraInst.loc
OPatch version : 10.2.0.1.0
OUI version : 10.2.0.1.0
OUI location : /apps/oracle/product/em10g/db10g/oui
Log file location : /apps/oracle/product/em10g/db10g/cfgtoollogs/opatch/opatch-2007_Jul_09_13-58-13-MDT_Mon.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /trash/em10gr3unzip
Details = PatchObject constructor: Input file "/trash/em10gr3unzip/etc/config/actions" or "/trash/em10gr3unzip/etc/config/inventory" does not exist.
Apply Session failed: PatchObject constructor: Input file "/trash/em10gr3unzip/etc/config/actions" or "/trash/em10gr3unzip/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
$ cat /apps/oracle/product/em10g/db10g/cfgtoollogs/opatch/opatch-2007_Jul_09_13-58-13-MDT_Mon.log
SEVERE:OPatch invoked as follows: 'apply '
INFO:Starting ApplySession at Mon Jul 09 13:58:13 MDT 2007
INFO:Starting Apply Session at Mon Jul 09 13:58:13 MDT 2007
SEVERE:OUI-67075:Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /trash/em10gr3unzip
Details = PatchObject constructor: Input file "/trash/em10gr3unzip/etc/config/actions" or "/trash/em10gr3unzip/etc/config/inventory" does not exist.
SEVERE:OUI-67073:Apply Session failed: PatchObject constructor: Input file "/trash/em10gr3unzip/etc/config/actions" or "/trash/em10gr3unzip/etc/config/inventory" does not exist.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Mon Jul 09 13:58:13 MDT 2007
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Mon Jul 09 13:58:13 MDT 2007
INFO:Stack Description: java.lang.RuntimeException: PatchObject constructor: Input file "/trash/em10gr3unzip/etc/config/actions" or "/trash/em10gr3unzip/etc/config/inventory" does not exist.
INFO:StackTrace: oracle.opatch.PatchObject.<init>(PatchObject.java:1089)
INFO:StackTrace: oracle.opatch.PatchObjectUtil.loadPatch(PatchObjectUtil.java:996)
INFO:StackTrace: oracle.opatch.ApplySession.loadAndInitPatchObject(ApplySession.java:1076)
INFO:StackTrace: oracle.opatch.ApplySession.process(ApplySession.java:4027)
INFO:StackTrace: oracle.opatch.OPatchSession.main(OPatchSession.java:912)
INFO:StackTrace: oracle.opatch.OPatch.main(OPatch.java:506)
$
$ OPatch failed with error code 73
===========================================
Not sure what the OPatch is looking for.
Any hints?
Thx,
Dobby

Apparently, it is looking for "/trash/em10gr3unzip/etc/config/actions" or "/trash/em10gr3unzip/etc/config/inventory. May be you can try again unzipping/uncompressing the patch and then applying the patch.
Thanks
Chandra

Client push error CcmSetup failed with error code 0x8007064c

Installing file 'C:\WINDOWS\ccmsetup\Silverlight.exe' with options '/q'.
File 'C:\WINDOWS\ccmsetup\Silverlight.exe' returned failure exit code 1612. Fail the installation.
InstallFromManifest failed 0x8007064c
ITaskScheduler::Delete failed to delete task Configuration Manager Client Retry Task (0x80070002).
CcmSetup failed with error code 0x8007064c
This error i faced while Upgrading client on Windows Server 2003 ,that i upgraded my SCCM 2012 SP1 to SCCM2012 R2
i tried to uninstall the client and done successfully , while pushing the client again I've the same Error code.
i searched and found SMS 2003 toolkit 2 fixed the problem for some people but i did not .

<![LOG[==========[ ccmsetup started in process 8108 ]==========]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9437">
<![LOG[Running on platform X86]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1837">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
<![LOG[Launch from folder C:\Setup\Client\]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:721">
<![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="15:37:25.641-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:727">
<![LOG[Running on 'Microsoft(R) Windows(R) Server 2003, Standard Edition' (5.2.3790). Service Pack (2.0). SuiteMask = 272. Product Type = 18]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="util.cpp:1919">
<![LOG[Ccmsetup command line: C:\Setup\Client\ccmsetup.exe SMSSLP=ldcsccm1v.linkdc.local SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3590">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3775">
<![LOG[Command line: C:\Setup\Client\ccmsetup.exe SMSSLP=ldcsccm1v.linkdc.local SMSSITECODE=ldc DNSSUFFIX=linkdc.local]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:3776">
<![LOG[SslState value: 224]LOG]!><time="15:37:25.876-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:4425">
<![LOG[No version of the client is currently detected.]LOG]!><time="15:37:25.907-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:2748">
<![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="0" thread="5432" file="ccmsetup.cpp:9281">
<![LOG[A Fallback Status Point has not been specified. Message with STATEID='100' will not be sent.]LOG]!><time="15:37:25.938-180" date="08-05-2014" component="ccmsetup" context="" type="1" thread="5432" file="ccmsetup.cpp:9763">

Windows 10 Upgrade Failed with error code 80004005

Similar Messages

Maybe you are looking for