Windows 2003 Server Fax and Scan to WIndows 8.1

I have a server with Windows Server 2003 on. We have computers running WIndows 2007 and Windows Fax and Server. All was great, could see the faxes inbox on the computer etc. Now I have a machine with 8.1 Pro and connected great to the Windows Server, can
see the sent items but cannot see the inbox faxes! Really am stumped, any help would be great.

Hi KFoote19,
Before going further, would you please let me confirm whether this issue just occurred on Windows 8.1 Pro client
computer? Were all Windows 7 client computers OK?
Please follow the following KB and perform a clean boot in Windows 8.1, then monitor the result.
How to perform a clean boot in Windows
In addition, please
reproduce this issue and use
Process Monitor to check the process if you can find more clues.
By the way, please check Event Viewer if you can find some relevant events.
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1

I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machines. I can scan using "Windows Fax and Scan" and other programs including My Image Gardens but no luck with faxing. I can send faxes using print function and chosing a Cannon MX920 series fax driver. The problem is to recieve faxes. I've connected MX922 wireless and wired with no help.
Does anyone have the same problem? Any ideas?

Hi Anton,
thank you for your advice.
In case this is going to fix itself in 25 hours I will check for the issue then. I'm gonna let you know whether the issues has disappeared.
But it sounds to me a little bit, like you have been expecting that behaviour? Have you? Especially within a Lab it is very confusing to have test clients which appear fully functional 25 hours after the setup has been succeeded.
I've followed your annotation and posted the log files on the Connect portal.
Thx
Peter

Install Oracle 10g on Windows 2003 Server cluster (MSCS)

Hi all
How do I install Oracle 10g on Windows 2000 cluster (MSCS installed)?
I have a 2-nodes Microsoft windows 2003 server cluster and I want to install Oracle 10g,
Do I folloow this order:
1. Install the software on both without the database
2. Create the database from the first node
in this case, The second node can see the database as it is available?,
and what about the IP adresses?
If you can point me to some documentation, or help in any way, I would appreciate it.
Thanks for any help.

Read here...
http://download.oracle.com/docs/html/A96685_01/intro.htm
>>
Oracle Fail Safe comprises multiple components: Oracle Fail Safe Manager, Oracle Services for MSCS, and server components specific to Oracle Fail Safe.
>>
So I don't know how you can achieve this without Fail Safe.
There might be other link which I cannot find right now.

Getting folder free space in a Windows 2003 server with folder cuotas

Dear Friends:
First I have to request apologizes about my bad English.
I was wondering if the following could be done: stablish a folder cuota un Windows 2003 Server R2, and retrieve the folder free space with Java.
With the file.getUsableSpace, I can obtain the free space of the entire partition, but I'm only interested in a specific folder.
Is that possible?
Thanks in advance.
R. Camps.

Dear Andrew:
Thank you for your suggestion, but I know more or less how to configure the quotas over Windows folders. That is not a problem.
I will try to explain my problem in other words. Imagine a folder called "c:\myfolder", with a quota of 2Gb, in a hard disk with 250Gb of total space.
When I do:
File f=new File ("c:\myfolder");
long s=f.getUsableSpace();the method getUsableSpace returns 250Gb, not 2Gb. For me, it would be wonderful to obtain the free space of the quota value, not the free space of the partition.
Thank you very mucch for your attention.
R. Campos.

Cannot send/receive Fax through Windows Fax and Scan

Having a problem with Windows Fax and Scan on Small Business Server 2011 Standard SP1. When I call the fax number, I can see the line ringing in the Fax Status Monitor, but it errors out with "The incoming call cannot be answered as a fax
call". I've also tried sending and receive an error: "No dial tone was detected" I've connected a regular phone to the line and placed an outside call and received a call from an outside line. No errors are logged in Event
Viewer, but If I check the Server Roles, Fax Server shows Event ID 32092, 32032 and 32031
Troubleshooting so far has consisted of:
Restarting Fax service
Removing/Readding the Fax Account in Windows Fax and Scan
Checked Print Spooler and Fax queue for held documents to clear (none)
Uninstalled/reinstalled the fax modem in Device Manager
Run Windows Update(several security updates pending)
Checked the DeviceToMonitor key in HKCU to HKLM\Software\Microsoft\Fax\UserInfo matches the DeviceName key in HKLM\SOFTWARE\Microsoft\Fax (at one point it did not match)
Removing/Readding the Fax Role. In the process, also removing registry keys: HKLM_SOFTWARE_MICROSOFT_FAX, HKCU_Software_Microsoft_Fax, HKLM_SOFTWARE_Microsoft_Windows_CurrentVersion_Telephony_CountryList, HKLM_SOFTWARE_Microsoft_Windows_CurrentVersion_Telephony_Locations.
At one point or another, I have already reviewed the following links:
http://social.technet.microsoft.com/Forums/en-US/9dfec81d-8223-47fd-a208-c27521d414a9/sbs2008-cannot-configure-or-start-fax-service?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/73394a76-4dab-4f6b-abaf-b794c57a750c/
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/in-windows-fax-and-scan-i-cannot-get-the-fax/219a1468-7214-4b7a-9205-c67131f6f08d
http://social.technet.microsoft.com/Forums/windowsserver/en-US/773a35b3-52b1-4aff-be75-55386fd5d5b2/server-2003-fax-service-unable-to-receive-faxes-the-incoming-call-cannot-be-answered-as-a-fax-call?forum=winserverprint
http://social.technet.microsoft.com/Forums/windowsserver/en-US/73394a76-4dab-4f6b-abaf-b794c57a750c/cannot-add-a-fax-account-in-windows-server-2008-r2-enterprise?forum=winserverprint
Please let me know if anyone has any other suggestions.

Hi billats,
Regarding to Event ID 32092, 32032 and 32031, please refer to the following articles.
Event ID 32092 — Received Fax Status
Event
ID: 32092 Source: Microsoft Fax
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Event ID 32032 — Sent Fax Status
Event ID 32031 — Sent Fax Status
On current situation, please refer to the following steps to troubleshoot. Then check if can find more clues
and help us to solve this issue.
Please verify if the incoming fax can be received from other fax machines.
For modem, please temporarily reduced the speed to 4800bps for the Fax software.
Please increase the
Rings before answering value for the fax device to 2 rings in Shared Fax Service Manager.
Just for a test. Would you replace the old modem with a new one? Then monitor the result.
Hope this helps.
Best regards,
Justin Gu

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

SCEP on ISE 1.2 and Windows 2003 Server

Hi there
has anyone ever be able to get SCEP on ISE 1.2 working with Windows 2003 Server? I know Cisco recommends Windows 2008 Server onwards, but sometimes the server infrastructure is not yet there.
Thanks in advance and best regards
Dominic

Hmm, good question that I would also like to know the answer to. All of my deployments have been either 2008 or 2012. I believe long time ago I got it working in my lab with 2003 but then my 2003 server blew up so when I re-created it I did it with 2008. However, I cannot confirm 100% and even if it was true it was not in a full production environment. So it would be nice if someone else can chime in here.
I did come across this though that would suggest that it is supported with some tweaks:
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_ISE.html
Windows Server 2003, Microsoft SCEP (MSCEP) required a Resource Kit add-on to be installed on the same computer as the CA. In Windows Server 2008, MSCEP support has been renamed NDES and is part of the operating system. NDES may be installed on a different computer than the CA (http://technet.microsoft.com/en-us/library/cc753784%28WS.10%29.aspx).
Thank you for rating helpful posts!

OS 10.3.9 and Windows 2003 Server - Can't get to the network

My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
Thanks.
Power Mac G5 Mac OS X (10.3.9)
Power Mac G5 Mac OS X (10.3.9)

My company just up graded from a Windows 2000 to a Windows 2003 server. I am lone Mac user. Yesterday, with Windows 2000, I had no trouble accessing several drives on the server. Now with this upgrade, I can't log on to any of the drives.
The IT folks are not that Mac savvy and they've tried a few things regarding security, but they're lost, and haven't found anything from Microsoft that helps. And I know nothing about networking. I've tried searching Apple but can't find anything specific to this problem. I can print to all the networked printers, just can't get to the drives.
Is there something we're missing here? Something in my System Preferences that we needed to adjust first?
Thanks.
Power Mac G5 Mac OS X (10.3.9)
Power Mac G5 Mac OS X (10.3.9)

Windows fax and scan printing

When printing from winnows fax and scan ( windows pro), I can not get the pages option to work. If I rec a 5 page fax and only want one of the pages I have to print them all. I have looked for a setting to check off or unchecked but have had no luck in finding one. Can anyone help?
Thanks
Derek

- try to update fax & scan ( via windows update )
- *click control panel > un-install/change a program > turn windows fetures on or off > uncheck fax & scan > restart your computer > then check the fax & scan again > check if issue persists.
* make sure you back-up your current settings & files, after re-installing fax & scan, settings & files may be lost.

Windows fax and scan disconnects prematurely then redials

windows fax and scan disconnects prematurely then redials to SOME but not all of my contacts
SO I have been using the dependable Canon FAX software through my MX860, same MS Contacts address book, same win8.1-64 fickle OS

Hi,
We can try to update the driver for your scan and fax and meanwhile, we can contact the manufacturer to update the firmware of your device.
Also try to repair the Fax and scan components by turn off and turn on in Turn windows features on and off:
If the issue persists, please help to upload the event log here for further research.
Kate Li
TechNet Community Support

Oracle 9i - Unable to set /PAE and /3GB Switch in Windows 2003 Server SP2

Hi
I was wondering if anyone had any experience on Windows 2003 Server (SP2) with setting /PAE and /3GB switches.
I am unable to set both together, setting one or the other works fine in the boot.ini.
Oracle seem to think you can set both but it causes my OS to crash/become unstable.
Has anyone set both switches together on 32 bit Windows 2003 Server successfully?
I am using Oracle 9.2.0.3 Enterprise Edition.
Thanks

The server is new. But we installed 10g before 11g was available. Then upgraded to 11g, so it is a little mess. What the oracle installer should have done in a fresh install, it is maybe not what the server has now.
I have checked for memory issues, processor issues, http errors, every EM setting and metric, and everything looks just right, but the applications are slow and the users are upset.
Anyway, thanks for the advice. Maybe we will need to re-install everything or go back to 10g on Windows 2003 Server x32. That configuration was working fine before rushing into 11g.

Windows Fax and Scan

Hi, My Computer is a Lenovo G50 (windows 8.1) and my Printer/Scanner is a HP Deskjet F4580 (F4580) All – in – one Series. The deskjet is connected wirelessly to my computer and prints documents OK but will not scan documents using ‘Windows Fax and Scan’. With my old computer I was able to scan documents. Can anyone help.

Hi canalboat211,
See if this video helps at all.
Regards,
Dave

Windows Fax and Scan, can we label incoming faxes?

Hi all,
We are using Windows Fax and Scan in our small business and it works great EXCEPT that I cannot figure out
how to add a description to received faxes to make them easier to access later
We can do this with outgoing faxes, but cannot see where to do this with incoming faxes
any thoughts?

Hi Chry,
No, there is no method to add the description for the received fax. You only add the flag "mark as read /mark as unread".
I could read the subject to know the synopsis. Furthermore, the Preview pane also could let you read the first page of the fax.
Click View-> Preview(marked), Add/Remove columns-> choose "Subject" to displayed columns -> OK.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

WRV54G and VPN and Windows 2003 Server

Hello. I use Windows 2003 Server on my laptop and trying to establish VPN into my WRV54G. QuickVPN is not compatible with the OS, so that's not an option. I tried the manual setup and I got to a point where I had to enter the destination IP address. I use a DynDNS address and so I won't have a static IP.
I'm using firmware version 2.39.2.
Thoughts?
Thanks!

First thing i would like you to check is if you are able to "ping" the WAN ip address for the WRV54G.
Also what are the settings that you have on the WRV ??? typically the remote secure group and remote security gateway should be set at "any".
In the WRV...under the VPn go to advanced VPN and sset the mode to "agressive" , enable keep-alive and netbios broadcast....
let me know if this work or let me know a few more details.

DLU - Zen3.2sp3 and Windows 2003 Server TS

Hey guys,
Im using Windows 2003 Server with TS installed for Citrix 4.0 running
Netware 5.1 Sp7 with Zen3.2 sp3. Are there any issues with DLU working on
this setup. At this stage its not working. Using the Novell Client 4.90 Sp2.
Policy works fine on XP Pro, Windows 2000 server and Pro.
Any help would be appreciated.
Thanks
Rami

rami,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Windows 2003 Server Fax and Scan to WIndows 8.1

Similar Messages

Maybe you are looking for