Windows 2003 & Darwin Streaming Server

Hello all. I am trying to install the Darwin Streaming Server on one of my Server 2003 systems. However, it hangs at Adding userName during the intall when I use ActivePerl 5.8.0-5.8.6. If I use 5.8.7 it will get past that part but says that I need to install ActivePerl 5.8.0 or better to do the streamingadminserver.pl part of the install. It would seem to me that 5.8.7 is greater than 5.8.0 so why is it asking to do that? I verified that the perl interpreter was in the PATH like the manual says to do but is there something else that I'm missing here?
Windows XP

Yes you can intall DSS on a TIger machine, this is what I have done however I haven't really tested it out yet

Similar Messages

H.264 Settings for Darwin Streaming Server

I would like to encode H.264 for unicast streaming delivery off of the Darwin platform. We've done a lot of testing and the .mov encodes that we've been putting out at 768kbps (hinted for streaming) have been serving quite slow and choppy off of anything other than a T1 connection.
I've seen some H.264 .mp4 encodes at 350kbps that look incredible streaming but we cannot duplicate this size and quality for some reason with our own video.
At 480x270, or something around those dimensions, I was wondering what the best bit rate and format would be for streaming delivery off of the Darwin platform?
For Darwin we are running 5.5.5 and we are using Compressor 3.0.1. All testing is being done with Quicktime 7.2 on Mac Pro machines over various types of connections.
Thanks,
Mike

After looking through the apple manual I found this:
Resetting the Streaming Server Admin User Name and Password
If you forget the Streaming Server Admin user name and password, you can reset them.
To reset the user name and password:
1 Log in to the server computer as root, open a terminal, and type the following:
qtpasswd someUserName
where someUserName is a name of your choice.
2 Follow the prompts by entering the administrator user name and a password you want to
assign to the user someUserName.
3 Using a text editor, modify the /Library/QuickTimeStreaming/Config/qtgroups file.
For Windows, modify the c:\Program Files\Darwin Streaming Server\qtgroups file. For other
supported platforms, modify the /etc/streaming/qtgroups file. Modify the file so that the user
name you just created or modified is included in the group Admin, as follows:
admin: someUserName
4 Save the file as ordinary text (not .rtf or any other file format).

Darwin Streaming Server won't open Broadcaster

Darwin Streaming Server won't open Broadcaster.
"start broadcaster" doesn't work from my Quicktime Streaming Server control panel.
Then if I open Broadcaster manually, I of course, am not granted access from the Streaming Server control panel.
Please advise.

Hi MTD14S,
What was the format of the url and do you have an example of a website where opening this url failed?
Also I would recommend resetting Firefox. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

JMF and the Darwin Streaming Server

Has anyone been successful in getting the JMF JMStudio to work with
the Darwin Streaming Server? I have set up Darwin on my computer and
encoded a sample .mov file using a codec that is supposed to be
compatible with JMF, the H.263. I was able to view this file inside
JMStudio if I opened it directly as a file. I was also able to stream
this file via the server using the Quicktime movie player by opening
URL to rtsp://localhost/test.mov
However, when I go into JMStudio's Open URL, and put in
rtsp://localhost/test.mov, I get an error message saying:
Controller Error:
Failed to realize: Server is not responding.
I am using JMF Version 2.1.1e and the Apple Darwin Streaming Server
5.0
If anyone has any suggestions, please let me know. Also, let me know
if there is another streaming server, preferably open source, that
works well with JMF.
thanks.

your doing local host, JMF needs to receive rtp on
port XXXX, now if you are receivng on port XXXX the
server maybe trying to send on the same port , or
maybe it's trying to send the RTCP data.
Does darwin use RTCP ?? and also I would try from
second computer , as JMF sends, receives on same port.I am pretty sure all the ports are set up correctly. I have tried connecting from another computer and run into the same issues. Also, I was able to view the movie just fine from the same computer (connecting to itself) using the Quicktime Java package provided by Apple. I've been able to view movies in quicktime using the RTSP protocol

Darwin Streaming Server on Tiger Desktop?

Is it possible to run Darwin Streaming Server on Tiger desktop. I don't have the 10.4 server. I make a lot of FCP videos and need to use DSS for testing.
I dowloaded the binary from ADC. That site says it only runs on the server, Linux, BSD or Intel.
Alternatively could I compile the source for 10.4 Desktop with XTools?
Thanks

Yes you can intall DSS on a TIger machine, this is what I have done however I haven't really tested it out yet

Darwin streaming server

I can't find a discussion area dedicated to Quicktime or Darwin Streaming Server technologies, so since I am working on a MacBook Pro I'll put my initial question here... if anyone wants to direct me to a more appropriate forum, please do!
The problem: I have gone through the Darwin Streaming Server installation process (using Apple's provided installer for v5.5.5) and no errors were reported until the server setup part (via Safari). At that point I was informed that the server had not started as it should have, as part of the installation. I have tried manually launching the QuicktimeStreamingServer executable from Terminal, but it gives me the error "Bad executable (or shared library)".
Any help welcome!
Thanks...

Hi Matt,
I spent a few hours troubleshooting this since I got the same error message. Giving up, I decided to download an earlier version:
http://www.opensource.apple.com/projects/streaming/release/DarwinStreamingSrvr5. 5-OSX.dmg
Version 5.5 was able to install correctly and immediately took me to the Darwin Streaming Server Admin url.
I'm using 10.5.1 on a power pc [intel dual core]

Darwin Streaming Server & Quicktime Broadcaster Problems

recently upgraded to Darwin Streaming Server 5.5, and am having difficulty with it. I keep getting the following error when I try to change the settings under the Broadcaster sidebar menu item.
Error - Perl execution failed
Can't call method "state" on an undefined value at /Library/QuickTimeStreaming/AdminHtml/parse_xml.cgi line 1365.
The line that this error references is:
if (($broadcasterConn->state = 0) && ($theAction eq 'SaveBroadcasterSettings')) {
Additionally, If I select "Broadcast" in QuickTimeBroadcaster, I am presented with this error:
Connection Failed (-5420)
I have not experienced these errors with the previous version, which I uninstalled. When I reinstalled DSS I received a "Successfully Install" Message.
And...for what its worth, this is the version of perl I am using:
This is perl, v5.8.6 built for darwin-thread-multi-2level
Any help is greatly appreciated.
Thank you.

We use 10.3.9 server here on three different machines. Two of the three disconnect from Broadcaster after about half an hour, with the -3285. The third system will not even allow a connection to start, ever. I am thinking that the automatic unicast file has a permissions issue. All of the three servers have Open Directory enabled. I want to turn it off, but I am not sure what will happen to the rest of the server's abilities if I do. Does anyone run in an Open Directory disabled configuration?

Quicktime Broadcaster 1.5 and Darwin Streaming Server 5.5

Since i upgraded to Quicktime Broadcaster 1.5 (as i want to use H264) i can't use any more the Automatic Unicast (Announce). It says 'Broadcast error disconnected (-3285). I updated to Darwin Streaming Server 5.5 (on SuSE 9.1 Linux on a hired server with 2 IP's, one binded to DSS, the other to Apache to enable Streamin over port 80) but it doesn't help. I tried with Wirecast instead and everything workes fine (at least it created the .sdp file correctly) so i don't think the problem is in the Streaming Server Set up. Anyone has experienced something similar with the new Broadcaster?

We use 10.3.9 server here on three different machines. Two of the three disconnect from Broadcaster after about half an hour, with the -3285. The third system will not even allow a connection to start, ever. I am thinking that the automatic unicast file has a permissions issue. All of the three servers have Open Directory enabled. I want to turn it off, but I am not sure what will happen to the rest of the server's abilities if I do. Does anyone run in an Open Directory disabled configuration?

Issue with SAP Authentication in a Windows 2003 64 Bits Server

Hi Experts
    I have an issue in a Windows 2003 64 Bits Server in CMC when i'm in the authentication section i choose SAP the Role Import works fine and I can see the Users Group from SAP BW but the users don't appear.
    I try the same thing in a Windows 2003 32 Bits with the same parameters and works fine i can see de User Groups and The Users from the same BW Server.
I Think i could be a problem with the 64 bits server the issue is the users from SAP BW are not imported.
Regards Marvin Soto.

Hi Ingo,
              we have some thing similar issue. can you please help us out.
We Imported users and in options we selected concurrent and every thing worked fine up to 1 month and then automatically our license key say you have only 2 named users. we have a license key for 100 named users now. do we need to delete all the concurrent users from sap now and we need to re-import them by selecting named in options tab of sap. what is the work around for this. i tested by changing the one of the sap user profile to named instead of concurrent, then i am able to login to infoview using sap credentials but when i open a report its says you don't have enough license to perform this operation. can i know why is this happening.
            Environment:
                                   BOBJ XI 3.1, SUN SOLARIS, SAP INTEGRATION KIT.
Thanks,
SK.
Edited by: Siva Vallabhaneni on May 27, 2009 3:28 PM

How to convert JPEG Files into Streams for Darwin Streaming Server?

Hi!
Is there any possibility to convert JPEG Files locatet in a Folder into a Videostream for the Darwin Streaming Server, like Quicktime Broadcaster does with my iSight Video??? I know I can convert JPEGs into Movies using QuickTime Pro, but that is not exactly what I am seraching for: I have a folder, where some kind of Webcam writes about 5 JPEG pictures per second. Now I would like to have these pictures in converted into a videostream in realtime. QuickTime Broadcaster would be the weapon of choice if it would accept JPEG Files as input...
Is there any posibility to solve this problem??
CU Jan

Hello Karthik,
I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
Do you still have any other suggestions?
Thank you

Darwin Streaming Server Files Help

I purchased a Lynux server to stream movies of well, lots of stuff, and I downloaded the darwin Streaming Server Files. I did a mass upload FTTP and well seems relayconfig.xml is a sample??? What all do I have to change in this, and do I need one for every movie? do i change the title of the file for each movie? like relayconfig1.xml, relayconfig2.exm ect?
ANY help yould be greatly appreciated

The mount point is supposed to be the location on the hard disk where the movie file resides; the sdp extension indicates that the file is a stream. To create a SDP file, try using the information linked to from this page.
(14906)

Uninstalling Darwin Streaming Server

Hello Experts,
Quick question, How to completly uninstall the Darwin Streaming Server from Mountain Lion ?
Thanks for your time.

No uninstaller or instructions; wonderful
I would broadly follow How To Uninstall Darwin Streaming Server 5.5.3 on Mac OS X
in conjunction with a list of files for the current version (if that's what you have), obtained by pointing Pacifist at the install pkg. I advise against using Terminal to remove the files.
Backup first, in case of problems.

Unable to install Darwin Streaming Server on Windows2000 Professional PC.

Is Darwin Streaming Server supposed to work on a Windows2000 professional PC ? I'm having problems with it.
Thanks,

Hi sdhandu,
first of all: WELCOME TO THE DISCUSSIONS!
As far as I understand this article you cannot use it on a Windows2000 PC: Darwin/QuickTime Streaming Server 3: System Requirements

Broadcaster, Darwin Streaming Server, IP problem?

I'm pretty sure this is a DNS issue. Hopefully someone has some simple advice out there.
I'm using an MacBookPro, Broadcaster and Darwin Streaming Server.
Attempting to create a .mov file that will deliver a live stream.
1) I created a new QT player and assigned the movie rtsp://192.168.0.105/myteststream
2) Then I saved the movie as whatever.mov
3) I then uploaded whatever.mov to a remote server.
Now if I call on this file from my local network "http://www.mydomain/whatever.mov" (using any comp here - Mac, PC) I can view the streaming movie with no problem.
However, anyone else is unable to view it. They get a broken QT error. (10060)
I'm thinking that the "192.168.0.105" IP is incorrect. (local?)

I'm thinking that the "192.168.0.105" IP is incorrect. (local?)
That is a local IP address, and it will only work for someone within your network. To find the correct IP address, go to this page from any computer on the LAN and note down what it reports.
You may also need to open ports used by RTSP on the firewall if you have one, and configure port forwarding on the router so that those ports are forwarded to the local IP of the computer hosting the stream.
(15006)

EPMA(Hyperion 11.1.1.3) installation Errors - on Windows 2003 64 Bit Server

Hi,
We trying to install Hyperion 11.1.1.3 components with Hyperion Strategic Finance and EPMA on 64 Bit Windows 2003 R2 Server. We are installing all components on a single server. In the installation process while checking the components, we are getting this below error message.
"component strategic finance web services cannot be installed
hfm and epma 64-bit componentscannot co-exist with 32-bit component for hsf/fdm
component performence architect dimension server services cannot be installed
hfm and epma 64-bit components cannot co-exist with 32-bit component for hsf/fdm"
Please share your valuable suggestions to go ahead with this installation,
Thanks in advance for your earliest replies
***Chinna***
Edited by: Hyperion Chinna on Jul 22, 2010 5:10 AM

Srikanth,
The New Atlanta ServletExec portion of the xMII 11.5 installation is not fully compatible with 64 bit windows. Here is a good reference for you: http://www.newatlanta.com/c/support/servletexec/self_help/faq/detail?faqId=296
Regards,
Jeremy

Windows 2003 & Darwin Streaming Server

Similar Messages

Maybe you are looking for