Windows 127 Error...???

I know there are a lot of topics on this, but I have tried a few things and nothing works.  First I could not update to the newest version of itunes.  By the updater nor manually.  Tried repairing that did not work, then I tired uninstalling, but it wouldn't let me saying it wasn't install properly.  I did some disk clean up and so forth then it installed magically!  However, now itunes wont run...I get the entry point can't be located and then I get the please reinstall itunes message with Error 7 (Windows 127).  I am lost and can't even unistall the program due to it not even showing up on the control panel.  Does anyone have any suggestions?  Thank you so much, this is a headache.

Update your .netframe work to version 4 (see other help posts by apple support)
Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
http://www.reimageplus.com/fix-windows-127-error/   (Many thanks to reimageplus.com)
You will also need to check and verify that the following folders have been removed:
C:\Program Files\Bonjour
C:\Program Files\Common Files\Apple
C:\Program Files\iTunes
C:\Program Files\iPod
C:\Program Files\QuickTime
C:\Windows\System32\QuickTime
C:\Windows\System32\QuickTimeVR
dont forget to remove icloud alsoyou dont need to delete your itune music library though If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)do this for files under  program files and program file (x86) on your computer once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program. Important:-  instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues) i then installed itunes and it all worked fine, should take no longer than half hour to fix hope this helps

Similar Messages

  • Error 7 (Windows 127 Error)

    HELP!

    Update your .netframe work to version 4 (see other help posts by apple support)
    Follow the instructions on this link, basically un-install everything, remove programs that says they are made by apple inc. (using add remove program)
    http://www.reimageplus.com/fix-windows-127-error/   (Many thanks to reimageplus.com)
    You will also need to check and verify that the following folders have been removed:
    C:\Program Files\Bonjour
    C:\Program Files\Common Files\Apple
    C:\Program Files\iTunes
    C:\Program Files\iPod
    C:\Program Files\QuickTime
    C:\Windows\System32\QuickTime
    C:\Windows\System32\QuickTimeVR
    dont forget to remove icloud alsoyou dont need to delete your itune music library though If any of these folders still exist, delete them along with their contents. (if you cant delete them, right click and go to properties and then security and change the control of the fold to you)do this for files under  program files and program file (x86) on your computer once you have deleted everything, restart your computer. Then I repaired my registry using a registry repair program. Important:-  instead of installing itunes I installed quick time, which installs apple application support (this is the corrupt file which is causing all the issues) i then installed itunes and it all worked fine, should take no longer than half hour to fix hope this helps

  • On downloading iTunes onto windows 7 version, I get error 7 shown, stating it is windows 127 error fault

    I have tried to download iTunes onto my computer using Windows 7 Home Premium version, however, each time I have tried, when it says it has been successfully installed, when I click to start it, it shows an error code, ( error7, windows error code 127) IT ASKS YOU TO RE-INSTALL ITunes, & I HAVE DONE THIS SEVERAL TIMES WITHOUT SUCCESS!!            I am really getting fed up about this situation!
    What can I do further?
    I have checked that .NET 4.5.1 is correct & it is installed OK, so what is stopping it installing properly, even though it says it has installed correctly, I still get the error code when trying to start iTunes.
    This has happened on different days over the past Month, I give up for awhile, then try it again, but to no avail, what can I do now please?
    Peter.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • What can I do to download ITunes? It says Error 7 (Windows 127)

    I have deinstalled and restalled I Tunes after it read Error 7 (Windows 127) . I still can not open up I Tunes.   I have an 84-bit Windows 8.1.  Can anyone help me?

    Hi toosar1,
    If you are having issues installing iTunes on your Windows machine, you may want to make sure you are completely removing all of the iTunes components before you reinstall. You may find the following articles helpful:
    Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Apple Support: Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Regards,
    - Brenden

  • Cannot open itunes receive message Error 7 (Windows 127)

    I attempt to open itunes but receive the message Error 7 (Windows 127)
    I am running Windows 7 Home Premium.
    Have been running Itunes for several years using various iphones, at present on 4S and an Ipad 4.
    I have several times uninstalled Itunes, and at the suggestion of support all programmes associated with Itunes, but when I have reinstalled and attempt to start the programme I get the same response.

    Hello veijoverde,
    Thanks for the question. After reviewing your post, it sounds like you are having launch issues with iTunes on Windows. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • ITunes stopped working. Error 7 (Windows 127)

    Suddenly iTunes stopped working. 
    At first my HP Pavillion showed the message "Error 7 (Windows 127)". I googled it, and found  a couple of suggestions. I tried to uninstall iTunes and related program files in the right order, but it didn't work. 
    Now I get this message, and it doesn't help to uninstall iTunes. I allready tried it several times. 
    After googling the message above, I tried to open the iTunes setup file with winRAR, but that didn't work either. 
    Now I get this message:
    Something about the procedure point of entry ADAdPolicy... is not found in the DLL-library.
    When I click 'OK' I get the same message, as I did to begin with "Error 7 (Windows 127)". 
    What am I doing wrong?
    I've spend more than 10 hours total, solving this problem, so if anyone can help me, there'll be best wishes and happy thoughts send your way

    Hi @TroelsDanmark ,
    Thank you for visiting the HP Support Forums and Welcome. I have read about your HP Pavilion Notebook and not being able to use ITunes. Can get to safe mode with command prompt?  sfc /scannow would scan your system for errors at the command prompt.
    Are you downloading ITunes 12.0.1 for Windows ? Current download available here. 
    Do you have 400MB of available disk space to accommodate the download?
    First, try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
    Restart the computer after this step and try installing again.
    You could try this Microsoft fix.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

    updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Still getting same error message. Can anyone help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • I cant download itunes for windows 8.1 error 7(windows 127)

    I get an error message that says I cant download iTunes because I don't have an entry point or something similar to that.  then a second error message popped up after saying error 7( windows 127)

    i go to the website i enter my email and click download and all it says, thanks for downloading but no icon or anything....

  • Error 7 (windows 127) now random windows error

    iTunes prompted me to delete it when it was due for an update so i deleted it and tried to re-install it with the update and it started saying error 7 (windows 127) so i followed the inforamtion on here about that but now it comes up with this:
    An error occurred during the installation of assembly ‘Microsoft.  VC80.CRT,type=”win32”,version=”8.0.50727.6195”,publicKeyToken=”1fc8b3b9a1e18e3b ”.processorArchitecture=”x86’’’.Please refer to Help and Support for more information. HRESULT : 0x800736FD.
    any help would be really helpful thank you!!

    I'm having the same issue.
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="1fc8b 3b9a1e18e3b".processorArchitecture="x86'". Please refer to Help and Support for more information.  HRESULT: 080070002.
    Anyone have a solution?

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • How do I correct a Windows Vista error for HP Officejet 6500 E709n wireless?

    I continue to get a Windows Vista error when trying to install the printer software ...now it does print, but only the bottom half of a page..???

    Dave, I would recommend completely uninstalling the printer from Programs and Features (after unplugging the USB cord if you are using one), and removing the printer from both Device Manager and Devices and Printer.
    We are going to reinstall the printer from one of the downloads that HP makes available, but first I will have to know if your printer is the 6500A or the 6500. Also is your Win Vista machine running 64bit software or 32bit software?
    If you can give me a complete product name and the information on your system, I will link you to the appropriate download.
    Let me know!

  • My iTunes wont update, and I can't connect my new iPhone if it doesn't update. It says error when I try to update, and I cant download it because of a "Windows Installer" error...

    I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
    Where on earth is Tools anyway?
    When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!

    tools is at the top of the apple updater but dont get your hopes up

  • Cannot delete file - tried everything - file in use by Windows Explorer error

    Hi - I have tried now for 2-3 hours trying to delete an .mkv file from my "Downloads" folder
    It says the file is in use by Windows Explorer and cannot be deleted
    I have tried deleting it using Del command prompt as me and as Administrator (I am the Admnistrator, there are no other users) - no luck
    I have tried Safe Boot and then deleting - no luck
    I have tried rebooting many times and then deleting - no luck
    Any ideas? It's driving me nuts

    hi to all who have this bug- "file in use by Windows Explorer error"
    this is the only way that it works:
    1.type cmd in search box
    2.go to the drive and the directory the file is in ,for example:
    after you type cmd you have a black screen with c:\user\
    type in the drive the file is in and hit enter example - d: than hit enter
    than you should see d:\>
    now click the directory the problem file is in ,for example i will call the directory "movies"  type in this-   cd movies
    now you will see this d:\movies>
    to delete the file type this:  del filename.mkv (dont forget the .mkv or any other file extension) don't hit enter yet, first open task manager (cntrl+shift+esc) go to process tab than right click on explorer.exe choose and click on end process
    now your desktop should disappear. get back to the "cmd" window and hit enter.
    now the file is deleted. now go back to the task manager and click on "file" on the upper left corner then on new task then type in "explorer.exe"
    and you are done
    please note that the file name you choose to delete cant be with spaces between the letters .if so you will need to change it in the same way in the cmd window only the comand will be instead of "del filename.mkv"(for example) after you are in the
    right drive and directory:
    rename "test space.mkv" testspace.mkv
    hope i helped
    this is the only way it workes
    Instead of running a CMD prompt and typing everything, just start up Winrar or Winzip, kill Explorer, then delete problem MKV files to your hearts content within Winrar or Winzip.
    Winrar and Winzip will navigate your folders as well.
    After you are done, create a new Explorer task.
    or.....   if you need to rename MKV files, just rename them within Winrar/Winzip with Explorer not running.
    I change the MKV extension to AVI (in Winrar with Explorer killed) in order to avoid Explorer issues, if I ever want to move the files in the future without needing to kill Explorer all the time to do so .
    Using WinRAR works for me. Using the cmd function becomes complicated when I cannot rename my file with the rename command".

  • Creative Webcam Vista, Windows 98, Msn 7.0 and windows protection error

    Hi I wondered if you could help me.
    Im running Windows 98 and have a creative webcam installed. i connect it and it works fine in creative webcam monitor. but when in msn messenger 7.0 i click tools-----> webcam settings the computer then freezes up then after a few minutes the screen goes black with "Windows Protection Error Please Restart Your Computer" comes up.
    I'm also running
    McAfee Internet Security 7
    Spybot
    Ad-aware
    Spywareguard
    A-squared
    Spywareblaster
    Ive also tried running defrag and scandisk to no avail.
    Thanks.

    Can you stop the service manually? I would suggest stopping the service, setting it Manual or Disabled, rebooting, and then run the uninstaller again. Hopefully you won't have to resort to uninstalling the service manually.

  • ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

    iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
    Downloaded latest version onto desktop. Will not complete install.

    Many thanks.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Maybe you are looking for