Windows 10 Upgrade guide for Tablets

Results may vary depending on Models, confirmations needed.Installed & Tested on Lenovo MIIX 2 8 64GB (Please post your model if this has worked for you) **PLEASE PROCEED AT YOUR OWN RISK, I AM NOT LIABLE/RESPONSIBLE FOR ANY DAMAGES** Windows 10 is finally here, have you reserved your copy of the Free Upgrade yet? Here are some tips and guidelines to help you start the process.(If you have already reserved your copy, but the system hasn't prompted you for the update, you may need to download the manual install or force start the upgrade/update process. (See below for more details)) How to Reserve your copy of Windows 10 Free Upgrade Today IMPORTANT!!! DO NOT UPDATE YOUR SYSTEM WITHOUT RESERVING!! (You will be prompt to enter a Win10 product key for activation)Make sure you have reserved your copy of the Free Upgrade via 'Software Updates', there should be a windows logo in the 'Notification Area', click and reserve your copy today.Once you have your copy reserve, you may or may not get prompted for the update/upgrade. You can either wait for the official notification, or you can download the ISO or force the update process via 'Software Update'.Can't reserve your copy due to missing update icon on taskbar? Check this Guide. How to Start Upgrading to Windows 10 If you have been prompt by the 'Windows Update' , you can start upgrading by following the onscreen instructions.If you have not been prompt by 'Windows Update', you may need to wait for the official announcement to be pushed out.Check this website for Force Update procedures.How to Upgrade Windows 10 using ISO Download the Microsoft Media Tool Creation via microsoft.comRun the tool and Choose Upgrade or Download the ISO.Download daemon tools to mount the ISORun SetupHow to Upgrade Windows 10 using bootable USB (OTG Cable Required)Download the Microsoft Media Tool Creation via microsoft.comRun the tool and Download the ISODownload the Rufus Bootable USB creation app to create a bootable USB.Leave everything default except for Partition Scheme to ''GPT partition scheme for UEFI computer".Choose ISO and 'Start'.Once done, you can boot the USB or run Setup.exe in windows 8.1 (Setup.exe is recommended)I will keep this updated.Please let me know if there's a mistake or i'm missing a step. Enjoy your new OS. Vampirexhunter

Clean InstallOnce you have upgrade and activated your copy of Windows 10. You can do a clean install from the USB bootable, when prompted to enter 'Product Key', press 'Skip Step' to proceed. Once Windows is fully installed and setup, it should activate on its own.You may need to download the Win 8.1 drivers for your device.For Intel HD Graphics Drivers, you will need to download the latest ZIP and do a manual driver update in 'Device Manager'.Common ProblemsActivation may require a few tries, due to high traffic volume.Some users have reported the SD Card causing issues during Installation, it is recommended to remove the SD card prior to upgrading/installing your OS.Compatibility IssuesSeveral Users have reported technical difficulties installing Windows 10 on an Intel Based Z2760 Tablets, due to the incompatibility drivers for the Intel Graphics Media Accelerator(Intel GMA). No fix have been reported so far.

Similar Messages

How to get Upgrade Guide for Web AS 6.40 SP19

Hello,
Is there any one can help me to find the Upgrade Guide for Web AS 6.40 SP19 (Java, Windows)?
Thanks,

check
http://service.sap.com/instguides
Thanks
Prince Jose

Upgrade guide for users of older versions of Flash Media Server?

I'm looking around to see if anyone has sort of done a crossover or upgrade guide for people with older FMS installations.
We've been running the server since at least version 2, and haven't had to change much in upgrading to subsequent versions.
In doing so, we hadn't had to change to some of Adobe's newer ways of doing things with regards to configuration files, etc.
In setting up a test 4.5.x server, though... it appears we will likely want to really change the way we are doing things.
I'm wondering if anyone knows of a comprehensive site that would sort of cover topics in a "if you did this this way before, do it this way now" sort of instructions.
Thanks

we just moved from 3.5 to 4.03 and now the sound has 'hiccups' - looked thru forum and made some changes but still happening - be nice like you said if there was a 'your using this version, and this is what you need to do in the next' area

Windows 7 Upgrade Guide for dv6000/dv9000 models

Statement:
You are using this guide at your own risk. I don't take any responsibility for any problems.
Things which you should know and do before upgrade:
   1. HP may demand you to reinstall back Vista if you will have any hardware problems to troubleshoot them.
     2. HP will not help you if you will have any software problems because this models are not officially supported
          with Windows 7.
     3. Before you will upgrade to Windows 7 please make Vista Recovery CD/DVD. How to do it all informations here.
     4. All Vista drivers and pre-installed software by HP for your model are in C:\swsetup folder.
      If you still have it on your HDD then copy this folder to CD/DVD. You may need them someday.
   5. Users with nVidia graphic card should check temperature of this device before upgrade.
        This way you will know is it working ok in Windows 7 too.
         How you may check your notebook CPU (processor), GPU (graphic card), motherboard or HDD temperature?
         To do that use HWMonitor (free and recommended) or Aida64.
How to find out which model you've got and specifications for it:
      1. Click on Support & Drivers link. (Upper part of this page.)
      2. In search box type your laptop product number (p/n).
          Resource:
          How to Locate the Notebook p/n
      3. Under notebook picture you will find your notebook model name (example: HP Pavilion dv6205eu Notebook PC).
      4. On the same page click on Product Information -> Product Specifications and you will find all informations about
           your notebook hardaware.
How to install Windows 7 and what you should know while upgrading:
      1. Guide: How to Do a Clean Installation with Windows 7
      2. All Windows 7 drivers you will find in next post below.
      3. Some drivers have comment then they are originaly made for Vista system.
      When normal installation will fail, then try to run unsuccessfully installed file in Compatibility Mode (Windows Vista,
          Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
          Resources:
          Make older programs run in this version of Windows
          How to Run a Program in Compatibility Mode in Windows 7
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
This question was solved.
View Solution.

CHIPSET DRIVERS
Solution on COPROCESSOR with yellow exclamation mark ()
If you have Intel processor:
Intel Chipset (Install and reboot before other drivers) here (ver 9.1.1.1025 for 32/64 bit Win7)
Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64 bit Win7)
If you have AMD processor:
For dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx models (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):
nVidia Chipset (Install and reboot before other drivers) here (Vista)
For dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx models (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):
nVidia Chipset (Install and reboot before other drivers) here   (Vista)
Important information for users with nVidia chipset!
If you have 4GB of RAM or more then check Microsoft knowledge base article about solution on some problems which you may have here.
GRAPHIC DRIVERS
Intel Graphic:
    Intel 950 and Intel X3100 here (ver 15.12.75.4.1930 for Win7 32 bit) or here (ver 15.12.75.4.1930 for Win7 64 bit)
nVidia Graphic:
Important information!
   If you have installed any nVidia drivers for graphic card then before you will install other version you will
   need to remove old drivers first. Check below guide how to do it (this is not standard uninstallation
   process):
   How to remove nVidia graphic drivers from Windows system.
   Drivers:
    nVidia GeForce 8400M GS and nVidia GeForce 8600M GS:
         OPTION 1
   Version 267.76 here for Windows 7 32 bit or here for Windows 7 64 bit.
         OPTION 2
         Version 197.16 here for Windows 7 32 bit or here for Windows 7 64 bit.
         Note:
         Remember to uninstall previous graphic card driver first.
    nVidia GeForce GO 6150M, 7150M, 7200M, 7400M or 7600M:
          OPTION 1
        First try to install original Vista drivers for your model.
          Resource:
          How to find all Vista audio and graphic drivers for specific model on HP sites?
           OPTION 2
     If original drivers will not work then try modded drivers ver 195.81.
        Note:
        Remember to uninstall previous graphic card driver first.
How to install them under Windows 7?
   1. Download driver here (for Win7 32 bit) or here (for Win7 64 bit) double click and select extract,
   2. Download from this site with drivers also INF Modified and replace original INF in extracted folder,
   3. Install & reboot.
     OPTION 3
           Last thing which you may do is installing graphic driver from Windows Update.
        Note:
        Remember to uninstall previous graphic card driver first.
     1.Open Windows Update by clicking the Start button , clicking ' All Programs ', and then clicking '
                 Windows Update '.
     2.In the left pane, click ' Check for updates ' , and then wait while Windows looks for the latest updates
                 for your computer.
     3.Select the ' Optional Updates ' and install from there only driver for your graphic card.
AUDIO DRIVERS
Conexant HD Audio
     Use original Vista drivers for your model.
         Resource:
         How to find all Vista audio and graphic drivers for specific model on HP sites?
Realtek HD Audio
     Use original Vista drivers for your model.
         Resource:
         How to find all Vista audio and graphic drivers for specific model on HP sites?
   If Vista drivers will not work well for You then try to use official Realtek one from here (for 32/64 bit Win7).
         When you will enter this link check there "I accept to the above." and after that click ' Next ' button.
MODEM DRIVERS
Conexant Modem here (ver 7.61.0.0 A) (Vista) - If you have Conexant audio card
Motorola SM56 Modemhere (ver6.12.6.0 A)   (Vista) - If you have Realtek audio card
HP QUICK PLAY
HP QuickPlay here (ver 3.7 v.6112 for 32/64 bit Win7)
Notes:
It must be installed before HP Quick Launch Buttons.
You've installed this software and it hangs while using?
      Uninstall your current HP QUICK PLAY version and install this which you had in Vista.
      Resource:
      Uninstalling Software in Windows 7
      Uninstall or change a program in Windows 7
      If you burned CD/DVD with C:\swsetup folder as suggested in guide then you will find it there.
HP Quick Launch Buttons
Solution onKEYBOARD FILTER with yellow exclamation mark ()
HP Quick Launch Buttons here (ver 6.50.13.1 for 32/64 bit Win7)
WIRELESS DRIVERS
Intel Wireless here (ver 13.0.0.107 for 32/64 bit Win7)
Broadcom Wireless here (ver 5.60.48.35 for 32/64 bit Win7)
Atheros Wireless here (ver 8.0.0.316 for 32/64 bit Win7)
HP Wireless Assistant here (ver 3.50.12.1 for 32/64 bit Win7)
Bluetooth Wireless here (ver 6.5.0.2000 for 32/64 bit Win7) Only for models with Bluetooth.
Note:
How to install Bluetooth driver?
Check the link below:
How to install HP Bluetooth driver in Windows 7.
ETHERNET DRIVERS
Realtek RTL8101 Lan here (for 32/64 bit Win7) Only for models with Intel processor.
Models with AMD processors don't need to install any extra file for ethernet., because drivers for it are in chipset package.
CARD READER
Solution on BASE SYSTEM DEVICE with yellow exclamation mark ()
Ricoh 5-1 Card Reader Driver here (ver 6.10.01.03 for 32/64 bit Win7)
TOUCHPAD DRIVER
Synaptics TouchPad here (ver 16.0.1.0 for 32/64 bit Win7)
Note:
By default is enabled Two - Finger Scrolling. If you want to use only one finger for scrolling then check the link below:
How to change Two - Finger Scrolling on One - Finger Scrolling in Synaptics TouchPad software.
ONLY IF YOUR MODEL HAS: WEBCAM
Cyberlink YouCam here (ver 2.0.3115 for 32/64 bit Win7)
Note:
If you have any problem with your webcam then check below links to HP documents:
Fixing Webcam Problems in Windows
Testing a Webcam using Your Favorite Instant Messenger
3VRX (optional software)
on-screen visuals and associated sounds that are displayed and heard when adjusting volume
3VRX here (ver 2.5 for 32/64 bit Win7)
Note:
Here is YouTube video which shows what can be done with this software.
ONLY IF YOUR MODEL HAS: FINGERPRINT READER
1. Uninstall all previous fingerprint reader drivers and software
       Check below guide how to do it (this is not standard uninstallation process):
     How to uninstall AuthenTec fingerprint software and driver
2. You may install now correct fingeprint reader driver and software.
       There are available two applications to this device:
      - AuthenTec TrueSuite
   and
   - DigitalPersona Personal (recommended).
       Information on how to install both softwares you will find in below guides:
       AuthenTec TrueSuite, AuthenTec fingerprint and Windows 7
     DigitalPersona Personal, AuthenTec fingerprint and Windows 7
ONLY IF YOUR MODEL HAS: DVD DRIVE WITH LIGHTSCRIBE
How can you check is your DVD drive with Lightscribe?
On DVD panel there will be Lightscribe logo.
LightScribe Host Software here (ver 1.18.22.2 for 32/64 bit Win7)
Report of the changes which were made in the guide
Edited 16-01-2010 Updated Synaptics TouchPad driver to ver 14.0.3.1, Updated Broadcom driver to ver 5.60.18.41
Edited 18-01-2010 Updated nVidia Graphic section. Added drivers for nVidia GeForce 8400M GS and nVidia GeForce 8600M GS (ver 195.62)
Edited 19-01-2010 Updated LightScribe Host Software to ver 1.18.10.2
Edited 05-02-2010 Updated fingerprint drivers, software and added fingerprint guides.
Edited 27-02-2010 Updated LightScribe Host Software to ver 1.18.11.1
Edited 03-03-2010 Updated HP Quick Launch Buttons to ver 6.50.13.1
Edited 20-03-2010 Updated Synaptics TouchPad to ver 15.0.9.0 (this version enables multitouch gestures)
Edited 21-03-2010 Added two guides. How to remove nVidia graphic drivers from Windows system and How to install HP Bluetooth driver in
                                Windows 7.
Edited 25-03-2010 Updated LightScribe Host Software to ver 1.18.12.1
Edited 26-03-2010 Changed Intel Matrix Storage Manager name to Intel Rapid Storage Technology, added Intel Rapid Storage Technology
                                to ver 9.6.0.1014
Edited 31-03-2010 Updated nVidia Graphic section with uninstallation guide, Updated drivers for nVidia GeForce 8400M GS and 8600M GS
                                to ver 197.16
Edited 10-04-2010 Updated LightScribe Host Software to ver 1.18.13.1
Edited 04-05-2010 Updated LightScribe Host Software to ver 1.18.14.1
Edited 05-05-2010 Updated Synaptics TouchPad driver to ver 15.0.13.0, Updated HP QuickPlay to ver 3.7 v.6112
Edited 21-05-2010 Updated Bradcom wireless to ver 5.60.48.35, Updated Atheros wireless to ver 8.0.0.316, Updated Synaptics touchpad
                                to ver 15.0.13.3
Edited 24-05-2010 Updated HP Wireless Assistant to ver 3.50.11.2
Edited 24-06-2010 Updated Synaptics TouchPad to ver 15.0.17.4
Edited 30-07-2010 Updated Broadcom wireless - the same version but with some improvements, Updated HP Wireless Assistant to ver 3.50.12.1
Edited 01-04-2011 Added drivers for nVidia GeForce 8400M GS and nVidia GeForce 8600M GS (ver 267.76)
Edited 02-04-2011 Updated LightScribe Host Software to ver 1.18.22.2, Added one guide: How to change Two - Finger Scrolling on One - Finger
                                Scrolling in Synaptics TouchPad software.
Edited 14-12-2011 Updated driver for Intel® Rapid Storage Technology
Edited 07-05-2012 Updated driver for HP Bluetooth to ver 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, Updated guide: How to install
                                HP Bluetooth driver in Windows 7
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Windows 8 Upgrade guide for IdeaPad Systems

Hi ,
I am trying to install WIN8 using usb ITS NOT WORKING , after selecting the correct BOOT OPTION from BIOS , when i hit enter screen goes black and don't turn up .
The USB is bootable as using the same USB i have installed into another system

hi ravisingh08,
Welcome to the Community.
Are you trying to upgade a previous version of WIndows 8? (i.e. Windows 8 to Windows 8 Pro)
If you are, try to:
1. Boot into the BIOS
2. Set the following settings:
Boot Tab
UEFI = Disabled
UEFI Boot = Disabled / Legacy First (if applicable)
Security Tab
Secure Boot = Disabled (if applicable)
Exit Tab
OS Optimized Defaults = Other OS (if applicable)
If not, what is the model and preloaded OS of the IdeaPad system?
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Technical Upgrade Guide for Custom Code

Hi,
My client is in the process of upgrading from 11.5.9 to 12.1 and has a relatively large customisation footprint.
There is a wealth of infomation on high-level technical changes made in R12 i.e. banks moved to TCA, suppliers moved to TCA etc. however there is little information on schema or low-level changes.
On a site with a large amount of customisations such as this it is often unfeasible to analyse every piece of code. In this case the client has to rely on customisations failing on compilation or execution to determine that an upgrade fix is required.
However, certain changes in R12 have been implemented in a way which will not highlight a problem using the approach above. For example, the table RA_ADDRESSES_ALL is retained in the archive tablespace however addresses are now maintained in TCA. Code that references this table will pass compilation however will reflect incorrect data.
Naturally Oracle are not responsible for custom extensions to the E-Business suite however it would be useful if there was a document which detailed the changes that needed to be made to make them compatible with R12.
Is there a published document on recommended upgrade checks required for custom code that I have missed?
Is there any further information that could be of assistance in this area?
Many thanks

I asked the developer working on this, for steps to duplicate the error, and I followed them:
"...the easiest way I’ve been testing it, is to log into US Super HRMS Manager | People Enter and Maintain. When the window pops up to search for a person, just click the New button like you’re going to enter a new hire. Type in a last name, first name, Mr/Mrs, then click the drop down on the top right for “Create Employment.” Then click on the field below that for the employee number. Then the message will appear.
I have noticed that it will allow you to click OK through the message and continue, and if you stay in the form and try to create another new person, the message doesn’t seem to come up a second time. But, if you log out and in and try again, you will get the message again."
When the message pops up, it spews quite a bit of data, and then stops until I click something.
Below is the text from one "USER_EXIT" of the full spew up to the one that looks like an obvious error, and it stops until I click OK on the "Application Emergency Message" error pop-up:
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="CH2_BEN_PPG_ACCESS" FIELD="GLOBAL.OUT" N
PERWSHRG, 10, Built-In, Entry, 2192221, USER_EXIT
PERWSHRG, 10, Built-In, Exit, 2192221, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: NULL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.D_PTU_USER_PERSON_TYPE
Out Argument 0 - Type: String Value: Employee
Executing FIND_ITEM Built-in:
In Argument 0 - Type: String Value: PERSON.EMPLOYEE_NUMBER
Out Argument 0 - Type: Integer Value: 786460
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_item_property2.set_property.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 786460
In Argument 1 - Type: Number Value: 16
Out Argument 0 - Type: String Value: TRUE
Executing SET_ITEM_PROPERTY/SET_FIELD Built-in:
In Argument 0 - Type: Integer Value: 786460
In Argument 1 - Type: Number Value: 28
In Argument 2 - Type: String Value: NULL
In Argument 3 - Type: Oracle Number Value: 4.000000
In Argument 4 - Type: Oracle Number Value: 0.000000
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_item_property2.set_property.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_ITEM Built-in:
In Argument 0 - Type: String Value: PERSON.DATE_OF_BIRTH
Out Argument 0 - Type: Integer Value: 786467
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_item_property2.set_property.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 786467
In Argument 1 - Type: Number Value: 16
Out Argument 0 - Type: String Value: TRUE
Executing SET_ITEM_PROPERTY/SET_FIELD Built-in:
In Argument 0 - Type: Integer Value: 786467
In Argument 1 - Type: Number Value: 28
In Argument 2 - Type: String Value: NULL
In Argument 3 - Type: Oracle Number Value: 4.000000
In Argument 4 - Type: Oracle Number Value: 0.000000
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_item_property2.set_property.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_ITEM Built-in:
In Argument 0 - Type: String Value: PERSON.D_MARITAL_STATUS
Out Argument 0 - Type: Integer Value: 786470
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_item_property2.set_property.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 786470
In Argument 1 - Type: Number Value: 16
Out Argument 0 - Type: String Value: TRUE
Executing SET_ITEM_PROPERTY/SET_FIELD Built-in:
In Argument 0 - Type: Integer Value: 786470
In Argument 1 - Type: Number Value: 28
In Argument 2 - Type: String Value: NULL
In Argument 3 - Type: Oracle Number Value: 4.000000
In Argument 4 - Type: Oracle Number Value: 0.000000
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_item_property2.set_property.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.EMPLOYEE_NUMBER
Out Argument 0 - Type: String Value: NULL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.D_PTU_USER_PERSON_TYPE
Out Argument 0 - Type: String Value: Employee
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.EMPLOYEE_NUMBER
Out Argument 0 - Type: String Value: NULL
Executing COPY Built-in:
In Argument 0 - Type: String Value: 0
In Argument 1 - Type: String Value: PERSON.ATTRIBUTE2
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.FIRST_NAME
Out Argument 0 - Type: String Value: empnew007
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.LAST_NAME
Out Argument 0 - Type: String Value: testemp090
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.HIRE_DATE
Out Argument 0 - Type: String Value: 05-APR-2011
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.BUSINESS_GROUP_ID
Out Argument 0 - Type: String Value: 0
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.MIDDLE_NAMES
Out Argument 0 - Type: String Value: NULL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: PERSON.SUFFIX
Out Argument 0 - Type: String Value: NULL
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND MESSAGE_NAME "CH2M_HR_GEN_NOTFOUND" "CH"
PERWSHRG, 10, Built-In, Entry, 2192221, USER_EXIT

Technical upgrade guide for BOE 3.1 SP3 to BOE 4.0 for Unix

Team,
can any one help me with a proper tehcnical procedural guide documentation for BOE 3.1 SP3 to BOE4.0 in Unix envieornment.
None of docs present in the SAP masker palce give a proper tehcnical setaps or approach rather it give me some generic docuemensts whihc are simply wordy with no technical details.
Am kind of stuck with BPE upgrae from 3.1 SP3 to BOE 4.0 for UNIX (I donot wnat any WINDOWS documentation)
regards
Rishi

Hi,
yes - finding documentation on UNIX is somethimes painfull. Cause BI4 is currently in Ramp- Up, it is possible that not all Documentation is finished.
Did you tried this Guide?
https://websmp104.sap-ag.de/~sapidb/011000358700001237062010E/xi4_bip_upgrade_en.pdf
Regards
-Seb.

Upgradation Guide for Weblogic Portal 4.0 to 8.1

If we have to upgrade the Weblogic Portal 4.0 to 8.1, what is the best way of doing
it?
Shall we directly upgrade 4.0 to 8.1 or need to do 4.0 to 7.0 and then 7.0 to
8.1?
How successful it would be? Is there any forseen issues while upgradation?

Hi, is there any update on the portal 4.0 to 8.1 migration path? Our team is faced
with this same problem. Migrate through portal 7.0 or rebuild our portal app
on 8.1
"Mike" <[email protected]> wrote:
It's been five months on this question. Come on.
There are plenty of us out here looking at upgrading Portal 4.0. If we want to
upgrade to 8.1, what is the best approach?
Inquiring Minds Want To Know.
"suganya" <[email protected]> wrote:
If we have to upgrade the Weblogic Portal 4.0 to 8.1, what is the best way of
doing it? Shall we directly upgrade 4.0 to 8.1 or need to do 4.0 to 7.0 and then
7.0 to 8.1?
How successful it would be? Is there any forseen issues while upgradation?

ISA upgrade guide

hi,
does anyone have documents on upgrade guide for ISA 5.0 to 7.0?
Thanks
Shanti

There may not be one specific to ISA upgrade. But there is one for CRM Java components upgrade. Here is the upgrade document for [SAP CRM 7.0 SR1 Java Components|https://websmp103.sap-ag.de/~sapidb/011000358700000516902009E]. This link is for Windows OS and you should get one that is specific to your need from /instguides in the [Service Marketplace|http://service.sap.com/instguides].
Note: You need access to Service Marketplace.
Easwar Ram
http://www.parxlns.com

Windows 10 Upgrade Guide

Da nun Windows 10 kurz bevor steht und viele vielleicht das Upgrade lieber früher, als später, durchführen möchten, hat Lenovo für einige Systeme bereits entsprechende Guide's erstellt.
Diese sollen helfen das Upgrade möglichst problemlos durchzuführen und sollte mal etwas nicht funktionieren, ist dieses Forum direkt die richtige Anlaufstelle
Windows 10 Upgrade Guide: https://support.lenovo.com/us/en/documents/ht103822

Clean InstallOnce you have upgrade and activated your copy of Windows 10. You can do a clean install from the USB bootable, when prompted to enter 'Product Key', press 'Skip Step' to proceed. Once Windows is fully installed and setup, it should activate on its own.You may need to download the Win 8.1 drivers for your device.For Intel HD Graphics Drivers, you will need to download the latest ZIP and do a manual driver update in 'Device Manager'.Common ProblemsActivation may require a few tries, due to high traffic volume.Some users have reported the SD Card causing issues during Installation, it is recommended to remove the SD card prior to upgrading/installing your OS.Compatibility IssuesSeveral Users have reported technical difficulties installing Windows 10 on an Intel Based Z2760 Tablets, due to the incompatibility drivers for the Intel Graphics Media Accelerator(Intel GMA). No fix have been reported so far.

Where is the PC Tune-up guide for Windows 7?

Hardware ForumJust curious. Everything in the FAQ dropdown menu in the front page of this forum section are dated 5 or 6 old. I know that some of the info is still valid, but is any of that going to be updated? And is there a benchmarking site I can rely on for new builds? The PPBM site seems to have stopped operating.
Anyway, I was looking for that tune-up guide for PCs running Premiere. I can't find it anywhere.

I don't know if what I have is "that tune-up guide" for Win7 but I do have a bunch of saved links
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
http://www.decrap.org/ remove bloatware
http://support.microsoft.com/fixit/
Record Steps http://blog.raxco.com/2012/05/18/windows-7-tool-records-your-pc-problems/
Free System Optimizer http://www.iobit.com/advancedsystemcareper.html
Registry Cleaners http://windowssecrets.com/newsletter/putting-registry-system-cleanup-apps-to-the-test/
Be sure you have the default hard drive indexing OFF for all drives and folders!!!
http://www.pcworld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. html
Temp/Cookie Cleaner http://www.mixesoft.com/
http://forums.adobe.com/thread/789809
Win7 Toolbar http://WindowsSecrets.com/comp/110210
More Win7 Tips http://windowssecrets.com/comp/110127
Utilities http://windowssecrets.com/comp/110106 (Startup Solutions)
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Win7 Configuration Article http://windowssecrets.com:80/comp/100218
Win7 Monitor http://windowssecrets.com:80/comp/100304
Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346
An Adobe Win7 FAQ http://forums.adobe.com/thread/511916
More Win7 Tips/FAQ http://forums.adobe.com/thread/513640
Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Win7 God Mode http://forums.adobe.com/thread/595255
CS5 Install Error http://forums.adobe.com/thread/629281
CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
Win7 and Firewire http://forums.adobe.com/thread/521842
http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435
http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
Harm's Tools http://forums.adobe.com/thread/504907
Also http://www.tune-up.com/products/tuneup-utilities/
Also http://personal.inet.fi/business/toniarts/ecleane.htm
Optimizing Hard Drive http://www.video2brain.com/en/videos-5353.htm
-and http://forums.adobe.com/thread/1083797
Win7 Reinstall http://windowssecrets.com/newsletter/win7s-no-reformat-nondestructive-reinstall/
Anti-Malware Tools http://windowssecrets.com/newsletter/the-advanced-system-recover-toolkit/
Repair AVI http://forums.adobe.com/thread/888268
Tune Vista & Win7 64bit http://forums.adobe.com/thread/436139
GPU Monitor http://www.techpowerup.com/downloads/2092/TechPowerUp_GPU-Z_v0.5.8.html
http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/
Drive C space http://forums.adobe.com/thread/1007934?tstart=0

Windows 10 Drivers for hp pavilion x2 10.1 inch 32 bit tablet

Where can i find? Windows 10 Drivers for hp pavilion x2 10.1 inch 32 bit tablet

I am sorry sir for not ellaborating it more. HP Pavilion x2 Detachable Laptop 10-k007na (10 inch, Intel Atom 1.33 GHz, 2 GB RAM, 32 GB Memory, Windows 8.1 Here Yes I have already upgraded it to Windows 10. Thanks

Oracle Application Server 10g Installation Guide for Windows

The link to Oracle Application Server 10g Installation Guide for Windows on the OTN Web Site don't work. Using search on site does not turn up any installation document for Oracle Application Server 10g.
How can I find the Installtion Guide or the Quick Installtion Guide for Oracle Application Server 10g for Windows?

Hi,
The docs you seek are available through the OTN documentation pages at: http://otn.oracle.com/documentation/index.html.
Click on the link for "Oracle Application Server Release 10g (9.0.4)" and then on the "View Library" link for part B10468_04 - Oracle Application Server 10g Online Documentation 10g (9.0.4.0.0) for Microsoft Windows.
The Docs are located under the Documentation tab.
Alternatively, here is the direct link to the Documentation Tab interface of the Library:
http://download.oracle.com/docs/cd/B10468_04/docs.htm
Regards,
Les

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Any Specific Guide for Ecc 5.0 upgrade to ECC 6.0 (linux/oracle)?

Hi Gurus
Is there any specific guide available for the Upgrade of ECC 5.0 to ECC 6.0 from service market place.
for the linux operating system and oracle database. or atleast , I want to know what are the mimimum checks to be done (prerequisities) in the ECC 5.0 system which need to upgrade into ECC6.0.
Thanks in advance
Balaji

Hi,
There is not an specific guide for ECC 5.0 upgrade, just the guides specific for your OS/DB combination, they can be downloaded in https://websmp204.sap-ag.de/instguides but you should use the Unix/Oracle document,

Windows 10 Upgrade guide for Tablets

Similar Messages

Maybe you are looking for