WINDOWS 2000 NOT ACKNOWLEDGE IPHONE!!

Excuse the translation but not much dominate the English, I am from Chile buy my Iphone and until today I have not been able onseguir
What recognize that the PC is asking me to install a *. inf
Passing Iphone does not have a patch for w2000
As to Apple, could not think of before?
If Ipod recognizes that not Iphone?
I hope to have a soucion my problem.
Hcontrerasc1990 AT hotmail.com

Windows system requirements
PC with USB 2.0 port
Windows Vista Home Premium, Business, Enterprise, or Ultimate Edition; or Windows XP Home or Professional with Service Pack 2 or later
iTunes 7.3 or later
It was advertised upfront that 2000 was not supported.

Similar Messages

Itunes 64bit on windows 7 not reconize iphone

Itunes 64 bit windows 7 not connected iphone, because itunes required iphone same 64 bit ...

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Windows 2000 and the iPhone... am I just screwed?

So I just got an iPhone, and it turns out that waiting 1 hour for customer services just lends to the same issue: the iPhone will not sync with Windows 2000, because the iTunes software will not update to 8.0.
It's not like I have a choice in this matter, because I use my work computer. I can't upgrade to XP becuase I don't have admin rights. What I would have thought is that it would at least recognize the iPhone as an iPod, so I could update my iPhone with all the music I've stored up. (I work for a company whose CEO is on the board of directors for Apple, so they're totally cool with iTunes and Apple products.)
Will the iPhone software ever be set up to be an iPod to earlier versions, or am I just screwed to wait for a new computer?
Now, in a year, the whole company is converting to Macs, so it won't be an issue. But it basically means that my iPhone will never be connected to my computer.
And just as a last gripe... the support phone was just awful. She wanted me to uninstall iTunes and reinstall it, and she had to consult her manager when I explained the Windows 2000 issue. Her response was just, "Sorry, it will never sync. Is there anything else I can help you with?" Thanks.

Windows 2000 is very old. With a CEO on the Apple Board of Directors I am quite shocked that his company's platform is so far behind. Most businesses have upgraded to XP years ago, just as the Mac community has migrated from OS 9 to OS X. It's just a fact of life.
It would be very expensive for Apple (and even Microsoft) to support W2000. I know of no tricks to make it work - the OS has just changed so much in eight years.
I'm sorry this is happening to you, and I wish I had a better answer. I hope someone else has a solution for you...good luck.

Facetime window will not close. (iPhone 6 iOS 8.1.3)

Recently and quite frequently, after a FaceTime call has ended the window will not close out to the normal FaceTime call history screen. Even when I double tap the home button to close out apps, the FaceTime window, still showing my live face and "call with whomever as ended or ending" (it switches between ended and ending when clicking back on the window) will not swipe closed; it just moves up and right back down. I can't even swipe it closed during a live FaceTime as I could before. The only way I've been able to close out the FaceTime app is to power down the phone then turn it back on.
Anyone else experience this? Any suggestions?

Hello nelly_eastside,
Welcome to the Apple Support Communities!
I understand that your FaceTime application is not fully closing after a call. In this situation, I would recommend forcing the application to close and then resetting your iPhone. To complete these steps, please follow the instructions in the attached articles. Please let me know if the issue continues.
Force an app to close in iOS - Apple Support
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Have a great day,
Joe

Windows 2000 not supported by Zen Sleek installation softwar

I have Windows XP at home and MS 2000 at work. I was successful with the Zen Sleek installation software at home, but cannot get the sfotware to install on my work copmputer which is running Windows 2000. What's the deal? The requirements are listed as Windows 98/2000/ME/XP, but at the beginning of the installation, it stops with the message that the application will not run on this operating system.
And are there any other pitfalls to trying to run the Zen Sleek with two different operating systems? I was hoping to get my Zen Sleek to act as my MS Outlook calendar and contacts carrier when I want to travel light.

On your Windows XP computer if the Sleek is recognized as an MTP Device or you see the words MTP anywhere when it first got detected, or everytime when you connect it and a window appears with the words MTP on it, then this means that the Sleek will ONLY work on Windows XP. The software might say that it will work with 2000/98/Me, but it comes down to if the Sleek will work with those OS's.
So if you see the words MTP anywhere, then it wont work with anything but Windows XP.

Zen Micro with Windows 2000 Not Recogni

Help!! My computer operating Windows 2000 no longer recognizes my Zen Micro. It used to but no longer. I have searched through all the help loading everything under the sun with no success. My Micro is operating with Version ..0 that I understand should and has worked in the past with W2000.
Please help. This is ridiculous - no Zen here.

I finally figured that out. With ME or 2000, I needed to:
) download the version firmware to my memory stick
2) take the player and V firmware to an XP machine
3) have the older firmware flashed into the player
4) reinstall the player on the ME machine
I did all that, had Best Buy do the reflash, and it's working now.
A few more questions:
If I later update the computer to an XP, any problem with reinstalling Version 2 firmware (other than loosing stored data in the player)?
Exactly how many features are not supported by version firmware? I'm aware that it won't support subscription services, e.g., Napster To Go, and audible format. Are there any other missing I should be aware of?
TIA
JRC

BUG in IMS 5.2 P 1 on Windows 2000 : not using the correct DNS servers

Hi everyone,
I encountered a queer bug in Ims 5.2 on Windows 2000.
Let me explain it to all of you to avoid spending time and money debugging this problem.
The problem may occur on Windows 2000 Server if the server used was formerly configured to obtain its IP address from a DHCP server (before using it for mail purposes).
Windows 2000 doesn't delete its DHCP client configuration even if the machine is re-configured with a static IP.
It stores the information in an interface registry key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces
If you install IMS52 after this, the server will use the DNS servers configured in the DHCP configuration rather than the ones specified in the static IP config to lookup the MXs.
So if the nameservers configured in the DHCP config are not reachable, the smtp server will systematically fail sending outbond mails.
To avoid this, locate the DHCP interface key in the Registry and remove it.
Remarks :
I know that this situation is not common but it may occur in certain occasions for people like me who are making demonstrations on clients sites.
I'm not sure it is specifically related to DHCP rather than static config. I would say that IMS uses the first interface found in the registry (in alphabetical order) even if this interface is not active...
A good idea is to remove completely from the registry all the interfaces keys not currently used by the system.
Hope this will help some of you.
Best regards,
Vincent MAZARD
DML FRANCE

Interesting. Thank you for the observation. Not something I have seen, either.

Windows XP not seeing iPhone

Device manager not seeing iPhone. Problem began after upgrade to iTunes 8.0.2.20. USB ports working with all other devices. Computer sees iPod nano as does iTunes. Have uninstalled and reinstalled all iTunes components. usbaapl driver appears in DriveStore but because phone is not recognized cannot point hardware device wizard to the DriveStore folder. iPhone working normally otherwise.
Any/all suggestions appreciated.
Thanks, L. Edwards

Windows XP now sees a new piece of hardware but thinks it is a printer.
I can point it to:
C:\WINDOWS\system32\DRVSTORE\usbaapl_246F92BBD6449C86FC3F3F28C40D59AC1F69C558
It searches but comes up with "Cannot Install this Hardware" because the wizard cannot find the necessary software.
I am thinking that I may have a corrupt/wrong driver. Would appreciate any suggestions.
Thanks,
L. Edwards

Windows 8 not recognizing iphone

help!
my windows 8 laptop is not recognizing my iphone 4s, nothing happens when I connect using the usb cable and it also won't recognize our ipod nano.
any suggestions would be appreciated

http://lmgtfy.com/?q=windows+8+not+recognizing+iphone

Windows does not load iphone 5

After taking the latest IOS update, my computer will not recongnize my iPhone 5. I have uninstalled iTunes and re-installed it. I can get my iPod to connect and iTunes sees it, but not my iPhone.

Hi there Randyfromid,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Itunes on windows 8 not recognising iphone 4

I have a windows 8 laptop and installed most updated itunes. But itunes is not recognising iphone 4 at all. Help

Hi Shaashwat,
If you are having an issue with iTunes not recognizing your iPhone because of a compatibility problem, I would suggest you remove and reinstall iTunes using the steps in this article -
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L

Javac windows 2000 not work

I instaled Java 1.4.1_01 but my new windows 2000 don't let me compile .java
so, javac do not work
please help

that's done, do I suppuse to have javac.exe on my /bin
directory?Yes! Are you sure you downloaded the JDK? If you downloaded only the JRE, you will not have any development tools. The JDK is available from the same download page as the JRE.

PDF conversion with windows 2000 not working

Hello all, I have a BSP application that is up and running. When I print with an XP machine, I have no problems. When I print with a windows 2000 machine, I am looping and never getting to the PDF open screen. It just keeps looping but if I try from a XP machine, everything works.
Any help would be appreciated. i have included some of the code.
* Conversion of output format OTF into PDF format
* now convert the final document (OTF format) into PDF format
call function 'CONVERT_OTF'
       exporting
         format                      = 'PDF'
*         MAX_LINEWIDTH               = 132
*        ARCHIVE_INDEX               = ' '
*        COPYNUMBER                  = 0
       importing
         bin_filesize                = l_pdf_len
         bin_file                    = l_pdf_xstring       " binary file
       tables
         otf                         = ls_output_data-otfdata
         lines                       = lt_lines
       exceptions
         err_max_linewidth           = 1
         err_format                  = 2
         err_conv_not_possible       = 3
         err_bad_otf                 = 4
         others                      = 5
if sy-subrc <> 0.
*   error handling
*    message id sy-msgid type sy-msgty number sy-msgno
*            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
* Fill HTTP request
response->set_header_field( name = 'content-type'
                              value = 'application/pdf' ).
* response->delete_header_field( name = 'pragma' ).
* response->delete_header_field( name = 'expires' ).
* response->delete_header_field( name = 'cache-control' ).
* some Browsers have caching problems when loading PDF format
response->set_header_field(
                    name = 'cache-control'
                    value = 'max-age=0' ).
* start PDF viewer either in the Browser or as a separate window
if pdf_in_browser is initial.
     response->set_header_field(
                        name = 'content-disposition'
                        value = 'attachment; filename=BenConf.pdf' ).
endif.
* finally display PDF format in Browser
l_pdf_len = xstrlen( l_pdf_xstring ).
response->set_data( data   = l_pdf_xstring
                      length = l_pdf_len ).
navigation->response_complete( ).

You must remove all the no-cache headers and definitely disable GZIP compression for PDF files.
Look at <a href="https://wiki.sdn.sap.com/wiki/display/BSP">BSP Wiki</a>:
Handling Binary Data
PDF

Icloud sync only works between mac pro and windows outlook, not with iphone and ipad anymore

Hi
Can anyone help me with my problem?
I do have icloud installed on my MacBookPro, on my Windows Outlook computer, on my iPad 2 and on the iPhone 4S.
Now until yesterday everything synchronized perfectly well.
Then I created some groups on my MacBookPro address book and since then (I believe that was when it started) icloud no longer synchs from and to the ipad and the iphone. It still works between the Mac and Windows Outlook.
On the iPad/iPhone I have tried everything but it still won't do. I have even reset the whole iPad and obviously lost all data and tried again. I all sometimes get is a few contacts back into the address book on the ipad. But only a limited number, not all.
Also, to delete the icloud account on the ipad/iphone is sometimes not possible. It just hangs and I can see the message "Deleting..." for ever.
Anyone an idea?
Thanks in advance!

One more comment. Wired connection seem to be stable neither. I have ping running to the Windows computer and after a couple of minutes, it gets broken.
However if I have both WiFi and cable connection to the home router and disconnect from cable (after ping is broken), I get the network to the Windows comptuer back. Nothing serious on the network change, I just get 192.168.1.x instead of 192.168.1.y as IP).
During this network switch I do nothing with the Windows computer.
This is not valid if I want to connect to the Windows computer via Microsoft sharing (smb://192.168.1.x), then it immediately breaks the connection. Can't get it back until Windows is restarted.
Getting lost...

Windows 7 not recognizing iphone

last time I tried updating from ios5 to 6, i had to reset my phone cause it got stcuk in recovery mode. Now I want to back up my phone befor I install ios6.xx, but my iphone is not recognized by Windows 7. Any ideas on how to fix this problem? Thanks in advance.

Did you get your issue resolved ?
I'm assuming the standard links provided didn't help.
My iphone id stuck with the picture of a usb cable connecting to the itunes icon.
I have tried any combination of holding the home button and/or the sleep button for 10, 20 , 30 , 40 60 sec.
But it's still stuck
/Mikael

WINDOWS 2000 NOT ACKNOWLEDGE IPHONE!!

Similar Messages

Maybe you are looking for