WIndows 10 upgrade stops after final upgrade circle at 0% on envy dv6 7245us

The Windows 10 upgrade downloads successfully, goes through various gyrations, then displays the final big upgrade circle at 0% and aborts, then rolls back to Windows 8.1. I have tried all sorts of things from the various forums, including Microsoft's with no luck. Has anyone successfully upgraded the HP Envy dv6 7245us (with AMD A10 processor) model to Windows 10? Or had similar problems? Thanks, noid63

Hello , I understand that you are wondering what the effect of your recovery media will have on your Windows 10 operating system, and I would be happy to assist you in this matter! Since the recovery media you created is designed for Windows 8.1, as well as the Recovery Parition, a new system recovery in the future will the operating system back to Windows 8.1. Once recovered, you will need to re-install Windows 10.  As a recommendation, I would suggest holding off on a Windows 10 update since there are no supported drivers available for your system in Windows 10 at present. This should help to avoid any driver conflicts you may encounter upon upgrading. I hope this helps! Best Regards

Similar Messages

  • Upgrading video card on HP Envy dv6-7251er

    Hello i`ve HP Envy dv6-7251er laptop C0V61EA, i7-3630QM, Intel HM77 Express, L3 6 МБ, 6 gb DDR3, NVIDIA GeForce GT 630M 2gb ddr3
    1. I`d like to upgrade my video card on more powerful, so tell me please what is part model of video card i can change without change motherboard?
    for example: GeForce GTX 680M or GeForce GTX 760M or radeon ..........
    2. I use router zyxel keenetic giga 2, but standart drives do not detect my router, so how i can detected my router and how  i have wi-fi connection (signal)?
    Best regards
    Man212

    Hi:
    There are no video "cards" in today's notebooks.  All of the graphics chips (GPU's) are soldered to the motherboard.
    A notebook PC is much different than a desktop. You can't just swap out one video adapter for another.
    The only other supported motherboard that your notebook could support, is one with the nvidia GT 650 GPU chip on it and the cost of upgrading would not be worth it.
    Yes, you can post your second question maybe in the notebook wireless section would be best.
    Best Regards,
    Paul

  • Playback in Preview window stops after about 1 second

    Hi,
    When I hit the spacebar to view the clip in the preview window, the playback stops after about one second each time. It goes smoothly, then after one second, it stops. I can however drag the slider across the time line and there seems to be no problems.
    I'm sure I have a powerful enough computer, so I don't think it's something to do with ram (I have 6 gig ram, Vista, triple core processor, good graphics card... brand new computer bought yesterday)
    I'd appreciate help with this.
    Thanks!

    I'm not sure what you mean... I am importing from a DV tape which was recorded onto by a MiniDV Camera. When I plug in the camera to my fire wire, Windows gives me the options of AVI and WMV format (I am not sure which one to go with by the way, but WMV format seems clearer and 5 times smaller too.. why is that?)
    Any ideas?
    Thanks again
    EDIT: Also, I borrowed some video files on the net and premiere does the exact same thing- stopping after one second :/

  • Windows media player stop working after upgraded from firefox 6.02 to Firefox 7.01 yesterday.

    windows media player stop working after upgraded from Firefox 6.02 to Firefox 7.01 yesterday.
    the plugin for win media player is already installed and working fine in FF 6.02 before upgrade. i have Google this issue without any result so far. so i reinstalled the old version 6.02, until fix is found.
    anyone has the similar issue with Firefox 7.01 in Win 7 32 bit ?

    The issue was not with FF 7.01. VLC player version 1.11.1 is conflicting with windows media player when FF 7.01 tries to play media files! Which was not happening before in FF 6.02.
    VLC and plugin media player need to be uninstalled first, then uninstalled FF 6.02. Install FF 7.01 and then win plugin media player again.
    Test media player at www.vdat.com/techsupport/windowstest.asp

  • USB Sync stopping Windows 7 upgrade

    When I purchased my Compaq CQ5110F (Vista) it was just immediately before Windows 7 came out but my previous one crashed so I couldn't wait and was given a Windows 7 upgrade package. As Vista suited me and I've been working with it until now ok but decided to take the plunge and upgrade. I've done all of the updates, backups, whatever, and went to install just now and it's telling me that the HP USB Sync is stopping the upgrade, although when I printed out the whole 12 pages of the compatability report, that wasn't specifically mentioned. I had previously had an HP Ipaq which was syncd to the computer but I uninstalled it yesterday as I no longer use it. When I look in the Sync Center there is nothing in there and I can't find anything that just says USB Sync - so now I'm stuck with the upgrade, it won't go further and I don't know what to do - other than abandon the upgrade, can anyone help?  I'm off work at the moment so it seemed the ideal time to do this ...   Many thanks.

    I've finally managed it and everything seems to be working well without removing any further things, and re-installing -with the exception of Quickbooks 2010.  I did get it to open but there was a constant box saying Windows was trying to configure QB but was failing.  I'm closing it down and see if it does the same thing tomorrow but am I correct in assuming I'll need to uninstall it - that always makes me nervous.
    A further question nothing to do with tech things - when I first registered it said I was a guest, now it says I'm a student, I didn't put that in and don't see where I can change it in the profile??

  • Ideapad z400 touch after windows 10 upgrade

    I am using the ideapad z400 touch and have been upgraded to windows 10. "Intel graphics card => I reinstalled the windows 8.1 driver from lenovo site", and my brightness problem is solved. I am facing the problem with the intel HD graphics 4000 display driver that I install from lenovo site. The driver seems like not fully compatible with windows 10. My screen will turn off after 5 minutes and when I move the mouse to wake it up I face the problem, the screen will freeze for a while and start to wake up and showed me the message "intel display driver.....has stopped responding and has recovered" This happens everytime after my screen turn off. Besides, my pc can't go to sleep mode. When I select sleep for my pc, the screen went black and it takes a long time to sleep but actually it is not, then it will shut down on its own. I have to press the power button to turn it on again. I think this problem is also related to the display driver. I have no problem with this display driver on windows 8.1. Will Lenovo come out the new driver that compatible with windows 10 from Lenovo site? The latest operating system they provide the drivers is untill windows 8.1. If they do not support the windows 10 driver I will roll back to windows 8.1 with no choice but I sincerely hope that I can keep using windows 10 on my pc I like it. Microsoft gives us one month time to roll back to windows 8.1. I don't know can I upgrade to windows 10 again if I found that Lenovo comes out their new drivers

    Hi there ,  Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. I read your post on the HP Support Forums and I understand that you are having an issue with the Touchscreen on your HP Notebook - 15-ac020nr. You had mentioned that since your Windows 10 Upgrade, it no longer works.  Have you tried doing all updates (Windows, HP Support Assistant, BIOS)?Have you tried restarting the Notebook a couple of times?Have you tried to run the Windows Troubleshooter? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system that need updating for Windows 10. The HP Support Assistant will also help find a proper driver for you to use.  Updated Windows 10 drivers will become available on the HP Drivers and Downloads Page for your product. They will be released as they become available to HP. I did find a troubleshooting document for you called Touch Screen Issues. Although it does say it is for Windows 8, it will still work for Windows 10.  Please follow the provided troubleshooting steps and re-post with the results.  Have a great day!

  • Skype does not recognize my headset after Windows 10 upgrade

    Hi everyoneSkype stopped recognizing my headset after Windows 10 upgrade.  I've tried the solution deactivating the "Allow applications to take exclusive control of this device" option. No success.  The headset works on my other Windows 8.1 laptop and my Cellphone. Other applications, including Windows 10 microphone setup for speech recognition work. Here is something strange though.  When I open up Skype audio tools and tap the microphone between thumb/finger Skype detects this and shows 4/5 green bars.   Any ideas? 
    Voiceless in Vancouver

    Your upgrade haven't changed the drivers properly.
    1. Just go to Device Manager and delete the audio drivers.
    2. Then restart your pc and switch on the internet.
    3. Your drivers will be automatically installed by Windows Update.
    ** If your problem is solved then Mark this as Answer! **
    ** Please give Kudos If you want to Thank Me! **

  • Won't sleep after windows 10 upgrade

    After the windows 10 upgrade, laptop won't go into sleep mode completely as before.Most often I've to put my laptop in sleep and then resume my works ASAP but after upgrading to windows 10, it is so painful to start/force-start the lappy everytime.!! The power light blinks fastly and the sudddenly stops in the last thereby putting laptop in freeze/shut down state!!I've updated all video audio drivers.Continuosly am going on installing all the Windows System update coming out daily, still nothing works out.Somewhere I read, the problem is in BIOS driver, I'm not that tech guy so I'm totally in the dark.Some one please help me out.

    I just remembered that when it was in the blue screen loop the error that it was reporting was WDF _ VIOLATION.

  • Iq524 touchsmart software update after installing windows 7 upgrade

    After upgrading to windows 7 , and opening up the touchsmart program, there are icons at the bottom that look identical for the webcam, hulu, and the browser. They look like a picture of a monitor( blue and white) with a hand and finger pointing upwards. When you drag them to the area above, there is nothing there except a black screen. The icon is gone from the bottom tray. When you left click on the black screen. a small circular moving halo appears and then it just stops. I have upgraded all the drivers, one at a time as suggested in some earlier posts. Is this an hp software compatability problem with windows 7. Makes you want to go back to Vista Home Premium that came with the IQ 524 model. Any divine guidance?

    I gave up on windows 7 upgrade.  Venders for some devices have not even supplied drivers for some things yet.  Very untimely and too much of a rush to windows upgrade always a problem.  "If not broken don't mess with it."  Someone said that awhile back and that is the best advise.

  • Satellite A300D-15B - Webcam won't work after Windows 7 upgrade

    My webcam doesnt work after Windows 7 upgrade. I have installed the drivers but still having no luck

    Hi
    The webcam is listed in device manager under the Imaging devices
    There you should see USB Video Device.
    If its not listed there, then I think that the device malfunctions or its disconnected.
    The webcam is an usb device and its connected to USB controller.
    I read in different threads that in some cases the cable could be loose and therefore the webcam would not be listed in device manager.
    I such case the display lid needs to be disassembled and the cables should be checked.
    In my opinion its a job for an technician.

  • After upgrade to 10.8.1, Internet access stops after approx. 50MB of traffic.

    I upgraded to Mountain Lion, and when I started upgrading OS components and other apps, downloads would stop after about 50MB. Once this happens, all requests in internet browsers also lost internet access. If I turn Airport off and then on again, I can access the internet but the same problem occurs again once I continue other downloads.
    I have other computers and they don't suffer from this problem, so I know if is not my internet provider or my wireless network.
    Any ideas?

    Me too! I'm also getting display problems in emails where scrambled graphics are overlaid interactive parts of emails like dates telephone numbers!

  • Restore Computer Back to Vista after Windows 7 upgrade and back again?

    I got Satellite L505-S6946 that came with Vista Home Premium installed (I immediately made backup-5 disks in all). I got the free Windows 7 upgrade disk from Toshiba and upgraded my laptop. I messed up and did not make the backup disks like I should have. I had to reinstall windows 7 more than once (shouldn't let others use my computer!) and it hasn't seem to run quite the same after reinstall. I also noticed that for a driver Intel ICH9 Family SMBus Controller 2930 it says no device driver installed. I didn't notice that before. And I have tried to install it. Whatever the cause, to me it just doesn't seem to run the same. I was wondering if I could go back and reinstall Vista from my disks and then upgrade to windows 7 with my upgrade again (and this time make backup copy!)? I apologize in advance if this is a stupid question but I am not really computer savvy. Thank You. Jakey58

    Satellite L505-S6946
    Just adding my two cents worth...
    We have lots of machines running Windows Vista. (I'm typing this message on one.) They work just fine. I never even consider upgrading them to Windows 7.
    Just because the Geeks don't like Vista and just because Microsoft wants you to use the latest and greatest doesn't mean you must upgrade.
    I've heard some people put solar panels on the shady side of the house where the neighbors can see them.
    -Jerry

  • In ADDin JAVA upgrade , SAPJup is getting stopped after CHANGE_UME phase

    Hi ,
    We are upgrading our ECC 5.0 (ABAP + JAVA) to ERP2005 EHP4 SP level 5.
    In the Downtime phase of the upgrade, SAP Jup is automatically getting stopped after CHANGE_UME phase. I am not able to find out the error. Why it is getting stopped even i started it many times, it goes to the CHANGE_UME phase then automatically stopped.
    There is no error in CHANGE_UME_***_09.LOG file.
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7185 - 630]/>
    <!NAME[J:\DV2ERPUpgrade\jupgrade\log\CHANGE_UME_***_01.LOG]/>
    <!PATTERN[CHANGE_UME_***_01.LOG]/>
    <!FORMATTER[com.sap.tc.logging.ListFormatter]/>
    <!ENCODING[UTF8]/>
    <!LOGHEADER[END]/>
    #1.5 #C000AC101E650000000003F25B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:758)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:758)#Java###Phase has been started.#1#UPGRADE/UPGRADE/CHANGE_UME#
    #1.5 #C000AC101E650000000003F35B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:759)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:759)#Java###Phase type is .#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling#
    #1.5 #C000AC101E650000000003F45B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#Java###  Parameter =#2#connect#standard#
    #1.5 #C000AC101E650000000003F55B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#Java###  Parameter =#2#inputFile#UMEHandling.xml#
    #1.5 #C000AC101E650000000003F65B6DF84B00048B183E648670#1278836149094#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:412)#Java###  Parameter =#2#action#change#
    #1.5 #C000AC101E650000000003F75B6DF84B00048B183E64FF88#1278836149125#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:233)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:233)#Java###Checking phase parameters .#1#action, connect, inputFile#
    #1.5 #C000AC101E650000000003F85B6DF84B00048B183E64FF88#1278836149125#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:249)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.checkParameters(PhaseTypeUMEHandling.java:249)#Java###Phase parameters have been checked. All required phase parameters have been set.#1#3#
    #1.5 #C000AC101E650000000003F95B6DF84B00048B183E6578A0#1278836149156#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.execute(PhaseTypeUMEHandling.java:169)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.phases.PhaseTypeUMEHandling.execute(PhaseTypeUMEHandling.java:169)#Java###Backing up UME settings from configuration manager.##
    #1.5 #C000AC101E650000000003FA5B6DF84B00048B183E6578A0#1278836149156#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Reading properties of service on node .#2#com.sap.security.core.ume.service#server#
    #1.5 #C000AC101E650000000003FB5B6DF84B00048B183E66E7D0#1278836149250#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Batch config tool has been initialized.##
    #1.5 #C000AC101E650000000004025B6DF84B00048B183EA4A868#1278836153297#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Reading properties of service on node .#2#com.sap.security.core.ume.service#ID8895050#
    #1.5 #C000AC101E650000000004035B6DF84B00048B183EA4A868#1278836153297#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/CHANGE_UME##com.sap.sdt.j630.configutils.ConfigUtils630#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j630.configutils.ConfigUtils630#Java###Batch config tool has been initialized.##
    My ABAP upgrade is ruuning fine in the downtime phase.
    Please suggest me ASAP.
    Thanks,
    Chetan

    Hello - we are facing the exact same problem while uprading a dual stack system.  How did you fix the problem?  We also opened up a ticket to SAP and we are waiting to hear back from them.  Any information you can share will be greatly appreciated.  
    Thank you.
    Nameeta

  • Windows 10 upgrade failure - after upgrade at login no matter what password I try they all fail

    After allowing the Windows 10 upgrade to run I am unable to login to the PC. It will not accept my previous PIN, or passwords. I went to the change password website and changed my Microsoft password but that doesn't work either. Then Microsoft tech support told me to contact HP for recovery tools. The upgrade on my laptop removed the recovery partition I thought I could fall back on if the upgrade did not work. Can anyone help?

    I'm also having the same problem. Microsoft Tech were absolutely useless, I think they are getting frazzled by all the incoming problems.
    Hopefully HP can sort this for all of us.
    Not only is my old and new password not being accepted
    I am also being told I am offline, so plug directly into NBN modem and still the same
    Plus my icon to do restart, power off or sleep has now gone
    Stuck with a useless Windows 10 log in screen, all my work is locked and I'm starting to panick now
    One last thing, Microsoft got me to download MediaCreations so I could reboot to fix problem, but again didn't work for me, might work for someone else

  • Why has page scrolling with touchpad stopped after upgrade?

    I use an Acer Aspire 7540 laptop. Page scrolling with the touch bar seems to have stopped after I upgraded to the latest version of Firefox.

    http://www.bulletsandbones.com/GB/GBFAQ.html#scrolltimeline
    (Let the page FULLY load. The link to your answer is at the top of your screen)

Maybe you are looking for