Windows 2008 r2 ethernet problem on UCS

i have installed windows 2008 R2 on a B440 M2 and having issues with the network. not able to ping even the default gateway or any other servers on the same network/vlan
an esx server in the same VLAN works fine.
i know this is only partial information, but was wondering if there was some config off the top that i am missing
p.s. my chassis has the palo card

The most common issue I see in this instance is that the servrice profile associated with Windows does not have the associated vlan marked as native.
- Confirm the service profile has the appropiate vlan
- Confirm the vlan is marked as native
- Can the windows OS ping other hosts on the same subet in the same UCS chassis
- Is there an impact if you force traffic over fabric A or B.
HTH,
Dan

Similar Messages

Windows 2008 Server Standard - Problems Printing

I have an issue with a server that we are currently setting up in a bus station.
There are 6 machines in total, one is the server which is running Windows Server 2008 Standard 32bit SP2, the other 5 are the client machines which are all running Windows 7 Pro 64bit SP1.
All 6 machines are all linked together on the same domain and they all speak to each other, i.e all ping each other.
The issue we now have is that we have 5 printers to link to the network, all the prints are plugged directly into the Ethernet sockets on the wall which then go to the switch. The prints all have ips assigned to them and the server will see them but will
not communicate with them. If we try to ping any of the printers it fails.
We have loaded print service/print management on the server and we can set up the printers through that. Again we get the error that it is not communicating with the printer so it asks you to load the driver manually(gives us a huge lists of makes and models).
In the network list through control panel we dont get a list of printers.
If anyone can help that would be great and could let us know what we are doing wrong.
If i have missed anything important out please let me know.
thanks

Until you determine the underlying network transport problem this has nothing to do with printing.
Get the network configured so you can ping or use tracert to the IP of the device. It's possible the printers are not properly configured for your network but once again not a printing issue at this point but a networking issue.
Alan Morris Windows Printing Team

Windows 2008 in UCS B200 Blade NIC VLAN problem

Hello Experts,
I've installed Windows 2008 Enterprise on Bare-metal UCS B-200 M2 server with VIC M81KR Mezannine card. UCS Manager version is 1.3(c).
The Problem that I have is that I cannot define VLANs on the NIC adapter inside Windows. is this a problem with the NIC driver ?
( Other NIC cards in other machine for example, have Advnaced Tab in the network configuration where we can define VLANs ).
( in this situation, Windows is un-aware of the VLANs so all the traffic going out will be untagged and FI sending it to the native VLAN on the network).
Attached is a screenshot of the NIC properties in Windows. Your help is highly appreciated on this.
Regards,
Mohammad

Thank you for your answer Padma.
I have simple requirement for this to work. I have two blades windows installed on them and NICs having IPs from the range of VLAN 100 ( IP range : 192.168.100.x). Now I need to reach these two windows machines from other subnets ( subnet VLAN 2 for example / range 192.168.2.x ).
In this scenario, I cannot reach these two windows machines until I define VLAN 100 as native ( default ) in vNIC configuration in the service profile of the balde. ( I understand that windows is sending the traffic un-tagged and because VLAN 100 is the native VLAN in UCS manager, it will forward this un-tagged traffic to VLAN 100 where it is routed to VLAN 2 in our case ).
Do you have any other suggestions for other configuration for these windows machine to be reached from different VLANs in our network ?
Thanks,
Mohammad

HUM 1.2 and Windows 2008 - Server

Hello,
it is possible to run HUM with Windows 2008-Server? Problem is: It runns always CWLMS 3.2 and the customer wantes to add HUM. The hardware is not the problem.

There is both client and server support for Windows 2008 in Ciscoworks LMS starting with release
3.2 (Common Services V3.3). Please have a look at the following links:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_common_services_software/3.3/release/notes/cs33rel.html#wp79176
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/overview.html#wp1086601
Regards
Farrukh

Windows 2008 R2 on Cisco UCS B200M networking problems

This is driving me completely nuts. Let me start by saying I am new to blade servers and Cisco UCS. I did take an introduction class, and it seemed straight-forward enough. I have a chassis with two B200M blades, on which I am trying to configure two Windows 2008 R2 servers, which I will eventually make Hyper-V servers. This is all in a test environment, so I can do anything I want to on them.
Right now I have installed W2008 directly on hard disks on the B200M hardware.
The problem is this: even though I think I've configured the network hardware correctly, using the Cisco VIC driver software, I cannot get networking to work in any reliable way. I cannot even get ping to work consistantly. I can ping my local server address, but I cannot ping my gateway (HSRP address). When I try, I get a "Reply from 10.100.1.x: Destination host unreachable (x being each particular server's last octet). I CAN, however, ping the individual IP addresses of the core switches. I can also ping some, but not all, the other devices that share the servers' subnet. There are no errors being generated, the arp tables (for those devices I can ping) look good, netstat looks OK. But I cannot get outside the local subnet...
Except when I can.
There are times when I can get all the way out to the Internet, and I can download patches from Microsoft. When it works, it works as expected. But if I reboot the server, oftentimes networking stops working. Yet another reboot can get things going again. This happens even though I've made no changes to either the UCS configs or the OS.
I cannot figure out any reason when it works at some times and not at others. I've made sure I have a native VLAN set, I've tried pinning to specific ports on the Fabric Interconnects. There is just no rhyme or reason to it.
Anyone know of where I can look? I'm very familiar with Windows on stand-alone boxes (although it's no longer my area of expertise), and I manage a global WAN (BGP, OSPF, Nexus 7k, etc.) so I'm no dummy when it comes to networking, but I am utterly stumped on this one.

The problem was this: while the NICs on the blade server are called vNIC0 and vNIC1, Windows was calling vNIC1 "Local Area Connection" and vNIC0 "Local Area Connection 2". So what I configured on UCS did not match what I was configuring in Windows. Completely, utterly ridiculous.
Anyway, networking is working now without any issues. Thanks for you suggestion; it did get me looking in the right direction.

Unable to load driver for Storage for Windows 2008 UCS B230 M2

I am trying to Boot from SAN windows 2008 R2. I have configured and connected the Cisco UCS Chassis and FI to our Network & Storage .I am having problem to install Windows 2008 R2 Server on Blades as it is not able to see Storage LUN while installation .I downloaded drivers from Cisco Support Site.
I tried drivers from ISO ucs-bxxx-drivers.2.1.3 latest version but Windows is showing driver is available but not installing the driver I am getting the following error and not showing the LUN hard disk to select the installation.
Windows is unabe to locate storage LUN. I am able to LUN while booting process.
I am not sure where I am doing wrong.or I am chosing wrong driver.

I don't see the error message either, but to install W2008 on a boot lun, you must
1) do the zoning of the vhba (initiator) to the pwwn of the storage subsystem port (target)
2) the lun masking / mapping has to be setup
3) fnic driver has to be installed
Therefore, if you don't see your boot lun, either 1) and or 2) has to be fixed
then
4) only one path should be configured (e.g. fabric a), because no multipathing is available during installation, this is very important, and necessary for W2003, 2008 and 2012
and
5) if you see the boot lun, and can install, but the boot fails, the problem is the boot policy !
Very easy ! Good luck !

Ethernet problem on 3 2008 Mac Pro's 10.6.8

slow or crashing file transfers on 2008 Mac Pro's running 10.6.8 with entirely new cat6 wired LAN with all new switches. Seems like ethernet cards in 3 of our older Mac Pro's don't want to play nice at gigabit speed but a newer Mac Pro w/Lion is running fine. HELP!
The entire network, many laptops and a few servers and desktops all running fine on our new LAN.
Prepress network is set up with several Mac Pro's and a Windows 2008 Server running with ExtremeZIP, all the Mac's work off files that are on shares on the server but now when trying to copy files from one share to another from 3 of our older Mac Pro's running 10.6.8 the files sometimes make it...sometimes crash the entire Mac or sometimes just stall out with the pinwheel of death.

Yes and No on the Jumbo Frames....the server and all of our switches are at 1500 MTU's...but I tried it anyway on one of the Mac Pro's giving us this problem and it did not help.
What has helped is maually setting the cards on the Mac Pro's to 100baseTX, which of course defeats the purpose of our new gigabit LAN.
I spoke with OWC about this problem and the possibility of an upgrade to a newer Sonnet ethernet card compatiible with these Mac Pro's as a fix and they said while a new card would probably fix the problem that they were a little stumped with the issue we are having.
Needless to say it is very frustrating!!
All switches are set for 1500/full duplex....green lights on the ports where these Mac Pro's are plugged into.

11g GC Installation Problem on Windows 2008

Hi All
I am facing a problem installing 11GC on Windows 2008. The installer will not get past "Step 12 - Agent Configuration Assistant" - it shows as FAILED.
My setup is as following:
- GCSERVER: where I am installing GC - Windows 2008 R1 32-bit (Actually a VMware VM)
- DBSERVER: where em repository db resides - Windows 2008 R1 64-bit (Physical Server)
The steps I have followed:
- Created a new database called emrep111 (11.1.0.7) on DBSERVER
- Installed WL Server (10.3.2) on GCSERVER
- Run GC 11.1.0.1.0 for Win32 on GCSERVER and then get error
I have to cancel the installation at this stage, however, I would have expected by the time it gets to this stage it would have done the important stuff, however, when I browse to the EM URL I get "Backend WLS or EM application seems to be down".
If anyone has any experience of 11g GC on Windows I would be grateful if you have any advice on Troubleshooting this problem.
Regards
Alan

Hi All,
a short intermediate result:
Oracle Support is working on the problem. Today they asked me to perform the following action:
set EM_SECURE_VERBOSE=true
+<agent_home>\bin>emctl secure agent+
If you take a look at the generated log file '<agent_home>\sysman\log\secure.log' you can see that OMS does not respond correctly:
[27-07-2010 10:06:50] USERINFO ::Securing agent... Started.
[27-07-2010 10:06:50] DEBUG ::Executing ... D:\oracle\product\em\agent11g\jdk\jre/bin/java -cp D:/oracle/product/em/agent11g/jdbc/lib/ojdbc5.jar;D:/oracle/product/em/agent11g/lib/xmlparserv2.jar;D:\oracle\product\em\agent11g/sysman/jlib/log4j-core.jar;D:/oracle/product/em/agent11g/jlib/share.jar;D:/oracle/product/em/agent11g/jlib/http_client.jar;D:/oracle/product/em/agent11g/jlib/jssl-1_1.jar;D:/oracle/product/em/agent11g/jlib/ojmisc.jar;D:/oracle/product/em/agent11g/opmn/lib/optic.jar;D:\oracle\product\em\agent11g/sysman/jlib/emagentRT.jar;D:\oracle\product\em\agent11g/sysman/jlib/emagentSDK.jar;D:/oracle/product/em/agent11g/lib/dms.jar;D:/oracle/product/em/agent11g/lib/dmsEmd.jar;D:\oracle\product\em\agent11g/sysman/jlib/emcoreAgent.jar;D:/oracle/product/em/agent11g/modules/oracle.http_client_11.1.1.jar -DEMSTATE=D:\oracle\product\em\agent11g -Ddebug=true oracle.sysman.emctl.secure.agent.SecureAgentCmd
2010-07-27 10:06:56,352 [main] INFO agent.SecureAgentCmd secureAgent.226 - Requesting an HTTPS Upload URL from the OMS
2010-07-27 10:06:56,368 [main] INFO agent.SecureAgentCmd openPage.829 - Opening: https://BTNDBSRV4.btnntdom.local:1159/em/genwallet
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd openPage.855 - Response Status Code: 200
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd openPage.863 - RESPONSE_STATUS header: null
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd openPage.864 - Response body: <head><title>OMS is unavailable</title></head><body><br><br><div align=center><b><font size=5>Backend WLS or EM application seems to be down</font></b></div></body>
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd getOMSSecurePort.809 - Non-numeric response obtained: <head><title>OMS is unavailable</title></head><body><br><br><div align=center><b><font size=5>Backend WLS or EM application seems to be down</font></b></div></body>
2010-07-27 10:07:15,166 [main] INFO agent.SecureAgentCmd getOMSSecurePort.811 - OMS Secure Port: -1
2010-07-27 10:07:15,166 [main] ERROR agent.SecureAgentCmd secureAgent.231 - The OMS is not set up for Enterprise Manager Security.
2010-07-27 10:07:15,166 [main] ERROR agent.SecureAgentCmd main.210 - Failed to secure the Agent:
java.lang.Exception: The OMS is not set up for Enterprise Manager Security.
at oracle.sysman.emctl.secure.agent.SecureAgentCmd.secureAgent(SecureAgentCmd.java:232)
at oracle.sysman.emctl.secure.agent.SecureAgentCmd.main(SecureAgentCmd.java:203)
I'm curious about the next steps from Oracle Support.
Best rgds
Kai

Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

Hello
I have HP server with Windows 2008 Server R2 64bit. I installed
latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes
after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
Can anyone met with this configuration and knows how to solve
problem?
This is the link to my strange alert log file:
http://www.2shared.com/file/22MFap1V/alert_orcl.html
I attached my spfile.ora file too:
http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
Last questison: Have you upgraded your database after you installed the patch?
SQL> SHUTDOWN IMMEDIATE
SQL> STARTUP UPGRADE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Problems setting up WNA with OAS 10.1.2.0.2 and Windows 2008

Hi,
I am trying to set up WNA with an OAS 10.1.2.0.2 in a RHEL 4 platform. I have been able to configure Synchronization and Windows External Authentication following these steps:
http://download.oracle.com/docs/cd/B14099_19/idmanage.1012/b14085/odip_actdir003.htm#i1010999
I have also tried to configure WNA without success with those steps.
The scenario is here:
* OAS 10.1.2.0.2 infra in a RHEL 4
* Windows 2008 SP1 (only i use AD from it)
* Windows XP (client) that should be able to log in without problems when WNA is configured
How can make it work? I haven´t find any useful documentation
Thanks,
Max

Check these out:
http://www.freeoraclehelp.com/2011/09/oid-integration-with-ms-active.html
http://www.freeoraclehelp.com/2011/09/enable-ssl-for-oid-instance-of-oracle.html
http://www.freeoraclehelp.com/2011/09/oracle-password-filter-to-sync.html

Windows 2008 R2 Folder assign permission "Read and Write" problem with *.doc file

Hello All,
I am a new one here,
I am sorry for any mistakes and also my english is so poor.
M Brother company runing Windows 2008 R2 as Active Directory...
We have folder Name: Admin
and in this folder, there are alot documents files as : *.doc, *.dwg, *.txt etc.....
All user accesing to these files and they can open to edit and save...
One day my brother want me to set Admin folder for all users just"Read and Write.." mean they still can open files to edit and save... but can't delete..
I did success with this..
But only one thing happen.. when they open *.doc file to edit and attempting to save, the message alert" access denide " and they can only "SAVE AS"...We don't want "Save as"
Could you show me how can we fix error with *.doc file while they trying to save? because it allow only save as.. but other files as *.text file or *.dwg they can save without problem..
Could expert here ever face this issues and fix by yourself, please share me with this..
Please help me..
Best regards,

Hi,
Office programs are specific. They will create a temp file when edit, then the temp file will be deleted when close. So Delete permission is needed for users to saving Office files like Excel/Word.
For more detaile information, please refer to the thread below:
Special Permissions - User cannot save files
http://social.technet.microsoft.com/Forums/windowsserver/en-US/721fb2f1-205b-46e5-a3dc-3029e5df9b5b/special-permissions-user-cannot-save-files
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Performance problems on a Oracle 11G with Windows 2008 64bits.

Hi everyone,
I have noticed that our db is going low and low every week. My server has 16GB RAM and 10GB are dedicated to the Oracle database, this is a 11.2.0.1 with Windows 2008 R2 SP1 64bits. I like to know acording to the nexts values what you guys recommend to adjust in the init.ora:
orcl.__db_cache_size=5402263552
orcl.__java_pool_size=33554432
orcl.__large_pool_size=33554432
orcl.__pga_aggregate_target=3657433088
orcl.__sga_target=6878658560
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=1308622848
orcl.__streams_pool_size=33554432
*.memory_target=10511974400
*.open_cursors=5000
*.optimizer_mode='RULE'
*.processes=300
Acording to the memory target on how values can be increased the processes, pga_agregate_target, etc.
Also we have problems related to the bug Bug 9593134 that “Connections to Oracle 11g are slow and can take anywhere from 10 seconds to 2 minutes.” there is a fix on linux by removing the dns names on it but anyone have experience on windows platforms?
Thanks for all and sorry for my english.
Regards.
Arturo.

Regarding the long connection times, have you tried using network packet capture software (such as Wireshark) to determine what the client computer is doing when a connection attempt is initiated?
The Oracle Database time model statistics, along with the system wide wait events may help you diagnose the non-connection related performance issues (you should not just look at the statistics, but instead capture the current values, wait a period of time, capture the statistics again, and compare the changes in the statistic values). A statspack report might also help you - but a 10046 trace at level 8 or 12 is more appropriate if you are able to identify a couple of sessions that experience performance problems.
I do not suggest just blindly modifying parameters, although I am curious to know:
* Why the session level parameter OPEN_CURSORS is set to 5000 - do you expect a single session to hold open 5,000 cursors?
* Why are you using the deprecated RULE based optimizer?
* Why is the MEMORY_TARGET parameter used when the SGA_TARGET and PGA_AGGREGATE target are specified?
Charles Hooper
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.

Problem with upgrade Windows 2003 to Windows 2008

Hi,
I have problem with upgrade Windows 2003 to Windows 2008 R2
When I run installer it check compatibility drivers and programs after that appear message that I need to uninstall "adaptec storage manager" but I already remove this driver from the system and registry.
Any ideas to solve this problem?
My server it's IBM System x3500
Regards

Not sure if this issue was solved or no longer relevant, but I had the same issue with the same IBM x3500 server type.
Based on the SETUPACT.LOG output from the Server 2003 to 2008 upgrade compatibility check, the problem was that the driver AACMGT.SYS is unsigned, and hence not acceptable for running in Windows Server 2008.
AACMGT.SYS is a part of IBM ServeRAID but unfortunately, even the latest versions 9.3 to not seem to update or replace this file. It's also possible this file is a residue of an earlier, deprecated version of ServeRAID, I don't know.
In the end, to get passed the Upgrade check hard stop, I did this, though I'm not sure if all steps are needed:
0. Make sure you have a system backup in case you break something doing this steps. If you do break your system and cannot recover from backups, it's not my fault!
1. Go into Device Manager --> Disks and check the Driver properties for the disks on your system. You might have AACMGT.SYS listed for some/all disks and also listed as unsigned.
2. Uninstall IBM ServeRAID from the system, just in case
3. Do into Device Manager and go under Disks, and manually Uninstall all the disks in the list including "AdaptecArray SCSI Disk" and some other secondary. I did not reboot right away.
4. Go to console, go into C:\WINDOWS\SYSTEM32\DRIVERS, and rename AACMGT.SYS to something else.
5. Reboot the system and hope it still boots. Go into Device Manager -> Disks and make sure that AACMGT.SYS is no longer listed.
6. Run the 2003 to 2008 Upgrade process again. The Compatibility checker should no longer flag "Adaptec Storage Manager" as a blocker.

Windows 2008 Server R2 - Registry Accessing problem

Hi,
My projects are currently being migrated to Windows 2008 servers from Windows 2000. I am using registry nodes under
HKEY_LOCAL_MACHINE\Software\Wow6432Node\RegistryData\Test. My problem is when I am retrieving a string with 20 character or 39 character - it omits the final character. This is because normally when a string stores an additional space/null also be included.,
and in code we used to cut it using (like Left(xValue, xLength - 1)). I know instead of LEFT I can use TRIM and avoid the error. But I would like to know why it is happened only when string comes with 20 character.
Thanks in Advance.
Shine

RegGetValueA/W does not open or create a registry section.
RegCreateKeyEx does this. Maybe you're using a wrong export definition of the WIN32 API functions or some helper function(s) specific to VB.
-- pa

Oracle 11 under Windows 2008 installation problems

I cannot make Oracle 11.2.0.1.0 work under Windows 2008. The server's host name is SARABI. Anything of the following takes place on SARABI, no remote access is involved.
The procedure has been as follows...
- Windows 2008 was installed
- Oracle 11.2.0.1.0 was installed
- listener.ora, sqlnet.ora, tnsnames.ora were modified
- no other Oracle configuration file was touched
At this point it worked. I could connect with SQL Plus and with SQL Developer.
Next the server was rebooted. Without having changed anything at all, connecting was impossible. The message is "12514, TNS, listener does not currently know of service requested in connect descriptor". The three configuration files are given below.
Currently, all services are running accoording to Windows Control Panel. There are no entries in the eventlog. Executing "TNSPING SARABI" works fine. Executing "LSNRCTL status" shows "The listener does not support any services" (translated from German "Der Listener unterstützt keine Services"), the full output is given below.
--- LISTENER.ORA ---
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin
--- SQLNET.ORA ---
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.AUTHENTICATION_SERVICES= (NTS)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ORA ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
--- LSNRCTL status ---
C:\Users\admin>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 25-SEP-2010 11:49:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Anmeldung bei (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS des LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Startdatum 25-SEP-2010 11:24:54
Uptime 0 Tage 0 Std. 24 Min. 32 Sek.
Trace-Ebene off
Sicherheit ON: Local OS Authentication
SNMP OFF
Parameterdatei des Listener C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\network\admin\listener.ora
Log-Datei des Listener c:\programme\oracle\admin\diag\tnslsnr\SARABI\listener\alert\log.xml
Zusammenfassung Listening-Endpunkte...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SARABI.lionsland.local.de)(PORT=1521)))
Der Listener unterstützt keine Services
Der Befehl wurde erfolgreich ausgeführt.
Michael G. Schneider

Deleting the three configuration files and recreating them with "Net Manager" gives...
--- LISTENER.ora ---
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
ADR_BASE_LISTENER = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- SQLNET.ora ---
NAMES.DIRECTORY_PATH= (TNSNAMES)
ADR_BASE = C:\Programme\Oracle\Admin\product\11.2.0\dbhome_1\log
--- TNSNAMES.ora ---
SARABI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SARABI)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORCL)
After rebooting the server, the same problems appear. Executing "sqlplus SYS/**** AS SYSDBA" gives "database not started". Then executing startup gives...
ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_ORCL'
Michael G. Schneider

Windows 2008 r2 ethernet problem on UCS

Similar Messages

Maybe you are looking for