Windows 2008 64 bits and BO XI 3.1

Bonjour,
Que faut il faire pour installer BO XI sans problème sur un serveur windows 2008 64 bits virtualisé ? paramètres,composants 32 bits à installer ou à paramétrer ??
Merci de votre réponse
Cordialement
F. Bedouin
02.23.21.76.54

Hi Francoise,
You should be aware that SDN forums are English spoken forums.
I don't know BO products and so cannot help you but I suggest that you rewrite your question in English for a better chance to get a useful answer.
Regards,
Olivier

Similar Messages

BPC 7.5 SP4 Support for Windows 2008 R2 and SQL 2008 R2

The release notes for BPC 7.5M SP04 state that support has been added for both Windows 2008 R2 and SQL 2008 R2.
For SQL 2008 R2, there is nothing in the feature pack described as "SQL 2005 Backward Compatibility Components" - which was a required piece for BPC 7/7.5 on SQL 2008. Is the SQL 2008 version still a requirement, or does BPC 7.5 now not need the Backward Compatibility components?
Also, the ReprotViewer executable that is packaged with BPC 7.5 is the one for SQL 2008- will that work when installing SQL 2008 R2?
thanks,
Tony DeStefanis
Column5 Consulting

Hi,
we have the same environment (BPC 7.5 SP4 on Windows 2008 R2 64 bit and SQL Server 2008 R2 64bit).
we are developping our application-set and for the moment we have no problem.
regards
massimo

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2

Hi
Trying to obtain information on compatability of SAP R3 4.5b running on Windows 2008 R2 and SQL 2008 R2 ?
I understand that SAP may not support this? But would it actually work? Assuming we have a third party supporting it?
Jay

Hi Jay,
You may check the support in PAM http://service.sap.com/pam.
Ideally SAP shall not support this environment.
Reason being:
1) SAP kernel for R3 4.5b not available for windows 2008 R2
2) Compatible database library not available for R3 4.5b on MSSQL 2008 R2.
with above 2 reason you shall not be able to install R3 4.5b on Windows 2008R2 with MSSQL 2008 R2 database.
Regards,
Deepak Kori

DAC 10.1.3.4.1 Server on Windows (64 bit) and Linux x86 (64 bit)?

Hi Friends,
Please confirm wheteher Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 Server is supported on
Windows (64 bit) and Linux x86 (64 bit)
Because from edelivery.oracle.com i could see the downloads only for windows and Linux and not specified as 32/64 - bit
so will it mean that the same dump is used for both 32 and 64 bit
1) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Microsoft Windows (V16377-01)
can the above dump is used for both 32 and 64 bit windows?
2) Oracle Business Intelligence Data Warehouse Administration Console 10.1.3.4.1 for Linux x86 (V16378-01)
can the above dump is used for both 32 and 64 bit Linux?
The reason is because for OBIA 7.9.6.3 configuration both the Informatica Power Centre and DAC Server should co-exist
and i could see seperate installer for 32 and 64 bit for both Windows and Linux whereas i couldn't see it for DAC Server
Please confirm .
Regards,
DB

It is supported on both platforms. With Linux however, if you have any issues you can to install in a windows environment, then copy over the folder structure. Also, you can possibly run into issues running the setup.exe on 64bit windows. When you open the install directory, go to dac/disk1/install and run the executable for win32. win64bit can return an error where it says it cannot create certain temp directories. It is a known java bug you can find in the support website.
Edited by: user12838563 on Jul 13, 2011 11:35 PM

Is iTunes 10.5 beta available for windows 32 bit and where is it found?

New to the developers site. Can someone tell me if iTunes 10.5 beta is available for Windows (32 Bit) and where it can be found for download? Thanks.

You're out in the public forums here, bryan. Best not to ask questions like that here ... it's a breach of your NDA. Try the developer forums instead?
http://developer.apple.com/devforums/

MPIO versions for Windows 2008 SP1 and R2?

Where can I find a list of the latest versions numbers of MPIO for Windows 2008 SP1 and R2?

Hi,
Do you mean the latest version of mpio.sys file?
After search I think the latest version of mpio.sys is 6.1.7601.21687, Date is 19-Mar-2011.
For all supported x64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
Mpio.sys
6.1.7600.20928
156,544
19-Mar-2011
07:34
x64
Mpio.sys
6.1.7601.21687
156,544
19-Mar-2011
07:45
x64
For all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
Mpio.sys
6.1.7600.20928
353,664
19-Mar-2011
06:52
IA-64
Mpio.sys
6.1.7601.21687
353,664
19-Mar-2011
06:50
IA-64
For more information please refer to following MS articles:
"0x000000D1" Stop error occurs in the Mpio.sys driver in Windows Server 2008 R2
http://support.microsoft.com/kb/2511962
"msdsm.sys” and “mpio.sys" files version after SP2 installation
http://social.technet.microsoft.com/Forums/en/winserverClustering/thread/c18b5111-9888-4aba-bda5-22a54b7227d9
Lawrence
TechNet Community Support

Windows 2008 Server and HP Color LaserJet 2605dn Driver Issue when Sharing Printer

I have a HP Color LaserJet 2605dn printer that I need to setup on a Windows 2008 server. I need the server to act as a Print server, but I have been unable to get any drivers to load other than the 64 Bit Universal drivers. Because most of the company uses XP (32 and 64 bit), I also need to load those drivers under additional drivers; however, I have been unable to load them, when I point to the INF file (any of the 10 that unzip from the driver package), it says it is not for this printer. I have even tried the generic 32 bit PS and it says the same thing. Any ideas on what I am doing incorrectly or where to get the drivers that I need?
Thanks,
Gary

Hello, I have the same problem. For the 2605 Printer is only the universal print driver available. Is seems that HP is to be lazy about making new 2008 driver.

Microsoft Windows 2008 Server and RDC

hi:)
We have a fairly serious problem. Many of our customers have a Microsoft Windows Server 2003 running our ASP web solution on that machine. In this web solution we use RDC (crystal) to show reports on the net, which works perfectly. But now a couple of our new customers have installed Microsoft Windows Server 2008 32 bit and 64 bit version. But when we are showing these reports on a Windows Server 2008, the result is not correct. It show a completely wrong result in the reports. This meaning showing 4 timers the records it should do.
Do u support Windows Server 2008 32 bit and 64 bit with RDC (crystal) ?
Have anyone experienced the same problem?
Sincerly Jan Tovgaard, Egdatainform, DK

Hi Jan
CR XI, CR XIR2 and CR 2008 have not been tested with Microsoft Windows Server 2008 and MS Windows Server 2008 would be added to the supported platforms Guide when it is done.
Please refer to the Supported Platforms Guide for CR XI, CR XIR 2, CR 2008 for more information.
Hope this helps!!!
Regards
Sourashree

Windows 2008 Server and Windows 8 clients

Hey Guys,
I have had this problem for sometime now and really need a solution. I have Windows 2008 Enterprise Server running about 200+ terminal services clients. All Windows XP clients are fine, Windows 7 clients have issues when they get an updated version of
remote desktop client(to solve the issue we simply rollback the update), Windows 8 clients cannot connect and use out remote app. The issue stems from the newer version of remote desktop client (on windows 7 and embedded in windows 8) cannot connect to our
terminal server and generates an error and immediately disconnects. The error says "
Your computer can't connect to the remote computer because an error occurred on the remote computer that you want
to connect to
So my questions are, how can i update my Windows 2008 Terminal server version to support these clients, or do u have migrate to Windows 2012? Or is there a solution to my current problem which will allow my client to connect and use the remoteapps?

Hi,
Thank you for posting in Windows Server Forum.
Please follow the below steps and verify result.
LAN manager authentication level settings (Local security policy->Local Policies->Security Options->Network Security: LAN Manager Authentication level).
Try to change it to "Send NTLMv2 response only"
Snap:
If still face the issue please install this Hotfix.
RDS client computer cannot connect to the RDS server by using a remote desktop connection in Windows
http://support.microsoft.com/kb/2752618/
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Interesting problem with RAID, Windows 2008 server, and Ubuntu

sooooo, i got the system working and linux loved it. just adored it.
however, Windows did not. Windwos 2008 server hard locks from time to time. i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
Ubuntu 9.04 server, however, just took it and made it work great.
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable. Then i went back and redid the raid, and it did the original error.
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate. I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
My settings are as follows:
SATA Controller 0-5 enabled
NVRAID- enabled
PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
MAC LAN- same as above
MAC LAN1- has master disabled, but the other stuff is the same
Serial port A is on AUTO, B is disabled, and floppy is disabled.
Option Rom is PFA relocation.
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
thanks guys.

Quote
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
Turn off onboard raid ctrl 1st. There are conflicting.
Quote
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
Known issue, partition mess:
http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
Quote
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
What's the BSOD error? Are you using XP installation disk with included SP3?

PI 7.0/7.1 Installation on Windows 64-bit and MaxDB

Hi Folks,
We have an installed PI in one server on Windows 2003 using Oracle DB (licensed).
We wish to install PI in another server on Windows 2003 64-bit but this time it will be MaxDB.
I've tried searching and found SAP NetWeaver Process Integration 7.1 on Windows_Oracle.pdf.
Any advise please on how to go about installing PI 7.0/7.1 on Windows 64-bit:MaxDB. Thank you!
Regards,
Lex

Hi Lex,
you cannot use the SAP DB (=old name of SAP MaxDB) package you found on the old SAP DB site for your PI installation for various reasons:
a) SAP DB version 7.4 is VERY old, it is no longer supported since the end of 2006 !
b) typically, a SAP application and its DBMS are installed using SAPinst
Try checking the SAP Software Distribution Center (incl. PAM: Product Availability Matrix) on the SAP Support Portal. You can also get the correct software there (when you're an official SAP customer).
Regards,
Roland

DHCP Failover in Windows 2008 R2 and Windows 2012 R2 Environment

Hi Everyone,
We are trying to implement DHCP failover in our environment. Our IT Infrastructure consists of 4 – windows server 2008 R2 servers and 7 – Windows Server 2012 servers; 1 Main Office with 2 – DC’s and 9 branch/remote offices with one DNS server in every remote
office. All the DNS servers have 2 scopes defined on them for VOICE and Data with different Subnets.
What would be the best method to implement failover in 2008 R2 – Windows Failover Cluster or Split scope? And how to implement DHCP Failover in Windows Server 2012 R2?
Please let me know if you need more information.
Thank you for your help!
-kN

Hi,
if you can choose between 2008 R2 and 2012 R2 than go with 2012 R2 it is easy to create a DHCP failover there. Actually that is one of the new features of Windows 2012.
With Server 2012 you setup your fist DHCP server with the scopes you want to setup. Than you install the second 2012 server with DHCP role and authorized. If you have done this you going back to your first server, where you already configured your scopes.
Now right click onto the scope you want to setup for failover and select 'Configure Failover'. You can than set it up as kind of split scope (Load balance Mode) or as real fail over setup (Hot Standby). In Load balance Mode you can configure the balance of
IP addresses between the both servers, like primary has 60% IP addresses and secondary has 40%.
With Server 2008 R2 the easiest configuration is split scope. But here it depends how many IP leases you will max have and if you can absorb if one of the server is going down. Lets say you have 50 DHCP leases max, than sure, set it up as split scope. But
if you have 200 DHCP clients, than I would go with failover cluster. At the end it depends on your environment.
Sven

Data Protection Manager 2012 on Hyper-V Windows 2008 R2 and NAS connectivity

Hi, we currently use Symantec Backup Exec 2010/2012 on Windows 2008 R2 servers storing the data on two LAN-connected NAS servers. As part of our MS licensing package, we have obtained System Center 2012. I'm seeing if DPM can replace our BE software, but
I'm running into a major hurdle, I can't connect (Add) either of the NAS machines. I see on DPM posts where you need to have a physical connection to the NAS (iSCSi or fiber channel) not an option on the NAS (Thecus N8800 & N8900 (no ability to add cards)
and SMB 3.0 (appears to be a Windows 2012-only option ... I dread 2012 and don't want to move to it right now). Can my virtualized (hyper-v) W2008 R2 server see a non-connected NAS and if so, how do I pull this off.
Thanks

Hi
DPM needs local storage to connect to. you cannot use a NAS or USB device to backup to like with other backup software.

Installed windows 32 bit and 64 on same computer

windows 7 premium and 7 2010 pro plus / 32/64 bit activated installed on same Comp.
This question was solved.
View Solution.

Hi,
You must uninstall 32 bit version before you can install 64 bit version. Your machine MUST run 64 bit Operating system. Please also consider this:
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/need-to-uninstall-ms-offi...
and this:
http://technet.microsoft.com/en-us/library/ee681792.aspx
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Exchange 2010 , Windows 2008 R2 and framework 3.5 SP1

Hi all ,
I have questation about protection exchange server 2010 with framework 3.51 SP1 running in the windows 2008r2 serveru . The DPM server is instaled in the windows 2012r2 server and supported version in this os is 2012R2 RU5 . After install i upgrade client
in the exchange serveru . and i the DPM console is status OK ? It is Ok ??? Or which client is running without fw 4.0 ? In another server I try run c:\Program Files\Microsoft System Center 2012\DPMAgentInstaller_KB3021791_AMD64 and this installer do not require
fw 4,0 .....
thanx
Falcon

Hi,
DPM 2012 R2 requires at least .NET Framework 4.0 and .NET Framework 4.0 works with Exchange 2010 SP3.
For more detailed information, please refer to the articles below:
Setup prerequisites
https://technet.microsoft.com/en-us/library/hh758058.aspx?f=255&MSPPError=-2147217396
Exchange Server Supportability Matrix
https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows 2008 64 bits and BO XI 3.1

Similar Messages

Maybe you are looking for