Windows 10 Wireless Connection Issue
I recently upgraded to Windows 10 because I heard it would be fantastic but after the upgrade I could not connect to a wireless router. The router in my home is working fine and connects to other computers in the house as it always has but the upgrade to Windows 10 has completely stopped my ability to connect to wireless internet with this computer. With an ethernet cable I can still use the internet but that is useless because then it basically just becomes a desktop if I always need it plugged in to do everything. My laptop is only a few months old and ran like a charm before the upgrade to Windows 10. I tried to install updates for it while it was plugged into an ethernet but it did nothing. I have searched online to see if there is an update to my laptop that will fix this but nothing has helped. This also happened to a friend who has a Toshiba Satellite. I would post to Microsoft's website since this is obviously a problem with Windows 10 but I have tried to use the Microsoft forums in the past and I always get answers that walk me in circles. The HP Forums have always given me quality answers that actually helped me so I figured I would post here and hope for the best. Thank you to anyone who can help me. Computer Specs:HP Envy 17t LaptopIntel i7-5500U Processor12GB DDR3L System Memory1TB 5400RPM Hard DriveNvidia GeForce 840M 2GB Graphics CardIntel 802.11ac WLAN and Bluetooth [2x2]
See this post close to the top of this forum board:
http://forums.xfinity.com/t5/Security-and-Anti-Virus/Norton-Popup-re-Latest-Version-for-Win-10-Compatibility/m-p/2574395#U2574395
Similar Messages
-
Windows mobile wireless connectivity issues
Hi all,
In our wireless network , windows mobiles 8.0 are not able to connect . The SSID is using WPA2/AES encryption with 802.1x auth. The remaining clients are able to connect to the network and working fine. Even from windows phone 8.1 , I am able to connect to the network. The only difference I am seeing between these two mobiles are supplicant. In WP 8.1 i am able to choose the PEAP/MSCHAPv2 with no server validation options.
In WP 8.0 , it is directly asking for UN/PWD.the WLC is 2504 with 7.2.103.0 code.
The debug is below for 8.0 mobile
isco Controller) >*apfReceiveTask: Jun 11 12:01:51.076: ec:f3:5b:13:fe:5c Deleting mobile on AP 1c:e6:c7:84:7a:20(0)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Adding mobile on LWAPP AP 1c:e6:c7:85:25:b0(0)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 0 0 0 0 0 0 0 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfMsAssoStateInc
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Idle to Associated
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c Station ec:f3:5b:13:fe:5c setting dot1x reauth timeout = 1800
*dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*osapiBsnTimer: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c 802.1x 'txWhen' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
*dot1xMsgTask: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Received Identity Response (count=3) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Reached Max EAP-Identity Request retries (3) for STA ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Sent Deauthenticate to mobile on BSSID 1c:e6:c7:85:25:b0 slot 0(caller 1x_auth_pae.c:3117)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 6) in 10 seconds
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Disconnected state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Not sending EAP-Failure for STA ec:f3:5b:13:fe:5c
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:84:7a:20
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [1c:e6:c7:85:25:b0]
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Updated location for station old AP 1c:e6:c7:85:25:b0-0, new AP 1c:e6:c7:84:7a:20-0
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:84:7a:20 vapId 3 apVapId 3for this client
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:84:7a:20 vapId 3 apVapId 3
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:84:7a:20 from Associated to Associated
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:84:7a:20 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:84:7a:20 from Associated to Associated
*dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c Station ec:f3:5b:13:fe:5c setting dot1x reauth timeout = 1800
*dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.762: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
*osapiBsnTimer: Jun 11 12:10:37.687: ec:f3:5b:13:fe:5c 802.1x 'quiteWhile' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
*dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c quiet timer completed for mobile ec:f3:5b:13:fe:5c
*dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 8)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [1c:e6:c7:84:7a:20]
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Updated location for station old AP 1c:e6:c7:84:7a:20-0, new AP 1c:e6:c7:85:25:b0-0
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_5: Jun 11 12:10:56.985: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_5: Jun 11 12:10:56.985: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*dot1xMsgTask: Jun 11 12:10:56.989: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:10:56.989: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.795: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.796: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.796: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.886: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.886: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.887: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c processSsidIE statusCode is 0 and status is 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c processSsidIE ssid_done_flag is 0 finish_flag is 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c suppRates statusCode is 0 and gotSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c extSuppRates statusCode is 0 and gotExtSuppRatesElement is 1
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_5: Jun 11 12:11:23.074: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
*apfMsConnTask_5: Jun 11 12:11:23.074: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
*dot1xMsgTask: Jun 11 12:11:23.077: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*dot1xMsgTask: Jun 11 12:11:23.078: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
*Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c apfBlacklistMobileStationEntry2 (apf_ms.c:4864) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Exclusion-list (1)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 44) in 10 seconds
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to START (0) last state 8021X_REQD (3)
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Reached FAILURE: from line 4442
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 9) in 10 seconds
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Max AAA failure for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
*Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
*osapiBsnTimer: Jun 11 12:11:42.287: ec:f3:5b:13:fe:5c 802.1x 'quiteWhile' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
*osapiBsnTimer: Jun 11 12:11:47.288: ec:f3:5b:13:fe:5c apfMsExpireCallback (apf_ms.c:589) Expiring Mobile!
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station: (callerId: 46) in 60 seconds
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c apfMsExpireMobileStation (apf_ms.c:5708) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Exclusion-list (1) to Exclusion-list (2)
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [1c:e6:c7:85:25:b0]
Kindly give your opinions on this.
BR//
VijayHi Najaf,
We have tried the same credentials only .
Level Date and Time Source Event ID Task Category
Information 5/19/2014 6:58:50 PM Microsoft-Windows-Security-Auditing 6273 Network Policy Server "Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: NULL SID
Account Name: xxxxxx
Account Domain: xxxxxxx
Fully Qualified Account Name: xxxxxxx
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 1c-e6-c7-xx-xx-xx:HM_BYOD
Calling Station Identifier: 4c-7f-62-xx-xx-xx
NAS:
NAS IPv4 Address: 10.x.x.x
NAS IPv6 Address: -
NAS Identifier: WLC
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 1
RADIUS Client:
Client Friendly Name: Wireless
Client IP Address: 10.x.x.x
Authentication Details:
Connection Request Policy Name: xxxxxxxxx
Network Policy Name: -
Authentication Provider: Windows
Authentication Server: xxxxxxxxx
Authentication Type: PEAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 16
Reason: Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
Regards,
Vijay -
Satellite U940 PSU6VA - Wireless connectivity issues
_*My specifications:*_
*Model:* Toshiba Ultrabook (Satellite U940 PSU6VA-00S002)
*Operating System:* Windows 8.1 x64 (upgraded from Windows 8 x64)
*Wireless adapter:* Intel(R) Centrino(R) Wireless-N 2200
*Wireless adapter driver version:* 15.10.0.12 (which is the latest for my device)
I have had this Ultrabook since February 2013, and throughout that period I have always had wireless connectivity issues, even after performing a factory reset. My wireless icon fluctuates between three states:
* Internet access
* Limited (in which case I cannot connect to the internet or any device on the network)
* Not connected - connections are available (and if I try to make it connect to the network, it will fail)
Sometimes my computer would instantly reach the "Internet access" state upon startup, and would remain in that state. Other times, it would be "Limited" for several minutes after starting up my computer before it finally connected, and even then the connection would drop out every now and then. At the worst, it would remain either "Limited" or "Not connected" indefinitely, no matter how many times I reset my wireless adapter or restarted my computer.
Until recently, I had always thought that these issues occurred randomly. However, I recently noticed that I always have a perfect connection whenever there are no other computers connected wirelessly to my home router, and I always experience issues of varying degrees when there is at least one other computer (or even a smartphone) connected wirelessly to the router. If there is another computer connected to the router via an Ethernet cable, this does not cause any problems; it is only wireless connections that interfere with my computer.
It is only this computer that has these problems; the other computers in my house never experience these issues, no matter how many computers are online. Also, my computer does not only experience these issues with my home router; it has the same issues on my university's wireless network.
My question is, how can I fix this? Is this a known bug, or is my wireless adapter defective? I know I can connect using an Ethernet cable where possible (I never have problems with Ethernet connections), but this is not always possible at university.> {quote:title=TomDexter wrote:}{quote}
> Intel page provides the Wlan driver for this WLan card and its v16.7.0 for Win 8.1
I just checked the page you linked to, but it recommends that laptop users obtain their drivers from their OEM rather than from Intel.
I had already checked for driver updates through both Toshiba Service Station and Device Manager (and checked both again just now). Toshiba Service Station tells me that there are no updates available, and Device Manager tells me that "the driver software for your device is up to date".
Should I update to Intel's latest driver anyway? If so, should I also install the Windows 8.1 version of "Intel PROSet/Wireless Wifi Software"?
> {quote:title=TomDexter wrote:}{quote}
> I would recommend you to check the Wlan functionality and performance testing each Wlan standard 802.11 B / G and N and additionally check the different Wlan channels (1-11)
I have found the WLAN channel setting in Device Manager and I will test it when I get the chance. But how do I change the WLAN standard?
Message was edited by: Justinian -
I am having wireless connectivity issues with my time capsule
Over the last 3 days my wireless devices have been having issues with connectivity.
Network setup:
Modem - Motorola SB5102 Cable Modem
1 TB Time Capsule 802.11n (second generation)
The devices are approximately 3 feet apart.
Wired Device:
Mac Pro (2008 build) running OSX 10.6.8, Airport Utility 5.6.1
Wireless Devices:
Playstation 3
Macbook Air
iPhone 5c
iPhone 4
I am having issues with internet connectivity. The wireless signal strength is fine as all devices can find the network. However when connected to the network accessing the internet on the Macbook Air, or either iPhone is slow and streaming services such as Netflix cannot connect. I have intermitant connectivity to the Playstation Network on the PS3.
I have wired both the Macbook Air and PS3 directly to the Time Capsule and have no issues, internet is accessible and streaming services are fine.
I have power cycled all the devices (Time Capsule, macbook, iphones, PS3, modem) to no result.
I am looking for any other suggestions that may help me with my wireless connectivity issue.A Gen2 TC is probably on its last gasp.. and it is well overdue for replacement.
If you want to get more life out of it you normally need to repair or replace the internal power supply.. This is not done by apple or any of their repair centres.
Just do ebay search and you will find sellers with replacement supplies.
Otherwise to test, do a full factory reset..
I would also downgrade the firmware.. 7.5.2 will work just as well for you and has less bugs than 7.6.x firmware.
To downgrade hold down the option key when you select firmware version.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility. -
I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.
Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
Dear Steve, will anything be done about this wireless connectivity issue?
This is no fun whatsoever....
I am telling you - browsing interenet on iMac is no fun, seriously.
I prepared a quick research for you:
http://discussions.apple.com/thread.jspa?threadID=830426
http://discussions.apple.com/thread.jspa?threadID=834613
http://discussions.apple.com/thread.jspa?threadID=831111
http://discussions.apple.com/thread.jspa?threadID=829204 (I like this one best)
http://discussions.apple.com/thread.jspa?threadID=827632
http://discussions.apple.com/thread.jspa?threadID=833593 (although marked as solved - doesn't seem to be true in my and many others' cases)
http://discussions.apple.com/thread.jspa?threadID=838501
http://discussions.apple.com/thread.jspa?threadID=822703
http://discussions.apple.com/thread.jspa?threadID=826128
People, help me in refining this list - did I leave something out?
P.S. I was thinking lately, why, after spending so much money, should I spend several days already, in agregate, trying to understand the issue and how it should be resolved? Have I not paid for not having such problems?Here is a lot more:
http://www.macintouch.com/readerreports/wirelessnetworking/topic4035.html
Highly interesting is the post of J.Exby which i reproduce here:
For months I've not been alone in holding to the notion that the airport client software on Mac OS X 10.4.x has been problematic and unstable in certain (noisy, crowded, channel overlapped) wireless environments. Issues littered around the Internet Mac forums include problems of networks appearing, then disappearing. This is a difficult problem to pin down, given the difficulty of reproducing the conditions that might cause wireless network dropouts.
A major symptom of the problem was seeing the constant messages of:
"An error occurred joining the AirPort network" (Try Again) (Cancel)
when attempting to connect to a wireless network, despite that network being seen, having correct security settings, etc.
Various temporary fixes/ideas floated around the mac community have included:
- reseting pram, nvram and PMU
- installing 10.4 from scratch, instead of 10.3 to 10.4 upgrade process
- Repairing permissions, run Combo updaters, etc
- putting system to sleep or reboot for temporary connection fix
- applying AirPort 2005-001 patch (or not)
- upgrading (or downgrading!) AirPort basestation firmware
- changing AirPort channels
- enabled (or disabling) Interference Robustness
- disabling Bluetooth and BT peripherals
- removing WEP/WPA passwords out of Keychain
- running Keychain First Aid on user/login keychains
- buying new AirPort extreme cards
- replacing AirPort base stations with other vendor hardware, etc.
With the stability of our Windows XP clients now (after driver updates) and the change from Apple base stations to Belkin Wireless Pre-N Router having no appreciable benefit for our Mac notebooks, the OS X AirPort client software suspicions only grew.
During troubleshooting I always have
Applications--->Utilities--->Console
and
iStumbler (96)
running, and I watch output as wireless scans are performed.
From the Terminal I also run:
/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport -s
and usually see constant
AirPortScanner WirelessScan error -2013261821 airpInternalErr
messages.
After two days of testing (and fixing?) I am even more convinced there are bugs in the powerpc 10.4.x AirPort Extreme Framework!
This is what I found:
Environment at our office:
- wireless Network A (802.11g channel 1, WPA personal)
- wireless Network B (802.11b channel 6, WEP 40bit ascii)
- wireless Network C (802.11g channel 11, WPA personal)
(WAR-marching around our office exterior shows at least 12 outside wireless networks found at various signal strengths!)
Test systems used:
- iBook G4 (10.3.x and 10.4.5)
- Powerbook G4 (10.4.5)
- Intel iMac (10.4.5)
Primary symptom on iBook: networks not displaying long enough under the AirPort icon/menu (or Internet Connect) to connect to ANY network reliably! Perhaps connect to Network A intermittently, never even see Network C.
iStumbler showing some networks respond to poll, then immediately stagnate/disappear.
Primary symptom on Powerbook: stable connections to Network C most times, difficulty "switching" to Network B or A once moving closer to source. Usually stable "seeing" networks via AirPort menu icon, but still have occasional dropouts (due to fluctuating signal strength or interference?).
Primary symptom on Intel iMac: NO PROBLEMS! Can connect to (and steadily "see") all valid Networks A, B, C !
iStumbler constantly polls all available networks, with no dropouts.
Steps taken:
1. Wipe iBook hard drive, install 10.3 from dvd. AirPort signals unreliable.
1a. Perform all 10.3.x Software updates, Repair Permissions, reboot. AirPort still unreliable.
2. Reset PRAM, nvram, PMU. no improvements.
3. Reseat AirPort Extreme card, ensure antenna is firmly plugged in. AirPort still unreliable.
4. Wipe iBook, install 10.4.3 "fresh" from Full retail version DVD. AirPort still unreliable.
4a. Perform all 10.4.5 Software (combo) updates, Repair Permissions, reboot. AirPort still unreliable.
5. Hold down the Option key, and click on the AirPort icon in the menu bar.
select About AirPort...
pay particular attention to each system showing:
iBook: AirPort Framework 421.13.0
powerbook: AirPort Framework 421.13.0
intel iMac: AirPort Framework 426.1.0
Aha! A big difference with the AirPort Framework component version on the Intel iMac!
6. So, using the Terminal let's get this newer Apple80211.framework onto the iBook.
First on the intel iMac:
cd /System/Library/PrivateFrameworks
sudo tar cf ~/intelApple80211frame.tar Apple80211.framework
Copy this intelApple80211frame.tar file onto a USB thumb drive, CDR, iPod, scp, etc. to copy it onto the iBook (home directory).
7. With the tar file copied into the home area on the iBook, turn off iBook's AirPort via the menubar icon.
Now launch Terminal and:
mkdir backup-framework
cd /System/Library/PrivateFrameworks
sudo mv Apple80211.framework ~/backup-framework/
sudo tar xvpf ~/intelApple80211frame.tar
Launch Disk Utility, Repair Permissions on boot drive.
Reboot iBook.
8. Turn Airport on via the menubar icon.
iBook now has HUGE improvements in wireless connectivity! It can "see" all Networks A, B, C reliably and can connect to any of them when in range (having enough signal strength). Switching between networks is successful 90% of the time. Occasional message of:
"An error occurred joining the AirPort network (Try Again) (Cancel)"
usually works after clicking (Try Again), whereas before Try Again almost always failed.
I am unsure how this newer Apple80211.framework will affect future Software Updates on the iBook, but frankly I could care less now that it's able to access all of our wireless networks!
I am unsure if this is the magic-bullet solution for a majority of people, but I'm stunned that Apple appears to be providing new and improved Apple80211.framework software with the intel iMacs, but many of us have been fighting AirPort problems on PowerPC platforms for months!
Come on Apple, OS X 10.4.5 should contain the SAME software component versions for ALL CPU platforms!
Source: http://www.macintouch.com/readerreports/wirelessnetworking/topic4035.html -
Wireless Connectivity issue (WRT54G)
Ok.... I'll try and explain the problem as best I can.
My family has been using a WRT54G to network the house computers (1 or 2 desktops running via ethernet and 3 laptops running via wireless) for years, and it's always worked perfectly, up until January... Coincidentally? the inability for some computers to connect via wireless coincided with the installation of Windows 7 Beta on one of the laptops. Since then, We have only very rarely been able to have all three laptops connected to the wireless at the same time (computers connected via ethernet have always worked, and the laptops work fine when connected via ethernet). Usually unplugging and letting the router reset itself works fine to get at least two of the computers running (the other not even being able to see the network).
The router is running these settings (just reply and I can get anything else you need)
Firmware Version: v1.02.2, Capture(month.num6) Jun. 7, 2007 Wireless Channel- 6- 2.437GHz
Wireless SSID Broadcast- enable
Status- SES inactive
Wireless network mode- Mixed
Also, for some reason, The network no longer has the correct name, and it is unsecured.... any reasons why? this is driving us nuts.
Thanks,
VolundI'm surprised noone has responded yet. I'm having the same issue and based on searches I've done, this is a frequent problem with this router when a Windows 7 computer connects to it. In my case I have a notebook that dual boots XP and 7. XP works fine and has been working for a long time. As soon as I boot to 7, all connections on the router drop. Very annoying. Hopefully someone has the answer.
-
Hello, I am having internet wifi connection issues with my laptop computer.In the bottom right corner of my taskbar, it says "Network Internet Access"However, I am not getting connection through any of my browsers.I am able to get wifi connection through my Nintento Wii U, but not my laptop. When I turn wifi button on keyboard off and then back on quickly, I only get connection for a single second; then no connection at all. I have tried the following:1.) Tried to connect to friend's wifi, but could not connect to the network 2.) Ran troubleshooting for wifi and it said two errors: broken access point and plug or wireless not plugged in properly 3.) Ran Wireless Network Troubleshooting for when I tried to connect to my wireless router and results are: couldn't identify the problem..(network connected internet access, but no connection to any browser) 4.) Checking the status of wireless driver and results are this device is working properly 5.) Uninstalling and reinstalling Intel Wireless driver through device manager 6.) Unchecking box that says turn this wireless driver off to save power 7.) Checked Windows Firewall to see what boxes are checked and unchecked...not sure what to look for 8.) Disabled and Inabled wireless network driver I noticed that there is a slight rattling noise coming from inside my laptop not sure what came lose or what has become broken from the inside; I never droped it, but I did hit it slightly once or twice against wall while the laptop was in laptop case strapped to my right shoulder... Is it possible that I may have a broken wireless card that is inside my laptop?I ask this because this is very much my concern.
Welcome to the forums. You're talking to other customers here.
What model DSL Modem / Router do you have? Have you tried loging into it to adjust the WiFi Settings? Do you devices see your WiFi network?
Is it possible a neighbor has installed a WiFi network that is interfering with your network?
Know that we peers here only know what you tell us. The more information you share about your problem, the more likely someone here will be able to help you.
Good Luck.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. -
Thinkpad Edge E15 302-45U Wireless Connection Issue
I had to do a fresh install of windows 7 professional. Everything is working aside from the wireless connection. I've downloaded each wireless driver and still the issue persists. I can see the connection being broadcasted, upon entering the password to connect I only get "windows was unable to connect to xxx".
I can connect to this wireless point from my phone and my other laptop plus no one else in the office is having this issue. Only on this Thinkpad am I having the problem.
If I try to use the Intel PROSet/Wireless Tools diagnostics I get a FAILED-Wireless Hardware is not bound to transport driver. I've tried everything at this point with no luck. The LAN works fine of course but I need the Wireless to work.
Thanks
Solved!
Go to Solution.Nothing?
-
BT Infinity - Wireless Connection Issues
I have had this product for over a year now, and I have to say it is amazing that I have lasted thislong without throwing the router out of the nearest window!!
Does anyone else experience such poor wireless connections??? i.e. up and down, up and down, up and down, all day long, any time of day, any day of the week. It is shockingly bad!!!
I've changed channels, I've paid for an engineer to check the connection point, even though it's exactly the same one, and in the same position that the engineer installed it.
I'm really at the end of my tether!
Anyone, care to offer any advice?
We are a family of 6, with many many gadgets, i.e. iPads, iphones, Xboxes, laptops, ipods, etc. are we being penalised for having too many wireless devices? Can the BT Infinity product only cope with a certain amount of wireless devices?
PLEASE HELP!!!If you have tried all the wireless checks/changes ie moved the HH3 off Automatic onto a clear channel.
Inssider is a good free wireless scanner for windows, that can help identify a clear channel to move the HH3 to.
Inssider video HERE.
Then you may want to consider another route. I note in Ady wrote in msg #21 and 25 HERE.
"My Netgear WNDR3700 got delivered today................
WOW! - what a router!!!!
My laptop now connects at 150Mbps and stays like it, Xbox 360 and Apple TV 2 all work flawlessly on the Wireless Network.
What can I say - anyone having issues with the Home Hub 3, get this router, you will not be disappointed!!!"
And more choice HERE.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR) -
Ethernet/wireless connectivity issues with Airport Express
I am having problems with my PC seeing my newly aquired AE and was hoping someone can help, none of the topics already discussed seem to be exaclty the same as my issue.
Scenario:
* iTunes on the PC does not detect the AE so I cannot play my iTunes setup through my stereo.
* The PC can ping the AE.
* The PC can configure the AE if I open the AirPort utility and go to File, Configure Other and enter teh units details.
* Both laptops can connect to the AE via iTunes and the AE Utility also picks up the device.
Equipment
* I have an Open Networks 625W 4 port ADSL router with wireless included in the unit.
* My PC is connected to my LAN via ethernet and is running Windows Vista fully service packed.
* I have two laptops both connected via wireless on my LAN and all devices (ethernet and wireless) can see each other.
* I have an AE with latest firmware and the latest version of the Airport Utility running.
* The bonjour service is running on the PC.
* I have tried turning the PC's F/W off with no change.
* I have tried connecting one of the laptops to my network via ethernet and had the same issues as the PC.
Configuration:
I have tried many different methods of configuration but the one that has me working this far is-
* Joined to a wireless network.
* Using DHCP (and getting IP addresses fine off the third party router)
* Connection sharing is off by default so its working in bridged mode.
Its almost as if the router is not allowing those packets related to Airtunes to pass through from/to the wireless router(and I have tried so many different settigns there). I believe Bonjour is required and Im not sure if any routers have issues with bonjour but I believe its encapsulated within IP packets (not sure on that though). Or Maybe some routers don't work in this scenario and I need to update to a Belkin Wireless G or N or other. Or maybe the software will only accept direct wireless connections if its configured for wireless - I have no idea and am losing hair fast.
Please, any help would be appreciated.I finally cracked it!
I have enabled dynamic routing with RIP v2 (v1 works too), enabled multicast with IGMP proxy and used a bridge filter allowing all traffic between the LAN and the wireless networks. All three settings are required with my router. If I drop any of them AE from LAN to wireless will not work. -
HP Officejet Pro 8100 Wireless Connectivity Issue
Hi, I've just purchased the HP Officejet Pro 8100 and have not been able to connect via wireless to the home network. I've tried connecting to 3 different routers and no success. Steps I took were as follows.
Steps:
1. Insert Driver CD
2. Install HP Driver Software
3. Follow on screen prompt for wireless connectivity
4. Was prompted to connect USB cord temporarily
5. Prompted to select SSID
6. Prompted to enter WPA Security Key
7. Screen saying your printer failed to join the following Wireless network.
8. Humored myself and read all the troubleshoots. No good.
9. Downloaded and Flashed new firmware to Printer. New Firmware installed. Still did not help.
*One thing to note: On the Failure to connect to Wireless network Error on Step #7 it says something about MAC address filtering and to enable the above MAC address. The funny thing is there is no MAC address supplied above. The field is blank. All that aside, MAC address is disabled in the first place anyway. Just wondering why the printer software doesn't know the printers own MAC address.
Attempted to setup printer on the following routers...
Router #1
Router: e4200
Local IP: 10.0.0.1
Subnet: 255.255.255.0
DHCP Range: 10.0.0.10 to 10.0.0.59
SSID: "Kosmos 2.4" and "Kosmos 5.0" 2.4ghz and 5ghz bands respectively
Channel Width: 20mhz or 40mhz
Wirless Mode: a/b/g/n
Security Mode: WPA or WPA2 Mixed Mode
Router #2
Router: EA4500
Similiar Setup as Router #1
Router #3
Router: 2wire 3801HGV
Local IP: 192.168.1.254
Subnet: 255.255.255.0
DHCP Range: 192.168.1.64 to 192.168.1.253
SSID: "u2" *Eliminated Spaces in SSID
Wirless Mode: b/g
Security Mode: WPA2
If anyone could shed some light that would be great. Otherwise I guess ill be returning it very soon.Now you know why you were unable to connect.
Absolutely. It should be broadcasting its own SSID.
This link goes to a factory reset document for your printer.
is your printer still in warranty?
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
HP Officejet Pro 8500 a910 wireless connectivity issues?
I have a HP Officejet Pro 8500 a910 and It was working fine. I got a new router and it was still working fine. Second night of having everything set up it stops working and shows as offline on my computer. It will print information about the printer from thecomputor but will not print out any other documents.
I'm having the same issues. In my case, first I updated my MacBook Pro to OS X 10 Mavericks. A few days ago, the Actiontec gateway router provided by my ISP Frontier Communications ceased to function. Frontier sent a Netgear 7550 gateway router to replace it. I installed it according to directions. My email capability and home network went down. Frontier helped to restore the email but the techs I worked with couldn't figure out what to do to restore my wireless network. The router's setup would not allow me to replace the WPA Shared Key with the wireless network password I used previously. So, I updated the ASUS range extender and all the wireless devices that were on my home network with the new WPA key. Both printers, the Officejet Pro 8500A 910 and a Brother wireless laser, will not network. The Officejet blue wireless icon no longer lights up. I uninstalled the Officejet's software and then downloaded and installed the latest software and drivers for the Officejet Pro 8500A 910. The HP Network Configuration printout indicates that its network status is ready and the active connection type is wireless. I had it connected to my Mac with a USB cable so I could reinstall the software and drivers. When I disconnected the cable, I lost connection to the Officejet and couldn't print. the HP utility could not establish a wireless connection even though I did input all the new router settings. The Officejet thinks it's wireless but it isn't. I can only conclude that my Officjet is delusional. It's not all that old, but could it be ready for the all-in-one graveyard?
-
HP Officejet 6600 e-All-in-One Wireless connection issue.
We are using the HP 6600 now for 6 months and sice a few weeks we have some issues with the printer.
situation:
1 - HP 6600 printer
1 - Wireless Router
3 - Computers connected to the router
What we did:
Updated the firmware
Manual IP
Put channel from router to 11
Put it closer to the router (1 meter instead of 3)
HP docter, everything is fine (if connection is lost, answer "No network connection to your device"
But all above is not the solution.
When the printer is offline we just switch it off and on and it will work again for a couple of hours. It looks that the connection is lost when it is going to sleep/hybernate.
Also one of my customers has exactly the same problem, also did all above and didnt fix anything. This question is for me quite urgent because i am going on holidays in 2 days, my father in LAW cannot work without the printer and is getting upset this all this.
Any advices?Arjan_NL
If I understand you correctly the printers blue light is flashing and you cannot see your printer on the network. I recommend that you reset the network defaults to factory settings on the printer.
To reset the network defaults
-touch Setup Menu
-touch Network
-touch Restore Network Defaults
Then use the Wireless Setup Wizard to connect the printer to the network.
To run wireless setup
-touch Setup
-touch Network
-touch Wireless Setup Wizard
follow the on screen instructions to set the printer up on the network. You will need the WPA password or security key for the router to do this.
Follow the steps in this document Printer Does Not Maintain Wireless Connection to set a static IP address for the printer. This should help you maintain a better wireless connection.
Keep me posted and let me know if you need further assistance.
I worked on behalf of HP. -
PRINTER WIRELESS CONNECTION ISSUE
PRINTER 3050A All IN ONE Printer Scanner Fax
prints well with USB Connection BUT doesn't print on ePrint or Wireless, THOUGH the lights indicate there is positive connection. Error MSG: "Printer is Offline" but HP Printer screen indicates Online as do all ligths on printer. I've used the Router WSB reset and have completely shut the printer down, unplugged it and resumed in more than an hour. No change.Hi @LITTLEBOYBLUE,
Welcome to the HP Support Forums! I see you are not able to print wirelessly to your HP Deskjet 3050A, when you attempt to print wirelessly, you get a 'Printer Offline' error message. You have 2 options when setting up your DJ 3050A to your network, you can use the HP's Auto Wireless Connect or do a USB to Wireless conversion. To get started click on the link below:
Setting Up the Printer for a Wireless Network for the HP Deskjet 3050A and 3070A e-All-in-One Printe...
Please let me know if you were able to connect your HP DJ 3050A to your Wireless network successfully.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!
Maybe you are looking for
-
I just want to know how I can have all my photos back on my phone
-
Suitcase Fusion 5 making Adobe CC apps slow?
Hi. New Macbook Pro Retina. Just moved back to Suitcase Fusion 5, after really liking Fontcase for several years. It seems the Extensis plugins are really decreasing the startup time for Photoshop, etc. I don't even have any fonts loaded or activeted
-
Incompatible mode issue with 50" Vizio
I hope this is the right place for this question. OK, I've been doing this stuff so long that when I encounter problems like this I worry I'm just missing the obvious. I have been running my older Intel Mini (1.66 core duo) to my 50" Vizio plasma, vi
-
How to prevent Microsoft word from switching which desktop I am on?
I have a 2011 Macbook Pro, OSX Version 10.9.2 as well as microsoft word for mac 2011 (the most recent update). I have had an issue for a number of years where when I have microsoft word open in one desktop and am using another application in another
-
I have just had delivered a new iPhone from Apple. My existing iPhone 4 (on O2) has been fully backed up onto iTunes on my iMac. Is there a easy to follow tutorial on making the transition from my old to new iPhone, including when to put in my O2 sim