Windows 126 error 7
I am not sure which discussion I saw the solution to the itunes error message Windows 126 Error - but they suggested removing ALL Apple items from PC, which I did, then installed Itunes...it worked. I had spent a couple of hours before trying all sorts of things.
Hello grandmom.026,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
1. Remove iTunes and related components from the Control Panel
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components, may have unintended affects.If you encounter an error while uninstalling, try repairing the affected component:
2. Verify iTunes and related components are completely uninstalledIn most cases, removing iTunes and its related components from the Control Panel will remove all supporting files belonging to those programs. To fully resolve these issues, manually remove any remaining iTunes-related folders listed below.On 32-bit and 64-bit systems:On 64-bit systems:
3. Reboot your computer.
4. Download the iTunes installer. When prompted to select what you want to do, choose to save it to your computer.
5. Install iTunes.
Right click on iTunesSetup or iTunes64Setup.
Windows Vista, Windows 7, and Windows 8: Select the 'Run as administrator' option.
Windows XP: Select the Open option.
Finish installing iTunes.
It is important to uninstall iTunes and the related components in the order listed in the first step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.
Similar Messages
-
Windows 126 error when downloading latest update!
Please help cannot install latest version of itunes 'MSVCR80.dll is missing'!
Hello Gimpy1248,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario -
i cant open my Itunes application through my PC, everytime i try to open it an error called error 7 pupmed out, or windows 126 error, and in other note they said i cant start itune.exe becouse MSVCR80.dll is missing from your computer ...
what can i do ?
please helpSolving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I was unable to open iTunes and got a message error 7 (windows 126) so I tried to uninstall and download latest itunes 10. When I tried to remove old version of itunes I got the message... The feature you are trying to remove is on a network resource that is unavailable and when I try to download iTunes 10 the message reads.... The installation source for this product is not aailable. Verify that the source exists and that you can access it. Can anyone help?
A msi file is short for microsoft installer. It normally is for installation, removal, and maintenance for a program. So iTunes.msi would be used for the updating of the program. For some reason it isnt finding this so we can't update, install, or remove it.
From what I have seen windows installer cleanup utility solved related problems before.
I found this forum about removing and installing a new iTunes. It was about someone who was trying to isntall iTunes, and was looking for msi file and asked for help. Using this should allow you to be able to install iTunes. It won't give you the msi file but will allow you to isntall iTunes over again.
This was what was said.
Another option in case you can't get an msi. (Or even if you can ... the msi's mentioned in the messages may be damaged rather than missing.)
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Restart the PC, and try another iTunes install. Does it go through properly this time? -
I can't open itunes. It says error 7 (windows 126). How do I fix this?
How do I fix error 7 (windows 126)? I cant even open itunes.
Hello jenmneedshelp,
The following article provides steps that can help get iTunes working again.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
I am running Windows 7 64 bit.
This HORROR began because I realized that my phone had suddenly lost all of the music except music that had been purchased. It also lost all purchased iBooks as well as audible books downloaded from audible and ringtones that I had purchased from iTunes.
I then thought that it would be fine once I connected to itunes on my computer. I connected to itunes and it said that there was an update available so I downloaded and installed 10.7.
I tried to run the program and got Error 7 (Windows error 5) message.
I then found several discussion questions that seemed similar to mine and I think that I tried them all. Removed everything apple and reinstalled iTunes. I followed the instructions and removed everything in the order that was listed, some I had to change security to own the file before I could delete them. I did all of the steps, (maybe I deleted too many apples items ??) emptied the recycling bin, restarted and reinstalled. I also tried the Net framework fix, used the ms fixit (the one with the picture of the man on it) and I think a few other things that I have found on this site as well as MS site. I restarted my computer every time.
The latest thing that I tried was to download 10.63 since I don't care about the new stuff. After all of this I sometimes get and message saying that I am missing AVFoundationCF.dll file and once it said something about Itunes Helper (when these two messages appear, it is separate from the error messages which occur after clicking ok on them) before getting the Error 7 (windows error 5) or else Error 7 (Windows error 126).
PLEASE HELP!Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
http://www.reimageplus.com/fix-windows-127-error/ (Many thanks to reimageplus.com)
You will also need to check and verify that the following folders have been removed:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iTunes
C:\Program Files\iPod
C:\Program Files\QuickTime
C:\Windows\System32\QuickTime
C:\Windows\System32\QuickTimeVR
dont forget to remove icloud also
you dont need to delete your itune music library though
If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)
do this for files under program files and program file (x86) on your computer
once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program.
Important:- instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues)
i then installed itunes and it all worked fine,
should take no longer than half hour to fix
hope this helps -
Please can anyone help? tried to update my itunes and now can not access at all and now have error message cant access as file MSVCR80.dll is missing from computer and then a further message error 7 (windows 126) . laptop and i tunes working perfectly before the update. I have tried unstalling the itunes programme and re installing but still the same error message .
both my i pads and i pods are still ok its just the i tunes.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Windows 7 126 error after itunes install, why?
ITunes runs well, however I get a windows 7 126 error. I don't know how to repair it. I've unintalled all the Apple files and reinstalled several times to no avail. please help and thanks in advance!
I found my solution. As some suggested here, I looked and found an older iTunes x86 file that needed to be deleted. Once done, my current iTunes works fine and no longer trips the windows 7 126 error alert.
-
hi everyone.. I have windows 7 (32 bit operating system), and have tried installing the latest version of Itunes, but my PC keeps saying windows 7 error (126) ? I have no idea on how to fix this??
Please could someone help???
And it also mentions mediatoolbox dll. is missing?? haha i have no idea what that means??? please help...
Thanks alot! I really appreciate your help..Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I would like help on getting my ITUNES back operating. I can't get on my account because every time I click on ITUNES I get these messages. "MSVCR80.dll" and then "error 7 (Windows 126)". Please help! I really need to get into my account.
Check out this page: Troubleshooting issues with iTunes for Windows updates
-
help what do i do
my i tunes wont open on either my laptop or my home computer laptop says error 7 windows 1114 computer says error 7 windows 126 what do i do?Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/APSDaemon.dll/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Have read so many discussions about how to fix Error 7 Windows 126, but none seem to give a real answer. I have uninstalled all Apple programs from my computer. I have scanned for viruses and cleaned out everthing....The install of 10.6 is fine until right at the end when the following message comes up AV Foundation CF.dll then Error 7 Windows 126.
I need someone to help me - Itunes was working fine until I wanted to upgrade - now I cant plug my ipod into my lap topdownloaded winrar and extracted that bfile, haha answered my own question,
-
Seit dem letzten update kann ich itunes nicht mehr starten. Fehlermeldung: nicht gefunden MSVCR80.dll und error 7 (Windows 126)
See TS5376(DE): iTunes 11.1.4 für Windows: Installieren oder Öffnen nicht möglich.
tt2 -
On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99442) -
How do I resolve error 7 windows 126
How do I resolve error 7 windows 126 when trying toopen ITunes...I have uninstalled in the correct order and downloaded 5 times...to no avail.
JeffFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Is there a replacement for CS6 coming out soon and what will it be called
Is there a replacement coming out for CS 6 and what will it be called
-
Connection E62 to internet via Bluetooth
Since I was dumb enough to get the non-WLAN version of this phone, I was hoping to use the Bluetooth connection with my laptop to access the Internet or company LAN. I have setup the Bluetooth device as COM 9 port but I am unable to assign that port
-
Friends, We are load testing our system. Environment is Weblogic 4.5.1 SP 9. We have 800MB allocated to Weblogic. During load test (100 users), we found the heap kept decreasing, finally becomes 0% and the server crashes. We checked our database conn
-
first of all, i'm a newbie..sorry for my beginner question. <sql:setDataSource var="datasource" driver="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost/test" user="root" password="123"/> <sql:query var="ts" dataSource="${datasou
-
Cannot find Version, Year, Period dimension while reversing Planning App
Hi I am using Planning application as target for dimension loading. When i try to reverse the planning app using RKM Hyperion Planning. On reversing i could not find Version, Year & Period as datastores after reverse. Is it dependent on planning appl