Windows 2008 64-bit and Microsft ODBC for Oracle problem

Hello,
I am trying to create ODBC connection to Oracle 9i Database on remote server. I am using Windows 2008 64-bit but it is not showing Microsoft ODBC Driver for Oracle. Could any one suggest what to do?\\
Thanks

GQ wrote:
Hello,
I am trying to create ODBC connection to Oracle 9i Database on remote server. I am using Windows 2008 64-bit but it is not showing Microsoft ODBC Driver for Oracle. Could any one suggest what to do?\\
ThanksInstall the Oracle client and use the Oracle driver. You're going to need it whether you use the MS driver or Oracles. ODBC drivers do not work apart from the client of the underlying database product.
When you do the install, you will need to do a custom install and specifically select for the Windows components.

Similar Messages

  • Can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server

    im my environment we are trying to upgrade from server 2k3 to 2k8, out testing done on server 2k3 to 2k8, but can we run domain controller windows 2008 32 bit and additional domain controller on 2003 server ...kindly suggest
    Nitin Gaurav
    [email protected]

    Yes you can. If you have two 2003 AD servers currently and upgrade one of them to 2008 AD then they'll continue to be able to work together. The domains functional level will remain as 2003 across both servers so at this stage you won't get any benefit from
    the new AD functionality available in 2008.
    Once you've then upgraded the second 2003 server to 2008 you can then upgrade the functionality levels in AD to make it 2008. It's been a while, but I believe it doesn't happen automatically, so once all AD servers have been upgraded you have to go into
    AD and upgrade the functionality levels yourself.

  • TS4123 This is not correct solution. I have fresh copy of Windows 7 64 bit and I have the same problem.  Autorun only shows the Bonjour service.  It started when try to sync more than one iphone.

    This is not correct solution. I have fresh/new copy of Windows 7 64 bit and I have the same problem. 
    Autorun only shows the Apple Bonjour service.  It started when try to sync more than one iphone over WiFi. I have two iphones and an iPad. I turned off syncing over WiFi and still has high CPU utilization. One of the CPU's is pegged at 100%.  It is the AppleMobileDeviceService.exe process.

    For the record, I then followed the suggestion of MarcDCMB in https://discussions.apple.com/thread/4291206 of just manually restarting the Apple Mobile Device service in Windows services.msc once each time after starting iTunes and the service no longer hogs CPU after that service restart.  Not too painful as a work-around, and apparently an effective one, but clearly not a solution to the problem.  Again, as above, all the other solutions didn't work for me and I have no conflicting software as far as I can tell. So you'd have to say this Apple's problem.
    Also FTR, I am still on the 5.2.0.6 version of the Apple Mobile Device Support MSI and I don't know if that is relevant to this work-around working but my sense is that it is NOT relevant.  I'll report back on this thread if I re-upgrade and the problem returns in spite of the service-restart approach.

  • Windows 2008 64 bits and BO XI 3.1

    Bonjour,
    Que faut il faire pour installer BO XI sans problème sur un serveur windows 2008 64 bits virtualisé ? paramètres,composants 32 bits à installer ou à paramétrer ??
    Merci de votre réponse
    Cordialement
    F. Bedouin
    02.23.21.76.54

    Hi Francoise,
    You should be aware that SDN forums are English spoken forums.
    I don't know BO products and so cannot help you but I suggest that you rewrite your question in English for  a better chance to get a useful answer.
    Regards,
    Olivier

  • I have windows 7 64 bit and install firefox 4 .my problem is after install firefox , icon firefox change please help me

    I have windows 7 64 bit and install firefox 4.after install firefox for one day firefox icon change please help me.
    Thank alot

    See the following  -
    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

  • MOVED: Windows Vista 32-bit and MSI P4M900M2-L audio problems...

    This topic has been moved to Vista problems.
    https://forum-en.msi.com/index.php?topic=110312.0

    Hi,
    I've got the same problem with latency as you. But no idea what to do. Have you tried something out new?
    regards
    MAt

  • Windows 7 64 bit and ODBC connect to Sql data source

    Hi
    Just porting a simple test form over to new laptop with windows 7 64 bit and my odbc connect strings are not working properly.
    They seem to work with Microsoft access, but not livecycle designer.
    I tried the 32 bit ODBC drivers, and at least I can see the first record, but now I get an error when I try and execute a drop down to select a different record.
    Looking at the forum history, a lot of Windows 7 issues but did not see one for ODBC connections....
    Anyone have ODBC working on a Win 7 64 bit system?
    Do they work?
    Do the 32 bit drivers work?

    I believe that the 64 bit drivers are NOT working
    the 32 bit drivers are working.- have them working now!

  • Deploying CF 9 Ent 64-bit on Windows 2008 64-bit

    Hello,
    I'm getting ready to migrate 20 or so websites from CFMX 6.1 Ent (Win 2k3) to CF 9 Ent 64-bit on Windows 2008 64-bit and was wondering if it made sense to tweak the jvm.config file. I looked around on Adobe's site for any guidance regarding "best practices" for JVM tuning under CF 9 but couldn't find anything. Also, most of the articles I've come across related to CF and modifying the JVM seem pretty dated. In any event, the server will have 32 GB of RAM and running a single processor, Quad Core Intel Xeon L5520 (Win 2008 Std 64-bit).
    Can someone provide some insight regarding whether it's needed or even recommended to modify the JVM config?
    TIA

    Hello
    I did a talk recently on JVM.CONFIG related matters at the CFMEETUP site. There is a recording you can view:
    http://www.meetup.com/coldfusionmeetup/pages/Recordings%20of%20the%20ColdFusion%20Meetup-2 010
    Like the others mention, it is an area that is hard to say do this or that in a quick forum entry. The “out of the box settings” may well suit your needs - so if it is not broken why touch it.
    On Win64 and CF9 64 I find adjustments to the maximum heap setting and MaxPerm settings are good, having said that the minimum settings are also important. You need to be aware of what is in the “OUT logs” and how the JVM is working to know if changes are useful or indeed needed.
    HTH, Carl.

  • Oracle ODBC Driver for Rdb 2.10.11.00 on  Windows 2008 64-bit

    Hello,
    Our application runs on Windows 2000 Professional SP4 and connects to RDB databases on Alpha Open/VMS via Oracle ODBC Driver fro Rdb release 2.10.11.00.
    We are migrating to Windows Server 2008 64-bit environment.
    We tested both recent Rdb ODBC driver releases (3.3.0.0 and 3.3.1.0) but we are getting errors intermittently when the application loads data from certain tables. Trace logs show no errors which could indicate the origin of the issue.
    We want to use the old (2.10.11.00) release but it cannot be installed only on the Win 2008 32-bit version.
    Can anyone suggest how to install the Oracle ODBC Driver for Rdb release 2.10.11.00 on a Windows 2008 64-bit Server?
    Thanks in advance,
    Momir

    Hello,
    Take a loot at http://www.connx-net.com/rdb.htm they have a 64 bit ODBC OLE DB JBC and .NET solution.
    Regards,
    Ant

  • Windows 2008 64-bit SQL Server 2008 64-bit Linked Server fails - ODBC connects but has issues

    Installed the 64 but Oracle 11g client and Oracle ODAC. 
    From SQL Server Management Studio run script :  exec master.dbo.xp_cmdshell 'PING OracleHostNameHere'        Ping was successful
    OraOLEDB.Oracle shows up in the Provider list.  Run This Script:
    EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'AllowInProcess', 1
    GO
    EXEC master.dbo.sp_MSset_oledb_prop N'OraOLEDB.Oracle', N'DynamicParameters', 1
    GO
    EXEC master.dbo.sp_addlinkedserver @server = N'Nav14', @srvproduct=N'Oracle', @provider=N'OraOLEDB.Oracle', @datasrc=N'TheOracleHostName'
    EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'TheOracleHostName',@useself=N'False',@locallogin=NULL,@rmtuser=N'TheUser',@rmtpassword='ThePassWord'
    Msg 15015, Level 16, State 1, Procedure sp_addlinkedsrvlogin, Line 49     The server 'TheHostName' does not exist. Use sp_helpserver to show available servers.
    Did the same process on a Windows 7 32 bit Enterprise - ODBC Works after installing ODAC
    ODBC worked, shows list of Oracle servers - picked the server - ODBC successful - MS Access able to use that ODBC service.
    In Windows 2008 64 bit installed both Oracle 11g Client and 64 bit ODAC - ODBC opens, the list of oracle servers doesn't populate, hard code in the host name - ODBC reports Success.
    Another Person Suggested:  Win7 64-bit with Oracle 11g. Oddly enough, it ran differently when I opened a command prompt window as administrator and ran setup.exe with the suggested command-line options:
    setup.exe -debug -printtime -printmemory -printdiskusage -logLevel finest
    While it had previously been failed both by running setup from the Explorer windows as administrator and by running it from the command line as administrator - it died every time at the same point mentioned by others in this thread - just after this message appeared in the log:
    Get view named [SummaryUI]
    ( I have tried re installing with no success)

    Windows 7 Enterprise 32-Bit
    Installed the version 12 for 32 bit ODAC and it worked. The key is to Install as Administrator once it is unzipped.
    Was able to set up Listener then
    Was able to set up ODBC using the ODAC. Connect MS Access 2010 to the Oracle views.
    Then, tried to install the 64 Bit onto Windows 2008 Server.
    It locked up during installation both times.
    Installed ODAC without an error.
    However, the ODBC setup will not provide a list of the servers in the ODBC  TNS Service Name listbox for Server 2008.
    In Windows 7, it populates the TNS Service Name.
    The list box in Windows 2008 is empty.
    Do you know what would cause that?
    The .ORA file scrips look the same on Windows 2008 as they do on Windows 7 except it does not have the (server = Dedicated) argument.
    Thanks.

  • Problems with RH 8 and Windows 2008 64-bit servers with IIS7?

    I have been informed that my company's servers are being upgraded to Windows 2008 64-bit servers with IIS7, from Windows 2003 & IIS6. Probably will be online in April 2011.
    I have a project created using WebHelp, RoboHelp HTML v5. I have RoboHelp HTML v8 (haven't had a chance to use it yet). We are currently using IE7 on XP. Does anyone have any info on issues with RoboHelp v8 WebHelp projects running on Windows 2008 64-bit servers & IIS7 that I need to be concerned about? I thought I should convert the project developed using RH 5 to and RH 8 project, then FTP it to the new server when it becomes available.
    Any helpful info would be much appreciated.
    Thanks,
    Alden

    Acrobat 8 is not certified for Win7, particularly the x64 version. If you got the installation to go, the first step is to update AA8 to at least AA8.2. The x64 with XP required at least AA8.2 and I suspect that has not changed. I would suggest updating to the latest, either from the help menu (until no more updates are available) or by downloading the updates from the adobe.com>downloads page. For the latter, download ALL updates after your current version and install them in ORDER. They are not cummulative in most cases. You only need to reboot after the final update. The updates may get you going. If not, you may simply have to upgrade to AA9 or search for what others have been able to do in your situation.

  • Oracle APEX and Windows 2008 64 Bit

    Hi
    We are using Oracle APEX 3.1 version and Oracle 10G HTTP Server is running on a system which is Windows 2003 32 Bit.
    We are planning server Virtualization and for that i would like to know whether Oracle APEX 3.1 version is compatible with Windows 2008 64 Bit or not?
    Any kind of help is appreciated.
    Thanks,
    Lakshmi

    Hi,
    Thanks for your reply.
    Actually my question supposed to be whether Oracle 10G http server that we are using for APEX 3.1 version is compatible with Windows 2008 64 Bit?
    If we change to Windows 2008 64 Bit do i need to install Oracle 11g http server?
    Advance thanks for your help.
    Lakshmi

  • Need drivers for Photosmart D7560, and Scanjet 4370 for both Windows 7 32 bit and 64 bit

    I need drivers for my Photosmart D7560 Printer and Scanjet 4370 scanner, for both Windows 7 32 bit, and 64 bit.

    Hi, For the printer:    http://ftp.hp.com/pub/softlib/software11/COL30216/mp-75048-1/PS_SF_04_D7500_NonNet_Full_Win_WW_130_140.exe For the scaner (no available):    http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=457534&swLangOid=8&swEnvOid=4063 Regards. 

  • Microsoft ODBC for Oracle on a Windows 7 64Bit OS and Oracle 11g Client

    Hi,
    I have installed Oracle 11g client 64Bit edition on a Windows 7 Professional 64Bit OS. Trying to connect to Oracle DB through ODBC Driver I get the following Message:
    Microsoft ODBC for Oracle:
    "The Oracle(tm) client and networking components were not found. These components ar supplied by Oracle Corporation and are part of the Oracle Version 7.3 (or greater) client software installation....".
    Any ideas how to resolve that problem?

    Hello,
    Please verify the ORACLE_HOME directory is listed on the PATH system variable of Windows 7. Please open the Command Prompt
    and examine the result of the command PATH.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Oracle Client version (32 or 64 bit) to install on a Windows 2008 64-bit m/

    Hi guys,
      I am installing BOXI 3.1 SP2 on a Windows 2008 64-bit server.
      Which Oracle 10g client (32 or 64 bit) should I install on a 64-bit software. I know BO is native 32 bit, so ODBCs should be 32 bit incase CMS repositories are on SQL server.
    Is there a standard for Business Objects for the versions of database client tools to be installed on server?
    Also can we install database clients tools after the Business Objects 3.1 SP2 install on the server, provided I am using SQL server dbs for CMS and Audit databases?
    Thanks,
    G Bala
    Edited by: G Bala on Apr 5, 2010 7:31 PM

    @Duncan
    You recommend using 32 bit Oracle client. Is there any official documents from SAP BO stating this? I have difficulties finding anything. I'm in the same situation:
    OS : Windows Server 2008 R2 64bit
    BO : 32bit
    Oracle Client : 32bit OR 64bit?????
    Is BO 32bit compatible with Oracle Client 64bit, at the level of using Infoview/Desktop Intelligence?

Maybe you are looking for

  • Can I set my iCloud email as the outgoing mail server for my google apps email account in Mac Mail?

    I have a google apps email account from an old client, all my work emails have been going to it for years. As I'm no longer affiliated with this client I'd like to make a transition to using my iCloud account for work. I asked people to use my iCloud

  • Asset acquisition-Table error

    While doing an Asset posting from MM Side, the following error is happening: "No accounts have been entered for depreciation area 01 account allocation 31000 (Chart of accounts 1000)".  "Table Error" I have assigned accounts in AO90 for the acquisiti

  • Problems with login on iPod after auto update of S...

    My father-in-law "V" uses Skype on iPod. Recently Skype auto-updated and "V" could no longer login into his account. I tried to help, sending his email on file to Skype and getting instructions on how to reset password. I suspected that he just forgo

  • Problems with Bash Completion

    Hi, I recently noticed an odd new behavior of the bash-completion package. For example: Lets say there is folder called 'Downloads'. The oldd behavior was: mv Dow[tab] mv Downloads/ Now, it's like this: mv Dow[tab] mv Downloads (with a space after 'D

  • Restart Issues

    I have a new intel imac, which is only 2 months old. I recently upgraded to Leopard. However, this issue has been occurring since before Leopard was installed. When I restart the computer, it shows just a plain gray screen, no apple start up noise, n