Windows 10 wont update

http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/windows-10-technical-preview-wont-update/fa2f288f-e43d-4073-ab4a-f1e71aa8419a
Please help me

Hi,
According to your description in the link above, seems you're using native boot VHD, I'm afraid that to say that Windows upgrades are not supported in native boot VHD, and you must perform a clean installation on a new VHD.
Reference link (pleaes see the "Note")
Deploy Windows on a VHD (Native Boot)
https://technet.microsoft.com/en-in/library/hh824872.aspx?f=255&MSPPError=-2147217396
We also recommend you test Windows Technical Preview using a virtual machine or Hyper-v for easier management.
Thanks for your understanding and support.
Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Windows wont update giving error

i am running windows 7 every time i try to check for updates i get "WindowsUpdate_80244010" "WindowsUpdate_dt000" message

Check this : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windowsupdate80073701-windowsupdatedt000/fd4dc146-f362-e011-8dfc-68b599b31bf5
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

10.3.1 for window wont update

it just shows error sometimes i get no E drive. i am going bananas? please help

so sorry.... it says error while downloading occur if problem percist do it manually and then i do it manually, still doesnt work it says no e drive, i tryied from website still no go.

HP Printer Control App installed on my pc windows 8 but wont update in windows store

Ii have downloaded the hp printer control app on my desktop pc which is windows 8, it shows my printer which is the HP Photosmart B110a its product number is CN245B. It keeps saying in my windows store app that it needs to be updated as other apps do but it just says pending constantly and theres no change ive used the app to get software for printer such as certain wizards and such. but it wont update ive got a hp printer control app on my ipod touch too and this also has no trouble picking up the printer and works fine, is it because ive got windows 8? please can someone help as its not right for it just to be there stuck not updating, thanks
lollykaye2005

A bit of a shot in the dark, but this appears to be an issue with pulling down the update from the Windows Store. I have not run into this issue directly, but this thread has a lot of information.
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_store/windows-8-apps-are-pending-...
The one tidbit that might help here from that thread is:
"finally I found a solution. go to troubleshooting (press win+w >then type troubleshooting). now a window opens in desktop. click "fix problems with windows updates". now click next. windows will search for solutions, but it wont find anything. then windows will ask if u want to try in administrator mode. click yes. windows will find and solve the problem. that's it."
I work for HP.

Itunes wont update on windows 7, ipod wont read on itunes

Hi, itunes wont update on windows7, and after unsuccesfull updates (several) now my ipod wont read on itunes, it does show up on windows as a driver, have researched this a lot ,getting weary now..have deleted affliliated apple files etc , reinstalled , have several issue messages, one warning was , please download manually , go to tools and download? how do i do this? cant find a toolbar for this download? please help.
had to upload this version of itunes 10.3.1.55, but it doesnt recognise my new ipod touch , is there a version except for the latest itunes that will read my ipod touch 4.3.5?

Did you check your security software settings? iTunes for Windows: Troubleshooting security software issues
Here's some more : Trouble installing iTunes or QuickTime for Windows

IPod nano wont update because it says its windows based

My iPod wont update because it says that it is Windows based. I have never used it on a Windows machine.
How do i change it to mac based.

In the restore instructions it says that you need to plug the iPod into a power adaptor during the second stage.
Not really.
Actually it says,
"iTunes will present one of two messages on screen with instructions specific to the iPod model you are restoring.
* Restore Instruction 1: Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
* Restore Instruction 2: Leave iPod connected to computer to complete restore (typically applies newer iPod models)."
You will get Restore Instruction 2.

Windows 7 home premium wont update

We had windows vista removed from our laptop and replaced with windows 7 home premium, this was done at our local computer shop. I now realise that a month later it has never updated and no matter what i do it still wont update. it comes up with
error message 80070246. Any ideas. Many thanks

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

My ipod is formated for windows xp. new laptop is windows 8. ipod wont update on new laptop, what do i do now?

my new laptop is windows 8. iPod is formatted for windows xp. new laptop knows iPod is there but wont update. how do I fix this?

hey there oddball35,
It sounds like you are trying to update your iPod with your new computer. Without knowing the specific symptoms, I recommend you start with choosing the iPod model you have from the following website:
iPod Troubleshooting Assistants
https://www.apple.com/support/ipod/five_rs/
If that does not resolve the issue, are you getting any error messages, or what specifically is preventing the restore from happening?
Thank you for using Apple Support Communities.
All the best,
Sterling

I updated my iphone to iOS 5.1.1 after i updated it, it went into a 30 seconds boot loop, so i tried a hard restore and now windows wont recognize my iphone 4, ANY SUGGESTIONS?

i updated my iphone to iOS 5.1.1 after i updated it, it went into a 30 seconds boot loop, so i tried a hard restore and now windows wont recognize my iphone 4, ANY SUGGESTIONS?

Place the device in DFU mode (google it) and restore.

Update xp to sp3 then windows wont boot

I installed Xp sp2 it worked just fine so I downloaded sp3 no when I boot I get to the windows screen (the one with the blue bar on the bottom) and won't go any further
anyone else have this problem
Any Ideas

Hi Kev
You were luckier than me - maybe - you managed to install the download but at least my Boot Camp is still working.
How did you manage to install it?
Each time I tried to install SP3 it told me there was not enough space and I needed to free up 4.4MB of disk space - even though I have 20GB of free space on the drive.
Now I have given up and switched off Windows Automatic Updates.
I figure someday soon, Apple will give us an upgrade download to Mac OS X 10.5.4 that will allow the successful installation of Windows SP3 within Boot Camp. Until then we keep soldiering on.
Must say I'm a bit disappointed with Apple that they expect their customers to solve their own problems.
For what it's worth, trying to upgrade SP1 to SP2 also required 4.4MB more free space. It required the SP2 disk to install. Maybe this is the same.
I also have a Windows XP PC laptop that is upgraded by downloads to SP3 so I won't be buying the program disk for Boot Camp.
Best regards
Charley

IPod Nano wont update songs!!!

Okay, when I plug my ipod nano into the USB port and my itunes pop up, the stage where my ipod would usually update itself is replaced with a popup window that says: Songs on "iPod Nano" cannot be updated because of all the playlists selected for updating no longer exist.
Yes, I have no playlists right now, for some reason in the past I deleted them all. But this problem has erased all the songs and things I have on my ipod and since it wont update my songs I cant seem to put them back in (this includes the burned ones and ones bought from the music store). I am totally confused on what to do, someone PLEASE help!!

Okay, when I plug my ipod nano into the USB port and
my itunes pop up, the stage where my ipod would
usually update itself is replaced with a popup window
that says: Songs on "iPod Nano" cannot be updated
because of all the playlists selected for updating no
longer exist.
I am experiencing, for the first time, a VERY similar issue; except I have MANY playlists, and, up until now, I have been able to selectively manage them on my iPod (2Gb iPod, 60Gb of music). Now, all of a sudden, I get the error that is quoted above, although I have already restored iPod twice, reinstalled iTunes once, as well as selected manual sync, and they all "crap-out" about 1/3 of the way thru the synch-job. Never before have I had any similar problems with my product. Please help.
Frankenstein (Home-Grown) Windows XP Pro Mixed Components - PLENTY of Muscle and Space

IPod Nano wont updat songs!!!

Okay, when I plug my ipod nano into the USB port and my itunes pop up, the stage where my ipod would usually update itself is replaced with a popup window that says: Songs on "iPod Nano" cannot be updated because of all the playlists selected for updating no longer exist.
Yes, I have no playlists right now, for some reason in the past I deleted them all. But this problem has erased all the songs and things I have on my ipod and since it wont update my songs I cant seem to put them back in (this includes the burned ones and ones bought from the music store). I am totally confused on what to do, someone PLEASE help!!

And I have no songs in my iPod but it says that I'm using 416 KB and still have 892.1 MB free storage left!!

Windows Automatic Update Error 80072EFD - After new HD installation by Toshiba

Hi,
The hard drive went in my computer and I got it repaired at Toshiba Service centre. Four weeks later and it wont update windows which now causes web site security certificate errors with itunes, banks and paying for items on the web. I have called Toshiba and told them when I got it back it doesn't work correctly and they say its not there problem! Windows worked fine before the hard drive re-install.
I have tried nearly every suggestion on windows forums out there and tried to install the windows fix it tool but it wont let me on my laptop. I have also tried installing the Intel driver that people recommend but that also doesn't work. I have malware scanned the system as suggested by Microsoft it still wont work.
I keep getting windows error code 80072ED. The only thing i havent done which was suggested by toshiba was do a re-install by holding 0 key when rebooting the computer but I dont want to lose my hard drive and wipe it all. Im using windows 7 home premium. Somebody please help.
Thanks
Attachments:
Capture.JPG ‏28 KB

Satellite C660-195 (PSC0LE-02300JEN)
the old hard drive was removed and a new hard drive installed and the computer re configured to out of the box state. I dont think the windows update has worked since I got it back from Toshiba.
If it's just back from the Toshiba shop and doesn't work right before making changes, you should return it.
That error code indicates a network configuration problem. Do you have other problems on the internet?\
Do you have more than one anti-virus program resident in memory?
-Jerry

Another Itunes wont update discussion

Running Windows Vista ( i believe service pack 2 ) and itunes says that it cant use my phone because it is out of date. i attempt to update and it wont update. it will say that the software is up to date. itunes will continually freeze and crash and its getting quite frustrating because i cant pull my photos from my phone so i can make room for the latest software update for my phone

lisalowe wrote:
itunes wont update ...
As you have supplied zero details...
Start by looking here > http://www.apple.com/support/itunes/install/
If your issue is not covered here... Post back with more details.

Ipod wont update, restore, WORK!!??

hi everyone, my ipod's been playing up, its the second time this has happened, the last time i managed to sort out the problem but it was an accident! It started off by suddenly deleting all the songs in my ipod, they're still in my library but wont update onto my ipod, saying there is not enough memory. I have tried resetting, and then update/restoring but I keep getting a range of different error messages from "Internal error" to "formatting failure" i have searched through all the discussions on here but none have helped!! the ipod updater i downloaded seems to disappear on my computer leaving one from jan06, which is obviously out of date. PLEASE HELP!!!!
thanks xxx

You've seen this?
Internal manager error.
If after trying all else, you could try a format of the iPod in Windows. A full format does a check and remap of bad sectors on the iPod hard drive, and you would need to restore the iPod as normal (using the iPod updater) afterward. This can also work when the iPod is recognized by the computer, but not by the updater.
First, put the iPod into forced disk mode.
See: How to put the iPod into disk mode.
On your PC, go "my computer" and right click on the iPod, then choose "format". Ensure the settings are at "default" and that "quick format" is not checked. Now select "format". It will take a while, but when that's finished, restore the iPod using the updater.
If you need to, reset the iPod to exit disk mode.

Windows 10 wont update

Similar Messages

Maybe you are looking for