Windows 2000 won't boot after QuickTime 7.03 installation!!!

Thank your VERY much Apple for messing a company computer!
An Interactive Tuturial we bought used QuickTime, and the sound sounded like the instructor was underwater.
I then went to this website and downloaded QuickTime 7.03, the version you PUSH with ITunes as I at first did not see your snugged away link to the stand-alone download.
Anyways after the download, I went through the installation, which at the end prompted me to reboot.
Well thanks Apple, now the Windows 2000 sp4, system won't boot at all!!!
Not even in safe mode!!! Hangs during or after loading fltmgr.sys
Not even after having bootet to the Windows 2000 installation CD-ROM and done an emergency repair!!!
Thank your VERY much!!!
Not only have your installation program caused a working computer to become unoperational for half a day, now it seems we have to reinstall Windows 2000, and ALL programs and their settings which were used on it, causing another half a day or more of loss work!!!
Edited by an Apple Host

Due the this recent catastrophic issue and other, with the official Apple Quicktime player, our company have deciced to uninstall all versions of Quicktime, mostly version 6, on our 158 PC's, and install the QuickTime Alternative instead.
http://www.codecguide.com/about_qt.htm

Similar Messages

Windows 7 Won't Boot After Nvidia Driver Installed, MSI Gaming N770

Hi I just bought the MSI Gaming N770 2gb and after installing the nvidia drivers, Windows 7 will not boot after my motherboard POSTs.
I bought this to replace an AMD card. I uninstalled all the AMD drivers before putting in the MSI card. I've also run the Display Driver Uninstaller in Safe Mode and everything.
After a few hours of research, I finally came across a thread about flashing a vbios, and something about these cards not working with motherboards with UEFI bios.
I'm using a P8Z77-I Deluxe mini-itx board, with a Rosewill 630W psu.
I have both 6+2 PCI pins plugged into the two 8pin power ports on the GPU.
Is this an issue that can be fixed with turning off secure boot? or by flashing a vbios onto the card? Or is the card a dud? Or do I have to re-install Windows.
If the vbios is required, are there instructions on how to flash it? I have no idea how to flash a BIOS. Thank you!!

Had to update BIOS. All fixed!!!!

Windows 2000 won't start after iTunes 7.3 upgrade

Yesterday I upgraded to iTunes 7.3 and after the required reboot, windows 2000 hangs on its startup screen. I can boot from the windows 2000 CD and login to the win2k installation on the hard disk using the admin password, but I don't know how to uninstall iTunes from the recovery console. Any ideas?
Dell Dimension 4100 Windows 2000

Was not able to uninstall easyCD creator, but did get windows to start again by following the directions below from the website listed below. Lots of work still ahead to get it back to normal, but at least I didn't lose all my data.
http://forums.techguy.org/windows-nt-2000-xp/127361-help-inaccessiblebootdevice-stop-0x0000007b-blue.html
Method 1: Use a Backup Registry System Hive to Edit the Registry
Use the Windows 2000 CD-ROM to start the computer.
If you need a third-party hard disk controller, press S to specify an additional device, and then insert the floppy disk that contains the correct driver for the hard disk controller.
Press R to repair a Windows 2000 installation.
Press C to use the recovery console.
Log on to the Windows installation that you want and type the Administrator password.
Change to the %windir%\System32\Config\ directory. To do this, type the following command at the C:\Winnt prompt (where C: is the drive and Winnt is the directory where Windows 2000 is installed), and then press ENTER:
chdir system32\config
Type ren system system.old, and then press ENTER.
Type copy C:\winnt\repair\system, and then press ENTER. The following information appears:
1 file(s) copied.
Type exit, and then press ENTER to quit the recovery console and restart Windows.

Windows xp won't boot after cloning hard drive to a bigger drive

I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??

wsev1955 wrote:
I have a HP Pavilion Dv4170us laptop added some new upgrades to it.. max RAM 2GB... a new battery... and I bought a 160GB samsung IDE drive to replace the origional 100GB drive...Using EZ Gig II software and usb drive adapter I successfuly cloned the smaller hard drive but when I swaped them out it won't boot windows xp.. just a black screen with the blinking curser at the top left corner... using my windows xp pro disc.. i ran the system recovery and tried first fix mbr command... then I tried fixboot.. I also looked for the boot.ini file which is not in the C: root drive...I only found a back up copy of it in the windows/pss folder... this is on both drives.. so the cloeing copied it all... but the origional drive will boot and the new one won't... I even tried reinstalling XP as a repair installation...still nothing... any ideas??
Hi,
Can you see the new hdd in the BIOS?
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Windows 7 won't boot after hard shut down

Earlier today while in Windows and using Steam, Windows locked up. I gave it about 30 minutes to see if it would unlock, but when it wouldn't I decided to do a hard shut off. Now when I try to boot to Windows, I'm able to select the windows disk, get to the blinking cursor that is usually right before the Windows 7 loading screen, but after the cursor the screen just stays black forever.
I'm wondering if there is any way to try to fix this without having to reformat. Also, if reformatting is the only option, have people found that their original Windows 7 keys are reusable? I know that they key gets locked to a machine, but I don't know if it being a Mac machine has any effect on that.
Thank you for the help.
Also I didn't see an appropriate forum category for this. If one is more fitting than this one, I apologize.
Message was edited by: Rweir

“Troubleshooting Windows 7 Inside Out” Coming October from Microsoft Press by Windows 7 News Editor
Restoring Windows from system image (requires you made a backup image first)
http://www.winsupersite.com/win7/totw/repair.asp
Windows Recovery Environment and Startup Repair
http://www.winsupersite.com/win7/ff_winre.asp
Retail version is not locked to one machine, and can be reinstalled multiple times.
Your first thing would be to boot from Windows 7 DVD and let it attempt a repair. Not that different from Mac OS. There is also Safe Boot, chkdsk, uninstall programs and drivers, and of course you might want to install CCleaner and use that to keep temp files to a minimum and your system running smoothly.
But instituting a backup strategy should be one of the first things to do after getting it installed and updated.

Windows 7 won't boot after adding a third partition with gparted

I needed extra space on my bootcamp partition so I :
1. resized macintosh hd partition with disk utility
2.booted with gparted live disk and "growed" the bootcamp partition
Now Windows doesn't boot. Any suggestions?

Hi,
your Topic says '...adding a third partition' whereas in your message you don't mention this third partition...
So what is the right one ?
Nonetheless you might have a look at EasyBCD http://neosmart.net/dl.php?id=1 to repair the Windows 7 bootloader.
Regards
Stefan

Windows 7 won't boot after I installed GRUB

Hello,
I just installed Arch Linux on my laptop with Windows 7. I followed the Beginners Guide. However, when I did "grub-install --target=i386-pc --recheck /dev/sda" it said something along the lines of:
warning, no BIOS boot partition, embedding is not possible
warning, embedding is not possible, need to use blocklists
error, will not proceed with blocklists.
Now, I think this was my mistake. I decided to use the --force option. Now grub works, and boots to linux, but when I try to boot to windows, windows says Windows failed to boot.
Please help, and if I have missed any information then just ask me.
Grub version is 2.02 beta 2-4.
Grub is booting Windows, but Windows displays this:
Windows failed to start. A recent hardware or software change might be the cause.
Thanks a lot!
Last edited by 097 (2014-07-10 22:20:23)

Actually, there already is an entry for Windows 7. It just doesn't work. Here it is:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (on /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-AC66E08666E0529E' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 AC66E08666E0529E
else
search --no-floppy --fs-uuid --set=root AC66E08666E0529E
fi
chainloader +1
### END /etc/grub.d/30_os-prober ###
Also, when I ran gdisk, it says this: Found valid GPT with protective MBR; using GPT.
Can I just ignore that?
Thank you for your help!

[SOLVED] Arch won't boot after I created a separate /var parition

Arch won't boot after I created a separate /var parition on an existing installation.And let me confess: it was maybe stupid trying to do it on an existing install.
I edited the fstab correctly, copied the files using rsync preserving permissions. Then I kept a backup of /var using tar. Then went on to delete everything under /var, ie /var/*, the /var folder is still there. All this I did from a live CD. After that I booted into my arch linux. Here I get messages about systemd successfully finishing fsck on each of my partitions, then the screen starts blinking. And there is no more output. Pressing Ctrl+Alt+Delete causes systemd to stop its services and reboot.
Having realized I had borked my system, I removed the /var line from fstab and restored /var from the tar file I made earlier. Again I did this from a live cd. Rebooted into my arch system, and again similar issues, namely that after fsck and messages informing a few services had started, the screen keeps blinking.
The live cd I used for reorganizing my partitions was elementary OS freya. They have GParted in there. I also have an arch install iso lying aroung from May 2013. If necessary, I can download the latest version. I am currently typing from a Windows installation I dual boot from.
I don't know how to extract any boot logs as I am locked out of the system. Here is my fstab in any case:
# Filesystem information
# /dev/sda5 LABEL=fs_root
UUID=b9d739cf-fd8c-46dd-a919-bd827dc47c66 / ext4 rw,noatime,data=ordered 0 1
# /dev/sda9 LABEL=fs_var
UUID=ec0f7a49-dccd-43ab-8651-9aa3fdb41cc7 /var ext4 rw,noatime,data=ordered 0 2
# /dev/sda2 LABEL=fs_boot
UUID=0e8ab31a-3bda-4b85-a901-a36f21b1583d /boot ext2 rw,noatime 0 2
# /dev/sda6 LABEL=fs_home
UUID=d9e63c47-274e-447f-ad01-0d97afe0fd34 /home ext4 rw,noatime,data=ordered 0 2
# /dev/sda7 LABEL=fs_swap
UUID=7301227c-e9f3-41b8-9d0f-4cf3c159491c none swap defaults 0 0
# /dev/sda3 LABEL=fs_win
UUID=12B639D1B639B5D7 /fs_win ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,nofail,noauto,x-systemd.automount 0 0
# /dev/sda3 LABEL=fs_share
UUID=D272269772268079 /fs_share ntfs uid=1000,gid=1000,dmask=027,fmask=137,showexec,noauto,nofail,x-systemd.automount 0 0
I would greatly appreciate any help.
Last edited by richcocoa (2015-05-03 18:04:44)

Have you moved everything from /var to /new_var (i named it for learning purpose)? You shoud copy content from /var but not on the fly but booting from arch iso cd, and than you shoud mount your / into arch-chroot environement, mount all of your mount points and than copy content from default /var to new /var. The copying should be done with this
cp -rax
and you can add -v switch to verbose output. I have my own /var moved the same way.
The simples way is:
-boot the arch iso cd
-mount all of your mount point (i created here in this step /new_var to move /var to a new place, and this /new_var i put in /etc/fstab as /var later)
-copy /var to /new_var with -rax or -vrax (recursive, archive, this filesystem or verbose, recursive, archive, this filesystem switches)
-umount all of it
-reboot.
Last edited by firekage (2015-05-02 07:49:20)

Mac won't boot after power chord became unplugged accidently.

Mac won't boot after power chord became unplugged accidently.
I have a Mac Mini running very latest version of OSX. I was making a recording with QuickTime; when I needed to plug in a USB recording device into the back of the Mac Mini, as I pulled the Mac off my shelf to do this, the power cable came out and the Mac lost power.
I plugged it back in and powered up the Mac. I get the grey screen with Apple logo and the spinning grey wheel; then it goes to a blue screen (as usual) and I get the "starting OSX..." progress bar. When the progress bar finishes, I'm left with a blue screen only, no dock, no apple icon at top left, nothing across the top, no nothing.
So far, I've booted from the original disc and repaired the permissions as well as the disc, then re-booted, but same old blue screen.
I have another iMac G5 machine, so is there any way I can at least retrieve the important HD files from the Mac Mini to my G5, before throwing the broken Mac Mini away?
Can anyone advise please?

Hi, Nigel.
Not to differ with my colleagues here, but there's an important question that wasn't asked.
1. You wrote: "So far, I've booted from the original disc and repaired the permissions as well as the disc, then re-booted, but same old blue screen."Did Disk Utility report any errors it could not fix when you ran Repair Disk? I suggest you run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
2. You may also want to run the Apple Hardware Test that came with your Mini to be sure nothing shorted when the power cable was removed from the computer. I've seen it happen, hence I usually recommend removing the power cable at the wall before disconnecting the power cable from the computer. See my "Apple Hardware Test" FAQ.
3. Repair Disk gives your Mini a clean bill of health, the blue screen may be the result of some Startup or Login item that was corrupted due to the sudden power outage. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem and may help you avoid and Archive and Install.
4. If you elect to go the Archive and Install route, see my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
5. As FYI, this is the kind of problem that makes one glad they've implemented a comprehensive backup and recovery solution. For advice on the backup and recovery solution I employ, see my "Backup and Recovery" FAQ. Computing without a comprehensive backup and recovery solution is like driving without auto insurance.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Desktop PC with Windows Vista won't boot up

My Acer Aspire 180 Desktop PC with Windows Vista won't boot up and has a Recovery error message that says it shut down unsuccessfully. Can someone help me with this issue?

If you have Recovery Disk then try to repair install. If you do not have then you have to contact Acer Support for getting them.
Once it is recovered you must update the Graphic Card Driver. Visit the website of the Graphic Card manufacturer to update it.
S.Sengupta, Windows Experience MVP

Macbook pro won't boot after installing update 10.9.3

macbook pro won't boot after installing update 10.9.3

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear.

MacBook Pro won't boot after trying to install 10.7.3 update. Start up stalls at Apple logo and spinning gear. Computer won't even start in safe mode.

My daughter's MacBook Pro was doing exactly the same thing. I don't know if it had anything to do with the latest update. She called me about a week ago saying that her MacBook began running slower by the day . She then called me Friday and told me that it wouldn't get past the gray screen and the gear just kept on spinning. I did everything I could over the phone including Safe mode which it wouldn't go into and thought maybe it was the hard drive. She took it to the Apple store. Originally, they also thought it was the hard drive. It ended up being a corrupted operating system (Lion). Apple genius simply re-installed Lion and she's back up and running. Good thing she backed up right before it crapped out. She'll be restoring everything tonight. Don't know if re-installing Lion will help your situation, but it did the trick for my daughter.

Windows 7 slow to boot after setting up windows backup to additional drive.

I have an issue with windows taking forever to boot after setting up Windows backup.
PC Setup:
2 Samsung SSD Mirrored for Hardware raid on (MOBO OS/Programs)
2 Seagate 4TB Mirrored for Hardware raid (Data storage)
1 Seagate 4tb HD used solely for Windows backup. (Have also tried with multiple other drives with same outcome.)
If I have all drives connected without setting up the Windows Backup, system will boot up in 37 seconds. As soon as I enable the backup to the additional drive, it kills the boot time. Brings boot time to over 2.5 mins. Brand new PC, clean
installation, no antivirus or any other software that could be slowing it down. If drive is just in PC as an extra drive there seems to be no issue, just as soon as I enable the Windows Backup to additional drive. Never noticed this issue on any other
PC

Log booting process (set it in F8 menu).
Regards
Milos

Mac won't boot after updating to OSX 10.6.4

I am on my 3rd Mac that won't boot after updating to OSX 10.6.4. One MacBook Pro and two iMacs. I fixed one but the last two are getting the better of me. HD is not fried. Have tried every keyboard shortcut on startup, Disk Warrior via. Target Disk, repairing permissions in single user mode. The machines will not boot off of a CD or DVD and it will not boot up in safe mode. Something in the startup files is preventing startup. I am suspecting Sophos antivirus. I tried to uninstall it and trash it but I think it's still blocking something. Any help would be appreciated.

Got it! Not sure if removing Sophos had anything to do with it but here's what I did.
1) boot dead machine in Target Disk Mode (iMac)
2) boot good machine off Snow Leopard disk (MacBook)
3) install OS to dead machine- I found this next part very curious. When the install was complete the MacBook restarted as the iMac.
4) ran software updates
5) shut down MacBook then shut down iMac
6) rebooted iMac- all was good
I actually did this twice because a co-worker had the exact same problem on her MacBook Pro. Got both fixed today.
Thanks everyone for your help!

My MacAir 1st gen. won't boot after latest OS X Lion update.

My MacAir 1st gen. won't boot after latest OS X Lion update. tried safe boot(didn't work) tried disk repair, said it was successful, but my mac won't start up. Just get white screen. Also been having trouble with it overheating. Fan seems to work. But when it get too hot whole interface slows down.

Yikes, I hope you have AppleCare on it still, I think it needs to be taken in, but as a last ditch effort...
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.

Windows 2000 won't boot after QuickTime 7.03 installation!!!

Similar Messages

Maybe you are looking for