Windows 2008 FRS port Customization causing Replication Delay
Hi
we have 4 windows 2008 R2 DC. we have restricted the port for FRS Replication. now we are facing replication delay.
Not finding any error in DCDIAG, REPADMIN /Showreps and in FRS event there is an error 13508 and it is not recovering since from 3 days to 13509 so please suggest the solution
whether Port customizion is recommended
Hi,
We can restrict FRS replication traffic to a specific static port. However, if there is an intermediate network device or software that is being used to filter packets between domain controllers, we need to verify that the device or the software
allows communication over the specified port. Additionally, make sure the destination TCP port that we set is open on the firewall.
Regarding restricting FRS replication traffic to a specific static port, the following article can be referred to for more information.
How to restrict FRS replication traffic to a specific static port
https://support.microsoft.com/en-us/kb/319553
Regarding troubleshooting FRS Event ID 13508, the following article can be referred to for more information.
Troubleshooting File Replication Service
https://msdn.microsoft.com/en-us/library/bb727056.aspx#EMAA
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Dear Tech Gurus,
Please see that we have Windows 2008 R2 Enterprise Edition on which we run our application which uses TCP Port 49158.
Yesterday our application stopped accidentally and when we tried to start application again it refuses.
I have telnet 127.0.0.1 49158 and it shows the same server get this port.
I change the port to 48157 and again try to run the server and it started successfully.
Today same issue happened. And now the 48157 is not working same behavior and I change the port to 49158 and it works fine.
What will be the possible reason please help.
Thanks
Malik Adeel Imtiaz
Malik Adeel ImtiazDear Techno Trev,
Thank you so much for your reply very much appreciated.
Can you please elaborate me that how I can reserve my (49158) port in Windows 2008 R2 as you said in your reply.
Thanks
Adeel Imtiaz
Malik Adeel Imtiaz -
I have a server with Intel 82576 Gigabit Dual Port Nics. I have configured them to use iSCSI boot the primary looks to 10.0.0.1/24 and the secondary looks to 10.0.1.1/24. The target is configured correctly. Everything boots as expected.
I have added the MPIO feature and configured MPIO for the iscsi initiator as per: http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx.
My issue is that the iSCSI networks show up in the routing table like so:
I did not configure a default route in the Intel setup utility:
I tried to explicitly remove the 0.0.0.0 entry and leave blank, with no change. As you can see with the above routing table traffic attempts to travel over these routes:
C:\Users\Administrator>ping google.com
Pinging google.com [209.85.145.99] with 32 bytes of data:
Reply from 10.0.0.201: Destination host unreachable.
Reply from 10.0.1.201: Destination host unreachable.
Reply from 209.85.145.99: bytes=32 time=23ms TTL=51
Reply from 209.85.145.99: bytes=32 time=22ms TTL=51
Ping statistics for 209.85.145.99:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
A ping to the outside world first attempts on 10.0.0.x/24 network, then on 10.0.1.x/24 network and then finally on the network the traffic should go over. I don't want my iSCSI traffic to ever show up with a default route. How do I get rid of it?
route delete 0.0.0.0 mask 0.0.0.0 "on-link" results in: The route deletion failed: The parameter is incorrect.
route delete 0.0.0.0 mask 0.0.0.0 on-link results in: The route deletion failed: The parameter is incorrect.
route delete 0.0.0.0 deletes all default routes, then I have to add back in the "valid default route" of 192.168.100.6.
I would like to not have to do a route delete though.So I've sort of given up on fixing the gateway assignment in the route for iSCSI boot. I configured a DHCP server to give out the information required by iSCSI boot and configured the network cards to use DHCP for their configuration. I insured
that my DHCP server gave out no default gateway entry. However, I still got the undesired routes in the routing table. This makes me assume that there isn't a "fix" for it, only the workaround.
Here is the script I run on each iSCSI Boot initiator (you would obviously change the ip number to suit your environment):
@Echo off
Rem fixes iscsi route problem as shown below:
Rem IPv4 Route Table
REM ===========================================================================
REM Active Routes:
REM Network Destination Netmask Gateway Interface Metric
REM 0.0.0.0 0.0.0.0 On-link 10.0.0.200 10255
REM 0.0.0.0 0.0.0.0 On-link 10.0.1.200 266
REM 0.0.0.0 0.0.0.0 192.168.100.6 192.168.100.98 266
REM The top 2 lines are on the iscsi interface and traffic tries to go out it
REM We need to delete the routes, so we'll just delete all gateway routes and
REM add back in the one we care about.
route delete 0.0.0.0 >c:\iscsibootroutefix.log
route -p add 0.0.0.0 mask 0.0.0.0 192.168.100.6 >>c:\iscsibootroutefix.log
After running it I get:
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.100.6 192.168.100.98 11
10.0.0.0 255.255.255.0 On-link 10.0.0.200 10255
10.0.0.1 255.255.255.255 On-link 10.0.0.200 10255
10.0.0.200 255.255.255.255 On-link 10.0.0.200 10255
Then I added a task in “task scheduler” of "administrative tools" that ran as the user “system” “when the computer starts” that runs this script. -
How to check DFS replication status in windows 2008 r2 file server
Hi,
I have created File server DFS namespace between 2 windows 2008 R2 server. namespace mode is 2008. I have copied 3 TB data on file server 1. now it is getting replicated from file server 1 to file server 2. till now the data is not fully replicated.
My question is how can I check the status of DFS replication? how will I come to know that the initial replication is completed.Scorpio. Yes you are right. Microsoft officially says it will not work. My apologies. Thanks for the correction.
Do Ultrasound and Sonar work with DFS Replication?
No. DFS Replication has its own set of monitoring and diagnostics tools. Ultrasound and Sonar are only capable of monitoring FRS.
Is there a way to know the state of replication?
Yes. There are a number of ways to monitor replication:
DFS Replication has a management pack for System Center Operations Manager 2007 that provides proactive monitoring.
DFS Replication has an in-box diagnostic report for the replication backlog, replication efficiency, and the number of files and folders in a given replication group.
Dfsrdiag.exe is a command-line tool that can generate a backlog count or trigger a propagation test. Both show the state of replication. Propagation shows you if files are being replicated to all nodes. Backlog shows you how many files still need to replicate
before two computers are in sync. The backlog count is the number of updates that a replication group member has not processed. On computers running Windows Server 2008 R2, Dfsrdiag.exe can also display the updates that DFS Replication is currently
replicating.
Scripts can use WMI to collect backlog information—manually or through MOM.
Miguel Fra /
Falcon IT Services
Computer & Network Support, Miami, FL
Visit our Knowledgebase and Support Sharepoint Site -
Windows 2008 Server contacting multiple public IP on port 80 and 443
Windows 2008 Server contacting multiple public IP on port 80 and 443
Source : Microsoft Lync 2010
Port : 80
Destination : unknown.prolexic.com
Source : Internet Explorer
Port : 80
Destination :a-0001.a-msedge.net
Source : Internet Explorer
Port : 443
Destination :204.79.197.200
Is this virus? how to stop the same?Org name of the IP shows Microsoft Corporation
Since its hits on firewall , i will have to stop the same
but not sure for what its being contacted to these Ips
OrgName: Microsoft Corporation -
Windows 2008 r2 WSUS port 8530
WINDOWS 2008 R2
new install of WSUS server 3.2.7600.251 want to change the port to 8530 from 80
But when I open command prompt and run wsusutil usecustomport true.....I get error :
C:\Program Files\Update Services\Tools>wsusutil usecustomwebsite true
Fatal Error: Exception has been thrown by the target of an invocation.Hi,
Did you stop the WSUS service before you change the port?
If no, please try to stop the WSUS service with the command below first:
net stop wsusservice
After change the port, run the command net start wsusservice to start he WSUS service.
Besides, do not forget to change the WSUS GPO settings.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
Is there any way to enable eventlog replication between two nodes in windows 2008 failover cluster.
Thanks Azam When you see answers please Mark as Answer if Helpful..vote as helpful.Hi,
As far as I know there don’t have the log replica function between failover cluster node, if you want to have the Unified log management you can refer the following related
KB:
Configure Computers to Forward and Collect Events
http://technet.microsoft.com/en-us/library/cc748890.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Long delay for authentication dialog 10.6.x to Windows 2008 SBS
I am encountering a very long delay (30-45 seconds) for the authentication dialog when connecting from Mac OS X 10.6.2 clients to a Windows 2008 Small Business Server.
We are connecting using the "Connect to Server" dialog, using smb://<server host name> and smb://<server IP address> as the URIs. Once the authentication dialog eventually comes up the users can log in successfully and access the shares on the server normally and at normal speed.
I see this entry show up in the system.log when a smb connection is started:
/System/Library/CoreServices/NetAuthAgent.app/Contents/MacOS/NetAuthAgent ### * process ### exceeded 500 log message per second limit - remaining messages this second discarded *
I would like to see the NetAuthAgent log that is referred to in the error but I haven't been able to determine where this log resides or it I need to set NetAuthAgent or the smb client into a debug mode to capture logging.
I have tried many of the usual fixes on the server side when it comes to Mac compatibility including:
•Disabled SMB signing
•Setting these registry values to 0:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Enablesecurity signature
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\Lanmanserver\Parameters\Requiresecurit ysignature
This was asked last October with no resolution:
http://discussions.apple.com/thread.jspa?messageID=9804807
If anyone has encountered this issue and discovered a solution please help. Thanks in advance!I'm having an issue with 10.6.x lately and Windows 2003.
Random disconnects and the same log errors about the message limit.
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 received event(s) VQ_DEAD (32)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/VideoSAN', from '//ACC;Phillip.Roncoroni@acc-office/VideoSAN', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/ACC_docs', from '//ACC;Phillip.Roncoroni@acc-office/ACC_docs', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/Drop Box', from '//ACC;Phillip.Roncoroni@acc-office/Drop%20Box', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 found 3 filesystem(s) with problem(s)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 received event(s) VQ_DEAD (32)
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 type 'smbfs', mounted on '/Volumes/Photos', from '//ACC;Phillip.Roncoroni@acc-office/Photos', dead
Feb 24 11:20:02 macpro-phil KernelEventAgent[73]: tid 00000000 found 1 filesystem(s) with problem(s)
Also looking for a resolution. -
EPM 11.1.2: Foundation Services config fails on Windows 2008 SP1 server.
Hi,
I installed EPM 11.1.2 on Windows 2008 SP1, 32-bit. The installation succeeded (no errors in logs). However, when I run EPM Configurator to configure Foundation Services, it fails.
Environment:
EPM Server: Windows 2008 SP1 32-bit
RDBMS: Oracle Enterprise Edition 10.2.0.4 (running on remote AIX 5.3 TL 8 server)
Oracle Client: 10.2.0.4 (full client install)
The configtool.log (see below) indicates that the program cannot find the reg.properties file. I checked the server and this file does not exist. The log file also reports non-existing classpath entries (not sure if this is related). The registry.log file (see below) reports a jdbc driver error: java.sql.SQLSyntaxErrorException: ORA-00917: missing comma.
I submitted a service request with Oracle Support, but the support engineer said that installation and configuration errors are outside the scope of technical support.
Any ideas/suggestions would be greatly appreciated.
Thank you.
Configtool_Summary.log:
---- Product Configuration Summary.....
( May 9, 2010 6:55:58 AM ): ---- Hyperion Foundation Configuration......
( May 9, 2010 6:55:59 AM ): Pre-Configuration :: pass
( May 9, 2010 6:55:59 AM ): Common Settings :: fail
( May 9, 2010 6:56:03 AM ): Configure Database :: pass
( May 9, 2010 6:56:03 AM ): Deploy to Application Server :: fail
( May 9, 2010 6:57:03 AM ): Configure Oracle Configuration Manager :: fail
( May 9, 2010 6:57:08 AM ): ---- Workspace Configuration......
( May 9, 2010 6:57:08 AM ): Deploy to Application Server :: fail
Configtool.log:
[2010-05-09T06:49:19.927-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.oracle.preconfig.util.EpmLoggerPreConfigReporter] trace: Running preconfig checks...[[
Running EPM_ORACLE_HOME check...
EPM_ORACLE_HOME environment variable value: C:\Oracle\Middleware\EPMSystem11R1
JAVA_HOME environment variable value: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_11
EPM_ORACLE_HOME check succeeded
Running .oracle.products check... .oracle.products check succeeded
Running Jars manifest check...
Time spent for manifests parsing: 55129 ms
Maximum jars depth achieved: 9, while restriction was: unrestricted
Parsed 439 manifests
Total jars and classpath entries encountered: 439
Total not-existing referenced classpath entries count: 28
Enumerating not-existing classpath entries:
Missing (depth 9) file C:\oracle\Middleware\modules\com.bea.cie.comdev.it_6.1.1.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config.it_6.1.0.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config.L10N_6.1.0.0.jar referenced from C:\oracle\Middleware\modules\features\com.bea.cie.config_6.1.0.0.jar referenced from C:\oracle\Middleware\utils\config\10.3\config-launch.jar referenced from C:\oracle\Middleware\wlserver_10.3\common\lib\pdev.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_jrf.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar
Missing (depth 5) file C:\oracle\Middleware\wlserver_10.3\server\lib\wlw-langx-L10N.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\wlw-langx.jar referenced from C:\oracle\Middleware\wlserver_10.3\server\lib\weblogic.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_jrf.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\jlib\11.1.2.0\epm_j2se.jar referenced from C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\configtool.jar
Total classpath elements to check: 67
Check for C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\lib\hit-common.jar existence succeeded; file depth: 1
Check for C:\oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\lib\hit-config.jar existence succeeded; file depth: 1
Jars manifest check succeeded
Running Environment variables check... Environment variables check succeeded
Running Windows system32 directory check... Windows system32 directory check succeeded
Preconfig checks passed! Going further
[2010-05-09T06:49:22.303-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01731] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.wizard.ConfigToolWizardLoader] Couldnt find proper class for wizard state: {0}, skipping...
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: {0}[[
com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Init Storage] has been started.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Getting registry instance] has been started.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05935] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Getting registry instance] has been ended. Execution time [0] sec.
[2010-05-09T06:49:22.943-06:00] [EPMCFG] [TRACE] [EPMCFG-05934] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.utils.StopWatch] Task [Loading CT documents] has been started.
[2010-05-09T06:49:22.959-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01044] [oracle.EPMCFG] [tid: 10] [ecid: 0000IXx7D4337E65zNd9iW1BtexF000000,0] [SRC_CLASS: com.hyperion.cis.config.document.ConfigToolDocumentManager] Loading product descriptor from file C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\product\aps\11.1.2.0\default_aps_1.xml...
[2010-05-09T06:50:53.137-06:00] [EPMCFG] [TRACE] [EPMCFG-05922] [oracle.EPMCFG] [tid: 13] [ecid: 0000IXx7Zkm37E65zNd9iW1BtexF000004,0] [SRC_CLASS: com.hyperion.install.sw.SoftwareRegistry] Adding Hyperion Home entry...
[2010-05-09T06:50:53.137-06:00] [EPMINS] [NOTIFICATION] [EPMINS-00006] [oracle.EPMINS] [tid: 13] [ecid: 0000IXx7Zkm37E65zNd9iW1BtexF000004,0] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] Wizard state is: RegistryWizardState
[2010-05-09T06:51:41.437-06:00] [EPMINS] [TRACE] [EPMINS-00015] [oracle.EPMINS] [tid: 11] [ecid: 0000IXx7Zhb37E65zNd9iW1BtexF000002,0] [SRC_CLASS: com.hyperion.hit.wizard.AbstractWizardAction] Invoked action: navigation.next
[2010-05-09T06:51:41.453-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: {0}[[
com.hyperion.hit.registry.exceptions.RegistryException: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.Registry.releaseInstance(Registry.java:2039)
at com.hyperion.config.document.Storage.resetRegistryItems(Storage.java:811)
at com.hyperion.config.document.Storage.resetRegistry(Storage.java:798)
at com.hyperion.config.wizard.impl.RegistryWizardState$1.validate(RegistryWizardState.java:348)
at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:504)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:149)
at com.hyperion.hit.registry.Registry.releaseInstance(Registry.java:2030)
... 5 more
[2010-05-09T06:51:46.891-06:00] [EPMCFG] [WARNING] [EPMCFG-01863] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] Unknown server type: ORACLE
[2010-05-09T06:51:46.938-06:00] [EPMCFG] [TRACE] [EPMCFG-01864] [oracle.EPMCFG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RegistryWizardState] HSS DB commit: serverType = ORACLE, host = fsdev21.jeffco.k12.co.us, port = 1521, db = EPMDMO
[2010-05-09T06:54:20.402-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: SSL Protocol Initialized - SSL SocketFactory initialized
[2010-05-09T06:54:20.699-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: Peer Certificate Chain(3):
[2010-05-09T06:54:20.714-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: [[[
Version: V3
Subject: CN=ccr.oracle.com, OU=Terms of use at www.verisign.com/rpa (c)05, OU=Global IT, O=Oracle Corporation, L=Redwood Shores, ST=California, C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 1024 bits
modulus: 126484617735060833031672477175673947636995798346030414463203905767325249772953279144384357766006815101034501698878511926718137275402247180206176507598520965207099036209959054153609440070358274987559344845438007585125964758282852498389487164896685302381484205088204064664382056656592869143856352689583929480807
public exponent: 65537
Validity: [From: Mon May 04 18:00:00 MDT 2009,
To: Sun Jul 04 17:59:59 MDT 2010]
Issuer: CN=VeriSign Class 3 Secure Server CA, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
SerialNumber: [ 52b9bccd 239d7a0d 7bb16003 389848b0]
Certificate Extensions: 8
[1]: ObjectId: 1.3.6.1.5.5.7.1.12 Criticality=false
Extension unknown: DER encoded OCTET string =
0000: 04 62 30 60 A1 5E A0 5C 30 5A 30 58 30 56 16 09 .b0`.^.\0Z0X0V..
0010: 69 6D 61 67 65 2F 67 69 66 30 21 30 1F 30 07 06 image/gif0!0.0..
0020: 05 2B 0E 03 02 1A 04 14 4B 6B B9 28 96 06 0C BB .+......Kk.(....
0030: D0 52 38 9B 29 AC 4B 07 8B 21 05 18 30 26 16 24 .R8.).K..!..0&.$
0040: 68 74 74 70 3A 2F 2F 6C 6F 67 6F 2E 76 65 72 69 http://logo.veri
0050: 73 69 67 6E 2E 63 6F 6D 2F 76 73 6C 6F 67 6F 31 sign.com/vslogo1
0060: 2E 67 69 66 .gif
[2]: ObjectId: 2.5.29.35 Criticality=false
AuthorityKeyIdentifier [
KeyIdentifier [
0000: 6F EC AF A0 DD 8A A4 EF F5 2A 10 67 2D 3F 55 82 o........*.g-?U.
0010: BC D7 EF 25 ...%
[3]: ObjectId: 2.5.29.31 Criticality=false
CRLDistributionPoints [
[DistributionPoint:
[URIName: http://SVRSecure-crl.verisign.com/SVRSecure2005.crl]
[4]: ObjectId: 2.5.29.37 Criticality=false
ExtendedKeyUsages [
serverAuth
clientAuth
[5]: ObjectId: 2.5.29.32 Criticality=false
CertificatePolicies [
[CertificatePolicyId: [2.16.840.1.113733.1.7.23.3]
[PolicyQualifierInfo: [
qualifierID: 1.3.6.1.5.5.7.2.1
qualifier: 0000: 16 1C 68 74 74 70 73 3A 2F 2F 77 77 77 2E 76 65 ..https://www.ve
0010: 72 69 73 69 67 6E 2E 63 6F 6D 2F 72 70 61 risign.com/rpa
[6]: ObjectId: 2.5.29.15 Criticality=false
KeyUsage [
DigitalSignature
Key_Encipherment
[7]: ObjectId: 1.3.6.1.5.5.7.1.1 Criticality=false
AuthorityInfoAccess [
[accessMethod: 1.3.6.1.5.5.7.48.1
accessLocation: URIName: http://ocsp.verisign.com, accessMethod: 1.3.6.1.5.5.7.48.2
accessLocation: URIName: http://SVRSecure-aia.verisign.com/SVRSecure2005-aia.cer]
[8]: ObjectId: 2.5.29.19 Criticality=false
BasicConstraints:[
CA:false
PathLen: undefined
Algorithm: [SHA1withRSA]
[2010-05-09T06:54:20.714-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 22] [ecid: 0000IXx8MHf37E65zNd9iW1BtexF00000B,0] [SRC_CLASS: com.hyperion.cis.utils.Log4jEPMLoggerAdapter] trace: oracle.sysman.ccr.common.network.EndPoint: [[[
Version: V3
Subject: CN=VeriSign Class 3 Secure Server CA, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5
Key: Sun RSA public key, 2048 bits
modulus: 18905729229464742433949840178165285210788629616064305164260843170201977241822595607598003983710482114887504542420063531704226365322091550579034120400511694538047325464426047959412241672706076731441028369861556999479337863789783838582999151810376013650218058341794419022809268802993425241541430009002110553726612125414429934927217253337526656605550620555845061032537869588361121949241772361851996536275260212221084778605793422355009443918198903890623415507477268041766919150091887619618794603091993360637671933766441597921249204891707900552776893415739395596650548462810104696585021566385762017523199762687187467514321
public exponent: 65537
Validity: [From: Tue Jan 18 17:00:00 MST 2005,
To: Sun Jan 18 16:59:59 MST 2015]
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
SerialNumber: [ 75337d9a b0e1233b ae2d7de4 469162d4]
<RESPONSE><STATUS CODE="202"><MESSAGE></MESSAGE></STATUS><REQUEST_DATA><REGISTRATION_CIPHER VALUE="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"/></REQUEST_DATA></RESPONSE>
[2010-05-09T06:55:22.359-06:00] [EPMCFG] [WARNING] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] trace: The component type 'Foundation' is not supported. Valid component types are: [OCM, OHS, WebCache]
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] trace: com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-02015] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Creating product component(s) in the HIT Registry (if not created yet) for all selected product(s)...
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01322] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Product component already exists in the registry: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:55:33.954-06:00] [EPMCFG] [TRACE] [EPMCFG-01321] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Creating product component: component type = WORKSPACE
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-05955] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Setting link. Parent: id [b57bd794d9cd2537337158c31287d1efc497ffe], componnet type [FOUNDATION_SERVICES_PRODUCT]. Child: id [b57bd794d9cd2537337158c31287d1efc497ff1], component type [WORKSPACE]
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1] to be stored
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : allRegistryComponents contains WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1]
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-02144] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.document.Storage] Storage storeComponent trace : toUpdateComponents did not contain WORKSPACE:[b57bd794d9cd2537337158c31287d1efc497ff1]. It has been added to toUpdateComponents
[2010-05-09T06:55:42.970-06:00] [EPMCFG] [TRACE] [EPMCFG-01426] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.ant.AbstractAntConfigurator] propertiesExtractLocation : C:\Oracle\Middleware\user_projects\domains\EPMSystem\scripts
[2010-05-09T06:55:47.986-06:00] [EPMCFG] [ERROR] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.utils.Shortcut] trace: shortcut out:Microsoft (R) Windows Script Host Version 5.7[[
Copyright (C) Microsoft Corporation. All rights reserved.
[2010-05-09T06:55:58.627-06:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-05-09T06:56:02.690-06:00] [EPMCFG] [WARNING] [EPMCFG-01113] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.AbstractProductDBConfigurator] Couldn't find product component in updateRegistryEntries
[2010-05-09T06:56:02.706-06:00] [EPMCFG] [NOTIFICATION] [EPMCFG-01107] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.DBConfigurator] Running file: C:\Oracle\Middleware\EPMSystem11R1\products\Foundation\workspace\database\Oracle\create.sql
[2010-05-09T06:56:03.503-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
java.lang.NullPointerException
at com.hyperion.cis.config.AppServerDeployer.isDeployAsWinService(AppServerDeployer.java:1699)
at com.hyperion.cis.config.AppServerDeployer.initializeParameters(AppServerDeployer.java:169)
at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:636)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:331)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:57:03.804-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.foundation.config.OCMTaskProcessor] Error: [[
java.lang.NullPointerException
at com.hyperion.foundation.config.OCMTaskProcessor.uploadOCMConfigurationToRegistry(OCMTaskProcessor.java:209)
at com.hyperion.foundation.config.OCMTaskProcessor.execute(OCMTaskProcessor.java:95)
at com.hyperion.cis.CustomTaskProcessor.execute(CustomTaskProcessor.java:94)
at com.hyperion.config.wizard.impl.RunAllTasks.executeCustomTask(RunAllTasks.java:725)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:313)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [ERROR] [EPMCFG-02151] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.fusion.FusionComponent] oracleComponent is null. Component will not be provisioned.
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Component provisioning is done.
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: Done sorting tasks by priority
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-07326] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Executing deployment task for ProductDescriptor [workspace]
[2010-05-09T06:57:07.992-06:00] [EPMCFG] [TRACE] [EPMCFG-01328] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.cis.config.ConfigRegistryUtils] Looking for product component in the registry: component type = SHARED_SERVICES_PRODUCT
[2010-05-09T06:57:08.007-06:00] [EPMCFG] [ERROR] [EPMCFG-01020] [oracle.EPMCFG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] Error: [[
java.lang.NullPointerException
at com.hyperion.cis.config.AppServerDeployer.isDeployAsWinService(AppServerDeployer.java:1699)
at com.hyperion.cis.config.AppServerDeployer.initializeParameters(AppServerDeployer.java:169)
at com.hyperion.config.wizard.impl.RunAllTasks.executeAppDeploymentTask(RunAllTasks.java:636)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:331)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
Registry.log:
[2010-05-09T06:51:46.860-06:00] [EPMREG] [NOTIFICATION] [EPMREG-51096] [oracle.EPMREG.REG] [tid: 14] [ecid: 0000IXx7j^D37E65zNd9iW1BtexF000005,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryUtils] [SRC_METHOD: readDatabaseProperties] Security Key could not be read from reg.properties file.
[2010-05-09T06:55:33.719-06:00] [EPMREG] [ERROR] [EPMREG-11054] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryConnection] [SRC_METHOD: createRegistry] [arg: C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\registry\create_oracle.sql] An SQL Exception executing the registry DDL script C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\registry\create_oracle.sql.
[2010-05-09T06:55:33.735-06:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.RegistryConnection] [SRC_METHOD: createRegistry] Exception occurred.[[
java.sql.SQLSyntaxErrorException: ORA-00917: missing comma
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:91)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1035)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)
at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:942)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1223)
at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1775)
at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1744)
at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:299)
at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:241)
at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:82)
at com.hyperion.hit.registry.Registry.createRegistry(Registry.java:2220)
at com.hyperion.config.document.Storage.createRegProperties(Storage.java:1396)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:105)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11037] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: getConnection] An error occured when checking the status of the registry connection and reseting it.[[
com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:161)
at com.hyperion.hit.registry.Registry.lookupComponents(Registry.java:1263)
at com.hyperion.hit.registry.Registry.lookup(Registry.java:517)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:70)
at com.hyperion.css.registry.RegistryManager.populateCSSTrustedServicesKey(RegistryManager.java:140)
at com.hyperion.foundation.config.FoundationDbConfigurator.populateCssTrustedKey(FoundationDbConfigurator.java:121)
at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:88)
at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11045] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: lookupComponents] [arg: SYSTEM9] An exception when looking up components of type SYSTEM9 matching the specified properties.
[2010-05-09T06:56:03.456-06:00] [EPMREG] [ERROR] [EPMREG-11099] [oracle.EPMREG.REG] [tid: 27] [ecid: 0000IXx8^W937E65zNd9iW1BtexF00000G,0] [SRC_CLASS: com.hyperion.hit.registry.Registry] [SRC_METHOD: lookupComponents] Exception occurred.[[
com.hyperion.hit.registry.exceptions.RegistryException: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:178)
at com.hyperion.hit.registry.Registry.lookupComponents(Registry.java:1263)
at com.hyperion.hit.registry.Registry.lookup(Registry.java:517)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:70)
at com.hyperion.css.registry.RegistryManager.populateCSSTrustedServicesKey(RegistryManager.java:140)
at com.hyperion.foundation.config.FoundationDbConfigurator.populateCssTrustedKey(FoundationDbConfigurator.java:121)
at com.hyperion.foundation.config.FoundationDbConfigurator.configure(FoundationDbConfigurator.java:88)
at com.hyperion.config.wizard.impl.RunAllTasks.executeDbConfigTask(RunAllTasks.java:753)
at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:322)
at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:89)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.hyperion.hit.registry.exceptions.RegistryException: No database properties could be read
at com.hyperion.hit.registry.datasource.SharedServicesDataSourceFactory.getDataSource(SharedServicesDataSourceFactory.java:29)
at com.hyperion.hit.registry.datasource.SharedServicesDatabaseConnectionBuilder.getConnection(SharedServicesDatabaseConnectionBuilder.java:26)
at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:183)
at com.hyperion.hit.registry.Registry.getConnection(Registry.java:161)
... 10 moreYes. I downloaded and extracted the additional components. I have also dropped and recreated the HSS repository. Each time I have tried to reinstall, I have uninstalled all EPM/Oracle components, removed registry keys, removed EPM environment variables and removed references to oracle in the PATH environment variable.
I have tried installing/configuring HSS 11.1.2 on both Windows 2008 SP1 64-bit and Windows 2008 SP1 32-bit. The configuration error is the same.
I was able to get my SR reassigned to a different support analyst, and we are working on troubleshooting now.
If you can think of anything else to try, let me know.
BTW...on the 32-bit server, the page file maximum is 16GB (should be enough)?
Thanks. -
Unable to login to Report Service on Windows 2008 R2 server
I have reporting services installed on a Windows 2008 R2 server, When I make and RDP connection to the server and go to http://servername/Reports everything works fine. When I try to connect from another client to the web service, it asks for username and
password. it fails 3 times and the shows a blank page.
When I see the Event Viewer in the server (Windows Logs --> Security, I can see an Audit Failure:
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 9/4/2014 11:46:25 AM
Event ID: 4625
Task Category: Logon
Level: Information
Keywords: Audit Failure
User: N/A
Computer: MI-SWACO-DB.houston.livequest.net
Description:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: Administrator
Account Domain: HOUSTONLQ
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000035b
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: MI-SWACO3
Source Network Address: -
Source Port: -
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
<EventID>4625</EventID>
<Version>0</Version>
<Level>0</Level>
<Task>12544</Task>
<Opcode>0</Opcode>
<Keywords>0x8010000000000000</Keywords>
<TimeCreated SystemTime="2014-09-04T16:46:25.247229500Z" />
<EventRecordID>8917</EventRecordID>
<Correlation />
<Execution ProcessID="504" ThreadID="1344" />
<Channel>Security</Channel>
<Computer>MI-SWACO-DB.houston.livequest.net</Computer>
<Security />
</System>
<EventData>
<Data Name="SubjectUserSid">S-1-0-0</Data>
<Data Name="SubjectUserName">-</Data>
<Data Name="SubjectDomainName">-</Data>
<Data Name="SubjectLogonId">0x0</Data>
<Data Name="TargetUserSid">S-1-0-0</Data>
<Data Name="TargetUserName">Administrator</Data>
<Data Name="TargetDomainName">HOUSTONLQ</Data>
<Data Name="Status">0xc000035b</Data>
<Data Name="FailureReason">%%2304</Data>
<Data Name="SubStatus">0x0</Data>
<Data Name="LogonType">3</Data>
<Data Name="LogonProcessName">
</Data>
<Data Name="AuthenticationPackageName">NTLM</Data>
<Data Name="WorkstationName">MI-SWACO3</Data>
<Data Name="TransmittedServices">-</Data>
<Data Name="LmPackageName">-</Data>
<Data Name="KeyLength">0</Data>
<Data Name="ProcessId">0x0</Data>
<Data Name="ProcessName">-</Data>
<Data Name="IpAddress">-</Data>
<Data Name="IpPort">-</Data>
</EventData>
</Event>
The firewall is OFF in both client and server.
I saw a similar question and the answer is related to firewall which is not may case.Hi Mario,
According to your description, when you try to access the Report Manager in another client, a login dialog prompt. After typing a valid username and password 3 times, a blank page displays.
Generally, the issue is always caused by the Report Server is configured to use Kerberos authentication, while the Service Principal Name(SPN) is not configured correctly. To fix this issue, please refer to the following methods:
Register an SPN for the Report Server service under the domain user account.
Change the service account to run under a built-in account such as Network Service.
Remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file.
Besides, the issue can also be caused by the Internet Explorer (IE) didn't pass the user's credential to the Report Server automatically or the IE is not Windows Integrated enabled. For more detail steps about how to address this issue, please refer to the
following steps:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/184c4f6c-b292-4f9a-beca-80b70f4392fe/report-manager-prompts-3-or-4-times-for-usernamepassword-before-letting-users-in?forum=sqlreportingservices
Reference:
Resolving Kerberos Authentication Errors When Connecting to a Report Server
Solving the Reporting Services Login issue in the February CTP of SQL Server 2008
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Slow network printing on Windows 2008 Server
Hi,
We are just testing/configuring a Windows 2008 (x64) server to replace an aging Windows 2000 file & print server.
I have added the print services role and added a network TCP/IP printer (a HP Laserjet 2200).
When I print to this printer from either the server (via print test page) or from a client, it takes around 30 seconds before the print will start to print. On our Windows 2000 server, this would print immediately.
I have insalled the HP 2200 driver that came with Windows 2008.
Anyone any ideas where to find the problem causing the delay?
Thanks,
KennyHello,
I have done some research and I find firewall component of the antivirus software such as Mcafee might cause similar network delay issues.
If you have installed AV softwares on Windows Server 2008, please try uninstalling it temperately and test whether this will make any difference.
Moreover, You could also try disabling TCP Chimney Offload, RSS, Receive Window Auto-Tuning Level on Windows Server 2008 one by one to see whether it makes any difference.
To disable TCP Chimney Offload, follow these steps:
a. Use administrative credentials to open a command prompt.
b. At the command prompt, type the following command, and then press ENTER:
netsh int tcp set global chimney=disabled
To disable RSS, follow these steps:
a. Use administrative credentials to open a command prompt.
b. At the command prompt, type the following command, and then press ENTER:
netsh int tcp set global RSS=disabled
To disable 'Receive Window Auto-Tuning Level', follow these steps: :
a. Use administrative credentials to open a command prompt.
b. At the command prompt, type the following command, and then press ENTER:
netsh interface tcp set global autotuninglevel=disabled
I hope this helps. Thanks.
Regards,
Neo Zhu -
Dear Friends
I have created fail over cluster in windows 2008 r2 after long working hours i have made the cluster service up and now i am unable to the add the node to the cluster following is the error please help me in this
regards
error : 100% Waiting for notification that node is a fully functional member of the cluster.This phase has failed for Cluster object ' ' with an error status of 1460 (0x000005B4).
Cleaning up
System error 1460 has occurred (0x000005b4).
This operation returned because the timeout period expired.
Server used :
Domain Controller : windows 2008 R2 standard
Node1: windows 2008 r2 Enterprise
Node 2: Windows 2008 r2 Enterprise
Please do help me in this regards, Awaiting for your favorable reply and suggestions
Thanks and regards
SriniHello Srini,
Please run the cluster validation and make sure the node1 network configuration is properly configured, this issue is due the communication timeout between the nodes.
There are 2 causes for this issue
1 --> Duplicate accounts in AD, this error occurs if you are adding node to cluster which has the computer name same as the user account name in active directory
2 --> windows firewall port might block the communication ports between the nodes, please make sure you turn off windows firewall on both the nodes
Look for any specific errors in system event logs
If you dont get much information then please generate cluster log and upload it here then we can analyse and see what's causing this issue.
Cluster log /gen
will generate a cluster log and place it in the %systemroot%\Windows\System32\Cluster\Reports
Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you. -
Aironet 2702i Autonomous - Web-Authentication with Radius Window 2008
Hi Guys,
I have a problems with case, i have diagrams sample like then : AD(Win2008) - Radius(Win2008) - Aironet 2702i => Use methods Web-Auth for EndUser
This is my Configure file on Aironet 2702i
Aironet2702i#show run
Building configuration...
Current configuration : 8547 bytes
! Last configuration change at 05:08:25 +0700 Fri Oct 31 2014 by admin
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Aironet2702i
logging rate-limit console 9
aaa new-model
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login DTSGROUP group radius
aaa authentication login webauth group radius
aaa authentication login weblist group radius
aaa authentication dot1x default group radius
aaa authorization exec default local
aaa session-id common
clock timezone +0700 7 0
no ip source-route
no ip cef
ip admission name webauth proxy http
ip admission name webauth method-list authentication weblist
no ip domain lookup
ip domain name dts.com.vn
dot11 syslog
dot11 activity-timeout unknown default 1000
dot11 activity-timeout client default 1000
dot11 activity-timeout repeater default 1000
dot11 activity-timeout workgroup-bridge default 1000
dot11 activity-timeout bridge default 1000
dot11 vlan-name DTSGroup vlan 46
dot11 vlan-name L6-Webauthen-test vlan 45
dot11 vlan-name NetworkL7 vlan 43
dot11 vlan-name SGCTT vlan 44
dot11 ssid DTS-Group
vlan 46
authentication open eap DTSGROUP
authentication key-management wpa version 2
mbssid guest-mode
dot11 ssid DTS-Group-Floor7
vlan 43
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 013D03104C0414040D4D5B5E392559
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
dot11 ssid SaigonCTT-Public
vlan 44
authentication open
authentication key-management wpa version 2
mbssid guest-mode
wpa-psk ascii 7 04480A0F082E424D1D0D4B141D06421224
dot11 arp-cache optional
dot11 adjacent-ap age-timeout 3
eap profile DTSGROUP
description testwebauth-radius
method peap
method mschapv2
method leap
username TRIHM privilege 15 secret 5 $1$y1J9$3CeHRHUzbO.b6EPBmNlFZ/
username ADMIN privilege 15 secret 5 $1$IvtF$EP6/9zsYgqthWqTyr.1FB0
ip ssh version 2
bridge irb
interface Dot11Radio0
no ip address
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 46 mode ciphers aes-ccm
encryption mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
ssid DTS-Group
ssid DTS-Group-Floor7
ssid L6-Webauthen-test
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
stbc
mbssid
packet retries 128 drop-packet
channel 2412
station-role root
rts threshold 2340
rts retries 128
ip admission webauth
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface Dot11Radio1
no ip address
shutdown
encryption vlan 46 mode ciphers aes-ccm
encryption vlan 44 mode ciphers aes-ccm
encryption vlan 1 mode ciphers aes-ccm
encryption vlan 43 mode ciphers aes-ccm
encryption vlan 45 mode ciphers ckip-cmic
ssid DTS-Group
ssid DTS-Group-Floor7
ssid SaigonCTT-Public
countermeasure tkip hold-time 0
antenna gain 0
peakdetect
dfs band 3 block
stbc
mbssid
packet retries 128 drop-packet
channel 5745
station-role root
rts threshold 2340
rts retries 128
interface Dot11Radio1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 subscriber-loop-control
bridge-group 43 spanning-disabled
bridge-group 43 block-unknown-source
no bridge-group 43 source-learning
no bridge-group 43 unicast-flooding
interface Dot11Radio1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 subscriber-loop-control
bridge-group 44 spanning-disabled
bridge-group 44 block-unknown-source
no bridge-group 44 source-learning
no bridge-group 44 unicast-flooding
ip admission webauth
interface Dot11Radio1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 subscriber-loop-control
bridge-group 45 spanning-disabled
bridge-group 45 block-unknown-source
no bridge-group 45 source-learning
no bridge-group 45 unicast-flooding
ip admission webauth
interface Dot11Radio1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 subscriber-loop-control
bridge-group 46 spanning-disabled
bridge-group 46 block-unknown-source
no bridge-group 46 source-learning
no bridge-group 46 unicast-flooding
interface GigabitEthernet0
no ip address
duplex auto
speed auto
dot1x pae authenticator
dot1x authenticator eap profile DTSGROUP
dot1x supplicant eap profile DTSGROUP
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet0.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet0.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet0.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet0.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface GigabitEthernet1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet1.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 spanning-disabled
no bridge-group 1 source-learning
interface GigabitEthernet1.43
encapsulation dot1Q 43
bridge-group 43
bridge-group 43 spanning-disabled
no bridge-group 43 source-learning
interface GigabitEthernet1.44
encapsulation dot1Q 44
bridge-group 44
bridge-group 44 spanning-disabled
no bridge-group 44 source-learning
interface GigabitEthernet1.45
encapsulation dot1Q 45
bridge-group 45
bridge-group 45 spanning-disabled
no bridge-group 45 source-learning
interface GigabitEthernet1.46
encapsulation dot1Q 46
bridge-group 46
bridge-group 46 spanning-disabled
no bridge-group 46 source-learning
interface BVI1
mac-address 58f3.9ce0.8038
ip address 172.16.1.62 255.255.255.0
ipv6 address dhcp
ipv6 address autoconfig
ipv6 enable
ip forward-protocol nd
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius server 172.16.50.99
address ipv4 172.16.50.99 auth-port 1645 acct-port 1646
key 7 104A1D0A4B141D06421224
bridge 1 route ip
line con 0
logging synchronous
line vty 0 4
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
line vty 5 15
exec-timeout 0 0
privilege level 15
logging synchronous
transport input ssh
end
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: S-1-5-21-858235673-3059293199-2272579369-1162
Account Name: xxxxxxxxxxxxxxxx
Account Domain: xxxxxxxxxxx
Fully Qualified Account Name: xxxxxxxxxxxxxxxxxxx
Client Machine:
Security ID: S-1-0-0
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: -
Calling Station Identifier: -
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
So i will explain problems what i have seen:
SSID: DTS-Group using authentication EAP with RADIUS and it working great (Authentication Type from Aironet to RADIUS is PEAP)
SSID:L6-Webauthen-test using web-auth and i had try to compare with RADIUS but ROOT CAUSE is AUTHENTICATION TYPE from Aironet to RADIUS default is PAP. (Reason Code : 66)
=> I had trying to find how to change Authentication Type of Web-Auth on Cisco Aironet from PAP to PEAP or sometime like that for combine with RADIUS.
Any idea or recommend for me ?
Thanks for see my caseHi Dhiresh Yadav,
Many thanks for your reply me,
I will explain again for clear my problems.
At this case, i had setup complete SSID DTS-Group use authentication with security as PEAP combine Radius Server running on Window 2008.
I had login SSID by Account create in AD => It's work okay with me. Done
Problems occurs when i try to use Web-authentication on Vlan45 With SSID :
dot11 ssid L6-Webauthen-test
vlan 45
web-auth
authentication open
dot1x eap profile DTSGROUP
mbssid guest-mode
After configured on Aironet and Window Radius , i had try to login with Account create in AD by WebBrowser but it Fail ( i have see mini popup said: Authentication Fail" . So i go to Radius Server and search log on EventViewer.
This is My Logfile on Radius Win 2008 :
Network Policy Server denied access to a user.
NAS:
NAS IPv4 Address: 172.16.1.62
NAS IPv6 Address: -
NAS Identifier: Aironet2702i
NAS Port-Type: Async
NAS Port: -
RADIUS Client:
Client Friendly Name: Aironet2702i
Client IP Address: 172.16.1.62
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: DTSWIRELESS
Authentication Provider: Windows
Authentication Server: xxxxxxxxxxxxxx
Authentication Type: PAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 66
Reason: The user attempted to use an authentication method that is not enabled on the matching network policy.
Im think ROOT CAUSE is :
PAP is the default authentication type for web-auth users on Aironet 2702i, so it can't combine with Radius Window 2008 because they just support PEAP (CHAPv1,CHAPv2....) => Please give me a tip how to change Authentication Type from PAP to PEAP for Web Authentication on Aironet -
Msiscsi.sys crashing in Windows 2008 R2 Datacenter x64
After enabling MPIO for ISCSI one of our HyperV Clustered Windows 2008 R2 Datacenter x64 servers has been unstable, crashing 3-5 times daily. I've had to take it out of service and after analyzing the dump file it seems there is an issue with msiscsi.sys and overlapping drivers 'tssecsrv' and 'tdtcp.sys' This all started occuring after we enabled MPIO to connect to our Promise Vessraid ISCSI using MultiPath I/O over iSCSI. We are connecting using two intel network cards to 2 gigabit ports on the VessRaid. Other than the Intel network drivers (v14.7 package version 11.0.103 7/14/2009) and Intel Matrix Storage Array 10R drivers, everything is Microsoft (OS, patches, iscsi initiator, HyperV, MPIO) Any ideas and where to start?
Analyze -v below:
Microsoft (R) Windows Debugger Version 6.11.0001.404 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [c:\windows\memory.dmp]
Kernel Summary Dump File: Only kernel address space is available
Symbol search path is: SRV*n:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: n:\i386
Windows 7 Kernel Version 7600 MP (16 procs) Free x64
Product: LanManNt, suite: TerminalServer DataCenter SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`0180c000 PsLoadedModuleList = 0xfffff800`01a49e50
Debug session time: Mon Dec 14 20:12:27.351 2009 (GMT-8)
System Uptime: 0 days 18:44:22.000
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck A, {4, 2, 1, fffff8000188fac1}
Probably caused by : msiscsi.sys ( msiscsi!iSpProcessWMIRequestTimeout+71e )
Followup: MachineOwner
8: kd> !analyze -v
* Bugcheck Analysis *
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff8000188fac1, address which referenced memory
Debugging Details:
OVERLAPPED_MODULE: Address regions for 'tssecsrv' and 'tdtcp.sys' overlap
WRITE_ADDRESS: 0000000000000004
CURRENT_IRQL: 2
FAULTING_IP:
nt!IoReleaseRemoveLockEx+21
fffff800`0188fac1 f0834304ff lock add dword ptr [rbx+4],0FFFFFFFFh
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: fffff8800233d180 -- (.trap 0xfffff8800233d180)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa8055864210 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8000188fac1 rsp=fffff8800233d310 rbp=0000000000000000
r8=0000000000000020 r9=000000000000000c r10=fffff8000180c000
r11=fffff8800233d2e0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz ac pe cy
nt!IoReleaseRemoveLockEx+0x21:
fffff800`0188fac1 f0834304ff lock add dword ptr [rbx+4],0FFFFFFFFh ds:00000000`00000004=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff8000187d469 to fffff8000187df00
STACK_TEXT:
fffff880`0233d038 fffff800`0187d469 : 00000000`0000000a 00000000`00000004 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`0233d040 fffff800`0187c0e0 : fffffa80`5718f020 00000000`00000000 00000000`00000000 fffff880`03a82366 : nt!KiBugCheckDispatch+0x69
fffff880`0233d180 fffff800`0188fac1 : fffffa80`58de9030 fffff800`01a215f8 fffffa80`24f54040 fffffa80`24f54148 : nt!KiPageFault+0x260
fffff880`0233d310 fffff880`036b72b6 : fffffa80`2c662a20 fffffa80`2c662a20 00000000`00000002 fffffa80`55864210 : nt!IoReleaseRemoveLockEx+0x21
fffff880`0233d380 fffff880`036b668b : fffffa80`26a72018 fffff880`03616200 00000000`00000000 00000000`00000000 : msiscsi!iSpProcessWMIRequestTimeout
+0x71e
fffff880`0233d420 fffff800`01868def : 00000000`00000000 00000000`00000002 00000000`00000001 fffffa80`254debd8 : msiscsi!iSpTickHandler+0x11f
fffff880`0233d460 fffff800`01889fa6 : 00000000`00000002 fffff880`0233d618 00000000`00000000 00000000`00000005 : nt!IopTimerDispatch+0x132
fffff880`0233d570 fffff800`01889326 : fffffa80`263a6440 fffffa80`263a6440 00000000`00000000 00000000`00000000 : nt!KiProcessTimerDpcTable+0x66
fffff880`0233d5e0 fffff800`01889e7e : 0000009d`127c5d6d fffff880`0233dc58 00000000`0041fc6b fffff880`023182e8 : nt!KiProcessExpiredTimerList+0xc6
fffff880`0233dc30 fffff800`01889697 : 0000009d`62ca30cb fffff880`0041fc6b fffffa80`57195bf0 00000000`0000006b : nt!KiTimerExpiration+0x1be
fffff880`0233dcd0 fffff800`018866fa : fffff880`02315180 fffff880`023202c0 00000000`00000002 fffff880`00000000 : nt!KiRetireDpcList+0x277
fffff880`0233dd80 00000000`00000000 : fffff880`0233e000 fffff880`02338000 fffff880`0233dd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb
FOLLOWUP_IP:
msiscsi!iSpProcessWMIRequestTimeout+71e
fffff880`036b72b6 33d2 xor edx,edx
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: msiscsi!iSpProcessWMIRequestTimeout+71e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: msiscsi
IMAGE_NAME: msiscsi.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bcad7
FAILURE_BUCKET_ID: X64_0xA_msiscsi!iSpProcessWMIRequestTimeout+71e
BUCKET_ID: X64_0xA_msiscsi!iSpProcessWMIRequestTimeout+71e
Followup: MachineOwner
Btw Intel 82576/82574L v11.0.103 (7/14/2009) usedWe are having a similar issue on 2 identical machines running Windows Server 2008 R2 SP1, please find one of the dumps below:
Loading Dump File [C:\Windows\Minidump\071311-11122-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (16 procs) Free x64
Product: Server, suite: TerminalServer SingleUserTS
Built by: 7600.16695.amd64fre.win7_gdr.101026-1503
Machine Name:
Kernel base = 0xfffff800`01811000 PsLoadedModuleList = 0xfffff800`01a4ee50
Debug session time: Wed Jul 13 09:16:40.467 2011 (UTC - 7:00)
System Uptime: 0 days 5:42:49.014
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck A, {4, 2, 1, fffff800018932bd}
Probably caused by : msiscsi.sys ( msiscsi!iSpProcessWMIRequestTimeout+71e )
Followup: MachineOwner
8: kd> !analyze -v
* Bugcheck Analysis
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: 0000000000000004, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800018932bd, address which referenced memory
Debugging Details:
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80001ab90e0
0000000000000004
CURRENT_IRQL: 2
FAULTING_IP:
nt!IoReleaseRemoveLockEx+21
fffff800`018932bd f0834304ff lock add dword ptr [rbx+4],0FFFFFFFFh
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: fffff8800213d180 -- (.trap 0xfffff8800213d180)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa803a27b370 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800018932bd rsp=fffff8800213d310 rbp=0000000000000000
r8=0000000000000020 r9=000000000000000d r10=fffff80001811000
r11=fffff8800213d2e0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz ac pe cy
nt!IoReleaseRemoveLockEx+0x21:
fffff800`018932bd f0834304ff lock add dword ptr [rbx+4],0FFFFFFFFh ds:0200:00000000`00000004=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80001880ca9 to fffff80001881740
STACK_TEXT:
fffff880`0213d038 fffff800`01880ca9 : 00000000`0000000a 00000000`00000004 00000000`00000002 00000000`00000001 : nt!
KeBugCheckEx
fffff880`0213d040 fffff800`0187f920 : 00000000`00000000 00000000`00000000 00000000`00000000 fffffa80`13d459a0 : nt!
KiBugCheckDispatch+0x69
fffff880`0213d180 fffff800`018932bd : 00000000`00000002 fffff800`01a265f8 fffffa80`12df4680 fffffa80`12df4788 : nt!
KiPageFault+0x260
fffff880`0213d310 fffff880`035c22b6 : fffffa80`1875b520 fffffa80`1875b520 00000000`00000002 fffffa80`3a27b370 : nt!
IoReleaseRemoveLockEx+0x21
fffff880`0213d380 fffff880`035c168b : fffffa80`18446018 fffff880`0350c200 00000000`00000000 00000000`00000000 : msiscsi!
iSpProcessWMIRequestTimeout+0x71e
fffff880`0213d420 fffff800`0186c5bf : 00000000`00000000 00000000`0000000a 00000000`00000000 fffff800`01968fc5 : msiscsi!
iSpTickHandler+0x11f
fffff880`0213d460 fffff800`0188d29e : 00000000`00000002 fffff880`0213d618 00000000`00000000 00000000`00000100 : nt!
IopTimerDispatch+0x132
fffff880`0213d570 fffff800`0188cdd6 : fffffa80`3694fca0 fffffa80`3694fca0 00000000`00000000 00000000`00000000 : nt!
KiProcessTimerDpcTable+0x66
fffff880`0213d5e0 fffff800`0188d4be : 0000002f`e41691a8 fffff880`0213dc58 00000000`00141e76 fffff880`02118448 : nt!
KiProcessExpiredTimerList+0xc6
fffff880`0213dc30 fffff800`0188ccb7 : 0000000b`39bb96c3 0000000b`00141e76 0000000b`39bb9698 00000000`00000076 : nt!
KiTimerExpiration+0x1be
fffff880`0213dcd0 fffff800`01889eea : fffff880`02115180 fffff880`021202c0 00000000`00000001 fffff880`00000000 : nt!
KiRetireDpcList+0x277
fffff880`0213dd80 00000000`00000000 : fffff880`0213e000 fffff880`02138000 fffff880`0213dd40 00000000`00000000 : nt!
KiIdleLoop+0x5a
STACK_COMMAND: kb
FOLLOWUP_IP:
msiscsi!iSpProcessWMIRequestTimeout+71e
fffff880`035c22b6 33d2 xor edx,edx
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: msiscsi!iSpProcessWMIRequestTimeout+71e
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: msiscsi
IMAGE_NAME: msiscsi.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bcad7
FAILURE_BUCKET_ID: X64_0xA_msiscsi!iSpProcessWMIRequestTimeout+71e
BUCKET_ID: X64_0xA_msiscsi!iSpProcessWMIRequestTimeout+71e
Followup: MachineOwner -
I have been trying to set up OIF on a Windows 2008 machine. I can install the DB (11gR2) and Weblogic Server (10.3.5). When I try to run the Oracle Universal Installer (11.1.1.2) installing but not configuring, it works properly. I then patch that using the OUI 11.1.1.5, and that also works fine. The problem comes when I try to configure. I get through the entire specification process and I choose to create a new domain (I only am installing OIF and the associated software needed for that) but when it starts the actual configuration it stalls. I checked the logs and get this:
[2012-02-09T11:55:08.393-05:00] [as] [ERROR] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidConnection] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Exception[[
java.io.IOException: Couldn't connect to any host
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:187)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:81)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at oracle.as.install.common.handlers.weblogicQueries.IsValidConnection.initConnection(IsValidConnection.java:415)
at oracle.as.install.common.handlers.weblogicQueries.IsValidConnection.executeHandler(IsValidConnection.java:237)
at oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper.execute(HandlerLauncher.java:487)
at oracle.as.install.engine.modules.handler.engine.HandlerLauncher$LaunchHelper.launch(HandlerLauncher.java:413)
at oracle.as.install.engine.modules.handler.engine.HandlerLauncher.execute(HandlerLauncher.java:178)
at oracle.as.install.engine.modules.handler.engine.HandlerEngine.execute(HandlerEngine.java:137)
at oracle.as.install.engine.modules.handler.HandlerModule.performOperation(HandlerModule.java:455)
at oracle.as.install.engine.modules.handler.HandlerModule.performInputValidations(HandlerModule.java:413)
at oracle.as.install.engine.modules.handler.HandlerModule.processModuleEvent(HandlerModule.java:332)
at oracle.as.install.engine.modules.util.PartnerModuleImpl.processEvent(PartnerModuleImpl.java:118)
at oracle.as.install.engine.InstallEngine.notifyListeners(InstallEngine.java:626)
at oracle.as.install.engine.InstallEngine.processEvent(InstallEngine.java:584)
at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyAllEventListenersHelper(PartnerModuleImpl.java:227)
at oracle.as.install.engine.modules.util.PartnerModuleImpl.notifyListeners(PartnerModuleImpl.java:191)
at oracle.as.install.engine.modules.presentation.PresentationModule.executeModifiedDWizardEvent(PresentationModule.java:716)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.fireValidationEvent(ModifiedDWizard.java:3183)
at oracle.as.install.engine.modules.presentation.ui.common.wizard.ModifiedDWizard.doNext(ModifiedDWizard.java:922)
at oracle.bali.ewt.wizard.BaseWizard$Action.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.Component.processMouseEvent(Component.java:6289)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6054)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4652)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4482)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$2.run(EventQueue.java:617)
at java.awt.EventQueue$2.run(EventQueue.java:615)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: javax.naming.NamingException: Couldn't connect to any host [Root exception is org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: Maybe]
at weblogic.corba.j2ee.naming.Utils.wrapNamingException(Utils.java:83)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReferenceWithRetry(ORBHelper.java:605)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReference(ORBHelper.java:559)
at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:85)
at weblogic.corba.j2ee.naming.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:31)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:46)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:169)
... 57 more
Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 203 completed: Maybe
at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2259)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.writeErrorSend(ORBUtilSystemException.java:2277)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.sendWithoutLock(SocketOrChannelConnectionImpl.java:1066)
at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendFragment(BufferManagerWriteStream.java:90)
at com.sun.corba.se.impl.encoding.BufferManagerWriteStream.sendMessage(BufferManagerWriteStream.java:104)
at com.sun.corba.se.impl.encoding.CDROutputObject.finishSendingMessage(CDROutputObject.java:144)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.finishSendingRequest(CorbaMessageMediatorImpl.java:247)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete1(CorbaClientRequestDispatcherImpl.java:355)
at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:336)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:129)
at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.non_existent(CorbaClientDelegateImpl.java:232)
at org.omg.CORBA.portable.ObjectImpl._non_existent(ObjectImpl.java:137)
at weblogic.corba.j2ee.naming.ORBHelper.getORBReferenceWithRetry(ORBHelper.java:590)
... 66 more
Caused by: java.io.IOException: write not supported
at weblogic.corba.client.cluster.DummySocket$2.write(DummySocket.java:35)
at java.io.OutputStream.write(OutputStream.java:99)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.write(SocketOrChannelConnectionImpl.java:724)
at com.sun.corba.se.impl.encoding.CDROutputObject.writeTo(CDROutputObject.java:174)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.sendWithoutLock(SocketOrChannelConnectionImpl.java:1016)
... 76 more
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidConnection] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] errID ====>>>>:INST-07242
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidConnection] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Error:Error in obtaining connection with Oracle WebLogic Middleware Administration Server
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidConnection] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Cause:Unable to connect to Oracle WebLogic Middleware Administration Server.
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidConnection] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Action:Make sure the Oracle Middleware Administration Server is up and hostname, port, user name and administration password are correct
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.weblogicQueries.isValidConnection] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Exiting method executeHandler
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Handler launch end: weblogicQueries.isValidConnection
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Handler returned status: FAILED
[2012-02-09T11:55:08.393-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Error in obtaining connection with Oracle WebLogic Middleware Administration Server
[2012-02-09T11:55:19.564-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Processing the validation event
[2012-02-09T11:55:19.564-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Setting valueOf(DOMAIN_PORT_NO) to:7001. Value obtained from:USER
[2012-02-09T11:55:19.564-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Setting valueOf(DOMAIN_PORT_NO) to:1521. Value obtained from:USER
[2012-02-09T11:55:19.564-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Inputs passed to the handler: [ Join Domain Port ( field ) = "Port" ], [ DOMAIN_PORT_NO ( value ) = "1521" ]
[2012-02-09T11:55:19.564-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Handler launch begin: txtQueries.isNumber
[2012-02-09T11:55:19.564-05:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.validation.oracle.as.install.engine.modules.validation.handler.txtQueries.isNumber] [tid: 11] [ecid: 0000JLZ2VjAALQ05zzT4iW1FCzd5000002,0] Entering method executeHandler
It's telling me it can't connect to the host, but nowhere am I asked to provide any information about that. I've googled this, but I can't seem to find any information. Also worth noting, I had to significantly shorten the error log because it was too long.hi Guru's.. please advice.
Maybe you are looking for
-
IDT BICS Connection Slow Listing Infoareas
Hi, We are having an issue when we create a BICS connection and trying to browse to select a query it takes a long time to list infoareas, cubes, and queries. Our environment is BO4 SP6P1 against SAP BW 7.3. When we use the search feature to fin
-
Hi all I want to manage a weight items on a window "Purchase Order" that is to say: Total Payment Due =(weight x Unitprice) + Tax ; and how do appears a weight items column in "Stock Posting List". Thanks
-
I just purchased the Adobe ExportPD, which should convert existing files to Microsoft word for easy editing. Yet after exporting the document from PDF to word, I am unable to edit the document. Can someone please tell me what other steps I should t
-
Pixi able to have different ringtones for different callers??
So after about 4 years I finally had to get rid of my trusty Treo 650. I went with the Pixi and just got it a few hours ago. So far I like the phone, but have not been able to figure out how to set up different ringtones for different callers. I a
-
I have no cellular data tab on my iPhone 3GS, does anyone know how i can get this?