Windows 2003 server and SQL 2008
Hi
Does SAP Business one support windows 2008 and sql 2008 platforms?
When i checked the partner portal it says that these platforms are not supported.Is there any update?
Regards
Louis
Hello Louis,
The only way to determine this is via the supported platforms page in the portal. This is the most up to date, and will include information for the future when this data is available. So for not I would only plan with what information is available.
Regards,
Paul Finneran
SAP Business One Forums Team
Similar Messages
-
XServe running MS Windows 2003 server + MS SQL 2005
I am planning to deploy 3 XServes,
One running Windows 2003 Server + MS SQL 2005
the other 2 runnung Windows 2003 Server + MS Terminal Server
Wonder if there's anyone can share the experience for the above configuration?
Rgds,
chiacyDigging around Macbytes.com, I came across this article:
http://weblog.infoworld.com/enterprisemac/archives/2006/12/killtwowindow.html
To quote:
"I have tested, and continue to run in a production setting, two instances of Windows 2003 Server hosted by Parallels Desktop, running on OS X Server 10.4.8 on a 3 GHz Xserve. To skip to the punch line, it works, and it's as fast as all get-out."
HTH
Xserve Dual 2.3 GHz Mac OS X (10.3.9) -
Windows 2003 Server and BISE1: a painful way
Hi Forum !!
I consider my self as an advantage one in BISE1 matters. I've installed BISE1 many times on systems running Windows XP SP2 for proof concepts and as a lab environment for production systems setups. Following procedures "by the book" all BISE1 environments were work fine, and all issues are covered by the documentation.
But problems appear when we find Windows 2003 Server based systems. Even following step by step the installation process, we find different kind of problems. Thanks to metalink notes we could fix some, but there are others very strange at all.
For example, In a lab environment, running WinXP we successfully applied Database Patch P5337014 moving database version from release 10.2.0.1 to 10.2.0.3. Then we applied in the same lab environment Warehouse Builder Patch P6264457, moving OWB Repository version to 10.2.0.3.0 and OWB client to 10.2.0.3.33. Later, over a Production environment running Win 2003 Server, we follow the same procedure getting catastrophic results. When we applied the database Patch P5337014, database contro console service fails over and over again sending to the web browser a connection refused message. After a new installation, when we tried to apply the OWB Patch, the Control Center service doesn't work anymore, and none of the metalink notes we found appears to fix the problem.
It is just me or is anyone else who have faced this kind of problems with Windows 2003 Server ? What kind of workaround exists to solve this problems ?
Thanks, and your comments are welcome.Hopefully you can help me too. My company just purchased a MAC BookPro and we all pc based with a PC Windows server. I have been trying to get this MAC to connect to the server. We need it to be able to access files and folder on the PC server to save and retrieve pc files.
I finally I it to where to do the GO > Connect to Server > Type in info > it brings up authentication information, we type in the domain and user name and password > but then I get an error saying the user name and password are not found.
Apple support told me it's now on the pc server side. I know the user name and password are correct. We have installed the Mac components on the server. I don't know if there are some other conflicts with the server or what to do.
Please let me know if you know of anything else I can try. -
Hi
We have a powerbook G4 running 10.4.6
And we want to use it on a windows 2003 server network.
How is this done?
i.e server end and mac end.
Mac OS X (10.4.6) 1 GB of ramHopefully you can help me too. My company just purchased a MAC BookPro and we all pc based with a PC Windows server. I have been trying to get this MAC to connect to the server. We need it to be able to access files and folder on the PC server to save and retrieve pc files.
I finally I it to where to do the GO > Connect to Server > Type in info > it brings up authentication information, we type in the domain and user name and password > but then I get an error saying the user name and password are not found.
Apple support told me it's now on the pc server side. I know the user name and password are correct. We have installed the Mac components on the server. I don't know if there are some other conflicts with the server or what to do.
Please let me know if you know of anything else I can try. -
Big problems with Windows 2003 Server and FX5900
Getting repeated lockups using MSI FX5900XT and Windows 2003 Standard Server. Mouse stops responding and system occassionally locks up completely. I have a dual boot system and windows XP works fine. Windows 2003 works fine if I use the standard VGA driver (I use 1600x1200 16bit 75 Hz resolution and refresh).
The event log usually says:
Event Log
Event Type: Error
Event Source: nv
Event Category: None
Event ID: 108
Date: 18/07/2004
Time: 13:28:25
User: N/A
Computer: HOME
Description:
The driver nv4_disp for the display device \Device\Video0 got stuck in an infinite loop. This usually indicates a
problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your
hardware device vendor for any driver updates.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Presently using the latest drivers
Any ideas
Thanks
WillIRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 12 PS/2 Compatible Mouse OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 16 Creative SB Audigy OK
IRQ 16 NEC PCI to USB Open Host Controller OK
IRQ 17 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 17 NEC PCI to USB Open Host Controller OK
IRQ 18 NEC PCI to USB Enhanced Host Controller (B1) OK
IRQ 19 MSI MS-StarForce GeForce FX 5900XT (NVIDIA GeForce FX 5900XT) OK
IRQ 20 Standard OpenHCD USB Host Controller OK
IRQ 20 NVIDIA nForce MCP Networking Controller OK
IRQ 21 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard Enhanced PCI to USB Host Controller OK
IRQ 22 OHCI Compliant IEEE 1394 Host Controller OK -
Windows 2003 server and running admin app
Hi.
I am using windows server 2003 R2.
I installed weblogic 8.1 with a patch
when I try to run the admin console, only the right side functions after
login, the left side is malfunctioning. It seems to be related to an activeX
control that the page attempts to install.
I tell it to go ahead and install, however it never does nor does it throw a
visible error.
Can anyone point out what the problem solution is?
In the meantime, it is a web app, so I can run it from another machine.
thanksYes.
-
Windows 2003 server and application server 8.2
I trying to install application server 8.2 and the installation stop and says me this:
INFO - archivo jar descomprimido: activation.jar.pack
INFO - archivo jar descomprimido: appserv-assemblytool.jar.pack
INFO - archivo jar descomprimido: appserv-cmp.jar.pack
INFO - archivo jar descomprimido: appserv-ext.jar.pack
INFO - archivo jar descomprimido: appserv-jstl.jar.pack
INFO - archivo jar descomprimido: appserv-rt1.jar.pack
INFO - archivo jar descomprimido: appserv-rt2.jar.pack
INFO - archivo jar descomprimido: appserv-rt3.jar.pack
INFO - archivo jar descomprimido: appserv-rt4.jar.pack
INFO - archivo jar descomprimido: appserv-tags.jar.pack
INFO - archivo jar descomprimido: commons-launcher.jar.pack
INFO - archivo jar descomprimido: commons-logging.jar.pack
INFO - archivo jar descomprimido: deployhelp.jar.pack
INFO - archivo jar descomprimido: j2ee-svc.jar.pack
INFO - archivo jar descomprimido: j2ee.jar.pack
INFO - archivo jar descomprimido: jaxr-api.jar.pack
INFO - archivo jar descomprimido: jaxr-impl.jar.pack
INFO - archivo jar descomprimido: jaxrpc-api.jar.pack
INFO - archivo jar descomprimido: jaxrpc-impl.jar.pack
INFO - archivo jar descomprimido: jsf-api.jar.pack
INFO - archivo jar descomprimido: jsf-impl.jar.pack
INFO - archivo jar descomprimido: mail.jar.pack
INFO - archivo jar descomprimido: relaxngDatatype.jar.pack
INFO - archivo jar descomprimido: saaj-api.jar.pack
INFO - archivo jar descomprimido: saaj-impl.jar.pack
INFO - archivo jar descomprimido: sun-appserv-ant.jar.pack
INFO - archivo jar descomprimido: xsdlib.jar.pack
INFO - archivo jar descomprimido: sun-as-jsr88-dm.jar.pack
INFO - n?mero de entradas jar fusionadas: 2741
INFO - n?mero de entradas jar fusionadas: 1430
INFO - n?mero de entradas jar fusionadas: 2473
INFO - n?mero de entradas jar fusionadas: 776
INFO - n?mero de entradas jar fusionadas: 646
INFO - Iniciar la configuraci?n del servidor principal.
ERROR - la creaci?n predeterminada de dominios devolvi? la siguiente excepci?n: abnormal subprocess termination: Detailed Message:"?" no se reconoce como un comando interno o externo,
programa o archivo por lotes ejecutable.
any idea?
thanksapplication server 8.2
http://java.sun.com/j2ee/1.4/download.html
thanks for your help
If you want send me a mail, or talk with messenger or
likeI would in that case try to contact Sun. The error message seems a bit odd. The installation is trying to execute some command, tool or applications which can't be found by the OS. The error indicates that that command has a very odd name.
Kaj -
Oracle 10g Universe Connectivity From 64bit Windows 2003 Server
Hi,
Have an existing BO XI 3.1 environment built on a 64 bit Windows 2003 server and
I'm having problems getting it to communicate with Oracle 10g universes. Works fine
with its SQL Server 2005 repository and SQL Server 2005 relational/olap universes, but
cant seem to get it to work with Oracle.
Universes work fine on the 32 bit development environment talking to the same Oracle
database, but when move them to 64 bit testing environment they all fail with
Oracle ora-12154 errors.
32 bit Oracle client is installed and can communicate fine with other products using ODBC
connections from the server - but BO refuses to communicate.
Any ideas other than reinstalling BO under 'Program Files' rather than 'Program Files (x86)'
as I've seen some references on the web about this possibly being a problem?
Thanks.Hi,
Oracle 32 bit and 64 bit connectivity work fine from the server. The problem seems to
relate to bug 3807408 in Oracle 10g that cant handle parentheses in directory names.
So BO being installed in u2018C:\Program Files (x86)\Business Objectsu2019 causes it to get
rather annoyed.
SAP Note 1202730 does cover this, but our DBA's aren't too keen on installing the
suggested patch. I'm also not very keen on reinstalling BO in a different directory as
we've got working production sites that would have to be rebuilt.
So now investigating whether using the Oracle 11g client will resolve this.
MSDN forum topic http://social.msdn.microsoft.com/forums/en-US/sqlintegrationservices/thread/ab662d63-6385-4f73-b27f-d526048f601f/ gives a pretty good overview of what people have been trying to resolve this. -
Connecting to a Windows 2003-Server with a MacBook
Hi guys!
I'm planning on buying a MacBook anytime soon. The main purpose of this investment is work at school. Therefore I have to ensure that everything works perfectly, otherwise I would have to buy a Windows notebook (in fact not the kind of decision I wanna make).
We have a Windows 2003-Server and every other pupil can easily connect to this server with a Windows XP machine wirelessly. They can use printers, surf the Internet and use all the network harddrives (like F: for everyone; P: for projects were only certain groups have access to certain folders; and Z: your home-directory where only the very user has access).
I need to make sure 2 things:
a) When I connect to the network via Airport, does the system ask me for my account, so I can have (or have not) access to files I am entitled to?
b) Does everything work fine under normal condition?
I am aware that something could happen nobody could have forseen, but as the MacBook is a bigger investment than a € 700 windows crapbook, I would like to make sure that everything should work seemlessly.Thanks Jay, It now auto log's in but it's still not acting like a networked drive - when saving an attachment etc I still can't save direct to the server as it doesn't appear in the listing.. I need to save to desktop or doc's then manually drag it into the server... this is a pain...
Any further ideas. -
Problems with Windows 2003, JRun and Java 1.4.2_07
Hi!
I have installed JRun 4 with J2SE 1.4.2_07 on a Windows 2003 Server and all goes well until someone install a system patch, Office. After that JRun doesn�t star. The logs says:
Starting Macromedia JRun 4 (Build 84683), admin server
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x77F46A07
Function=RtlFreeHeap+0x322
Library=C:\WINDOWS\system32\ntdll.dll
Current Java thread:
at java.util.zip.ZipFile.getEntry(Native Method)
at java.util.zip.ZipFile.getEntry(ZipFile.java:146)
- locked <0x10a83218> (a java.util.jar.JarFile)
at java.util.jar.JarFile.getEntry(JarFile.java:194)
at java.util.jar.JarFile.getJarEntry(JarFile.java:181)
at sun.misc.URLClassPath$JarLoader.getResource(URLClassPath.java:671)
at sun.misc.URLClassPath.getResource(URLClassPath.java:160)
at java.net.URLClassLoader$1.run(URLClassLoader.java:191)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
- locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
- locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
- locked <0x10a63608> (a sun.misc.Launcher$AppClassLoader)
at java.lang.Class.getDeclaredConstructors0(Native Method)
at java.lang.Class.privateGetDeclaredConstructors(Class.java:1618)
at java.lang.Class.getConstructor0(Class.java:1930)
at java.lang.Class.getConstructor(Class.java:1027)
at com.sun.management.jmx.MetaData.findConstructor(MetaData.java:256)
at com.sun.management.jmx.MBeanServerImpl.internal_instantiate(MBeanServerImpl.java:2111)
at com.sun.management.jmx.MBeanServerImpl.instantiate(MBeanServerImpl.java:152)
at jrunx.kernel.ConfigurableServicePartition.loadAndInit(ConfigurableServicePartition.java:127)
at jrunx.kernel.ConfigurableServicePartition.loadChildren(ConfigurableServicePartition.java:89)
at jrunx.kernel.ConfigurableServicePartition.setChildElements(ConfigurableServicePartition.java:60)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1628)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at jrunx.kernel.ServiceAdapter.invokeMethod(ServiceAdapter.java:705)
at jrunx.kernel.JRunServiceDeployer.loadMBeans(JRunServiceDeployer.java:179)
at jrunx.kernel.JRunServiceDeployer.deployServices(JRunServiceDeployer.java:85)
at jrunx.kernel.DeploymentService.loadServices(DeploymentService.java:46)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1628)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at jrunx.kernel.JRun.startServer(JRun.java:575)
at jrunx.kernel.JRun.<init>(JRun.java:493)
at jrunx.kernel.JRun$1.run(JRun.java:346)
at java.security.AccessController.doPrivileged(Native Method)
at jrunx.kernel.JRun.start(JRun.java:343)
at jrunx.kernel.JRun.startByNTService(JRun.java:427)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at jrunx.kernel.JRun.invoke(JRun.java:180)
at jrunx.kernel.JRun.main(JRun.java:168)
Dynamic libraries:
0x00400000 - 0x00410000 C:\JRun4\bin\jrun.exe
0x77F40000 - 0x77FFA000 C:\WINDOWS\system32\ntdll.dll
0x77E40000 - 0x77F34000 C:\WINDOWS\system32\kernel32.dll
0x77DA0000 - 0x77E30000 C:\WINDOWS\system32\ADVAPI32.dll
0x77C50000 - 0x77CF5000 C:\WINDOWS\system32\RPCRT4.dll
0x77BA0000 - 0x77BF4000 C:\WINDOWS\system32\MSVCRT.dll
0x08000000 - 0x08138000 C:\Java\j2sdk1.4.2_07\jre\bin\client\jvm.dll
0x77D00000 - 0x77D8F000 C:\WINDOWS\system32\USER32.dll
0x77C00000 - 0x77C44000 C:\WINDOWS\system32\GDI32.dll
0x76AA0000 - 0x76ACC000 C:\WINDOWS\system32\WINMM.dll
0x10000000 - 0x10007000 C:\Java\j2sdk1.4.2_07\jre\bin\hpi.dll
0x76F50000 - 0x76F63000 C:\WINDOWS\system32\Secur32.dll
0x003F0000 - 0x003FE000 C:\Java\j2sdk1.4.2_07\jre\bin\verify.dll
0x005F0000 - 0x00609000 C:\Java\j2sdk1.4.2_07\jre\bin\java.dll
0x00610000 - 0x0061D000 C:\Java\j2sdk1.4.2_07\jre\bin\zip.dll
0x006E0000 - 0x006EF000 C:\Java\j2sdk1.4.2_07\jre\bin\net.dll
0x71C00000 - 0x71C18000 C:\WINDOWS\system32\WS2_32.dll
0x71BF0000 - 0x71BF8000 C:\WINDOWS\system32\WS2HELP.dll
0x71B20000 - 0x71B63000 C:\WINDOWS\System32\mswsock.dll
0x76ED0000 - 0x76EF7000 C:\WINDOWS\system32\DNSAPI.dll
0x76F70000 - 0x76F77000 C:\WINDOWS\System32\winrnr.dll
0x76F10000 - 0x76F3F000 C:\WINDOWS\system32\WLDAP32.dll
0x76F80000 - 0x76F85000 C:\WINDOWS\system32\rasadhlp.dll
0x03230000 - 0x0323C000 C:\JRun4\bin\portscan.dll
0x71AE0000 - 0x71AE8000 C:\WINDOWS\System32\wshtcpip.dll
0x76C10000 - 0x76C38000 C:\WINDOWS\system32\imagehlp.dll
0x6D580000 - 0x6D621000 C:\WINDOWS\system32\dbghelp.dll
0x77B90000 - 0x77B98000 C:\WINDOWS\system32\VERSION.dll
0x76B70000 - 0x76B7B000 C:\WINDOWS\system32\PSAPI.DLL
Heap at VM Abort:
Heap
def new generation total 2304K, used 1312K [0x10010000, 0x10280000, 0x109e0000)
eden space 2112K, 56% used [0x10010000, 0x1013a8d0, 0x10220000)
from space 192K, 61% used [0x10250000, 0x1026d958, 0x10280000)
to space 192K, 0% used [0x10220000, 0x10220000, 0x10250000)
tenured generation total 30272K, used 1139K [0x109e0000, 0x12770000, 0x18010000)
the space 30272K, 3% used [0x109e0000, 0x10afce80, 0x10afd000, 0x12770000)
compacting perm gen total 4864K, used 4680K [0x18010000, 0x184d0000, 0x1c010000)
the space 4864K, 96% used [0x18010000, 0x184a2348, 0x184a2400, 0x184d0000)
Local Time = Wed Feb 09 10:43:31 2005
Elapsed Time = 3
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_07-b05 mixed mode)
# An error report file has been saved as hs_err_pid1712.log.
# Please refer to the file for further information.
Can someone help me. Thanx and sorry about my english.
ManuIt crashed 3 seconds after it is running. Should be reading some jar file.
Could be a something corrupted a zip file or something. Can you still do a java -version? You may want to try reinstalling 1.4.2_07 -
Just-In-Time (JIT) Error in Windows 2003 Server Environment
Hi,
I am using the EBS R12.1.1 environment for learning purpose. I am running EBS R12.1.1 on Windows 2003 Server environment on my personal laptop.
I am getting JIT error on FNDLIBR.exe file. This error opens a window and asks me to choose debuggers and by default the MS Visual Studio 2005 debugger is available. This error raises every some time randomly like some time it raises in every 1 min, sometime it raises in every 2 to 5 mins etc. How can I overcome on this error?
Thanks & Regards,
Waqas HassanThanks Mr. Hussein,
I think in learning process i do not need the NLS Patch. So I had a fresh copy of EBS R12.1.1 in VMWare on Windows 2003 Server and now, I am using it without NLS Patch.
Actually I am working on HRMS Setup, in fresh EBS environment there is need to install its legislative data, so I installed it and apply the hrglobal.drv patch according to this document "*Instructions for Running DataInstall/hrglobal.drv on R12 [ID 414434.1]*" but I just skipped only 5th and 6th Step because its about NLS Patch.
I run the 7th step to "*Generate Payroll Dynamic Database Item Translations*" its completed successfully but when I run the 8th Step about "*Bulk Compile Formulas*" its giving error and the error is given below:
FastFormula: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
BULKCOMPILE module: Bulk Compile Formulas
Current system time is 15-APR-2012 00:51:16
Starting verify: 109 formula instances to process.
Accrual:PTO_HD_ANNIVERSARY_BALANCE:0001/01/01 verified OK
Accrual:PTO_PAYROLL_BALANCE_CALCULATION:0001/01/01 verified OK
Accrual:PTO_PAYROLL_CALCULATION:0001/01/01 verified OK
Accrual:PTO_ROLLING_ACCRUAL:0001/01/01 verified OK
Accrual:PTO_SIMPLE_BALANCE_MULTIPLIER:0001/01/01 verified OK
Accrual:PTO_SIMPLE_MULTIPLIER:0001/01/01 verified OK
Accrual Carryover:PTO_HD_ANNIVERSARY_CARRYOVER:0001/01/01 verified OK
Accrual Carryover:PTO_PAYROLL_CARRYOVER:0001/01/01 verified OK
Accrual Carryover:PTO_ROLLING_CARRYOVER:0001/01/01 verified OK
Accrual Carryover:PTO_SIMPLE_CARRYOVER:0001/01/01 verified OK
Accrual Ineligibility:PTO_INELIGIBILITY_CALCULATION:0001/01/01 verified OK
Accrual Subformula:PTO_HD_ANNIVERSARY_PERIOD_ACCRUAL:0001/01/01 verified OK
Accrual Subformula:PTO_PAYROLL_PERIOD_ACCRUAL:0001/01/01 verified OK
Accrual Subformula:PTO_ROLLING_PERIOD_ACCRUAL:0001/01/01 verified OK
Accrual Subformula:PTO_SIMPLE_PERIOD_ACCRUAL:0001/01/01 verified OK
Appraisal Competency Line Scoring:PERF_X_PROF:0001/01/01 verified OK
Appraisal Competency Line Scoring:PERF_X_WEIGHTING:0001/01/01 verified OK
Appraisal Competency Line Scoring:PROF_X_WEIGHTING:0001/01/01 verified OK
Appraisal Objective Line Scoring:PERF:0001/01/01 verified OK
Appraisal Objective Line Scoring:PERF_X_WEIGHTING:0001/01/01 verified OK
Appraisal Total Scoring:AVG_COMP_AND_OBJ:0001/01/01 verified OK
Appraisal Total Scoring:SUM_COMP_AND_OBJ:0001/01/01 verified OK
CAGR:HR_CAGR_PYS_TEMPLATE:1951/01/01 verified OK
CAGR:HR_CAGR_TEMPLATE:1951/01/01 verified OK
Element Skip:SA_ONCE_EACH_PERIOD:0001/01/01 verified OK
APP-FF-34004: Element Skip:SA_ONCE_EACH_YEAR:0001/01/01 FAILED
APP-FF-33005: The local variable GOSI_REFERENCE_EARNINGS_ASG_YTD was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Element Skip:PTO_ORACLE_SKIP_RULE:0001/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_CONSOL_SET:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_ELEMENT_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_ELEMENT_SET:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_EXTRACT_ENDDT:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_EXTRACT_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_EXTRACT_STARTDT:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_LOCATION:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_ORG_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_PAYROLL_NAME:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_PERSON_TYPE:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_REPORT_OPTION:1900/01/01 verified OK
Extract Header/Trailer Data Element:PAY_GLOBAL_PEXT_SELECTION_CRITERIA:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_CHK_ASG_ACTIONS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_FID_EMP_STATUS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_ACTUAL_SALARY:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_ANN_COMP:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_BAL_VAL:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_DDF_DF_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_ELE_ETRY_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_EMP_CATEGORY:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_EMP_STATUS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_NORMAL_HOURS:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_PAY_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_PLAN_CONTR_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_SIT_VALUE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_GET_TERMI_DATE:1900/01/01 verified OK
Extract Person Data Element:PAY_GLOBAL_PEXT_PAYROLL_DATE:1900/01/01 verified OK
Extract Person Inclusion:PAY_GLOBAL_PEXT_CRITERIA_FP:1900/01/01 verified OK
Extract Post Process:PAY_GLOBAL_PEXT_POST_PROCESS:1900/01/01 verified OK
Net to Gross:DEFAULT_GROSSUP:0001/01/01 verified OK
OTL Approvals:HXC_OVERRIDE_APPROVER_WF_PERSON:0001/01/01 verified OK
OTL Time Entry Rules:HXC_ASG_STD_HRS_COMPARISON:0001/01/01 verified OK
OTL Time Entry Rules:HXC_APPROVAL_ASG_STATUS:0001/01/01 verified OK
OTL Time Entry Rules:HXC_APPROVAL_MAXIMUM:0001/01/01 verified OK
OTL Time Entry Rules:HXC_CLA_CHANGE_FORMULA:1901/01/01 verified OK
OTL Time Entry Rules:HXC_CLA_LATE_FORMULA:1901/01/01 verified OK
OTL Time Entry Rules:HXC_ELP:0001/01/01 verified OK
OTL Time Entry Rules:HXC_FIELD_COMBO_EXCLUSIVE:0001/01/01 verified OK
OTL Time Entry Rules:HXC_FIELD_COMBO_INCLUSIVE:0001/01/01 verified OK
OTL Time Entry Rules:HXC_PERIOD_MAXIMUM:0001/01/01 verified OK
OTL Time Entry Rules:HXC_PTO_ACCRUAL_COMPARISON:0001/01/01 verified OK
OTL Time Entry Rules:HXC_TIME_CATEGORY_COMPARISON:0001/01/01 verified OK
Oracle Payroll:NI_VALIDATION:0001/01/01 verified OK
APP-FF-34004: Oracle Payroll:SA_GOSI_CALCULATION:0001/01/01 FAILED
APP-FF-33005: The local variable GOSI_REFERENCE_EARNINGS_ASG_YTD was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: Oracle Payroll:SA_GOSI_CALCULATION:2006/01/01 FAILED
APP-FF-33005: The local variable GOSI_REFERENCE_EARNINGS_ASG_YTD was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Oracle Payroll:US_EVS:0001/01/01 verified OK
Oracle Payroll:CALC_GROSSUP_PAY_VALUE:0001/01/01 verified OK
Oracle Payroll:HR_CWK_MOVE_TYPE_TEMPLATE:0001/01/01 verified OK
Oracle Payroll:HR_MOVE_TYPE_TEMPLATE:0001/01/01 verified OK
Oracle Payroll:HR_PERSON_TYPE_TEMPLATE:0001/01/01 verified OK
Oracle Payroll:PTO_TAGGING_FORMULA:0001/01/01 verified OK
Payment:SA_EFT_BODY:0001/01/01 verified OK
APP-FF-34004: Payment:SA_EFT_BODY_CUSTOMER:0001/01/01 FAILED
APP-FF-33005: The local variable ORG_SA_BANK_NAME was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Payment:SA_EFT_FOOTER:0001/01/01 verified OK
APP-FF-34004: Payment:SA_EFT_FOOTER_CUSTOMER:0001/01/01 FAILED
APP-FF-33005: The local variable ORG_SA_ACCOUNT_NUMBER was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Payment:SA_EFT_HEADER:0001/01/01 verified OK
APP-FF-34004: Payment:SA_EFT_HEADER_CUSTOMER:0001/01/01 FAILED
APP-FF-33005: The local variable ORG_SA_ACCOUNT_NUMBER was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
Payroll Run Proration:SA_USER_PRORATION_FORMULA:0001/01/01 verified OK
People Management Message:US_EMPLOYEE_TRANSFER:0001/01/01 verified OK
People Management Message:US_NEW_STARTER:0001/01/01 verified OK
People Management Message:US_PAYROLL_INT_HIRE:0001/01/01 verified OK
People Management Message:US_PAYROLL_NEW_STARTER:0001/01/01 verified OK
People Management Message:US_RELOCATION_NOTIFICATION:0001/01/01 verified OK
People Management Message:QH_ASSIGNMENT_NAME:0001/01/01 verified OK
Promotion:PROMOTION_TEMPLATE:0001/01/01 verified OK
APP-FF-34004: QuickPaint:US_EMPLOYEE_TRANSFER:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_NEW_STARTER:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_PAYROLL_INT_HIRE:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_PAYROLL_NEW_STARTER:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
APP-FF-34004: QuickPaint:US_RELOCATION_NOTIFICATION:1000/01/01 FAILED
APP-FF-33005: The local variable SCL_ASG_US_TAX_UNIT was used before being initialized
Cause: The variable named in the error message is being used before any value has been assigned to it, so it has no meaningful value.
Action: Please ensure variables have been assigned to before using them.
QuickPaint:EXAMPLE_BIS_OT_BAND1:0001/01/01 verified OK
QuickPaint:QH_ASSIGNMENT_NAME:0001/01/01 verified OK
QuickPaint:TEMPLATE_ABSENCE_DURATION:0001/01/01 verified OK
QuickPaint:TEMPLATE_BIS_DAYS_TO_HOURS:0001/01/01 verified OK
QuickPaint:TEMPLATE_BIS_TRAINING_CONVERT_DURATION:0001/01/01 verified OK
QuickPaint:TEMPLATE_FTE:0001/01/01 verified OK
QuickPaint:TEMPLATE_HEAD:0001/01/01 verified OK
Template Information:PER_QH_JOB_EI:0001/01/01 verified OK
Template Information:PER_QH_ORG_EI:0001/01/01 verified OK
Template Information:PER_QH_POSITION_EI:0001/01/01 verified OK
Template Information:PER_QH_SUPERVISOR_CONTACT_EI:0001/01/01 verified OK
User Table Validation:CHECK_RATE_TYPE:0001/01/01 verified OK
The formula wrapper package was created successfully.
Executing request completion options...
Finished executing request completion options.
Concurrent program returned no reason for failure.
Exceptions posted by this request:
Concurrent Request for "Bulk Compile Formulas" has completed with error.
Concurrent request completed
Current system time is 15-APR-2012 00:51:23
Please help me out.
Thanks & Best Regards,
Waqas Hassan -
Running LabVIEW 7.1 on Windows 2003 Server with Terminal Services
We are setting up a newtork based solution with LabView. I have looked for documentation on installing LV 7.1 on a Windows 2003 server to run the applications and then have destkops connect to it. Can this be done with a Terminal Services Access solution? Another words, if we were to purchase the LV Volume License Manager, can you install LV 7.1 onto a Windows 2003 server and run the application through TS across a 1GB backbone from the desktop, which makes the server do all the processing?
On Fri, 29 Oct 2004 07:42:13 -0500, ITIQ wrote:
> By running a session through Terminal Services you are NOT running
> anything on the desktop it all runs on the server. So if the software
> was installed on the server and you had the correct number of licenses
> that you allow to connect through Terminal Services, would this not be
> allowed under the EULA?
Sorry for the delay. I'm surprised Philip didn't get back to us... Phil
are you there? Based on his comments, I think he misunderstands your
situation (no offense Phil).
You and I are both talking about the same thing. You basically want a
terminal server license. NI will not provide it. They told me (over the
phone) to get a multi-seat license (MSL). IMO, that's unacceptable. I
expect a LV license taylored specifically for thin client networks. A
multi-seat license is for -->installing<-- on multiple machines. It
conforms to a totally different set of rules. One big one, an MSL assumes
that you intend to run LV locally to interact with DAQ hardware. Since
this won't be done with the thin client, you shouldn't have to pay for it.
> I am not sure if the question is if the license is valid or not, I am
> first just trying to figure out if you can even install LV on a Windows
> 2003 server and run it through a Terminal Services Session.
Since you are talking about a Microsoft operating system, I would say this
cannot be done without some additional/costly junk installed.
Here's another option. If the people you're supporting don't have any
platform dependent things like ActiveX in their LV applications, you
should consider using a Linux-based terminal server. I know for a fact it
works.
I've assisted in setting up a network like this before:
* One Linux terminal server with LabVIEW for Linux (Full Dev)
* One WinXP box on the network with LabVIEW for Win (Prof Dev)
* 5 cheap thin clients
They developed LabVIEW source code on the thin clients and then compiled
packages on the WinXP box for distribution to their customers. The WinXP
was only used for compiles so they just hopped on when necessary. The
eventual plan is for the thin clients to simply open a RemoteDesktop
(using RDP) terminal session and do the compiles from there. I'm not sure
how to do that yet... on the Windows side.
> I see the comments on calling VIs through LV. I am a Network Engineer
> not a LV Developer, so unfortunately I do not know what a VI is. All I
> am looking to do is run low end PCs with LV if I have to, but use the
> server as the workhorse to process all sims etc.
Phil must have thought you needed a LV application to access the front
panel controls of another LV application running on a remote machine. The
VI server is handy in that area but useless in your case.
Hey, you wanna hear about cheap network infrastructure? We bought our
thin client boxes for $15 each! Go to ltsp.org if you want more info on
configuring Linux as a terminal server.
You, and anyone else, can also email me at gnu_voodoo [at] netzero [dot]
com for questions/comments. -
Windows 2003 server standard edition on X4100
Trying to get it to instill windows 2003, everything goes fine with updating software, identifying windows 2003 server and selecting the 32-bit version, until the identifying distribution page, where it stalls / does nothing when I click next. So I'm kinda stuck at a dead end, any suggestions anyone ?
Before considering ways to overcome process addressing limits (32-bit process virtual address space), Windows Server Std Ed can use/see maximum 4 GB RAM. You cant fit 5GB Oracle Server memory + other stuff + OS in that. I guess your only options are EE 32-bit or Std Ed x64, if you have the hardware.
But, staying on the 32-bit path, it will be hard to achieve confilicting objects of large memory areas. Remember that process virtual space is 4GB regardless of how much RAM the hardware (and OS) can manage. -
Moving oracle 9i database from windows 2000 to windows 2003 server
hi everybody,
plz provide me a solution how to move oracle 9i database from windows 2000 server to windows 2003 server with step by step and also with commands plz as i am very new to oracle
thanks in advance
sureshInstall 9i on windows 2003 server and patch to the same level as the Oracle on Windows 2k
Shutdown and make a cold backup of your old database. That includes datafiles, controlfiles, redo files, init file (spfile)
Copy and put these files to the exact same directory structure/location, for example if old file is under D:\oradata\mysid\ then the file on new file should be under same directory. (If you are using Network Storage that make things easier, just mapping to the same drive letter.)
Also make sure archive log dest and all dump dest directories are created. You don't have to copy all old logs and dump files over.
Use oradim to create a new service for the database instance
http://www.psoug.org/reference/oradim.html
Set proper ORACLE_HOME, ORACLE_SID envionment varibles
Run netca to configure listener, actually copy listener.ora and tnsnames.ora to $ORACLE_HOME\network\admin will do
Try to start the database -
Challenges with the TREX Stack 14 with Windows 2003 Server
Hi
I have been struggling with the TREX installation on Windows 2003 server and are note able to get the green icon for the HTTP server.
I have been searching this Forum and seen a lot of topics on this issue, but unfortunately I am not able to solve it.
On my server I have installed the following components:
EP stack 14
SAP R/3
SAP ITS
If anyone have any ideas of how to solve my case - I will be very pleased
Regards
Kay-Arne S. AarlieHi
We have managed to solve this issue
First i set the security settings for my trex_instance folder "C:\usr\sap\trex_06". Here i added the user IWAM_"MyHost" which is the "Launch IIS Process Account". Gave it the permissions for "Read & Execute, List Folder Content, Read" and then hit the button "Advanced" - selected the user once more and "Apply" - "OK" - "OK".
In the IIS and its properties for Web Sites and Services i set the checkbox for "Run WWW service in IIS 5.0 isolation mode".
Restarted the IIS and the TREX HTTPServer went green and I was also able to use the ITS.
Regards
Kay-Arne
Maybe you are looking for
-
Display Subtotals on ALV Report W/O changing Layout
Hi , I need to display subtotals of quantity fields in my output of report ,with corresponding production order by using ALV container,Layout default seetings won't work here because user has to do many operations such as sorting filtering etc ,after
-
FCP7 cutting off the end of my projects... is there a workaround?
Really stumped on this one and thanks in advance for taking the time to read this. My issue is that I have a 1 minute 50 project I am exporting. Nothing fancy, just a few cuts with a bit of music. For reasons I do not understand, FCP 7.03 exports
-
Assign values dynamically to radio button
I am creating an online test. I will need to display answer choices from the table. I created radio buttons for these answer choices and I could put the labels dynamically by using Set_Radio_Button_Property('block_name.radio_group_name', 'radio
-
When i try to connect Itunes from my Iphone 5 with IOS 7.02 to the computer, it does not connect..It says network connection error and also finally says error 11222..Please would anybody be able t advise me?
-
Ipod touch missing pairing record
Built new Windows 8Pro 64Bit computer, installed Itunes, updated Itunes, now my IPOD Touch comes up with Ipod missing pairing record, what does that mean and how do I correct.