Windows 10 upgrade stopped touchpad single and double tapping

I recently upgraded to the Windows 10 from Windows 7. Now the touchpad single/double tapping not working. I have an HP laptop. If there is no solution to this problem then I will just revert back to Windows 7. Thanks,

I have same problem-I spent about half an hour with microsoft assistant on phone who eventually after several failed attempts to rectify problem,appeared to give up and advised that touchpad was incompatible with windows 10 and finally advised that I needed a driver update from HP the manufacturer of my notebook. However I have tried HP support assistant online and my driver is up to date and after several attemps by HP assistant to solve problem I am no further forward and very disappointed-afterall the touchpad is a pretty basic tool of computers/pc -well for those that do not have touch screens Hope you have better luck than I have had today.

Similar Messages

Auto single finger double tap

Hi, i am a disabled useR, I have apps that want me to single finger double tap, i cannot do this, is there a way i can use assistive touch I or something else to double tap for me?

Yes you can. Go to Settings/General/Accessibility and tap on AssistiveTouch. Turn it on (if it's not already on).
On that same screen, tap on "Create New Gesture". On the screen that shows up, record your new gesture (double-tap anywhere on the grey screen). Next tap the Stop button, then tap on the Save button. Give your gesture a name (like DT for double-tap). Tap on the Save button after naming your gesture. If you somehow mess up with recording the gesture or don't like the name or simply want to clear it, you can delete it by swiping it to the left on the AssitiveTouch setup screen where Custom Gestures is displayed. From then on, the gesture will be available in the AssistiveTouch menu under Favorites. You drag the Favorite gesture to the button you want to double-tab and the recorded action will be performed on the desired button.

Outlook 2010 apostrophe, single and double quotes are changes to question mark while sending mails to other internet receipient.

We are using MS Outlook 2010 as our mail client. But we have noticed that whenevr we sent a mail to any other internet mail recipient all the "apostrophe", "single" and "double quotes" have automatically converted to ?. We have
done almost all the workaround found in this site such as
1.New a message and focus on the message window > click File > Options > Mail > Spelling and Autocorrect… > Proofing > AutoCorrect Options… > AutoFormat > clear the box before “Straight quotes” with “smart quotes”
2. Used different encoding. We presently using US-ASCII for outgoing message. etc.
Need your help to sort out these issues urgently.
Waiting for a solution.

Hi,
What is your account type? IMAP, POP or Exchange?
Send an email from the webmail, ask the recipient if this issue persists.
As far as I know, this problem is always related to the encoding for outgoing messages, and here I suggest you try UTF-8:
Go to File -> Options -> Advanced -> International options -> Uncheck "Automatically select encoding for outgoing messages", then select "Unicode (UTF-8)" beside "Preferred encoding for outgoing messages" -> OK.
Hope this helps.
Regards,
Melon Chen
TechNet Community Support

Doubt - mouse double click invokes both single and double click

Hi Friends,
I added mouse listener to a java component. In the mouseClicked() method, I have implementation for both mouse single and double click. When I try to double click that component it invokes the single click method first and the it invokes the double click method. My problem is when I try to double click that component it should invoke my double click method alone not single click too.
I'd be very grateful if someone can help me.
Thanks and Regards,
Sangeetha J

Your problem: a double click is two single clicks. The first click will always fire a single-click event. How's the computer supposed to know that another click is to follow?
All I think you could do is to instantiate a timer in the one-click method, set to whatever amount of time you think a double-click should take. If you get a second event while the timer's still active, it was a double-click and you can stop the timer and do the double-click action. Otherwise your timer should execute the single-click action after it timed out.
But this will make your GUI look like it's responding slowly to single-clicks.

Handling Tap and Double Tap

I'm following the example code in the iPhone OS Programming Guide for dealing with the complication of having your application handle both single taps and double taps in different ways under the section on Handling Multi-Touch events.
I'm running into a scenario where both a single tap and a double tap are registered as part of an attempted double tap. It seems to be an issue with timing. It seems that even though the cancelPreviousPerformRequestsWithTarget gets called on the delayed single tap gesture that it is too late and it fires anyways and then it still goes on to register the double tap also.
This seems to happen only if the timing is exactly right. A fast double tap and it works fine. A double tap slower than the performSelector withObject afterDelay for the first tap and it only registers the single tap as expected. However, the issue seems to occur is the the timing in between the two taps is exactly the the same as the single tap delay (.2 seconds is what I'm using).
Has anyone else run into this and found a solution, or am I doing something wrong perhaps?
Thanks,
-Keith

I think I found my problem. The first touch and the second touch were on separate pieces of my game board. So I was calling perform action with delay on the first, but canceling it on the object under the second touch. That is why the cancel message was not going through.
Thanks,
-Keith

Single and double quotes entered in form field cause corruption?

I am creating a database change request system using in APEX 2.2 and the main form has a description field (clob) and a API_description field (varchar2(4000)) that are text area fields on the page. The form seems to have trouble when the string data entered into the text area page items on the form contain single and double quotes.
 
I have pasted my test data below in this problem description(this is not true sql but it gets the point accross). I use the wizard created insert process to get the data into the db from the text fields in the wizard generated form, then use the wizard created fetch process to get the data back out and rendered on the same form. When I use the test data below, sometimes a few characters dissappear from my input data on the way out, sometime form fields go away, and their html is interspersed with the previous form field's data on the page. And I get different results on different tests with the same data.
 
Do I have to do something special for a vanilla htmldb text page item on a form to be able to receive single and double quotes in the string input in order to avoid that string data confusing the processing on the way in to the Database or on the way out for rendering?
 
Do I have to escape the characters? How do I do this?
 
The "varchar2(1) := ‘A’" part of the below TEST DATA string seem to cause the most trouble. The behavior is erratic - sometimes the pattern works, sometimes html is interspersed in one place, sometimes another (on the way back out)
 
START TEST DATA:
Add column pcl3_data_ind varchar2(1) to edc_tran,edc_log, edc_recreate_tran table
Or
Create a file with following sql in it
Insert into sometable values(‘A’,sysdate);
Or
create new table as follows
create table “someschema”.“sometable”
(id number not null,
Name varchar2(20) not null,
Join_date sysdate
Active varchar2(1) := ‘A’
END TEST DATA:
 
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Here is an example of the test data being displayed after being fetched back out of oracle (this will look like gibberish when rendered in the forum system (end of problem description except for example):
 
env
Add column pcl3_data_ind varchar2(1) to edc_tran,edc_log, edc_recreate_tran table
Or
Create a file with following sql in it
Insert into sometable values(‘A’,sysdate);
Or
crete new tableas follws
crate table “somesca”.“sometable”
har2(20) not null,
Join_date sysdate
Active varchar2(1) := ‘A’
woextarea>
<a class="eLink" title="Edit" href="javascript:popupURL('f?p=4000:371:204538675714370::::P371_ID,FB_FLOW_ID,FB_FLOW_PAGE_ID:1034609472735510,104,2');" tabindex="999"><img src="/i/e.gif" alt="Edit" class="eLink" /></a></td></tr><tr><td nowrap align="right"><label ...

I found a good php related post that has a nice set of the potentially problematic characters (this is in the context of word pasted into IE I think). I am pretty confident that at least single curly quotes do not work well in apex 2.2). I would not be surprised if some of the others were trouble as well.:
http://lists.evolt.org/archive/Week-of-Mon-20030602/141975.html
here is the list
$trans_tbl[chr(34)] = '"' ; // quote
 $trans_tbl[chr(38)] = '&' ; // ampersand
 $trans_tbl[chr(60)] = '<' ; // less-than
 $trans_tbl[chr(62)] = '>' ; // more-than
 $trans_tbl[chr(128)] = '€' ; // euro
 $trans_tbl[chr(129)] = '€' ; // euro
 $trans_tbl[chr(130)] = '‚' ; // low quote
 $trans_tbl[chr(131)] = 'ƒ' ; // florin
 $trans_tbl[chr(132)] = '„' ; // double low quote
 $trans_tbl[chr(133)] = '…' ; // ellipsis
 $trans_tbl[chr(134)] = '†' ; // dagger
 $trans_tbl[chr(135)] = '‡' ; // double dagger
 $trans_tbl[chr(136)] = 'ˆ' ; // circumflex
 $trans_tbl[chr(137)] = '‰' ; // per thousand
 $trans_tbl[chr(138)] = 'Š' ; // S caron
 $trans_tbl[chr(139)] = '‹' ; // left angle quote
 $trans_tbl[chr(140)] = 'Œ' ; // OE ligature
 $trans_tbl[chr(142)] = 'Ž' ; // Z caron
 $trans_tbl[chr(145)] = '‘' ; // left single quote
 $trans_tbl[chr(146)] = '’' ; // right single quote
 $trans_tbl[chr(147)] = '“' ; // left double quote
 $trans_tbl[chr(148)] = '”' ; // right double quote
 $trans_tbl[chr(149)] = '•' ; // bullet
 $trans_tbl[chr(150)] = '–' ; // en dash
 $trans_tbl[chr(151)] = '—' ; // em dash
 $trans_tbl[chr(152)] = '˜' ; // small tilde
 $trans_tbl[chr(153)] = '™' ; // trademark
 $trans_tbl[chr(154)] = 'š' ; // small s caron
 $trans_tbl[chr(155)] = '›' ; // right angle quote
 $trans_tbl[chr(156)] = 'œ' ; // oe ligature
 $trans_tbl[chr(158)] = 'ž' ; // small z caron
 $trans_tbl[chr(159)] = 'Ÿ' ; // Y with diaeresis
 
-Geoffrey

My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

My trackpad in Macbook is not working properly. The tap and double tap is not working but other gestures are working. Please help me..thanks

Portables and Magic Trackpad: Jumpy or erratic trackpad operation
Might be something from that link that will help.

Does anybody know any software for the Mac that I can run round robin, single and double elimination tournaments?

Does anybody know any software for the Mac that I can run round robin, single and double elimination tournaments? I help run tournaments but using excel for pool play and the web for bracket play, but if wifi is not available I have no way of running brackets for prize play. Can some one help point me in the direction of software that I can use locally on my Mac Pro.
Thanks,
Chris
<E-mail Edited by Host>

Splendid City Team Sports Scheduler, and Sports Scheduling Software System

Programming button for single and double click

I know how to programme a button to play a certain movie segment. However, in my current project I need to be able to programme a button in the menu so that
1. on rollover - nothing
2. on single mouse click - button colour changes + a parapraph of text appears on the menu screen in a predefined space
3. on double click - a movie clip plays
It might be a simple qiestion but I would greatly appreciate it if you could point me in the right direction.
Thanks.

Nick76 wrote:
I know how to programme a button to play a certain movie segment. However, in my current project I need to be able to programme a button in the menu so that
1. on rollover - nothing
Do not change the highligh and it will look like nothing is happening (make sure auto activate is not beign used)
2. on single mouse click - button colour changes + a parapraph of text appears on the menu screen in a predefined space
3. on double click - a movie clip plays
It might be a simple qiestion but I would greatly appreciate it if you could point me in the right direction.
Thanks.
Single and Double clicks cannot be done like that. (Some players using layered menus do require a click to get things seen but not really what you are speaking about.)
Flash or Director may be better for this?

Detecting click ( single and double) on row (displayed using iterator)

Hello All,
I am using jdev 11.1.1.6
I am displaying a list as below.
 <trh:tableLayout>
 <af:iterator value="#{pageFlowScope.Bean.List}" var="temp">
 <trh:rowLayout>
 <trh:cellFormat>
 <af:outputText value="#{temp.value1}"/>
 </trh:cellFormat>
 <trh:cellFormat>
 <af:outputText value="#{temp.value2}"/>
 </trh:cellFormat>
 <trh:cellFormat>
 <af:outputText value="#{temp.value3}"/>
 </trh:cellFormat>
 <trh:cellFormat>
 <af:outputText value="#{temp.value4}"/>
 </trh:cellFormat>
 </trh:rowLayout>
 </af:iterator>
 </trh:tableLayout>
My requirement is, when user clicks on a row, that row should be detected in backend and those value will be used.
My requirement is, On single click row should be detected(in backend/bean)
On double click, the values is saved(in backend/bean).
How can i detect single and double click on a particular row ?

I have updated the code as below, single click and double click are getting detected on a row
 <af:resource type="javascript">
 function singleClick(){
 alert("Single Click");
 function doubleClick(){
 alert("Double Click");
 </af:resource>
 <trh:tableLayout>
 <af:iterator value="#{pageFlowScope.Bean.List}" var="temp" onclick="singleClick()" ondblclick="doubleClick()">
 <trh:rowLayout>
 <trh:cellFormat>
 <af:outputText value="#{temp.value1}"/>
 </trh:cellFormat>
 <trh:cellFormat>
 <af:outputText value="#{temp.value2}"/>
 </trh:cellFormat>
 <trh:cellFormat>
 <af:outputText value="#{temp.value3}"/>
 </trh:cellFormat>
 <trh:cellFormat>
 <af:outputText value="#{temp.value4}"/>
 </trh:cellFormat>
 </trh:rowLayout>
 </af:iterator>
 </trh:tableLayout>
Now,
suppose i have following values for some/any row,
value1=20, value2="abc", value3=009, value4="Language"
How can i retrieve these values in java script (if in backing bean then very good)

When I go to the calander function on my I pad and double tap... Nothing happens.... Can not enter calander data... What am I doing wrong?

When I go the calander and double tap nothing happens.... What am I doing wrong?

There should be a + sign in the lower right corner. Tap that to add an event. If there is no + sign - go to Settings>iCloud>Calendar and toggle the setting on and off.
If you want to sync your calendar with iCloud - leave it on - but don't sync the calendar from your computer or you may get duplicate entries.

I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

I purchased FrameMaker 10.0 Windows Upgrade License from FM9 and I can't find the download for this.

Get in touch with support if it doesn't show up on your Adobe account.
Mylenium

Track Pad single tap and double tap not working

Dear All,
I have a MBP A1226 model with intel 2.2 GHz Core 2 uo processor. With Mac OSX ver 10.8.4.
My system had developed a snag, was not booting up. I booted up thru the rcovery disk and after the disk repair did not help, did a drive erese and a fresh install.
All seems to work well except that the trackpad does not respond to single aswell as double tap. Scrolling is working fine.
Help to resolve this issue will be appreciated.
BTW trackpad was functinal before the snag.
Regards

I suspect the trackpad settings were reset when you did your fresh install of Mac OSX.
to fix this, open up Settings>Trackpad>"Point & Click" tab.
Here you will find tons of settings that wil let you customize how your trackpad works. More specifically, you will want to enable "Tap to Click".
Hope this helps!

I'm trying to print Checks with Quicken. the print is 1/2 way across check with single and doubles

My printer is the HP Laserjet 1102W When I load a single or double check into the manual feed vertically taken from a 81/2 x 11 sheet of checks Quicken prints so that only the date and amount show up in the middle of the check. I have used these checks for years with the manual feed on a Laserjet 4 Plus. How do I get the printing to move so that it covers the whole check?
Howard Wexler

Bobreba wrote:
I am using Quicken Essentials 1.7.4 on a [Mac Pro, 2.8 Ghz Quad Core Intel Xeon with 16 Gb of memory], running 10.7.5. I am in the process of upgrading everything to work on Yosemite and Quicken seems to be the most difficult problem to overcome.
Thanks for your response and feedback.
I would recommend you continue with Quicken Essentials. As noted by others, it performs well on Yosemite.
My personal experience is Quicken 2007 for Mac also on 10.7.5 (with many reports of it both updated and successfully running on Yosemite) and I personally would not touch Quicken Essentials with a 10 foot pole -- BUT, if it ain't broke for you, don't fix it!

Hyper sensitive trackpad and double tap minimizes

I wonder if the trackpad on the new MacBooks has not become too sensitive now? Sometimes I am just hovering over it with the fingers, not touching, and it acts like I have been tapping, closing windows, popping up menus etc. Another in here asked for the options to set the sensitivity and it does not exist, but he got the advice to choose an option he could not find in the Sys Prefs and neither can I, something which has to do with ignoring accidental clicks.
Could it be that they have forgotten to add that option in other languages? I run my Macs with Norwegian set as primary language.
Another odd thing is that the option to double tap to drag does not work, either. When I double tap (with one finger) it minimizes the window and send it into the Dock...
Anyone else who have experienced oddities with the trackpad and is there a solution? Otherwise, it works well enough.

All updates have been installed and I guess you think of the firmware and the other which came one after another. It is actually after those I noticed the increased sensitivity. As for the minimizing, it seems like there is a very fine difference between touching and tapping twice. Sometimes it works to drag and sometimes it minimizes.
Well, it is a minor problem but I got curious as someone replied to another topic here that there should be an option to ignore accidental input, but I haven´t found that option in Sys Prefs and wonder if that has been forgotten in the Norwegian localization...

Windows 10 upgrade stopped touchpad single and double tapping

Similar Messages

Maybe you are looking for