Windows 2003 R2 installation failing with ORA-12154

Windows 2003 R2 Enterprise default installation, no Windows Updates at all
Pentium 4, 2 gb ram, 127 gb hard drive
In a workgroup using DHCP
Installed Microsoft Loopback Adapter as per installation docs (which I read)
Default installation of Oracle 10g R2 Enterprise, which installs a starter database.
During the step Creating and starting Oracle instance with Clone database creation in progress at 46%, an error dialog appears:
ORA-12154: TNS:could not resolve the connect identifier specified.
The same problem occured when using a static IP address. About a year ago I followed the same steps with 2003 Enterprise (not the R2 version) and was successful. I also tried installing on XP Pro Service Pack 2 and failed at the same point.
At this point I am completely unable to install Oracle 10g R2 on Windows using the default options. I even tried just installing Oracle without the starter database and then use DBCA to create a database. It failed to create a database.

some more information
I’ve just restarted the server with its full quota of 16GB of RAM and selected both boot.ini switches (/PAE and /3GB) at server startup. I then amended the dbblock_lru_latches parameter from 128 to 64. Before I even started the database I tried running ‘ipconfig /all’ at the command prompt with the following result:
D:\Oracle>ipconfig /all
Windows IP Configuration
An internal error occurred: Insufficient system resources exist to complete the requested service.
Please contact Microsoft Product Support Services for further help.
is it windows causing these issues?
rgds
alan

Similar Messages

Oem 12.1.0.3 installer fails with ora-01017

Greetings,
I am attempting to upgrade my OEM 12.1.0.1 installation to 12.1.0.3. I am following the instructions in the Oracle Enterprise Manager Cloud Control Upgrade Guide and Oracle Support Note 1568143.1. I have verified that all prerequisites are met and have installed patch 11061801 to the repository. The repository and OMS are on different machines. The 12.1.0.1 installation is able to connect to the repository, it has been running successfully for some time now. On the OMS server I stopped the OMS and the Agent and I invoke the 12.1.0.3 installer. I follow the steps and when it gets to the connection page it fails with ORA-01017. The messages are shown -
1. Verify if the SYS password you entered is valid.
2. Verify if the database initialization parameter REMOTE_LOGIN_PASSWORDFILE is set to either Shared or Exclusive.
3. Verify if a password file with the file name orapw<SID> exists in the <ORACLE_HOME>/dbs directory.
All conditions are met:
-bash-3.2$ echo $ORACLE_SID
oemrepos
SQL> connect sys as sysdba
Enter password:
Connected.
SQL> connect sysman
Enter password:
Connected.
SQL> show parameter remote_login_passwordfile
NAME TYPE VALUE
remote_login_passwordfile string EXCLUSIVE
-bash-3.2$ ls -l $ORACLE_HOME/dbs/orapwoemrepos
-rw-r----- 1 oracle dba 1536 Jan 30 2013 /usr/local/oracle/app/oracle/product/11.2.0/dbhome_1/dbs/orapwoemrepos
I am able to connect remotely from another machine. sqlplus is not installed on the OMS server.
I am completely stumped and in need of assistance. Searching the web only indicates that I need to insure that the above listed conditions should be met, they are. If anyone has any suggestions I would appreciate the help.
Thank you.
Bill Wagman

On repository server , can you login as sys user ?
Try to connect through listener and share the result.
sqlplus sys/<password>@<connectstring> as sysdba
Thanks
Rajesh

IDES 46E with windows 2003 server Installation errors..

Hi,
Can some body help me in IDES 46E with windows 2003 server Installation?.I'm tired of installing with this combination on my desktop my env as follows.
1.Windows 2003 Server
2.JDK.142
3.Oracle 9.0.2 with 7 patch
4.IDES 46E
Installed successfully Database and SAP but while exporting data in to tables then getting errors.
Thanks in advance..
Sreedhar

Hi GreetZ,
I opened the respective 3200,3300,and 3600 ports and I can access my router from outside home.I can also ping <IPAddress> and telnet<IPAddress> successfully.But I'm unable to telnet <IPAddress><space>3600 giving error..connection failed on port 3600 and same error for remaining ports too.Pls help me in fix this issue.
Thanks for your replies..
Sreedhar

Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggest

Please run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Client installation fails with error: The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client wil not be installed.

Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?

Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent

Export fails with ORA-24324

After registering any XML Schema export fails with ORA-24324. any suggestions?
Platform is Windows 2000, db characters: UTF-8
exp system/manager@syzxml owner=(syzem) file=a.dmpExport: Release 9.2.0.4.0 - Production on Sun Nov 23 09:52:13 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
Export done in EE8MSWIN1250 character set and AL16UTF16 NCHAR character set
server uses AL32UTF8 character set (possible charset conversion)
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SYZEM
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user SYZEM
About to export SYZEM's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
EXP-00056: ORACLE error 24324 encountered
ORA-24324: service handle not initialized
EXP-00056: ORACLE error 24324 encountered
ORA-24324: service handle not initialized
EXP-00000: Export terminated unsuccessfully
v$version:
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
PL/SQL Release 9.2.0.4.0 - Production
CORE 9.2.0.3.0 Production
TNS for 32-bit Windows: Version 9.2.0.4.0 - Production
NLSRTL Version 9.2.0.4.0 - Production
dba_registry:
COMP_NAME STATUS
VERSION
Oracle9i Catalog Views VALID
9.2.0.4.0
Oracle9i Packages and Types VALID
9.2.0.4.0
Oracle Workspace Manager VALID
9.2.0.1.0
Oracle XML Database VALID
9.2.0.4.0
nls_session_parameters:
PARAMETER VALUE
NLS_CALENDAR GREGORIAN
NLS_COMP BINARY
NLS_CURRENCY z│
NLS_DATE_FORMAT RR/MM/DD
NLS_DATE_LANGUAGE POLISH
NLS_DUAL_CURRENCY z│
NLS_ISO_CURRENCY POLAND
NLS_LANGUAGE POLISH
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NUMERIC_CHARACTERS .,
PARAMETER VALUE
NLS_SORT POLISH
NLS_TERRITORY POLAND
NLS_TIME_FORMAT HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT RR/MM/DD HH24:MI:SSXFF
NLS_TIMESTAMP_TZ_FORMAT RR/MM/DD HH24:MI:SSXFF TZR
NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR

Try use export utility version 9.0.1.1.1 or
store XMLType as CLOB.

App installation fails with error 0xE8000004

hello,
i have purchased a navigation (GPS) application for iphone and ipad but installation fails with error 0xE8000004, even if the application is the only one (i have removed all other apps). I have tried on iphone and ipad and using different OS: Windows 7 professional 64 and Windows XP 32.
Has anyone an idea of the problem ?

Already done and this was the reply:
Response (Frederick) - 03/01/2011 12.59 PM
Dear Ettore,
Thank you for contacting CoPilot Technical Support.
If you are experiencing download issues between two Apple platforms (here between the iPhone and iTunes), I advise you contact Apple directly from your purchase history in iTunes then 'Report a problem' as ALK is not in charge of the installation on this device.
Then i contacted Apple and the reply was:
Ettore, please call up to the iPhone technical support. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
I am a little bit disappointed.

Loosing connections with ORA-12154

Our scenario goes like this. We run transaction(1000's) fine for a while
(hours!), then we get the following errors in sequence for short period of
time(~2-5 minutes):
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
Our application, during that time, stops with ORA-12154 from Oracle. Then
everything seems to recover fine and we process transaction again fine for
hours. Why would we loose the connections like this while we are running
transaction non stop through the system?
Regards,
Andre Dionne

We are running on solaris 8. This morning we tried to start the application
servers with the minimum connection equal to the maximum(150) and we got
ORA-12154 after creating 122 connections. Could it be related to the Oracle
OCI8 driver we are using?
"Joseph Weinstein" <[email protected]> wrote in message
news:[email protected]..
>
>
Andre Dionne wrote:
Our scenario goes like this. We run transaction(1000's) fine for a while
(hours!), then we get the following errors in sequence for short period
of
time(~2-5 minutes):
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Connection for pool "bankframePool" created.
<JDBC Pool> Sleeping in createResource()
<JDBC Pool> Sleeping in createResource()
Our application, during that time, stops with ORA-12154 from Oracle.Then
everything seems to recover fine and we process transaction again finefor
hours. Why would we loose the connections like this while we are running
transaction non stop through the system?
Regards,
Andre DionneHi. For stability and performance, I recommend defining your connectionpool
to make all it's connections at startup (init = max). Oracle is sometimesweak
when being asked for lots of connections at any one time. Sometimes itgets overrun,
and fails some connection attempts. Also, tell me if you're running onSolaris.
Joe

Installation fails with "internal error 2502"

I have a client running Windows Vista Home Premium Edition (32 bit) and my app's CVI-built installer fails with "Internal Error 2502".
This installation kit has been successfully deployed on hundreds of computers with various versions of Windows and I have never seen this one. No device drivers or advanced libraries - just the standard runtime. I use CVI 9.0.1.
Searches reveal very little - some old issues with Office installation, date/time settings etc. but I have yet to find anything that indicates what this error represents.
Any insights or ideas very welcome.
Thanks,
Ian
Solved!
Go to Solution.

That appears to be a Windows Installer (MSI) error, and can have many different causes. Can you confirm that anyWindows installers (perhaps try newest Adobe Reader) work on that system? Is the system's date/time set correctly? Could there be a permissions restriction with C:\Windows\system32 or C:\Programs\National Instruments\Shared?
I'd also try doing an internet search for "installer error 2502" and see what other tips you might find. If all else fails, try running the installer from the command line like this:
setup.exe /log install_log.txt
That will generate a log file that might contain a hint for us.
Mert A.
National Instruments

Installation failed with error code 1603

Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
Naveed

I have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done

All scheduled jobs started suddenly to fail with ORA-01031: insufficient pr

I have a setup of gridcontrol 11g on windows 2008. I've been running successful for weeks until the other day when all my scheduled jobs started to fail with
ORA-01031: insufficient privileges (rman jobs)
ERROR: Invalid username and/or password (sql scripts).
I verified for the accounts being locked, pw correct, expired / grace period, etc.
all good when I try from the command line. running an rman backup from the command line works great, but the same one through the job scheduler fails with ORA-01031.
I've dropped the jobs completely, recreated them again. same thing.
I'm using preferred credentials and dropped and recreated them. same thing.
I don't know where else to look. Only grid control scheduled jobs fail, but all of them do.
I'm using SQLNET.AUTHENTICATION_SERVICES= (NTS) in my sql.ne (always have).
we use a windows domain server / domain authentication for logging into boxes. I haven't changed any of my passwords.
I am probably looking in the wrong places. Anybody able to help?

Hi,
ERROR: Invalid username and/or password (sql scripts).This error message clearly tells that password is incorrect and "insufficient privileges" shows that perhaps you are using SYS user for running the jobs and password for user SYS is incorrect.
If you are specifying passwords in your scripts, i don't think you need to set preferred credentials.
Try following
1) Remove preferred credentials
2) Don't check password of user sys by locally logging in (because if Os authentication is on, even wrong password will allow you loging into the database and you will think that password is correct). Try connecting database using SYS user from a remote machine and check whether it accepts your password and make sure you have same password for your jobs and in sql scripts
3) If still problem, just for test, remove SQLNET.AUTHENTICATION_SERVICES= (NTS) and try
Salman

Financial Statement Generators fail with ORA-01722

We upgaded from 11.5.10.2 to R12.1.3. Since then we have FGSs fail with ora-01722

*+<Moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>+*
Please refer:
R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS – ORA-01403: No Data Found Common Issues [ID 1368691.1]
R12: RGRARG FSG Completes with Error, rgrsap.rgrsxp: ORA-01722: Invalid Number [ID 579655.1]

Adcfgclone fails with ORA-04063: view "SYS.DBA_NETWORK_ACLS" error

Hi all,
While running adcfgclone on dbtier if fails with following error
ORA-04063: view "SYS.DBA_NETWORK_ACLS" error
here is the scene:
we are trying to clone a production instance for doing some patching
while running adcfgclone on target (test instance) it fails
our current environment is
application:R12.1.3
db:11.1.0.7
os: rhel 5.6
here is output from
autoconfig file:
SQLPLUS Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Apr 18 09:28:32 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
PL/SQL procedure successfully completed.
Commit complete.
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
adcrobj.sh exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 2 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/addbperms.sh
script returned:
addbperms.sh started at Thu Apr 18 09:28:32 IST 2013
The environment settings are as follows ...
ORACLE_HOME : /u02/testoba/db/tech_st/11.1.0
ORACLE_SID : TESTOBA
TWO_TASK :
PATH : /u02/testoba/db/tech_st/11.1.0/perl/bin:/u02/testoba/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/testoba/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
Library Path : /u02/testoba/db/tech_st/11.1.0/lib:/usr/X11R6/lib:/usr/openwin/lib:/u02/testoba/db/tech_st/11.1.0/lib:/usr/dt/lib:/u02/testoba/db/tech_st/11.1.0/ctx/lib
SQLPLUS Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
     Changing permissions for file sqlplus.
     Changing permissions for file extproc.
     Changing permissions for file tkprof.
addbperms.sh exiting with status 0
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 3 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/perl/bin/perl -I /u02/testoba/db/tech_st/11.1.0/perl/lib/5.8.3 -I /u02/testoba/db/tech_st/11.1.0/perl/lib/site_perl/5.8.3 -I /u02/testoba/db/tech_st/11.1.0/appsutil/perl /u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/txkConfigDbOcm.pl
script returned:
Configuring OCM on the Database Tier....
Testing database connection...
Database connection test passed.
Response file /u02/testoba/db/tech_st/11.1.0/appsutil/clone/adclnocm.res required to configure OCM does not exists
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
AutoConfig Services Phase
Running Service Process 4 of 4 for AppsUtil
Executing script in InstantiateFile:
/u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv/txkcreateACL.sh
script returned:
You are running txkcreateACL.sh version 120.1
The environment settings are as follows ...
ORACLE_HOME : /u02/testoba/db/tech_st/11.1.0
ORACLE_SID : TESTOBA
PATH : /u02/testoba/db/tech_st/11.1.0/perl/bin:/u02/testoba/db/tech_st/11.1.0/bin:/usr/bin:/usr/sbin:/u02/testoba/db/tech_st/11.1.0/appsutil/jre/bin:/bin:/usr/bin/X11:/usr/local/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/u02/testoba/db/tech_st/11.1.0/appsutil/clone/bin/../jre/bin:/usr/lib64/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/home/oratest/bin:.
Executable : /u02/testoba/db/tech_st/11.1.0/bin/sqlplus
Executing txkcreateACL.sql ...
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Apr 18 09:28:33 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected.
FROM DBA_NETWORK_ACLS
ERROR at line 17:
ORA-06550: line 17, column 8:
PL/SQL: ORA-04063: view "SYS.DBA_NETWORK_ACLS" has errors
ORA-06550: line 16, column 3:
PL/SQL: SQL Statement ignored
Disconnected from Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
txkcreateACL.sh: exiting with status 1
.end std out.
.end err out.
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u02/testoba/db/tech_st/11.1.0/appsutil/install/TESTOBA_testsrv
txkcreateACL.sh INSTE8_APPLY 1
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDatabase
StackTrace:
java.lang.Exception: RC-50014: Fatal: Execution of AutoConfig was failed
     at oracle.apps.ad.clone.ApplyDatabase.checkAutoConfigErr(ApplyDatabase.java:3192)
     at oracle.apps.ad.clone.ApplyDatabase.runCVMAndAutoConfig(ApplyDatabase.java:3010)
     at oracle.apps.ad.clone.ApplyDatabase.doConf(ApplyDatabase.java:649)
     at oracle.apps.ad.clone.ApplyDatabase.doApply(ApplyDatabase.java:473)
     at oracle.apps.ad.clone.ApplyDatabase.<init>(ApplyDatabase.java:366)
     at oracle.apps.ad.clone.ApplyDBTier.<init>(ApplyDBTier.java:110)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at oracle.apps.ad.clone.util.CloneProcessor.run(CloneProcessor.java:67)
     at java.lang.Thread.run(Unknown Source)
please provide any suitable link or doc id or any workaround
thanks
Zavi

Hi;
Please review:
Adautocfg.Sh Fails With "ORA-01422: " While Executing Txkcreateacl.sh [ID 854746.1]
Database Cloning Failed With txkcreateACL.sh[36]: sqlplus [ID 603297.1]
R12 : Autoconfig script txkcreateACL.sh fails with error ORA-31003: Parent /sys/acls/ already contains child entry OracleEBS.xml [ID 1328458.1]
Regard
Helios

EXPDP fails with ORA-39125: Worker unexpected fatal error in KUPW $

Hi Friends,
Oracle 10.2.0.4.0 on Sun OS
Im trying to do metadata_only export using EXPDP
Facing the below error
ORA-39125: Worker unexpected fatal error in KUPW $ WORKER.UNLOAD_METADATA while calling DBMS_METADATA.FETCH_XML_CLOB []
ORA-31642: The following SQL statement fails:
BEGIN "SYS". "DBMS_RULE_EXP_RULES." SCHEMA_CALLOUT (1,1,1, '10 .02.00.04.00 ') END;
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_METADATA", line 907
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW $ WORKER", line 6307
PL / SQL Call Stack
object line object
handle number name
51bf5dc20 15032 package body SYS.KUPW $ WORKER
51bf5dc20 6372 package body SYS.KUPW $ WORKER
51bf5dc20 2396 package body SYS.KUPW $ WORKER
51bf5dc20 6944 package body SYS.KUPW $ WORKER
51bf5dc20 1314 package body SYS.KUPW $ WORKER
51c7e8650 2 anonymous block
====================================
Findings:
I check the status of DBMS_RULE_EXP_RULES
OWNER OBJECT_NAME OBJECT_TYPE STATUS
SYS DBMS_RULE_EXP_RULES PACKAGE BODY VALID
SYS DBMS_RULE_EXP_RULES PACKAGE VALID
PUBLIC DBMS_RULE_EXP_RULES SYNONYM VALID
DBMS_METADATA & DBMS_SYS_ERROR packages are valid.
======================================================
Error in the alert:
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=25, OS id=6506
to execute - SYS.KUPM$MCP.MAIN('SYS_EXPORT_SCHEMA_01', 'SYS', 'KUPC$C_1_20120908075037', 'KUPC$S_1_20120908075037', 0);
kupprdp: worker process DW01 started with worker id=1, pid=26, OS id=6633
to execute - SYS.KUPW$WORKER.MAIN('SYS_EXPORT_SCHEMA_01', 'SYS');
when i check the trace file, find the below error
ORA-04063: package body "SCH.COLLECTION" has errors
But when I check the status of the package, it's valid.
Thanks for your help
KSG

Hi;
Is it full exp? Of yes please review:
DataPump Export Fails With Errors ORA-39125 ORA-31642 ORA-1422 [ID 790988.1]
Full And Schema DataPump Exports Fail With Errors ORA-39125 ORA-31642 During DBMS_SCHED_EXPORT_CALLOUTS.SCHEMA_CALLOUT [ID 1109045.1]
EXPDP FAILS WITH ORA-39125 ORA-31642 DBMS_SCHED_EXPORT_CALLOUTS [ID 445291.1]
Full Database DataPump Export (EXPDP) Fails With Errors ORA-39125 ORA-4045 ORA-1031 On XDB.XDB_PI_TRIG [ID 1102434.1]
Errors ORA-39125 ORA-1801 When Running DataPump Export (EXPDP) [ID 815683.1]
Regard
Helios

CSSCAN for database character set conversion failing with ORA-01578

Hi ,
CSSCAN for database character set conversion failing with ORA-01578: ORACLE data block corrupted (file # 84, block # 23930). please help me out in this regard.
Thanks,
Sravan.

Hi Anand,
Thanks for your update. The segment is a table not an index in my case. And i got this error while running CSSCAN on Apps database for character set conversion to UTF8 from WE8ISO8859P1. Please find the snapshot below for your reference.
SQL> select segment_name, segment_type, owner from dba_extents where file_id = 84 and 23930 between block_id and block_id + blocks - 1;
SEGMENT_NAME
SEGMENT_TYPE OWNER
EDW_LOOKUP_M
TABLE POA
SQL> ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE;
ANALYZE TABLE POA.EDW_LOOKUP_M VALIDATE STRUCTURE CASCADE
ERROR at line 1:
ORA-01578: ORACLE data block corrupted (file # 84, block # 23930)
ORA-01110: data file 84: '/d911/oracle/dbcondata/poad01.dbf'
Thanks,
Sravan.

Windows 2003 R2 installation failing with ORA-12154

Similar Messages

Maybe you are looking for