Windows 2003 server for IPCC 7.0

Hi all,
I got a problem with IPCC 7.0. I have tried to reinstall the IPCC 7.0 since get the crash of Hardrive. When I run the win 2003 server that bundled from cisco, I found this error message :
"The installation program has determined that this server is not supported by this media".
Last year, I have installed this server with the same source of windows version (2003). But I still dont understand why it does not work right now.
Below my spesification server :
Type          : MCS-7825H-3.0-SERVER 74-3461-01
Memory     : 2 GB
Hardrive     : 80 GB RAID 1 (consist of 2 Harddrive @ 80 GB)
I also attach the capture of error message. Please kindly help me to solve this issue .
Thank You.

AA, you can try standard Windows 2003 operating system.
Sent from Cisco Technical Support iPhone App

Similar Messages

RAID drivers that support Windows 2003 server for Qosmio G30-153

Hi,
Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
Thanks in Advance.
Abdul Hameed

Hi
Windows Server 2003 should support the XP drivers.
So try to search for the RAID XP drivers!
regards :)

Running Windows 2003 Server on Xserve Intel with BootCamp?

Well...
This sounds like awfully bad idea, but one of our clients needs to run Windows 2003 Server for a certain project in their organisation. Fundings for the new hardware is available. Windows-compatible hardware!
The idea here is to get fundings for a new Xserve, run it with Windows 2003 Server in the project and then keep the delicious hardware for free when the project ends. A PC-server would be thrown out of a window in this 100% Mac-centric department.
Windows 2003 Server runs smoothly on a MacPro with Boot Camp and Parallels Desktop. What about the XServe Intel?

Schuckert-
Greetings.
Are you in a position to test the configuration for a while? If so then I vote do it. If not, you could buy a copy of OSX Server and install it on a Mac Pro and try running your software on the XServe platform.
However, depending on your relationship with this client, I would have them sign a release based upon the beta-ness of the software.
A lot of us here are not in a position to give such things a try-just yet. Too busy trying to make things transition smoothly on the accepted configurations.
Although I will say that I suppose a client will eventually pose the question to me (:>)
Luck-
-DaddyPaycheck

How can I open all ports on a Window 2003 Server

How can I open all ports on my windows 2003 server for a specific range of IP addresses?

Hi,
Just want to confirm the current situations.
Please feel free to let us know if you need further assistance.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

DLU with Windows 2003 server

I am going to be blustery only to provide you with the most info as
possible.
I have setup a Windows 2003 server for terminal services. Installed the
latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
zfdagent.msi from zfd4.01.ir7.
The setup is similar to any WindowsXP machine and I have done this a
thousand times. I have verified that the DLU policy set for the container
includes a DLU for Windows 2000 and Windows 2000 Terminal Services. Okay I
should be able to login and have zenworks create a local users acount but
it does not.
Here are the differences that may effect the proper operation of desktop
management:
a. I have this terminal server setup as a member server in our AD domain -
only to connect to the TS License Manager.
b. I have setup the Netware client location policy | login profile |
Windows Tab | to login in to the local Win2k3 server NOT the domain - and
of course the username field is empty.
c. Then I install the ZfdAgent.msi - when the intsaller gets to the
MiddleTier section - I usally click next and ignore this area, however
this time around the installer will not continue unless I enter an IP
address into the Middle Tier server field.
Other than the above - fairly standard install.
Any help appreciated.
Regards
Ross.

> I have setup a Windows 2003 server for terminal services. Installed the
> latest Novell Client 4.9 sp2, nici, nmas. I installed the latest
> zfdagent.msi from zfd4.01.ir7.
Windows 2003 is not supported with ZfD4.x.
You must use at least the Agent from Zen 6.5.
Regards
Rolf Lidvall
Swedish Radio (Ltd)

(Very Ergent)R12 on windows 2003 server with itanium processor...

Hi,
Is it possible.
Processor : Itanium 2(64bit)
OS : Windows 2003 server for itanium (don't know 32/64bit)
http://www.microsoft.com/servers/64bit/itanium/overview.mspx
ERP: R12 for windows(32bit)
Is it possible with these combination
Thanks & Regards,
Shankar

Duplicate thread (please post only once):
Is it possible?
Re: Is it possible?

Windows 2003 server access getting slow from Windows7/8 client

We have Windows 2003 Enterprise Server. If I try to access through Windows 7 or Windows 8 client PC then I am getting very slow access. Slow access in terms of, if I am taking remote desktop of server [OR] if I directly browse server directory [OR] even
accessing any web application on server it is very slow.
But if I am accessing though any Windows-XP base client or even other servers having Windows 2003 or Windows 2008 then access in good.
But interesting thing is even we have other Windows 2003 server for which I am getting normal response.
Can someone guide me on the same? I am not able to understand the root cause of it.
-Abhay

Start with decreasing SMB version in clients. For inspiration look here
http://www.petri.co.il/how-to-disable-smb-2-on-windows-vista-or-server-2008.htm
Rgds
Milos

EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asap

hi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu

Best practice for # of drives for Oracle on a Windows 2003 server

I need to know what the best practice is concerning the # of drives that should be built on a Windows 2003 server to ensure best performance and most effective back up and recovery, for both the application itself and the data base.
I'm not certain, but it may be only a 32 bit machine. I'll update this once I know for sure.

We are in the process of migrating our Oracle 10 database (20G) to a new maschine.
How should we configure our disks (8 in total)?
1. SAME: "Stripe and mirror everything"?
2. Doc 30286.1 "I/O tuning with different RAID configurations" and 148342.1 "Avoiding I/O disk contention" say:
database files on RAID01
redo and archive logs on RAID1
temp on RAID1
So, what is the best practice?

Windows 2003 server loses security tab for folders created in OS X

We have a centralised storage system that is running on a Windows 2003 cluster. This server has folders for each department so they can store colaborative work. They can create their own folders and files within their departments folder.
When files are created using a Mac on this service and then the folder properties are viewed under Windows XP or 2003 the security tab seems to be missing. NTFS permissions still exist on the folder as items beneath that are inherriting permissions still have those inheritted permissions applied to them, but the security tab has gone.
This can also mean that Windows users cannot see these folders and therefore the whole idea of a collaborative storage server is lost.
We have investigated this issue as best we can so far and tried copying folders onto the server with whitespace at the end of the folder name to see if this was the problem, it does not appear to cause the issue.
We have also tried copying folders up to the server from a mac using invalid characters \ / * ? " | were all tried, on the server the symbol is simply substituted with a space and the folder works correctly.
We have tried copying a folder with space at the end of its name and a file within to the server and this also works correctly.
The only common factor seems to be that a lot of the folders with a missing security tab have a single space at the end of the folder name, however this does not seem to cause the issue.
One way around the problem is to use the subinacl.exe tool at the command prompt as the server administrator to regain ownership of the folder and then delete it, however this is not a solution for folders that contain data. This workaround was from the microsoft article http://support.microsoft.com/kb/320081 in step 6.
If anyone has any idea what may be causing this on the Mac side it would be good to know.

We have narrowed down the problem and found the culprit.
The issue is only repeatable on 10.4.x (we used 10.4.11 for testing, but it may affect earlier versions as well)
10.4.11 Local folder created with trailing space in the name, then copied to the Windows 2003 server = loss of security tab on this folder
10.4.11 existing folder on the server has a trailing space added to the folder name = loss of security tab on this folder
10.4.11 existing folder on the server has the trailing space REMOVED from the end of the folder name = security tab returns with permissions in tact
10.5.x Local folder created with trailing space in the name, then copied to the Windows 2003 server = no problem
10.5.x existing folder on the server has a trailing space added to the folder name = no problem
10.5.x existing folder (created under 10.4.11) with trailing space in the folder name has the space removed = Error code 43, unknown error occured
Also interesting is that the illegal characters for Windows \ / * : ? " | in the folder name prevent the folder being copied to the Windows 2003 server in 10.4.11, but are allowed in 10.5.x - all expect the : which is an illegal character in OS-X as well. None of these illegal characters cause issues on the Windows 2003 server as they are simply translated to a space.
The solution would be either as AJ mentioned to purchase Thursby AdmitMac or to upgrade all the users to 10.5.x (which I'm sure would make Apple happier!)

Very long search times from an IMac running 10.6.7 Snow Leopard when searching for files on a windows 2003 server

The issue is as follows:
The Imac is connected to the windows 2003 server via SMB type connection.
There are four sub folders in the main directory. We go to one of the sub folders in this case Server.
We go to search window and type the file name that we want to search such as test .
The choices selected for search parameters are Server for location and contains (same results if picked by file name)
Search takes roughly 6 minutes before it returns the result.
If we do the same search on the old Mac Server it will take 15 seconds to complete using same search parameters.
Any ideas on how to speed up search times to the Windows 2003 Server? I have tried going to finder preferences and removing the sharing section. That did not help.

Okay, I've....
1) Reinstalled XE, to start from scratch
2) Went in to SQL*Plus, did a "create pfile from spfile;"
3) Shutdown the database
4) Started it up in MOUNT mode
5) Ran NID, to change the database name from 'XE' to 'CTXMGMT'
6) Shutdown the database again
7) Edited the pfile to change the database name (i.e. "db_name='CTXMGMT'")
8) Started up the database
And that worked! So that's good... but now my question is:
How do I change the SID for the database? Currently, the instance name for the database is still 'XE'....
SQL> select instance_name
2 from v$instance;
INSTANCE_NAME
xe
I'd like it so a connection could be made to the database with the tnsnames.ora file looking like this:
CTXMGMT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = rodin)(Port = 1521))
(CONNECT_DATA = (SID = CTXMGMT))
Could someone explain how to get the database to this state? Thanks.
- Gary

Windows 2003 Server reboot but not unexpected, couldnt find the trigger for reboot

Hi All,
I have windows 2003 Server 32 bit,std. Which is getting rebooted every 2 days once at 5 AM. I couldnt find the cause for the reboot. Need
I dont see anything in system log apart from event 6006 (event log service stopped).
Enabled advanced Auditing , nothing suspecious found.
No scheduled task or job.
Antivirus scan is clean, no internet access to the box.
Its Virtual machine, all other VM's hosted on ESX server (where the machine with issue hosted) are working fine.
Removed all users admin rights.
Disabled NIC to check if the reboot intiatation happening from network, however server still reboots at 5.
Run process monitor and saved the file at 4:59:38 AM (just before the reboot), nothing supecious found.
Its used for build , various versions of Visual Studio is installed on the box and other tools are installed too.
However could not find a reason or log to find what is causing these reboot.
Need a direction on troubleshooting this urgently.
In application event log i see below.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: ExitWindowsEx executed succesfully!.
The description for Event ID ( 0 ) in Source ( Poweroff ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to
retrieve this description; see Help and Support for details. The following information is part of the event: Initiating FORCE REBOOT.

Hi,
I agree with Dave Patrick, please confirm there have any software trigger the Windows restart API, and please refer the following hotfix scenario applied to your environment
or not.
More information:
You may experience an abnormal shutdown on a Windows Server 2003-based computer after the Windows logon screen saver starts
http://support.microsoft.com/kb/916719/en-us
Why Windows NT Reports 6005, 6006, 6008, and 6009 Event Log Entries
http://support.microsoft.com/kb/196452/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to setup SMBX client for work with Windows 2003 server's shared folders?

Dear community,
Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
How should I set up SMBX? Is there manual?
I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
Thank you in advance

Hi,
Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Manual steps to clear the records.
Dnsmgmt.msc [Dns Management]
A.Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
B.Expand the forward lookup zones\domain.com folder
i.Delete Host(A) records of dc’s which are non-existant.
ii.Correct the NameServer (NS) records
iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
· Dssite.msc [Sites and Services]
A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.Delete incorrect subnet configurations [Sites\Subnets]
C.Delete incorrect site links [Sites\IP]
· Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
· Force replication – ‘repadmin /syncall’

Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03

Hi Experts,
A customer wants to know if there Are any known issues with applying Windows 2003 Server Service Pack 2 for product version 4.0.1.0.03 .
i gave him the answer that SP2 is not tested for that version hence it is not supprted. So he now asks me if Windows 2003 Server Service Pack 1 is supported for 4.0.1.0.03 , Any input would be of great help.

Hi,
Be careful when you say SP2 is not supported.
Hyperion s policy in terms of third party products was the following (I would imagine this should remain the same with Oracle, however you may want to check with your local support team):
Hyperion products are tested against the versions specified in the product matrices. They do not actively look for issues in maintenance releases or service pack upgrades from 3rd party vendors for obvious reasons (there would be far too many). They will investigate any maintenance release or service pack upgrades as long as the vendor confirms backward compatibility.
Therefore SP2 would be supported with 4.0.1 and Hyperion/Oracle should investigate any issues you may encounter.
However keep in mind that if a specific issue you have encountered in 4.0.1 is caused by SP2 but fixed in a later version then Oracle's recommendation will be to upgrade.
So its a catch 22 situation really.
Personally I would take this opportunity to recommend an upgrade to 9.3.1 ;-)
Hope this helps.
Seb

Oracle 9i Enterprise for Windows 2003 server 32bit

Hello,
tried to download an Oracle 9i Enterprise for
Windows 2003 server, 32 bit. But all I've got
is a patch... Perhaps the wrong file in the
download area?
Hans-Juergen Thiess, Berlin / Germany

Hello.
I dont Know, from where download Oracle 9i Database.
In http://www.oracle.com/technology/software/products/oracle9i/index.html, only can download Release, but not the full version.
Can you help me?
Thanks

Windows 2003 server for IPCC 7.0

Similar Messages

Maybe you are looking for