Windows 2008 not allocating more than 8GB of memory to all processes

Hi,
We have a web server with windows 2008 R2 on Amazon-EC2. Recently we have upgraded our server from one instance type to a higher one. New one has around 68GB of memory. How ever overall allocation of memory is not going above 8GB.
When I looked at w3wp in process explorer, I have observed "\KernelObjects\MaximumCommitCondition" and "KernelObjects\LowMemoryCondition" kernel events. I could not understand the reason for "low memory" events in spite
of the 60GB of available memory.
At any point of time %committedBytesInUse counter is showing only 5%.
Can someone help me in making me understand on what is going wrong here?
-Sudhakar
Sudhakar

was VM? was the VM configured with dynamic memory?
Best,
Howtodo

Similar Messages

Will not regognise more than 8GB of memory

I have a MSI Z77A-GD6 with i7 3770K and 16GB Team Xtreem 16GB (4x4GB) DDR3 PC3-17000C9 2133MHz. I have tested every stick in slot one individual to rule out faulty sticks all boot fine. when i use slot 1 and 3 8GB recognized and the same with 2 and 4, but when i put all the sticks in still boots but only show 8GB instead of the 16GB in both bios and Windows. I have already done a bios update cleared CMOS Can anyone please help

Are they currently running platform default 1600? 1333? Have you tried X.M.P. setting?
Added: Here is a link to a beta with lots of items in the change log;
>> Beta Thread <<

It is possible to expand more than 8gb on memory ram?

hi i have a question it is possible to expand more than 8gb on memory ram in the macbook pro 15 inch??

No you do not lose your Apple warranty. However the RAM is not covered, so buy RAM from a vendor who offers a lifetime warranty.
Ciao.

Could the late 2008 MBP take more than 8GB of RAM?

I just recently upgraded the RAM on my late 2008 15" MacBook Pro from 2GB to 8GB, and this sucker's running like a sports car! So this has me wondering. I have babied this thing, and it is plenty powerful for me but what happens 2-3 more years down the road? I had read that the late 2008 models originally could only handle up to 6GB but do to a fimware update in April of 2010 that capacity was upped to 8GB. Is there ever a chance that the RAM capacity could go up again? If not, why?

you're probably stuck at 8GB - i wish i can upgrade my late 08 Macbook to more than 8GB - tried it, but never worked - gave it to my niece instead.
i don't really think you'd use more if you're just running normal apps.
have a look at the image below - that's my macbook with 16GB and have 9 apps running - see how much I have free?
by the time you need more than 8GB - you'll probably buy a new macbook by then - do remember, new macbooks are still selling with 4GB of RAM installed in them.
good luck

MSI MS-7200 945G Express will not recognize more than 3 GB

Hello, I just got the MSI board with the Intel 945G chipset, I put in 4x1 GB sticks of RAM, but the BIOS and Windows will not recognize more than 3 GB even though in the specs it says it supports 4 GB. When I use 3 Sticks, the RAM the BIOS displays is 3072MB, with 4 sticks, it displays 3196 MB. I upgraded to the latest BIOS and drivers. Am I missing something? or is this the way it supposed to be?
Thanks

You need to use XP 64 bit to have it recognize more than 3-3.5 gigs.
Windows xp home and pro are 32 bit limited. They can see only 3.5 gigs even though you really have 4. You also will only be able to allocate a max of 2 gigs per process in windows xp home and xp pro.
To beable to see 4 gigs, and alocate more than 2 gigs per proccess you have to run a 64 bit OS. IE windows xp pro 64bit version or windows server 2003 64 bit version.(same thing).

Problems deploying Windows 7 x64 computers with more than 8GB RAM

SCCM 2012 R2 CU1
Windows 7 x64
We have a weird problem after upgrading from SP1 to R2 CU1. We have built a Windows 7 64 bit image with the latest updates (currently September 2014 updates). It deploys fine to all computers. But after some days – don’t know exactly – guess after 4-7 days
- we start getting errors on computers with more than 8 GB of RAM. The errors just start out of the blue. We didn't change TS, image or driver package.
The error shows in 3 different ways – depending of the computer model.
1) BSOD – STOP 0x000000F4. Disk error.
2) Task Sequence error 0x87D00269 when installing the first Application in TS. The error seems to have something to do with Management Point not found.
3) Task Sequence simply stops after installing CMclient. No errors - it simply stops.
For instance we get the BSOD on the Lenovo ThinkCentre M93p. But on the ThinkCentre M83 we get the TS error 0x87D00269. M93p and M83 uses the same driver package. They consequently fail every time after the error has begun. If we reduce (remove physically)
the memory to max. 8GB of RAM, they successfully run the Task Sequence. We get the above errors on both Lenovo and HP machines with more than 8GB.
I made a copy of the production TS and started testing. I created a new driver package for M93p/M83. It contains only the NIC drivers. Now M93p an M83 successfully finishes the TS. Adding sata or chipset or MEI/SOL drivers to the package I get the 0x87D00269
error on both m93p and M83. At least not the BSOD on the M93p ;-)
Tried setting SMSTSMPListRequestTimeout to 180 in the TS. Also tried putting in a 5 minute break before installing the first Application in the TS. Also tried putting in SMSMP=mp1.mydomain in the installation properties for the CMclient. It is still
the same problem.
Investigating the smsts.log on a computer with the 0x87D00269 error.
Policy Evaluation failed, hr=0x87d00269 InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_654E40B7-FC55-4213-B807-B97383283607/Application_d9eea5a0-0660-43e6-94b8-13983890bae2'=''InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
EvaluationJob complete InstallApplication25-09-2014 08:59:59 3020 (0x0BCC)
MP list missing in WMI, sending message to location service to retrieve MP list and retrying. InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
m_hResult, HRESULT=87d00269 (e:\qfe\nts\sms\client\osdeployment\installapplication\installapplication.cpp,1080) InstallApplication
25-09-2014 08:59:59 3020 (0x0BCC)
Step 2 out of 2 complete InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Install application action failed: 'SCIENCE PC Guide'. Error Code 0x87d00269 InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Sending error status message InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Setting URL = http://mp1.mydomain, Ports = 80,443, CRL = false InstallApplication 25-09-2014 08:59:59 3020 (0x0BCC)
Investegating the 0x87D00269 error on the siteservers Status Messages Queries is weird.
Install Static Applications failed, hr=0x87d00269. The operating system reported error 617: You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that
you have not previously used.
Hopefully this is a bug in translating the errorcodes? Just to be sure I checked all the SCCM serviceaccounts and none of them have expired passwords. And again why only on computers with more than 8GB RAM.
Anyone else had problems rolling computers with more than 8GB og RAM?
Why does this happens after a few days? To begin with, it runs just perfect and then starts failing on all machines with more than 8GB. Without a change in TS, image and driverpackage. We have seen this pattern for the last 3 month after
updating our image with the latest Windows Updates. It all started after updating from SP1 to R2 CU1.
Why does it only affect machines with more than 8GB RAM?
How to get rid of the 0x87D00269 error?
Seems to be somehow related to driver installation mechanism in SCCM in combination with Windows 7 64 bit, +8GB RAM and SCCM 2012 R2 CU1 or perhaps just R2.
Any help or hints would be appreciated!
Thanks
Anders

We have the same workaround, using a x64 boot image resolved all our issues with WinPE 5.0.
Machines with >4GB of RAM
Lenovo ThinkPad T540p failed applying drivers with 80040005
Black screen/white cursor issues intermittently
No updates from Microsoft, they are still looking through the logs, but we have updated our boot images and all is well now. Our case it still open with Microsoft, they are researching the logs.
Daniel Ratliff | http://www.PotentEngineer.com

Firefox will not open more than one window and upon restarting will not open the previous tab and refuses to open bookmarks

Firefox does not open more than one window. I can open plenty of tabs, but not more than one window. Upon closing firefox and trying to restart the browser will not open and needs to be closed through windows task manager. Upon trying to re-open Firefox I receive the 'oops this is embarassing , firefox cannot re-open your tabs" message. When I click on "new session" the bookmarks do not load. It is becoming very frustrating as I am a student and often do lots of research on the web while using lots of open windows.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
See also "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
Please help me!

We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

Not able backup files to tape more than 8GB

while trying to backup a file more than 8GB using tar to tape i am getting too large to archive in solaris 10 sparc , i have tried using E option & gtar but same result

What the tape size you are using? If the tape capacity is only 8 GB you will not able to write a 8 GB backup into it.
Edited by: Soorya on Feb 12, 2012 4:33 AM

K5400 will not print more than one page at a time.

The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, Marion

Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us.

You can not authorize more than 5 computers

I have music on my MacBook Pro, in iTunes, that I want to use, but it comes from an old account, that I don't use anymore, and some computers/iPods that are really not working. When I want to ear those musics/songs, I receive this message, when trying to enter the account, old, not the actual one: "you can not authorize more than 5 computers"
What can I do?

I quote:
You can deauthorize all computers connected to your Apple ID if you've reached the maximum five authorizations:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
(end quote): once done you can then re-authorise computers as needed.

Oracle 9,2.0 32 bit for Solaris can not access more than 4GB?

I am sorry to ask rather stupid question.
I joined company which has big SUN Fire running Solaris 9 64bit version.
It has system memory 16GB and 8 CPUs.
I found 8GB memory reported as free. It is production box. It is heavy loaded.
I guess Kernel parameter settings for Oracle set too low.
I reported DBA and asked DBA to improve.
My DBA said Oracle 32 bit version was installed and Oracle 32bit can't access more than 4GB system memory.
Is it true that Oracle 9.2.0 32bit for Solaris can not access more than 4GB memory?
32bit CPU and 32bit OS might have problem in access big memory.
But I never heard Oracle 9 running on 64bit Solaris box can not access more than 4GB.
Specially on Sparc 64bit chip and Solaris 9 64bit version.
I searched forums and could not find good answer. I believe it is rather obvious.
Please help me on this. I will be greatly appreciated.
Thanks in advance.
Message was edited by:
user524303

I was really surprised by the fact that almighty
ORACLE can not access 4GB memory.
So, it is true that 32bit Oracle is limited by 4GB RAM.Nope. 32bit almighty anything is limited to (max) 2^32 virtual adresses on a vmm system.
Often there is also some split where memory is divided into system and user areas, where user (program) has e.g. 2 or 3GB. All this works regardless of amount of RAM available 0.5 or 512GB.
Perhaps this link provides some useful info/background.

[svn] 3739: Fixing recent change to prelink to not run more than once for compc.

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Revision: 3739
Author: [email protected]
Date: 2008-10-19 09:54:37 -0700 (Sun, 19 Oct 2008)
Log Message:
Fixing recent change to prelink to not run more than once for compc.
QE: Yes
Doc: No
Checkintests: Pass
Reviewer: Gaurav
Bugs:
SDK-17411 - Font embedding not working for mxml class
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17411
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/CompilerAPI.java

Can not sync more than 420 songs

I am currently using an i phone 5 (64GB).
I have an issue where i tunes does not sync more than 420 songs from my compute (Window 8) to my i phone.
Can someone please help me to fix this issue. Thank you

I think you need to update your iTunes to the latest iTunes 12 and follow the steps here Sync your iPhone, iPad and iPod with iTunes using USB

Purchase Order Quantity should not be more than PR quantity

Dear all,
We want to control Purchase Order quantity against Purchase Requisition.
We have configured message setting 00 076 as ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
Is there any other way to have such control? please provide other available options to configure.
Regards
Kant

Hi,
06 076 is only for applicable only in case of material.
For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
NOtes 786736
This may help u !
Regards,
Pardeep malik

Windows 2008 not allocating more than 8GB of memory to all processes

Similar Messages

Maybe you are looking for