Windows 2008 DNS & DHCP configuration steps for 11gR2 GI install with GNS

Hi,
I have windows 2008 R2 server with DNS & DHCP services installed. I am planning to install 2 node RAC with GNS option.
The problem is i could not find any document to setup the windows 2008 DNS server for the below steps.
a. Configure GNS VIP : add a name resolution entry in a DNS for the GNS virtual IP address in the forward Lookup file.
gns-server IN A <virtual_IP>
where gns-server is the GNS virtual IP address given during grid installation.
b. Configure the GNS sub-domain delegation: add an entry in the DNS to establish DNS Lookup that directs the DNS resolution of a GNS subdomain to the cluster.
clusterdomain.example.com. NS gns-server.example.com.
where clusterdomain.example.com is the GNS subdomain (provided during grid installation) that you
delegate and gns-server.clustername.com resolves to GNS virtual IP address.
I am aware that this configuration steps has to be taken care by the System administrator. Here is what he tried and the results.
My SA was able to Configure GNS VIP in the DNS and the Nslookup works fine for this.
When he Configures the GNS sub-domain delegation the nslookup fails when trying to resolve the SCAN name.
Any step by step tutorial for this windows 2008 DNS & DHCP configuration for Oracle GNS setup would be highly appreciated.
Thanks,
Ashok Kumar.G

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Similar Messages

Remote Access to Windows 2008 R2 Server configured with local IP

Hello,
I have a Windows 2008 R2 Server configured with local IP (e.g. 192.168.1.115).
Please how can I access it remotely outside its local domain through (remote desktop connection).
Thank you.
Tony.

Hi Tony,
Based on your description, you would like to connect to the Windows 2008 R2 server via remote desktop connection.
So you need to enable remote desktop on the Windows 2008 R2 server if it is not already.
1.Install and configure the Remote Desktop Session Host role service in the Windows 2008 R2 server.
2.Add related user to the Remote Desktop Users group in the Windows 2008 R2 server.
3.Configure remote desktop connection in the Client.
Also, due to you would like to access it remotely outside the domain, so you will need a VPN connection or a port forward to connect through.
For more details, please refer to the guide below,
Installing and Configuring Remote Desktop Session Host
http://technet.microsoft.com/en-us/library/dd883253.aspx
Allow Remote Desktop connections from outside your home network
http://windows.microsoft.com/en-IN/windows7/allow-remote-desktop-connections-from-outside-your-home-network
Best Regards,
Tina

MORE DETAIL ABOUT MY problem (Configuration Steps for Oracle Forms installation)

OS:WINDOWS 2000 SERVER
DB:8I
FORMS:6I
I WANT TO TEST MY FROM TO RUN ON THE WEB ONLY TEST BY (RUN FROMS IN THE WEB)
BUT I CAN'T DO CONFIGRURATION STEPS (VIRTUAL PATH)
WHERE I CAN DO THIS CONFIGRATION
Configuration Steps for Oracle Forms installation of 06:05:38 2002/10/18
This file gives details of the configuration steps done for you by the installation process
(marked '[INFO]') and of any actions you need to do manually (marked '[ACTION]'). Please read
this file and perform the requested actions.
[ACTION] If you are installing in a new Oracle Home, please reboot the machine after the installation.
[ACTION] Please configure the following virtual path with your web listener: /dev60temp for
physical directory F:\devnt\tools\web60\temp.
[INFO] NT service Oracle Forms Server [Forms60Server] has been created and started for
the Forms Server.
[ACTION] Please configure the following virtual path with your web listener: /forms60java for
physical directory F:\devnt\FORMS60\java.
[ACTION] Please configure the following virtual path with your web listener: /dev60html for
physical directory F:\devnt\tools\web60\html.
[ACTION] Please configure the following virtual path with your web listener: /dev60cgi for
physical directory F:\devnt\tools\web60\cgi.
[INFO] An internet shortcut to run a standard test form, or any form of your choice, has been
created for you in the Oracle Forms program group.
[ACTION] Please configure the following virtual path with your web listener: /jinitiator for
physical directory F:\devnt\JINIT.

Hi Guys,
Any help on this request will be very helpful.
Thanks,
Ashok Kumar.G

Give me the Configuration steps for intercompany billing and third party s

Hi Gurus,
Give me the Configuration steps for intercompany billing and third party sales and give me a brief description with examples.
Regards,
YSR

Dear YSR
Check the links
[Cross Company Configuration|http://help.sap.com/bp_bblibrary/500/Documentation/J62_BB_ConfigGuide_EN_DE.doc]
[Third Party Without Shipping Notification|http://help.sap.com/bestpractices/BBLibrary/html/J55_ThirdPartyWOSN_EN_US.htm]
Third party order processing is as follows:
Assume three companies X, Y and Z
X - The company,
y - The customer
Z - Vendor
When ever X gets a PO from Y to supply some goods, X has an option of either manufacturing those goods or procuring those goods.
If he is procuring the goods, there are two methods that are generally followed:
Method 1)
After receiving the PO from Y, X creates a sales order against Y.
Now at the same time he also creates a PO to a vendor Z to produce the goods
Z produces the goods and supplies to X
X receives the goods from Z
Then X delivers the same goods to Y.
After that X invoices Y and Z invoices X.
Note : Here there is no direct/ Indirect relation between Z and Y.
This process is known as Trading Process. and the Material here is created with Material type HAWA.
The other method is a Third party order processing method:
Here the glaring difference is that instead of Z supplying the material to X and X in turn supplying the same material to Y.
X authorizes Z to supply the material to Y on his behalf and notify him once the delivery is complete.
Now Z supplies the material to Y and acknowledges the same to X.
Z will send a copy of delivery acknowledgement and invoice to X.
After receiving the delivery confirmation and invoice from Z, X has to verify the invoice and this process is known as invoice verification and is done in SAP through Tcode MIRO.
The next step for X is to create an invoice and submit to Y
Only after the invoice verification document is posted then only X can create an invoice for Y.
This is the business flow that is followed for third party order configuration.
There are few steps that have to be configured to enable the system to function as mentioned above.
Step1)
If you are always followwing a third party process for a material then you have to create the material using item category group BANS.
The procument type should be marked as External procurement (F) in MRP 2 view of the material master record.
if you are not always allowing third party order processing then u can create a material master record with item category group as NORM and the procurement type should be marked as ( X) meaning both types of procurment ( in house manufacturing and external procurement).
Step 2)
the item category in the order should be manually changed as TAS.
For that you need to confugure the item category determination
ord type + item cat grp + usge + Hiv level = Item cat + Manual item cat
OR + NORM + + = TAN . + TAS
OR + BANS + + = TAS
Step 3)
make sure that during the item category configuration for TAS you need to mark relevnat for billing indicator as F
Step 4)
The schedule line cateogry for this type should be CS.
make sure that you mark subsequent type as NB - purchase requisition in this schedule line category as this will trigger the purchase requision order immediately after the creation of the sales order and the PO to vendor is created against this purchase requiesion.
thanks
G. Lakshmipathi

Configuration steps for split valuation

Dear Gurus,
I have completed following steps in MM configuration.
A.Defining Enterprise structure
A1. Defining controlling areas
A1. Defining Plants
A3. Defining Storage Locations for Plants
A4. Defining Purchase Organization
A5. Assigning Purchase Organization to Plants
A6. Assigning Plants to company code
A7. Assigning purchasing organisation s to company code
A8. Assigning purchasing organisation s to plant
A9. Creating Purchase Groups
Now I am facing problem in Split evaluation.I am not able to create create valuation class & valuation type.
What is the role of split valuation ?
What are the configuration steps for split valuation?
Can anybody guide me on this/
Thanks & regards,
NB

Hi NB
A fruit company is importing apple from America & Europe. The price of apple imported from America is Rs.10 per Kg. The apple imported from Europe is Rs.15 per Kg. How do they maintain material master for Apple with two prices..?
A chemical factory produces methanol. The cost of methanol produced internally is Rs.20 per liter. But due to high production they purchases methanol from outside at Rs.30 per liter. How do they maintain material master for methanol with two prices..?
Petrol bunks have different varieties of petrol. Hi speed petrol costs Rs.52 and ordinary petrol costs Rs. 47. How do they maintain material master for petrol with two prices..?
If your answer is to maintain two material codes i.e. one for apple-America & one for apple-Europe then you are wrong. If your answer is Split Valuation, then you are right.!
Steps:
We have to activate split valuation if you want to use split valuation. But by default split valuation is Active.To activate the split valuation:
tcode OMW0.
To differentiate between material stocks, you must define valuation category and valuation type.
The valuation category specifies which criterion should be used as the basis for differentiating between the various partial stocks.
The valuation type specifies an individual characteristic of a partial stock.
Go to tcode OMWC, create global types, then global category. assign global types to global categ. and then attach them to valuation area(plant).
regards
Yogesh

Configuration steps for Infotype 0315

Hi ,
My client need to maintain Time sheet data for there employees.for that they need to maintain Infotye 0315.
Pls let me know what is infotype 0315 (Detailed description) & what are the configuration steps for infotype 0315.How to configure that Infotype .What are the pre-requsite steps to configure infotype 0315.Kindly
let me know
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Edited by: Rob Burbank on Jan 17, 2011 4:22 PM

Dear SC,
Infotype 0315 is to make default values in terms of cost center , profile...etc...which will be picked up when you enter time data in CATS.....you can make the infotype called included in infogroup and get it filled at the time of performing initial action......
Configuration steps are for the CATS profile and other things not for infotype 0315...
regds

ESS/MSS Configuration steps for ECC6.0 EHP6

Hi Experts,
Please provide ESS/MSS Configuration steps for ECC6.0 EHP6.
Thanks.

Hi,
can u please share link with me.?
if you have any other configuration documents please provide me.
Thanks in advance.
Regards,
Meghal Shah

Windows 2008 R2 DHCP management pack

i got the windows 2008 R2 DHCP management pack installed but one of my dhcp server is 2008. Will this mp monitor 2008 DHCp server?
one of my dhcp cluster went down and service was stopped but there was no alert .
what is the problem?

Different between true and false option of “Alert only if startup type is automatic " when DHCP service is stopped
DHCP service start up type
“Alert only if startup type is automatic "
automatic
not automatic
Yes
Generate Alert
No Alert
No
Generate Alert
Generate Alert
Roger

Configuration steps for customer service module

Hi All,
I am SD consultant added with new resposiblilities of CS. My Client is a service industries. I need to learn basic process and configuration step for CS regarding service order creation, planning, costing and settlement.
Wainting for positive reply,
Thanks & regards,
Sudhir

Hi,
Please read the PLM material with series
PLM301,
PLM305
PLM310
These three books will give details completely on CS module
regards,
santosh

Configuration Steps for Parameter Effectivity

Dear all,
Kindly guide me the for the Configuration Steps for Using Paramenter Effectivity in ECM
Thanks,
Ishwar J

Check [Link|http://help.sap.com/saphelp_46c/helpdata/EN/d4/09c0cfa3a811d189be0000e829fbbd/content.htm] & <REMOVED>
Dear SN,
The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are advising is copyrighted material that should not be distributed without the authors authorization.
By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN according the rules of engagement and the agreement you made when joining this community. This is NOT the expected behaviour.
Do NOT continue to advise or distribute such material.
-Paul
Moderator
Edited by: Paul Meehan on Sep 14, 2009 10:06 AM

Windows 2008 R2 DHCP scope change - Netsh Exec not working

OK, there seems to be a disconnect between Netsh documentation and how it actually works. We are in the process of re-addressing ALL our DHCP scopes (joys of a buy-out) and using the steps outlined in numerous MS articles and Blogs etc... we should
be able to use "Netsh dhcp server scope 192.168.1.0 dump > scope1.cfg" then modify the cfg file with the new scope address (i.e. change all 192.168.1. to lets say 10.10.5.). Then use netsh exec scope1.cfg (yes, the file modified) to
create the new scope which would contain all the "stuff" the current scope has (reservations, options, etc).
Well, all we get is the response "The following command was not found: |".
Environment is as follows:
Account is a domain admin
working on a RDP session on the DHCP server
Server is Windows 2008 R2 (current functioning DHCP server)
Using administrative CMD (elevated)
have tried changing context into Netsh | DHCP | Server and default CMD - all "no go"
supporting link from MS: http://technet.microsoft.com/en-us/library/cc772372(v=ws.10).aspx#BKMK_1
There's a lot of discussions around this, but I haven't seen any response that says how to actually do it. export/import won't work for us since we have to update the scope info. With almost 100 scopes to update, we really need this functionality!
(or similar method)
Any assistance would be greatly appreciated.

OK... It seems the issue is with the dump file. I actually got exec to run once with a dump file which wasn't modified.  The stupid part is it only ran one time, I could not duplicate it.   Since
I've beat this thing to death and no one could offer any assistance (Hello MS?), I'm not wasting any more time on it.   Luckily, I was able to figure out an alternate method.
Looking at the dump file I realized all the lines are just a straight NetSh commands, which means all I needed to do is grab the lines and preface them with NetSh. Like this...
for /f "tokens=*" %a in ('type scope.cfg ^| find /i "dhcp"') do NetSh %a
where scope.cfg is your dump file.   This runs perfect and seems to be the exact thing that exec should be doing. I did flip the "SET STATE 1" to "0" so the scope was deactivated (Don't forget to run it in an elevated
prompt).
Hope this helps someone else so they aren't spending days for nothing!

Configuration steps for ICM and ICF for WebDynpro

Hi Experts :
I am new to WebDynpro, I have created one application (a very simple one, with assistance from net). But when I am trying to run this one, I can oly see "Can not display this page". I think there might be some ICM and ICF configuration is required for this.
Can any one, help me regarding this.
Thanks,
Kuntal

>
Kuntal Nandi wrote:
> Need to add the IP address in host file.
You know you really shouldn't need to do that. Sometimes you see that suggestion if this is a temporary sandbox or trial system installation; but for a real ABAP AS, it would be rediculous to go around to every client machine and add the IP address to the host file. The real solution is to have your network administrators do their job and setup a proper DNS entry for the server.
Telling someone that they should add their server IP address to every client's host file is like telling someone with an amputated arm they just need to put a bandaid on it. Just silly!
So the short answer is that the majority of these steps should be on the server. There are some suggested settings for your browser to control security and error reporting; but the critical configuration steps on the server are all listed in the help document I linked to earlier.

Configuration steps for Extended Classic Scenario

Hi All,
Could you please let me know what are the configuration steps required for extended classic scenario.
Thanks in advance

Hi,
Important Settings that Determine the Extended Classic Scenario
The following settings are required for the extended classic scenario:
u2022 At least one backend materials management system and accounting system is connected to the SAP SRM system and defined in the configuration setting Define Backend Systems.
u2022 Product categories from the backend procurement system are replicated and used in the SAP SRM system.
u2022 The target system for each product category is the backend system in the configuration setting Define Backend Systems for Product Category. Optionally, BADI BBP_DETERMINE_LOGSYS is implemented to determine the backend system.
u2022 The extended classic scenario is activated in the configuration setting Activate Extended Classic Scenario. Alternatively, BAdI BBP_EXTLOCALPO_BADI is implemented to control the extended classic scenario based on customer defined rules.
u2022 If the backend system is an SAP R/3 version lower than 4.6B, you must define local purchasing organizations and purchasing groups.
u2022 If the backend system is an SAP R/3 version 4.6B or higher, you need to map the purchasing group used in the purchase order to the backend purchase group in one of the following ways:
u2022 Use a backend purchasing organization and purchasing group in the shopping cart and purchase order.
u2022 Use BAdI BBP_PGRP_FIND to determine a backend purchasing group in the shopping cart.
u2022 If a local (created in SAP SRM without reference to a backend system) purchasing group and purchasing organization are used, then a valid backend purchasing group is assigned to the RFC user that created the backend purchase order. This assignment is made in the backend system using user parameter EKG in Transaction code SU01.
u2022 Implement the user exit of the BAPIs BAPI_PO_CREATE1 (EXIT_SAPL2012_001 and EXIT_SAPL2012_003), and BAPI_PO_CHANGE (EXIT_SAPL2012_002 and EXIT_SAPL2012_004) to determine the purchasing group with a customer- specific logic.
This is for your additional information.
Hope this helps.
Regards,
Vikas

Configuration Steps for Decentralized Adapter Engine

Hi all,
What all configuration steps are required to make Adapter Engine as
Decentralized AE.
I have made required changes in SLD DataSupplier in Visual Administrator.
what more configurations have to be done? On SAP XI Server and Decentralized
Adapter Engine.
With regards
Prasad

Prasad,
After configuring SLD data supplier in Visual Admin, you need to the following
1) Configure the gateway service for the central integration server on adapter engine host.
2) Perform Initial adapter engine cache refresh
3) Trigger data transfer to SLD
4) Check the connection parameters in exchangeProfile
5) Create HTTP destination pmistore in java environment
you have to go through all these tests for decentralized adapter engine. If you have XI configuration guide, it has all these steps in detail for you to configure
--Archana

Configuration steps for EBP to SUS

Hi All,
Can anybody please give EBP to SUS configuration steps which is very urgently required .
Thanks in Advance,
Byomo

Hi,
Please find the Business Scenario Configuration Guide for Service Procurement.
[http://service.sap.com/ibc-srm|http://service.sap.com/ibc-srm]
Regards,
Masa

Windows 2008 DNS & DHCP configuration steps for 11gR2 GI install with GNS

Similar Messages

Maybe you are looking for