Windows 2008 64 bit - BSOD
Hi,
I have a win2k8 - 64 bit VM running on OVM2.1.5 and if i start some I/O in the VM, i occasionally get a BSOD with the "stop 0x00000101" error accompanied with "A clock interrupt was not received on a secondary processor within the allocated time interval".
Any clues?. i see that this issue has been discussed in the xensource lists but no inkling of a solution.
Any help appreciated greatly!.
thanks!
Gak
avasek wrote:
Actually, i am not using the PV drivers. The guests are fully virtualized, can i go ahead and use the PV drivers in the VM's?.Absolutely. :) Check the documentation for more details. Remember to change the vif entry to netfront in your vm.cfg file. If it stays as "ioemu" you may have problems once the PV drivers are installed.
Similar Messages
-
Windows 2008 R2 SP1 BSOD Bug Check 0x0000003b
Hi,
I have a Win 2k8 R2 SP1 VM that keeps crashing every night for the past 2 days. Every time is the same bug check code 0x0000003b. I looked around and found 2 KBs for this specific code:
http://support.microsoft.com/kb/980932/en-gb - does not apply to my system
http://support.microsoft.com/kb/2836373/en-gb - installed the hotfix yesterday but got another crash today
The server has 30 printers installed on it and during the night only one is used so I tend to think that it is causing the crash. The printer has the latest driver installed (Konica Minolta Universal Printing Driver v2.4).
I looked through the dump files generated by every BSOD but I cannot find anything that would point me in the right direction... or I might have missed it.
Here is a bit more info on the server:
Windows 2008 R2 Standard SP1
System is a VM
IIS role installed
30 printers installed - all drivers are up to date
I have stored the dump files here: http://1drv.ms/1kpL9vh
Any help with this would be greatly appreciated.
ThanksHi gogu2008,
First , please keep the VM and Host up-to-date then check if the issue persists .
What is the Host OS ?
How much RAM does the VM have ?
If the VM is using dynamic memory , for troubleshooting you may try to configure fixed RAM for the VM.
As for the DUMP , you can change the "mini dump " to "kernel memory dump " then analysis the file after BSOD .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
How to install a plugin on 64 bits windows 2008 server?
From the developer forum, I found a description which told me how to install a plugin on windows series system, but I only succeded intalling the plugin on 32 bits windows xp, couldn't install the plugin on 64 bits windows 2008 server. Any ideas or advices, men of genius? Thanks :-)
Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure. -
32 bit Oracle database 10g to 64 bit Oracle Database 11g on Windows 2008
Hi everybody,
I'm going to move and upgrade my 32 bit Oracle database server 10g to another 64 bit windows 2008 server.
New database server will be 64 bit Oracle database server 11g.
Somebody told me export import doesn't carry archieve logs therefore is there any way to move and upgrade the database without any lost?
Thanks for your helpI'm going to move and upgrade my 32 bit Oracle database server 10g to another 64 bit windows 2008 server.
New database server will be 64 bit Oracle database server 11g.
Somebody told me export import doesn't carry archieve logs therefore is there any way to move and upgrade the database without any lost?Yes, in export/import, you will create a new database and import. The question is why you want to prefer export/import?
is it source database 32bit is in different OS platform? If not directly after installation you can upgrade the database. using DBUA -
Windows 2008 64 bits and BO XI 3.1
Bonjour,
Que faut il faire pour installer BO XI sans problème sur un serveur windows 2008 64 bits virtualisé ? paramètres,composants 32 bits à installer ou à paramétrer ??
Merci de votre réponse
Cordialement
F. Bedouin
02.23.21.76.54Hi Francoise,
You should be aware that SDN forums are English spoken forums.
I don't know BO products and so cannot help you but I suggest that you rewrite your question in English for a better chance to get a useful answer.
Regards,
Olivier -
BO XI 3.1 SP2 error while installing in Windows 2008 ENT Server 32 Bit
Hi
We have windows 2008 enterprise edition 32 Bit SP2 , While installing BO 3.1 SP2 we are getting the following error.
"Some files could not be created.
Please close all applications, reboot Windows and restart this installation."
1.we do have enough space as well as we are installing it through administrator account.
2.I increase the virtual memory size from 2 GB to 4 GB, still same error.
3.we downloaded the software in two diffrent machines. We tried extracting the "exe" file in two machine but still getting the same error.
4.We dont have any firewall connected and windows firewall is off.
Is there BO 3.1 Sp2 is available for windows 2008 ent server 32-Bit?
Because In the download site there is Windows Server on IA32 32-bit.
is it the correct version?
Please help us to solve this problem
ThanksWe have opened a ticket for this. After subsequent discussion with the forum support person we have installed BO Enterprise 3.1 SP2 fixed pack 2.5 on the server (Windows Server 2008 SP2). On the client side, we have also installed BO Enterprise 3.1 SP2 fixed pack 2.5 and Live Office SP2 fixed pack 2.5.
Once we tried to use the Web Intelligence document based on OLAP Universe in excel through Live Office it gives the following error.
"Failed to get the document information. (LO 26315) A database error occured. The database error text is: Failed to set properties (The component Microsoft® OLE DB Provider for Analysis Services returned server error (Database 'Sales' does not exist.)). (WIS 10901)(6315)". -
Hello All,
Below is the server configuration,
OS: Windows 2008 R2 Enterprise 64 Bit
Version: 6.1.7601 Service Pack 1 Build 7601
CPU: 4 (@ 2.93 GHz, 1 core)
Memory: 12 GB
Page file: 12 GB
1. The actual utilization, be it a 15 minute sample, hourly, weekly etc, the utilization of real memory has never crossed 20% and the page file usage is at 0.1%. For some reason, the Pages/Sec>Limit% counter reports 100% continuously regardless of the
sampling intervals. Upon further observation, the Page Reads/Sec value is somewhere between 150~450 and Page Input/Sec is somewhere between 800~8000. Does this indicate a performance bottleneck? (I've in the interim asked the Users, App. Owners to see if they
notice any performance degradation and awaiting response). If this indicates a performance issue, please could someone help list down how to track this down further to which process/memory mapped file is causing it? and what I should go about performing to
fix this problem please?
p.s., initially the Security logs were full on this server and since page file is tied to Application, Security and System logs, this was freed up to see if this is causing the high page reads but this doesn't.
2. If the above does not necessarily indicate a performance problem, please can someone reference few KB articles that confirms this? Also, in this case, will there be any adverse effects if attempting to fine tune a server which is already running fine?
assuming App. Owners confirm there isn't any performance degradation.
Thanks in advance.Hi,
Based on the description, we can try to download Server Performance Advisor (SPA) to help further analyze the performance of the server. SPA can generate comprehensive diagnostic reports and charts and provides recommendations to help you quickly analyze
issues and develop corrective actions.
Regarding this tool, the following articles can be referred to for more information.
Microsoft Server Performance Advisor
https://msdn.microsoft.com/en-us/library/windows/hardware/dn481522.aspx
Server Performance Advisor (SPA) 3.0
http://blogs.technet.com/b/windowsserver/archive/2013/03/11/server-performance-advisor-spa-3-0.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Windows 2008 Enterprise 32-bit Random Blue Screen 0x000000C4
Hello,
We have a customer with IBM x3500 M3 server, Windows 2008 Enterprise SP2 32-bit, 24GB RAM (Domain, file and print server, rdp server roles installed).
Since December 2013, they have been experiencing random reboots (once or twice a month), so I ran debug on the memory.dmp and found that ntkrpamp.exe wa scausing this issue:
Debug on memory.dmp file for January, 2014:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Debug\MEMORY.DMP]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82233000 PsLoadedModuleList = 0x8234ac70
Debug session time: Wed Jan 8 08:24:19.852 2014 (UTC - 5:00)
System Uptime: 4 days 0:37:56.528
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 50, {f85c5048, 0, 823af2bf, 0}
Probably caused by : ntkrpamp.exe ( nt!CmpCheckKey+61b )
Followup: MachineOwner
9: kd> !analyze -v
* Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: f85c5048, memory referenced.
Arg2: 00000000, value 0 = read operation, 1 = write operation.
Arg3: 823af2bf, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 00000000, (reserved)
Debugging Details:
READ_ADDRESS: f85c5048
FAULTING_IP:
nt!CmpCheckKey+61b
823af2bf 394724 cmp dword ptr [edi+24h],eax
MM_INTERNAL_CODE: 0
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: System
CURRENT_IRQL: 0
TRAP_FRAME: 97b7d9ec -- (.trap 0xffffffff97b7d9ec)
ErrCode = 00000000
eax=00000000 ebx=e6b30024 ecx=19ef8172 edx=00000035 esi=a559e6a8 edi=f85c5024
eip=823af2bf esp=97b7da60 ebp=97b7da8c iopl=0 nv up ei pl zr na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010246
nt!CmpCheckKey+0x61b:
823af2bf 394724 cmp dword ptr [edi+24h],eax ds:0023:f85c5048=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 82280de4 to 822cb292
STACK_TEXT:
97b7d9d4 82280de4 00000000 f85c5048 00000000 nt!MmAccessFault+0x10b
97b7d9d4 823af2bf 00000000 f85c5048 00000000 nt!KiTrap0E+0xdc
97b7da8c 823b581a 01000001 009c4020 009c3f70 nt!CmpCheckKey+0x61b
97b7dabc 823b5e48 a559e6a8 01000001 00000006 nt!CmpCheckRegistry2+0x8c
97b7db04 823b086e 01000001 97b7dc60 8000a05c nt!CmCheckRegistry+0xf5
97b7db60 823b2fdd 97b7dbb4 00000005 00000000 nt!CmpInitializeHive+0x4c1
97b7dbd8 823b527d 97b7dc60 00000000 97b7dc4c nt!CmpInitHiveFromFile+0x19e
97b7dc18 823ab4c5 97b7dc60 00000000 97b7dc7b nt!CmpCmdHiveOpen+0x36
97b7dd14 823ab6fa 00000002 8232b5a0 00000002 nt!CmpFlushBackupHive+0x2fd
97b7dd38 8248acbd 8233513c 8e9462d8 822d8d4a nt!CmpSyncBackupHives+0x90
97b7dd44 822d8d4a 00000000 00000000 8e9462d8 nt!CmpPeriodicBackupFlushWorker+0x32
97b7dd7c 8240901c 00000000 8e585cb2 00000000 nt!ExpWorkerThread+0xfd
97b7ddc0 82271eee 822d8c4d 00000001 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!CmpCheckKey+61b
823af2bf 394724 cmp dword ptr [edi+24h],eax
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!CmpCheckKey+61b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrpamp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51da1840
FAILURE_BUCKET_ID: 0x50_nt!CmpCheckKey+61b
BUCKET_ID: 0x50_nt!CmpCheckKey+61b
Followup: MachineOwner
Based on google searches, driver verifier was recommended to be turned on to track driver with fault. I enabled verifier on all drivers, disabled automatic server reboot and today server crashed again.
here's the debug output of full memory.dmp file:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\windows\memory.dmp]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
System Uptime: 3 days 23:15:45.259
Loading Kernel Symbols
Loading User Symbols
PEB is paged out (Peb.Ldr = 7ffdd00c). Type ".hh dbgerr001" for details
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e2, af033d18, 2d0000, 0}
Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
Followup: MachineOwner
9: kd> !analyze -v
* Bugcheck Analysis
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
Arg2: af033d18, IRP address.
Arg3: 002d0000, User-mode address present as the value of an IRP field.
Arg4: 00000000
Debugging Details:
Page 6684ef not present in the dump file. Type ".hh dbgerr004" for details
Page 66a0f9 not present in the dump file. Type ".hh dbgerr004" for details
BUGCHECK_STR: 0xc4_e2
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
PROCESS_NAME: spoolsv.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 824ff5a7 to 822e19bd
STACK_TEXT:
eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
0549f880 00000000 00000000 00000000 00000000 0x77755d14
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!SrvNetWskSendData+c9
aad3183f 53 push ebx
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: srvnet!SrvNetWskSendData+c9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4dbabc34
FAILURE_BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
Followup: MachineOwner
Here's the output of mini dump file as well:
Microsoft (R) Windows Debugger Version 6.12.0002.633 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\windows\minidump\Mini021314-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Win2008E.DVD
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (12 procs) Free x86 compatible
Product: LanManNt, suite: Enterprise TerminalServer
Built by: 6002.18881.x86fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0x82214000 PsLoadedModuleList = 0x8232bc70
Debug session time: Thu Feb 13 08:29:07.272 2014 (UTC - 5:00)
System Uptime: 3 days 23:15:45.259
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck C4, {e2, af033d18, 2d0000, 0}
Probably caused by : srvnet.sys ( srvnet!SrvNetWskSendData+c9 )
Followup: MachineOwner
9: kd> !analyze -v
* Bugcheck Analysis
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 000000e2, IRP field is a user-mode address but Irp->RequestorMode is KernelMode.
Arg2: af033d18, IRP address.
Arg3: 002d0000, User-mode address present as the value of an IRP field.
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0xc4_e2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: spoolsv.exe
CURRENT_IRQL: 2
LAST_CONTROL_TRANSFER: from 824ff5a7 to 822e19bd
STACK_TEXT:
eff67a20 824ff5a7 000000c4 000000e2 af033d18 nt!KeBugCheckEx+0x1e
eff67a40 824fea32 af033d18 002d0000 9930e2e0 nt!VerifierBugCheckIfAppropriate+0x32
eff67a58 824fe7e0 af033d18 9930e2e0 99269b80 nt!ViIrpCheckKernelAddressForIrp+0x51
eff67a70 824f766d 99269b80 af033458 99269b80 nt!VfBeforeCallDriver+0x3d
eff67a90 82258931 af033fa4 af033fe0 99269b80 nt!IovCallDriver+0x1ef
eff67aa4 9b01271a eff67adc aad3183f bd99d34c nt!IofCallDriver+0x1b
eff67aac aad3183f bd99d34c eff67ad0 00000002 afd!WskProAPISend+0x67
eff67adc aad31490 9b01d9d0 af033d18 af033458 srvnet!SrvNetWskSendData+0xc9
eff67afc aad779d2 d5b93018 af033458 00000030 srvnet!SrvNetSendData+0x4d
eff67b14 aadb45bd af033368 aad75459 af033d18 srv!SrvStartSend2+0xa3
eff67b40 aad7522d af033fa4 eff67b84 824f7d4d srv!SrvFsdRestartReadAndX+0x127
eff67b4c 824f7d4d 00000000 af033d18 af033368 srv!SrvFsdIoCompletionRoutine+0x1d
eff67b84 822bb0fb 00000000 af033d18 eff67bf0 nt!IovpLocalCompletionRoutine+0x16e
eff67bb8 824f7b95 824f7a77 ccb4e7c8 eff67c44 nt!IopfCompleteRequest+0x11d
eff67c28 981a30d9 c3fbc2d8 ccb4e7c8 909c9dd0 nt!IovCompleteRequest+0x11c
eff67c4c 824f76be 909c9dd0 ccb4e7c8 9efe80e8 Npfs!NpFsdWrite+0x53
eff67c70 82258931 ccb4e838 ccb4e7c8 909c9dd0 nt!IovCallDriver+0x23f
eff67c84 8245ae25 9efe8114 ccb4e7c8 ccb4e838 nt!IofCallDriver+0x1b
eff67ca4 82427b13 909c9dd0 9efe80e8 00000001 nt!IopSynchronousServiceTail+0x1d9
eff67d38 8225ec96 909c9dd0 00000a39 00000000 nt!NtWriteFile+0x6fc
eff67d38 77755d14 909c9dd0 00000a39 00000000 nt!KiSystemServicePostCall
WARNING: Frame IP not in any known module. Following frames may be wrong.
0549f880 00000000 00000000 00000000 00000000 0x77755d14
STACK_COMMAND: kb
FOLLOWUP_IP:
srvnet!SrvNetWskSendData+c9
aad3183f 53 push ebx
SYMBOL_STACK_INDEX: 7
SYMBOL_NAME: srvnet!SrvNetWskSendData+c9
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: srvnet
IMAGE_NAME: srvnet.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4dbabc34
FAILURE_BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
BUCKET_ID: 0xc4_e2_VRF_srvnet!SrvNetWskSendData+c9
Followup: MachineOwner
I'd like to know how to fix this. Server has up-to-date firmware and drivers from IBM. It's also up-to-date on all windows updates.
Any help is greatly appreciated.
WillThis one may help.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023(v=vs.85).aspx
I'd test the RAM and or get with IBM on best method to verify the hardware and drivers.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
specific settings in Oracle RAC setup for performance evaluations?
Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
balancing)
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
Edited by: user2033016 on Jun 29, 2011 10:02 PMuser2033016 wrote:
Hi Everyone,
I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
The following machine configuration is used for Oracle RAC setup
Intel Core 2 Duo 2.66 GHz,
Ram :4GB.
OS : windows 2008 Server 64 Bit
Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
which documentation you have followed? -
Installing Oracle Application Server 10g 101202 on Windows 2008 64 bit
Hi All,
what i need to do is install this software like this:
installing Oracle Infrastructure to handel Sessions as db for oracle forms & reports
install Oracle Forms & Reports Service as Middle-Tire on the same machine in defirent home
configure my report server as i require it to work with rdf files in spechial folders
i have done this installation more than i can remember in Windows 2003 R2 SP2 32 bit
but for Windows Server 2008 i am facing some problem that there is no software avilable for 64 bit or Windows 2008 in Oracle Download Site
Spechilaly when my server is not itanum !
Can any one point me to the right download page if avilable or another solution for this problem
i don't think that oracle have stopped support for this product spechilaly when the reports generated by Oracle Report Service is far to good and fast with Oracle Database
Best Regards
IbrahimHi Ibrahim,
You should decide what you require.
32bit version can be installed on 64bit server and this should work fine (check the certification matrix for this).
The "problem" is that you would not gain any performance benefit from the 64bit server
If you want to have benefit you can upgrade the JVM to 64 bit version.
I did this 3 years ago and I do not remember exact steps though everything worked OK.
WARNING:
this can be unsupported, ask support to be sure
- Install the 32 bit version on the server
- Download 64 bit Java JRE/JDK and install it (well, you can search the same release as included in the AppServer or try newer one, 7 for example)
- later, reconfigure the appserver so it uses the version you've installed, OR Copy the everything from c:\progfiles\java\... to the directory OraHome\... (forgot exact directories)
try to search the forum, there had been a thread with the same question
regards, michael
Edited by: MickleSh on Sep 27, 2011 9:59 AM -
Oracle 11g installation issue on windows 2008 -64 bit
I have downloaded the Oracle DB Server software from http://www.oracle.com/technetwork/database/enterprise-edition/downloads/111070-win64-2008soft-084715.html:
Oracle Database 11g Release 1 (11.1.0.7.0)
for Microsoft Windows Server 2008 x64
win64_11gR1_database_111070.zip (2,014,141,880 bytes)
The installer always fails with the following:
Checking operating system requirements ...
Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
========================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
I am using Windows 2008R2 -64 bit and not Windows Vista. Any idea?Hi;
Oracle Certified versions for 2008R2:
Oracle 11.2.0.x
Oracle 10.2.0.5 (See Note 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
For Oracle 11gR1:
For MS Windows 2008, you can select either:
(11.1.0.7.0)
Microsoft Windows Server 2008 (32-bit) (1.9 GB)
Microsoft Windows Server 2008 x64 (1.9 GB)
For details see:
Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1? [ID 740926.1]
Statement of Direction: Oracle Database 11g Release 2 – Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Regard
Helios -
Windows 2008 Server R2 64 bit what version of server applications?
Hi, I'm new here please let me know what version of the OAS [Oracle Applikation Server] is required for the server running Windows 2008 Server R2 64 bit? Server wants to use the forms. I will be grateful for links to the version.
I greet.Hi,
As far as I can see OAS is not supported on Windows 2008 R2. You can have a look here:
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
10gR3 - http://www.oracle.com/technetwork/middleware/ias/downloads/oracle-soa-certification-r3-10-131499.xls
10gR2 - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Regards Peter Lorenzen -
Windows 2008 server 32 bit support
Hello,
Is MaxDB officially supported for Windows 2008 server 32 bit platform?
Thanks,
JoseJose Lopez wrote:>
> OK, then perhaps mention specifically W2003 in the download link?
Hmm... about what download link are you talking?
The one in the download area here in SDN?
If so, then this is not relevant for SAP customers as they should get all their software via DVD delivery or the Service Marketplace downloads!
In the service marketplace download sections there are no restrictions given, since the Product Availability Matrix (https://service.sap.com/pam) contains all the release/support information.
In general, the PAM is the one single place to check for supported versions.
regards,
Lars -
Windows 2008 server (64 bit) setup not starting?
To all,
Windows 2008 server (64 bit) setup not starting? downloaded v17228-01-2of2 and v17228-01-1of2? Any ideas why the installer not starting?Installing oracle database 11g( 64bit) on a windows 2008 server (64bit). I do not get the setup tool to start
Downloaded
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 1 of 2) V17228-01 Part 1 of 2
and
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 2 of 2) V17228-01 Part 2 of 2
Edited by: user731811 on Oct 14, 2010 1:11 PM -
EPMA 11.1.2.1 config on windows 2008 R2 64 Bit
Have issue's with EPMA 11.1.2.1 config on windows 2008 R2 64 Bit ,
RDBMS : SQL 2008 R2 64 bit (pre config SQL tasks compalted)
IIS 7.0
IPV 6 disabled to resolve binding issue
EPMA services are up and running but
Diagnostic Log:
Following components are failed in the diagnostic log, all of them have same message.
EPMA service is working
AppMgrLoadAdf
DimEditorLoadAdf
EnumApplications
EnumDataSyncs
EnumDimensions
Launch external checker with next command: D:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=D:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working.
Error in Workspace for EPMA:
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with POST method: 503
Recommended Action: Check application is started.
Any suggestion are appreciated, i am running against wall on this error.
ThanksCheck the logs for "Hyperion EPMA Web Tier - Web Application" and "Hyperion EPMA Data Synchronizer - Web Application"
e.g. <MIDDLEWARE_HOME>\user_projects\<instancename>\diagnostics\logs\services - HyS9EPMAWebTier-sysout.log, HyS9EPMAWebTier-syserr.log, HyS9EPMADataSynchronizer-sysout.log, HyS9EPMADataSynchronizer-syserr.log
Cheers
John
http://john-goodwin.blogspot.com/ -
Installation 64-bit client software and ODAC on windows 2008 r2
Welcome,
I new on Oracle. I need to create a linked server from sql 2008 r2.
Where i can find latest (current) 64 bit 11g r2 client and odac ?
Is it
https://updates.oracle.com/ARULink/PatchSearch/process_form?bug=10404530 Oracle 11.2.0.3.0
+ Patch 14828076: ORACLE 11G 11.2.0.3 PATCH 13 BUG FOR WINDOWS (64-BIT AMD64 AND INTEL EM64)
and
ODAC http://www.oracle.com/technetwork/database/windows/downloads/index-090165.html
http://download.oracle.com/otn/other/ole-oo4o/ODAC1120320_x64.zipHi;
Please review:
FAQ Installing the Oracle Client and ODAC Components on Windows [ID 1319067.1]
Where to Find The 11gR1 64-bit Oracle Data Access Components (ODAC)? [ID 865708.1] <<check section 2 part
Regard
Helios
Maybe you are looking for
-
How to include implicitely referenced class in swf?
I have a setup where livecycle returns an array filled with instances of class MyClass with, among others, property aName. MyClass implements MyInterface which has an accessor name, in the implementation MyClass name handles aName. A component list
-
i have an album named Just 4 Xmas and this album include songs of various singers . when i go to album tab in music on ipad , the album splits to many parts . Still be a Just 4 Xmas but in different singers . It doesn't occur in ios 6 .i want all the
-
Organizing Music and Movies etc...
Hello, I was wondering if anyone knew a way to seperate the "Movies" folder from the "iTunes Music" Folder. I have just recently started playing with importing movies to iTunes and i like to keep everything organized on the file level just incase i n
-
Uploading video/image files from mobile
Hello I need to develop wap website that will allow to upload video and image files from cellphone to server. The question is what is the best java technology to be used for this case if i am interested in website-like and not application-like soluti
-
I just installed iOS lion, now iPhoto cannot show photos on my iPhone.
Recently, I installed i os lion and try icloud. Now in my iphone I have pictures that are not shown when iphoto runs. It doesn't even show my iphone in display. please advise, I am in a hurry thanks