Windows 10 Virtual Box - Hyperthreading Not Supported on PC

I am trying to install Windows 10 in Virtual Box on my HP Pavilion DV6 running Windows 7 Home Premium x64. I set up the Win10 virtual machine following these instructions: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/how-to-install-windows-10-developers-preview-in/e98dd450-02d2-4519-b6a3-6743bedcf777
However, I am receiving the following error: 'VT-x/AMD-V hardware acceleration is not available on your system. Certain guests (e.g. OS/2 and QNX) require this feature and will fail to boot without it.' When I click continue, the VM provides the following
message: 'Your PC needs to restart. Please hold down the power button. Error Code: 0x0000000A Parameters: 0xFFD00000 0x000000FF 0x0000000A 0x8192F5E3'
After some further research, I found that I need to enable virtualization and hyperthreading. I downloaded Speccy and determined that my PC is capable of virtualization, and it was already enabled; however, hyperthreading is not supported. I have been hearing
good things about Windows 10, and I should really like to give it a test run. Is the error with Virtual Box or Windows 10 or Windows 10 running in Virtual Box? Is there anything I can do to make it work? Thanks for any help.

Similar Messages

Virtual Sound does not support my Satellite A100-998 with Vista

Hi.
I have Satellite A100-998, and yesterday i find for my laptop available new driver. I download Virtual Sound for my laptop and for vista and when i try install driver i have error "Toshiba Virtual Sound does not support your computer." Why
Ps. Sorry for my bad English, but please help me!

Hi,
had you "Virtual Sound" before? If no, then your machine has probably NO "Virtual Sound". But if yes, then check if you downloaded the appropriate driver for your machine, because there are some many variations of the machine you have, and some of these machines have absolutely different hardware.
Which operating system is on your machine installed?
Greets

Windows 8 OS is not supporting hp laserjet 1020 drivers

hello sir,
I am using windows 8 operating system but my printer is not supporting and unable to print any thing.
Is there any updates or upgrade facility available? Is there any other drivers for windows8?
can u please give me a suggestion and its urgent for me.
Thank you,

sorry, but this print driver (Laserjet 1020) is not yet supported on Windows 8
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

[SOLVED] virtual box (vboxdrv: not loaded)

I have installed virtualbox
pacman -S virtualbox_bin
and installed virtualbox_bin 3.0.0-2
/etc/rc.d/vboxdrv not found
When I run virtual box, it says vboxdrv is not loaded
what to do
Last edited by sant527 (2009-07-10 06:33:36)

For reference..
pacman -Ql packageName shows what files a package contains.
You might add | grep bin or something of the sort after it to find the binaries quickly (sometimes.. some files contain 'bin' in the title or a folder name, obviously)
that question has been asked many times before. please learn to use Pacman, the Forum (and corresponding Search functions), and the Wiki before asking questions, and edit your first post to append [SOLVED] to the title when you find an appropriate answer to your questions.. it will save those of us looking to help time and frustration if you do all of that. thanks.
Last edited by FrozenFox (2009-07-06 09:26:17)

HP Color Laser Jet CP2025dn Windows 7 driver does not support the built in duplexing hardware

Windows Printer Driver Version 5.0.3 does not support the printers built in duplexing hardware. This is true of the PCL5 driver, the PCL6 driver and the Post Script driver.
It does support manual duplexing (stand there and feed the printer after the first side prints).

Windows Printer Driver Version 5.0.3 does not support the printers built in duplexing hardware. This is true of the PCL5 driver, the PCL6 driver and the Post Script driver.
It does support manual duplexing (stand there and feed the printer after the first side prints).

When i edit my Pages in iCloud on a windows Machine it says not supported Browser.(Using Safari)

When i tried to edit my iWorks on iCloud on Windows 7 machine, on Safari browser, it said not supported browser.
I downloaded the Safari for Apple Website.
Version of safari is 5.1.7.
Can anyone help me on this.
Thanks.

Safari for Windows is not supported (or developed any more). You should use Internet Explorer 9.0.8 or later.
See: http://support.apple.com/kb/HT5436
Even on a Mac, you need Safari 6.0.3 or later, not Safari 5.

Calendar on Windows Vista on PC not supported by icloud

I can't sync Windows Vista calendar with ipad2 because it's not supported by icloud. Is there a workaround available or another calendar program I could install that will sync between the 2 devices.
Thanks.

You will need Outlook 2007 or 2010, it's part of MS Office

TypeLoadException: "Types from custom Windows Runtime components are not supported in desktop applications"

When trying to use a custom Windows Runtime component in a desktop application, a TypeLoadException is thrown.
Why aren't custom Windows Runtime components supported in desktop applications? Is this something that will change in the future?
Thanks,
Tom
luck favours the prepared

If you are targeting the .NET Framework 4.5 you could try to add a <PropertyGroup> element to your project file and a reference to the WinMD file as described here:
http://stackoverflow.com/questions/12136585/using-custom-windows-runtime-components-in-non-metro-applications
Thefull list of the WinRT classes that are available to desktop apps is available here:
http://msdn.microsoft.com/en-us/library/windows/desktop/hh920511%28v=vs.85%29.aspx#windows_runtime_classes
Please refer to the following links for more information:
http://msdn.microsoft.com/en-us/magazine/jj651570.aspx
http://stackoverflow.com/questions/12745703/how-can-i-use-the-windows-ui-namespace-from-a-regular-non-store-win32-net-app
https://software.intel.com/en-us/articles/using-winrt-apis-from-desktop-applications
Please remember to mark helpful posts as answer and/or helpful.

Import window dialog box does not appear

iMovie 11 - trying to import video files from HDD
Within iMovie I am doing the following:
Select File-> Import -> Movies...
... and then nothing happens. No dialog box to select a location. Nothing.
Please help!
Thanks
Ed
OSX Lion 10.7.1

Did you upgrade your machine from an install of Snow Leopard 10.6.8? Try running Disk Utility under the Utilties folder inside your Applications folder. And do Repair Disk Permissions.
And along the same lines of preventive maintenance also try deleting the iMovie preferences file. Go to your Desktop, and go to the Go Menu (while holding down the Option key) > Library > Preferences > com.apple.iMovieApp.plist (move that to the trash). Quit iMovie and open it again. It's possible one of these might get the Import dialog window working again.
Failing that, the other thing to try is create a new user account, and launch iMovie while logged in as that user. See if the import dialog window shows up from that new user account.

HT5639 Apple, you write windows 8.1 is not supported in Boot camp 5.

Do you know when it will be then?
Thanks in advance.

We are users like you. Apple will not see this. Send feedback:
Hmm, The Apple site has no place to submit BootCamp feedback, so I will just link to the generic iMac page:
http://www.apple.com/feedback/imac.html

Windows XP mode with Virtual PC will not install / two problems

Hello! I posted this on the Microsoft Windows Answers forums and a moderator there suggested I post it here instead. I also searched here for similiar problems but did not find anyone having the exact same problem as I am having. Also for
some reason it won't let me post links, so I had to remove them.
I have Windows 7 Pro (64 bit) and I want to follow the instructions here:
LINK REMOVED
to install and run Virtual PC so I can see if some legacy XP software I have will work.
I am using a Lenovo W520 laptop with an i7 at 2.4ghz with 8GB of RAM.
I followed step 1/step 2 and downloaded the 500MB file for Windows XP Mode. I installed it.
Problem #1: There's a note at the bottom of the page which says "Once you have installed Windows XP Mode, click the Windows 7 Start button then select All Programs > Windows Virtual PC > Windows XP Mode to begin setup. For information on how
to set up Windows Virtual PC and Windows XP Mode, check out "Running Windows XP Mode with Windows Virtual PC" on the Support and Videos page. "
I am looking at the All Programs view and there's absolutely nothing which says "Windows Virtual PC" or "Windows XP Mode". I go look at Programs and Features in the control panel and indeed, Windows XP mode is installed (and taking up 1.13GB).
I uninstall it and re-download the 500mb file and re-install it. It still doesn't show up in the All Programs view, doesn't add an icon to my desktop or quick launch bar, or do anything which suggests a way to start it. It resides in C:\Program
Files\Windows XP Mode, but there are no executeable files there.
Problem #2: Step 3 says "Download Windows Virtual PC". When I click on that button, the download starts, but never works (I tried multiple times, including after a clean reboot, with nothing except Internet Explorer running) ; I get an error
window which says:
"Windows Update Standalone Installer
Installer encountered an error: 0x80070422
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
What is going wrong?
Thanks.
Note; After posting this questio on Windows Answers, some related questions popped up and I read through them. One post points to a posting on the Sevenforums ->LINK REMOVED which suggests that Problem #2 is my real problem because I follow
along perfectly until step #5-E and then I get the 0x80070422 error message.

Problem 2 is the issue, without installing a virtualization program like WVPC, XP Mode can't be used.
Try this:
Method 1:
I would suggest you to follow the steps and check.
To start the Windows Installer service in Windows 7 checks the steps below.
a) Click on start.
b) Type Services.msc in the start search bar and press enter.
c) Scroll down and Double-click on the service named "Windows Installer".
d) Check the value in the 'Startup type:' field.
e) If it's currently set to "Disabled", then this could cause the issue.
f) Change it by selecting "Manual" from the drop-down box.
Method 2:
Step 1: Make sure Volume Shadow Copy Service is set to automatic and started. To do this, follow these steps:
a) Click on Start-Run, type services.msc, the click on OK.
b) When the Services window loads, navigate to the “Volume Shadow Copy Service ", the double click on it to open it,
c) Make sure the "Startup Type" says "Automatic" and
started. If it doesn't, use the drop down menu to change it.
d) If it already says: "Automatic", then click on the "Recovery" tab at the top, and change the "First Failure" line to "Restart the Service", then click on "apply", then OK.
Step 2: Run Check disk to fix any bad sectors on the hard drive.
a. Click on start and in the start search bar type CMD, right click on the command prompt icon in the programs area and then click on run as administrator.
b. At the command prompt type chkdsk /f and then press enter.
Now, type in chkdsk /r
Note: CHKDSK would try to recover bad sectors on the hard disk, during this process there are chances of DATA loss from that particular sector.
Step 3: Disable the security software and then start the backup; follow the steps mentioned in the link below
Disable-antivirus-software
http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software
Important: Enable the security software back once everything is done.
Method 3;
“0x8007042c” error message when you try to start Windows Firewall
http://support.microsoft.com/kb/2530126
Note: The Microsoft Safety Scanner expires 10 days after being downloaded. To rerun a scan with the latest anti-malware definitions, download and run the Microsoft Safety Scanner again.
Note: Any data files that are infected may only be cleaned by deleting the file entirely, which means there is a potential for data loss.
“0x80070422” error message when you try to enable Windows Firewall
http://support.microsoft.com/kb/2617842

Windows Virtual PC (VMWindow.exe) does nothing but open a dialog box labeled user "Virtual Machines"

Windows Virtual PC (VMWindow.exe) does nothing but open a dialog box labeled <user> "Virtual Machines"
Running Win 7 Pro 64 bit SP1 on an Asus Z97 Pro socket 1150 mobo, with Intel VT-d both Supported and Enabled in the BIOS.

I am attempting to use Win Virtual PC as one would use VirtualBox or VMware Player.
I thought I stated my case clearly.
Are you proposing that Win Virtual PC functions ONLY to run Win XP in a virtual machine environment?
Bill
No, I just suspect you would like to install XP mode on virtual machine.
Supported guest operating systems in Virtual PC:
•Windows XP Service Pack 3 (SP3) Professional
•Windows Vista Enterprise Service Pack 1 (SP1) and later versions
•Windows Vista Ultimate Service Pack 1 (SP1) and later versions
•Windows Vista Business Service Pack 1 (SP1) and later versions *
• Windows 7 Professional *
•Windows 7 Enterprise.
•Windows 7 Ultimate
• Windows 7 Professional (SP1)*
•Windows 7 Enterprise (SP1)
•Windows 7 Ultimate (SP1)
*Note Virtual applications are not supported on Windows Vista Business or on Windows 7 Professional or on Windows 7 Professional(SP1). All other features of Windows Virtual PC are supported on these two guest systems.
In addition, refer to this guide to create virtual PC before using:
How to Create a New Virtual Machine in Virtual PC
http://support.microsoft.com/kb/826291
Kate Li
TechNet Community Support

ISight Camera on Windows Xp as a virtual machine in Virtual Box

I'm using Virtual Box to run Windows Xp in my MacBook Pro. I have been trying to have a video conference through Messenger but iSight is not being recognized. I've gone through the process of installing the Guest Additions and there I've selected iSight. But when windows try to install the new detected hardware, does not find any driver for iSight. Has anyone been lucky to make iSight Camera work properly under this environment? I've gone to Virtual Box forum and I haven't found any positive answer.
Message was edited by: RudyGomez

You’re absolutely right. I installed the Skype program in Mac OS X directly and not in any virtual machine. I forgot to say this. I’m using Virtual Box of Sun Microsystems as the virtualization software and not Parallels neither VMware Fusion neither BootCamp. I went to Virtual Box forums and there is not solution for the moment to make it work the iSight Camera because there is not a driver. Anyway I tried to get the driver from the installation disk that you told me but the Windows virtual machine does not catch the DVD by any means, I tried in different ways and not one worked. Besides I read that the drivers that comes with the installation DVD only works for Boot Camp. I’m not at all an expert on this.
In spite that now I can have a videoconference with my Windows’ friends and relatives, I’m still waiting for the proper solution to the iSight driver in Virtual Box.
Thanks a lot for your suggestion.

WINDOWS 8 DID NOT SUPPORT MY PALM ZIRE 72 PROGRAM. LOST ALL DATA.

My new windows 8 computer does not support my Palm Zire 72 software. I had my handheld charged, but unplugged and lost all my data since there was no backup. I have my old hard drive with most of the backup on it. Is there any way I can get this data back. It was YEARS of contacts that I lost. Thanks for your help.

vhk,
Win 8 does support Palm desktop software for Zire 72.
I have been using it for 3 months with no problems.
If you have 64bit Win 8 you need to download and install the Aceeca driver to HotSync.
http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/64-Bit-Windows7-8-8-1-USB-drivers-f...
I have my Windows UAC (User account Control) set to Never Notify.
I set the Palm Desktop/ Properties/Compatibility to Run this program as administrator
I use the same PD software (4.14e) on Vista, Win 7, and Win 8 ( I HotSync my Zire 72 on all 3 PCs weekly)
When you install the PD software skip check the internet for updates step.
If you can find your Palm desktop user folder on the old hard drive you might be able to copy it and paste it into the palmOne folder when you have Palm Desktop installed on the Win 8 PC.
User folder path for PD 4.1for XP & Vista is: Computer (C drive)/Program Files/ palmOne/User ID (same as Zire 72 last Hotsync)
User folder path for PD 4.1for Win 7 & 8 is: Computer (C drive)/Program Files (x86)/ palmOne/User ID (same as Zire 72 last Hotsync)
If you had a long user ID on the Zire 72 it will be shortened to 5 or 6 characters in the palmOne folder.
http://h30434.www3.hp.com/t5/Palm-OS-WinMo-Hardware-and-Software/How-to-copy-Palm-Desktop-data-to-a-...

CD/DVD drive it's not supported by Windows XP and Bios

I've bought a new cd/dvd drive Mat****a Panasonic.
It only work on Windows 2000, it's not supported by Windows XP and Bios, so i can't boot with.

Could you please provide some information (name) about you notebook?
Did you bought this drive or was this drive delivered with the notebook?
If the drive cannot berecognised by BIOS then in my opinion the drive supports wrong master / slave / c-sel settings.
You should know that not all drives are compatible.
The settings cannot be changed because the drive dose not supports any jumpers but only the firmware.

Windows 10 Virtual Box - Hyperthreading Not Supported on PC

Similar Messages

Maybe you are looking for