Windows 10 Upgrade, Touchpad no longer works on laptop

I upgraded my HP Mini 110 from Windows 7 Starter to Winows 10. It runs fairly smooth but my BIGGEST complaint is that my touchpad no longer responds to taps and scrolling. I used it for just about everything and now I have to use the Left or Right buttons to navigate. FRUSTRATING!!Are there any updates, drivers, patches or Mr FixIt for this? Thanks! -Armando

How did you manage to upgrade to Win 10? I am told graphics will not support it. When I try and update graphics driver I get a failure saying a sub key is not found! Did you have problems with graphics compatability? Regards

Similar Messages

HP Pavilion dm3-1035dx entertainment notebook/PC's touchpad no longer works?

Hello.
I have a HP Pavilion dm3-1035dx entertainment notebook/PC that hasn't been used for over an year or so. I finally used it again today, but its touchpad no longer works. I researched on the web and found out that others have this problem, but with its sleep mode. Obviously, mine was one was off and not asleep. I also read there is a BIOS update to fix it. I tried that and it didn't fix the problem.
The button between the space bar and touchpad always show white color. Pressing it doesn't seem to do anything (color doesn't change and no changes). I also noticed the preinstalled 64-bit W7 HPE's Device Manager does not seem to show this touchpad. I also tried a Windows 7 PE boot CD and its mouse didn't work either. Both installed OS and the boot CD used to work with its touchpad.
Is this touchpad dead? Is there anything else to check?
Thank you in advance.

I guess battery might have gone bad and needs to be replaced. Download and Install HP Support Assistant from here and follow instructions from below link to run a test on your battery
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00821536&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

After upgrading to Windows 8.1 firefox longer works. I got it to load but screen is either blank or doesn't go to target address

after upgrading to Windows 8.1 from 8 nothing works correctly. Firefox 1st received 'unable to load XPcom' After resetting and uninstalling several times Firefox now loads to either a support screen or blank screen. It accepts address input but doesn't execute to target. So far I have been unable to roll back upgrade.
Although IE11 works, it doesn't work correctly.

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
If you keep having problems then do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 24: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

GT70 keyboard and touchpad no longer working [Windows 7]

I've had this machine for nearly a year without any problems, but yesterday my keyboard stopped working. No keys at all are registered in Windows when I type. The keyboard seems physically ok, however, since I am able to get into the BIOS setup menu and boot menu, etc. Just once Windows launches it stops working.
Symptoms:
- Keyboard will not work in Windows.
- I've noticed that the touchpad does not work either.
- I can enable/disable touchpad from S-Bar, and the physical enable/disable touchpad button's light will change, but the touchpad does not work.
- An external mouse works correctly.
- An external keyboard works correctly.
- My machine boots up with Wi-Fi turned off now (that never happened before). I am able to turn it on via S-Bar.
What I've tried:
- Shutting down, removing battery and power cord, and waiting an hour (to reset EC controller? (read that somewhere) )
- Uninstalling the "PS/2 Keyboard" entry from Device Manager.
- Rebooting many times.
- Booting into Safe Mode (keyboard does not work even in Safe Mode)

I haven't installed anything recently, but I did just discover that the keyboard (but not the touchpad) will work after waking the machine from sleep. I usually put the machine to sleep when I'm through with it instead of restarting it, so it could have been something I installed a while ago.
I have done multiple virus scans, both with Norton and Malwarebytes, so I don't think it's malware.
I just can't figure out what kind of software could make something as basic as a keyboard stop working.

Synaptics Touchpad No Longer Working Properly

Hello Internet!
Hear my plight and tremble: I just recently updated my Synaptics touchpad drivers from the official manufacturer's website. Prior to the update, I could double tap the top left of the touchpad to enable and disable the touchpad. This was a convenient feature that I have grown quite fond of. However, after the update this feature no longer works! I am so devastated... I really enjoyed watching the pretty light outline of my touchpad turn to an evil red when it was disabled. I suppose that I could revert the drivers back to their old form, but I wanted to check if anybody knew a separate fix so that I could have both the new drivers and the old functions that I so cherished.
My model number is: A6Y49UA#ABA
My operating system: Windows 7
Thanks for your help, I'll remember you when I'm the dictator of the world.
This question was solved.
View Solution.

Hi @El-Nacho ,
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I see that you upgraded your driver from the manufacturer's site. HP only recommends the drivers listed on the HP driver page. These drivers have all been tested and known to function correctly.When you install drivers from manuacturer's site, they may or may not function correctly with your notebook. OEM can and do sometimes alter a driver so that it functions correctly with your exact notebook.
Downloading or Updating Software and Drivers for HP Computers
If you did not have an issue with the old driver, I suggest you do a driver roll back.
Version 15.3.11.0 is the recommended version for your notebook and Windows 7.
Here is a link to the driver download page should you require it. HP Pavilion dv6-6c10us Entertainment Notebook PC Drivers
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Installed update 2015-002, and Connection to Windows FileShare is no longer working

Installed update 2015-002 (10.10.2 ?) to MacBook Pro running Yosemite, and CFS connections (Windows file share) connection no longer works properly. It was working without any problem just before the upgrade. Can I go back or uninstall the upgrade, until this problem is fixed? This seriously impacts me at work...

Hello DaveT001,
If you feel that the update is causing you and issues you can always reinstall OS X Yosemite. To do that, take a look at the article below to walk you through how to do that. Then it is a matter of updating your system to what you want it to be.
OS X Yosemite: Reinstall OS X
https://support.apple.com/kb/PH18872
Regards,
-Norm G.

"Activity window" in Safari no longer works to download YouTube videos. Why not? Workaround?

For years I have used Apple's recommended standard technique whenever I wanted to download a Flash video embedded in a YouTube page to my hard drive:
- Open a YouTube page and click on the video's "play" button to get it started;
- Press command-option-A to then open up Safari's "Activity Window" which lists all the components of the page;
- Find on the list the component for the loading Flash video, which is usually much larger (measured in MB rather than KB) than all the other components, and also is usually still in the process of loading, so it's easy to spot;
- Double-click the component's name on the list in the Activity Window, and voila, the video downloads to my hard drive.
This "trick" is described everywhere as THE standard way to download YouTube videos (and similar page components); and I have used it successfully for many years.
HOWEVER, sometime very recently (not sure when, exactly -- a few weeks or months ago) YouTube has changed the way its pages are coded, so that this technique no longer works. When I open the Activity Window, instead of seeing one large loading video file that's easily identifiable, I see a whole series of large files, all exactly 1.7mb big (no matter how large the file size of the actual video in question is), and they constantly increase in number -- at first there are two such files, but over the seconds and minutes more and more appear. Furthermore, many files with no named size are constantly loading and then disappearing. And here's the whole point: I've tried double-clicking on ALL of these files, dozens of ways on dozens of YouTube pages, and none of the are the video file I seek and none of them cause the file to download to my hard drive.
If I click on one the mysterious 1.7mb components, I indeed get a ".flv" downloaded to my hard drive, but it's not actually a Flash video; clicking on its downloaded file icon just brings up a blank box or an error message saying that it's not really a video file at all. I think it's some sort of "decoy" file or something to do with streaming Flash code.
To see what I mean, just go to YouTube, load any random video page, and then open Safari's Activity WIndow and try to download the video that way.
This happens on an iMac running Safari 5.1 on OSX 10.6.8, and also on a MacBook Pro running Safari 5.0.2 on OSX 10.6.5, and on a few other new-ish Macs I tested it out on, but failed to note their version numbers.
I'm presuming that this problem is not specific to my computer, but is caused by the way that YouTube altered the background code for their pages. I don't know if the glitch is an intentional attempt by YouTube to prevent downloads, or if it is an accidental "bug" of the new code. Either way:
How can I fix the problem? Is there some other lesser-known built-in way for Safari/Mac to download the new kind of YouTube videos? Or is there some reliable freeware or shareware or plug-in or extension or whatever for Safari that would enable YouTube downloading?
I tried a freeware program called "Evom" that was highly touted, but it too was thwarted by the new YouTube code and failed to extract any videos from the YouTube page, even though that's what the application was designed to do.
As a side note, I will say that I also have (though rarely use) FireFox for Mac, and the "Unplug" plug-in installed on it, and that ALSO "broke" recently and no longer has the capacity to recognize or download YouTube videos, even though previously it worked fine. This is why I think the issue is not specific to my set-up or computer, but is due to a change in YouTube's underlying code.)
Any help with an explanation, solution or workaround would be much appreciated (by me and by millions of others who I assume are facing the same problem!).

Carolyn:
I just now did exactly as you recommended. Result? No change.
Even after trashing the files and restarting and everything else, the Activity Window and YouTube behave exactly as they did before.
(I had actually previously tried something very similar to your recommendation, and it didn't have any effect then either.)
In case it's helpful, here's an example of what one of the mystery components that load endlessly in the Activity Window is listed as:
http://s.youtube.com/s?rendering=software&lact=102489&decoding=&rt=112.382&et=11 0.829&tsphab=1&st=69.939&tspne=0&tspfdt=262&nsiabblmin=62945.000&nsidf=2&tabsb=1 &ad_flags=0&h=360&nsiabblmean=72646.865&md=1&docid=zPxFu7taftE&bc=15194849&csipt =watch5ad&ad_event=3&el=detailpage&hasstoryboard=1&vid=72A5TVVpDgRoXDV3HvMeKPjLx BFdU61DC&fmt=34&cr=US&sd=BD075E8E6HH1336502192683396&vtmp=1&nsiabblmax=79054.000 &hl=en_US&ns=yt&nsivbblmax=774478.000&referrer=None&sidx=0&hbd=7790924&w=480&hbt =2.751&cid=6&sendtmp=1&sst=0&cfps=25.974025974025974&screenw=1440&mt=0.6&vq=auto &playerw=640&playerh=390&slots=sst~0;sidx~0;at~2_3&scoville=1&at=2_3&volume=100& art=1.842&mos=0&plid=AAS_iqoqfi0mjNc0&fs=0&nsivbblc=208&nsivbblmin=561638.000&bd =931267&allowed=1_1,1_3,2_1,2_3&bt=7.441&fvid=bNz97ILtwqc&screenh=900&len=127.92 &vw=480&nsivbblmean=668895.024&nsiabblc=208&vh=360&fexp=912001,914050,913539,919 306,907217,901802,906507
And here's one of the 1.7MB components:
http://o-o.preferred.comcast-lax1.v11.lscache8.c.youtube.com/videoplayback?range =1781760-3563519&expire=1336524839&id=ccfc45bbbb5a7ed1&burst=40&cm2=0&sver=3&upn =I_VxE0Lmh4Y&keepalive=yes&ipbits=8&algorithm=throttle-factor&itag=34&sparams=al gorithm%2Cburst%2Ccp%2Cfactor%2Cid%2Cip%2Cipbits%2Citag%2Csource%2Cupn%2Cexpire& source=youtube&signature=6F9B5B2CA58ACBA6AFE02FB8A54F1F74EE2B0F16.8E421BC37C3019 E806C22CF3E8866847D033565C&factor=1.25&ip=71.0.0.0&cp=U0hSS1VNUl9IU0NOMl9NR1ZJOm lxNTVmbm1vcDlO&key=yt1&fexp=912001%2C914050%2C901802%2C906507%2C907217%2C919306% 2C913539

After upgrade Script No Longer Works

After I upgraded CS4 to .605 my script no longer works. I get:
Error Number:45
Error String: Object is Invalid
Line 12
Source: myParStyle.baselineshift = -1;
Here are my first 12 lines:
var doc = app.documents[0]
var color = doc.colors.item("C=100 M=65 Y=0 K=0");
var inlines = doc.stories.everyItem().textFrames.everyItem().getElements();
for(var i=0;i<inlines.length;i++){
    if (inlines[i] instanceof Group){continue}
    if(inlines[i].fillColor != color){continue}
    if(inlines[i].contents == ""){continue}
    inlines[i].convertShape(ConvertShapeOptions.CONVERT_TO_RECTANGLE);
    myChangeCorners(inlines[i], 0, .3, "fourth point");
var myParStyle = doc.paragraphStyles.item("Tab_HeadB_KO");
myParStyle.baselineShift = -1;
What do I need to change to get this to work again?
Thanks,
Rob

So it's still somewhat a mystery, because that particular command didn't change from CS4 to CS5.
Can you try the 'fix' mentioned here? CS5 issues

Windows 7 Disc no longer working in DVD drive

Macbook Pro OS X 10.9.1
2.5 GHz Intel Core i5
4 GB 1600 MHz DDR3
Hi,
I have an unusal problem that I have found several cases on throughout the forums but none have given an answer and I'm hoping someone here could help me.
I bought an official Windows 7 disc not long back and installed it onto my Macbook Pro with no problems. Since then I removed the Windows partition, mainly because I wasn't using it.
However, there are several Windows games that I'd like to play and so I would like to repartition Windows 7.
My problem is that the drive won't read the Windows 7 discs, not the 32 bit or the 64. When I push it into the drive I can here it begin to spin and slow down several times before it is ejected.
I've tried cleaning the discs and using a drive cleaning CD. The drive accepts all my other DVDs and CDs without a problem, just not these.
This is my first Mac device so I'm a bit of a Mac Mong. I'm hoping it is someothing obvious.
Thanks in advance for any help that may be offered.
Cheers
Shaun

does your machine have an integrated superdrive? if not, skip the disk and download an ISO from below and use that in boot camp assistant.
http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/

Windows Shortcut Keys no longer working!?!

Hello All,
Framemaker 8(p277) has recently decided that after a period of use, standard windows shortcuts will stop working (ctrl+v / ctrl+c / ctrl+z!!! etc..) along with keystroke / character repeats.
This only occurs within framemaker. Windows short cuts and keystroke repeat still function correctly in all other apps running at the same time
right-clicking and selecting copy / paste / etc.. still works.
Un-installing and re-installing the most recent framemaker patch seemed to temporarily fix the problem, however, it has now returned.
I'm running xp Sp3, fully patched...
and the repetitious arrow-key bashing that I'm now having to do is slowly driving my co-workers INSANE :)
please help!
brad

Brad:
My experience with the problem is that it's been around since version 5 of the product.
I've observed that the problem seems to occur if I double-click on an embedded graphic, thus opening it in a third-party graphics program (PaintShop Pro 7). That is to say that on days when I don't work with graphics, I can run FrameMaker for hours and never have any CTRL key problems.
When the problem does occur, I must perform one of the following to restore function-key operation, in order of preference:
Exit and restart FrameMaker (easiest but doesn't always work)
Log off and then back in to Windows (somewhat more time consuming, works almost all of the time)
Reboot (time consuming, but always works)
That's my experience. Other forum regulars have had different experiences...
Cheers & hope this helps,
Riley

Multitap on touchpad no longer works after Xorg 7.4 upgrade

After upgrading to Xorg 7.4 I can no longer use a two finger tap to middle-click, where I could before. Two finger scrolling was on by default somehow, but turning that off didn't help. How can I get middle-click back.

Hotplugging is off. Both old and new xorg.conf are at http://pastebin.com/m23c8ea46
Not sure which fdi files to look for, but I've never made any changes to them.

G530-4446 - Win7 - Scroll on touchpad no longer works

Hey, I recently had to reinstall Windows 7 Ultimate on my G530-4446. My touchpad works, but the scrolling doesn't. When I go to Control Panel > Mouse - I notice that the settings are no longer there to control the scrolling. I remember there was a driver I downloaded previously that corrected this issue, but cannot find it anywhere (I've been searching for 2 solid days now). If anyone could help me out, I would greatly appreciate it. Thanks in advance for any help you can provide.

hi mcal,
May I ask about other feature did that driver put back some other feature no your touchpad?
I would suggest doing a clean install of that driver.
try to look first under control panel Programs and features look for a synaptics software the un-install it.
After that do a restart and reinstall the Driver again.
also try to access the Setting under mouse properties
and check if the scrolling are enabled.
link to sample photo
that photo may not be exactly the same but that should give you a hint on where to check.
Hope this helps,
Cheers!!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Touchpad no longer working on hp pavillion dv6 after disassemble

So, I went ahead and spilled a little bit of coffee on my laptop. Not much, but as an extra bit of precaution, probably a bit too much, I disassembled it and let it dry. Everything works perfectly now except for the trackpad. The LED border is lit up, but the cursor stays frozen on the screen. I'm able to connect a usb mouse and operate the machine just fine and dandy ... but I'm curious if I'm missing something. Is there another cable I'm missing? Or is there just the one? Could it be that the cable is just not secure?
Any ideas or insights would be appreciated.

Yes it is very easy to fail to get the ribbon cable fully inserted or even insert it into the zif connector incorrectly. I hate to admit but often have to open a laptop again after assembly to reconnect the touchpad.

HP Envy 15 x360 PC Windows 8.1 -Headphones not working on laptop

I'm having an issue with my headphones connecting to my laptop. When I plug my headphones into the audio jack the sound still comes from the laptops speakers not the headphones. I have looked in the sound options playback devices and my headphones do not appear. Also my computer won't automatically recognize the headphones when they are plugged in like it use to do.

Hello @slhaw,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how the headphones on your computer are not working, and I would be happy to guide you towards a resolution!
To restore the audio to your headphone jack, I recommend installing the original software and hardware drivers that first came with your computer. This can be done by following this document on Using Recovery Manager to Restore Software and Drivers (Windows 8), as well as Using HP Support Assistant (Windows 8) to update the drivers.
When the software reinstallation has completed, shudown the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
reference: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/No-Sound-on-HP/m-p/4669654/highlight/true#M...
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Windows Media Player no longer works with Tiger

I use Windows Media Player, but have upgraded to Tiger, now I usually get "The hardware license for this content is inconsistent". The content worked before fine. I deleted WMP and its prefs, reinstalled WMP, repaired permissions. Still no go. Ideas?

I've been looking at another thread with similar issues but different symptoms. You may want to post here what issues you've had:
http://groups.google.com/group/microsoft.public.windowsmedia.player.mac

Windows 10 Upgrade, Touchpad no longer works on laptop

Similar Messages

Maybe you are looking for