Windows 2008 r2 guests blue screen on Windows 2012 R2 Hyper-V Cluster with e5 2670-v2 processors

Hello all,
We have a new hyper-v infrastructure deployed in two brand new Dell R720 Servers with 384GB of Memory and dual Intel e5 2670-v2 processors. This infrastructure is replacing an existing hyper-v 2008 R2 and all the guests are being migrated to this new cluster.
The issue we are seeing is our 2008 r2 guests blue screening ocasionally with 0x0000001a,0x0000004e or 0x00000050 bugchecks.
All this guests are configured with dynamic memory and with the integration components up to date. These same guests were running with no problems in the hyper-v 2008r2 cluster.
When searching i found this article from vmware that pretty much describes what we are facing:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2073791
Are you aware of the same problem with this kindd of hardware on windows 2012 r2 hyper-v?
Thanks!
Nuno Carvalho

Meanwhile i found this May 2014 update on the intel specification of the CPU we are using:
CA135 Incorrect Page Translation when EPT is enabled
Problem:
If EPT (Extended Page Tables) is enabled, then a complex sequence of internal processor events may result in unexpected page faults or use of incorrect page translations.
Implication:
Due to this erratum a guest may crash or experience unpredictable system behavior.
Workaround:
It is possible for the BIOS to contain a workaround for this erratum.
Status:
For the affected steppings, see the
Summary Tables of Changes.
This affects VMware as of the today update of the article i referenced in the first post, what about hyper-v?
http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/xeon-e5-v2-spec-update.pdf
Nuno Carvalho

Similar Messages

  • Oracle RAC 11g on Windows 2008 64 bit - blue screen error on both nodes

    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull and crs_state -t shows all services in two nodes are online.
    When executed a select query with 100 sessions( For performance evaluation using Transaction generator ) ,the machine got crashed and blue screen is appeared on two nodes. I restrated the machines and and starts the same evaluation ,bt the same bug is repeating.
    Can anyone suggest a solution to solve this issue? Is our hardware is not sufficient ? Shall we need to perform any
    specific settings in Oracle RAC setup for performance evaluations?
    Is our settings for load balancing is not enough? ( We added "Load Balancing= On" on tnsnames.ora on client for load
    balancing)
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC 11g , Clusterware 11g R2 , ASM with 5 raw disk ( 1- votting disk ,1- ocr files and 3 disk files)
    Edited by: user2033016 on Jun 29, 2011 10:02 PM

    user2033016 wrote:
    Hi Everyone,
    I installed Oracle RAC 11g on Windows 2008 64 bit, The installation was successfull crs_state -t executed successfully.
    Bt the machine got crashed ,when executed a select query with 100 sessions( For performance evaluation using TG). A blue screen is appeared on two nodes. So i am not able to evaluate the performance.
    Can you please tell any suggesstions to solve this issue? Is our hardware is not sufficient? Or any software settings has to be done?. I tried most of hte technique ,bt the problem still exists.
    The following machine configuration is used for Oracle RAC setup
    Intel Core 2 Duo 2.66 GHz,
    Ram :4GB.
    OS : windows 2008 Server 64 Bit
    Oracle RAC , Clusterware 11g R2 64 Bit.i guess you have installed/configured RAC using VMware. i guess, the problem is with your RAM size. how much disk space and RAM size you have allocated for each machine?
    which documentation you have followed?

  • Windows 2008 R2 Sp1 Blue Screen Error and solution

    Hi Guys its been like the 5th time i keep on getting this error on my exchange server which is hosted under Windows 2008 R2 Sp 1 this is the error below please help
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.274.10
      Locale ID:    1033
    Additional information about the problem:
      BCCode:    4a
      BCP1:    000000007719133A
      BCP2:    0000000000000002
      BCP3:    0000000000000000
      BCP4:    FFFFF880094B2CA0
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    274_3
    Files that help describe the problem:
      C:\Windows\Minidump\061714-141960-01.dmp
      C:\Users\Asger\AppData\Local\Temp\WER-292189-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt
    Regards
    Asger
    Regards, Asger

    Hi Asger,
    Would you please let me confirm whether this BSOD issue occurred suddenly? If you can reproduce the problem, please perform a
    clean boot and check if this issue still persists.
    For this BSOD issue, we may need to analyze the crash dump file to narrow down the root cause of it. Please refer to following article and check if can help you to analyze
    the dump file.
    How to read the small memory dump file that is created by Windows if a crash occurs
    How to Debug Kernel Mode Blue Screen Crashes
    (for beginners)
    You got a B.S.O.D. (Blue Screen
    of Death, known as Bug Checks), now what?
    By the way, it is not effective for us to debug the crash dump file here in the forum. If this issues is a state of emergency for you. Please contact Microsoft Customer Service
    and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
    To obtain the phone numbers for specific technology request, please refer to the web site listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
    Hope this helps.
    Best regards,
    Justin Gu

  • High Network Utilization on HeartBeat and LiveMigration networks - Windows 2012 R2 Hyper-V cluster

    Hi all,
    I have just setup a fresh Windows 2012 R2 Hyper-V cluster with 4 nodes.
    Config:
    Network:
    2 x Networks for iSCSI
    1 x VM network 1
    1 x VM network 2
    1 x Heartbeat
    1 x LiveMigration
    Disks:
    5 GB = Quorum
    2 x 2.99 TB (Deduplication enabled)
    The problem I am getting is that HeartBeat and LiveMigration (both configured with Cluster Only traffic) have alot of traffic on them even though no LiveMigration (the only card configured for LiveMigration) is going on.
    All network configuration is the same as it was in Windows 2008 R2 SP1 cluster which these machines where running before (not upgrade, fresh install and migration) and did not have this "problem".
    Has anyone experienced this or have a solution to this?
    Regards,
    Thorir
    thorir

    Hi Thorir,
    According to your discription , you can try to monitor and analyse the traffic of LM via network monitor for troubleshooting .
    Here is the links for downloading and using network monitor  :
    http://www.microsoft.com/en-us/download/details.aspx?id=4865
    http://technet.microsoft.com/en-us/library/cc723623.aspx
     Any further information please feel free to let us know.
    Hope this helps
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Blue screen error "windows has recovered from a unexpected shutdown"

    Hi guys
    I am using laptop & everyday it will unexpectedly shutdown and shows Blue screen error "windows has recovered from a unexpected shutdown"...Pls help me to resolve this issue.
    Problem signature:
      Problem Event Name: BlueScreen
      OS Version: 6.1.7600.2.0.0.256.48
      Locale ID: 1033
    Additional information about the problem:
      BCCode: d1
      BCP1: 00000030
      BCP2: 00000002
      BCP3: 00000000
      BCP4: 8F2DA8A5
      OS Version: 6_1_7600
      Service Pack: 0_0
      Product: 256_1
    Files that help describe the problem:
      C:\Windows\Minidump\062614-23836-01.dmp
      C:\Users\Venkateshwara swamy\AppData\Local\Temp\WER-74552-0.sysdata.xml
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    It could be some driver compatibility issues.
    http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
     http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • MacBook Pro won't boot (question mark folder) after blue screen on windows bootcamp

    Hi,
    So, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
    But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
    Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it.
    Now I can't access any partitions on it, if I press option key on startup I get a blank window!
    I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
    How can I fix this? I can't loose my files and I need to work with it :/

    I just fixed it!
    For future reference, what I did was:
    - Booting from OSX DVD, go to disk utility
    - Erase windows partition (yap, I lost it...)
    - Do a "repair disk" on every partition of my hard drive
    - Restart
    And it just worked ;)
    Thankfully I had no important files on my windows partition, now I will just reinstall it.

  • Blue screen in windows 7

    I have been getting the blue screen after windows has been running for a while. Sometimes it happens when I am trying to install something. I have uploaded minidump files to the sky drive but I can't seem to read them, I tried copying and pasting them to
    the desktop and opening them as notepad files but all I get is gibberish, at least it is to me. I need to know how to make these accessible to the pros so I can repair this problem. I have the Technical information from the blue screen here:
    A clock interrupt was not received on  a secondary processor within the allocated time interval.
    *** stop 0x000000101 (0x0000000000000031, 0x0000000000000000, 0xFFFFF88002FD3180, 0x0000000000000003)
    Don't know if this helps but there it is.
    I am running Windows 7 P 64 bit desk top
    Gigabyte MB GA-MA78Gm-S2H Rev 1.0
    4GB Crucial Ballistix PC6400 800 Mhz 2Volt BL2CP25664A80A
    AMD PHENOM 9750 2.4Ghz QUAD CORE
    CPU temp was 32-34 degrees C last time I checked.
    Disk error check was inconclusive ( I walked away and when I returned windows had loaded ) I assume this means that no errors were found.
    RAM scanned and no errors were found.
    https://skydrive.live.com/?mkt=en-US#cid=74B3C1D7DE3540EC&id=74B3C1D7DE3540EC!130

    Alan
    These worked but were inconclusive 0oease run driver verifier to pin down the misbehaving driver.
    These crashes were related to memory management (probably caused by a driver). 
    Please run these tests to verify your memory and find which driver is causing the problem.  Since this appears to be a driver I would start with driver verifier.
    If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
    know what it is you probably are not overclocking.
    1-Memtest. (You can read more about running memtest here)
    2-Driver verifier (for complete directions see our wiki here)
    Co-Authored by  JMH3143
    Wanikiya and Dyami--Team Zigzag

  • Skype causing Blue Screen on Windows 7

    I just recently acquired a new computer and after installing Skype the second I log in it causes a blue screen of my computer. I tried a few times and the same happened everytime. Anyone else sharing this problem?

    Blue screen on Windows 7? Wow. I've never managed to get BSOD on any of my Win7 PCs.
    But what may cause this - no idea, really.
    Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
    Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
    Подписки | Цены

  • Display not working, external display does, but blue screen when windows loads

    Hi folks, wondering if anyone can help.
    My DV6's display is no longer working.  An external VGA display works, but when it gets to the "welcome" screen as it loads into windows, I get a blue screen.  I was able to load into safe mode previously, but I foolishly reformatted and reinstalled windows thinking it might solve the problem.  Now I can't even get into safe mode because it won't allow a first time setup of Windows in safe mode.
    I suspect this may be the death of my loyal notebook, but was hoping someone could propose a solution.
    Thanks!

    HI @Mikep037,
    Thank you for your query, I am happy to assist you!
    I understand that you are having an issue with your display.
    You have reformatted and reinstalled Windows but are unable to complete the setup.
    Did you do a recovery or did you reinstall Windows from a retail disk?
    First I would try a hard reset.  HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues.  Please be sure to remove any CD/DVD from tray and disconnect all externals devices or USB's.
    HP Notebook PCs - Overview of How to Troubleshoot Problems When a Computer Does Not Start Up or Boot...
    Here links to aid with the recovery process.
    HP PCs - Performing an HP system recovery (Windows 7)
    HP Notebook PCs - System Recovery May Fail or Display Error Message (Windows 7, or Vista)
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

    I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

    hii
    make sure you download and update correct driver version of graphic
    and know spec
    more:
    http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
    try to instal  "AMD High-Definition Graphics Driver" only
    and uninstal "Intel High-Definition (HD) Graphics Driver"
    Wisnu Suryandi

  • Thinkpad X300 with windows xp sp2 gets blue screen after standby.

    We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
    Thanks,

    I have found the solution to this problem - hope you are still watching the thread.
    Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
    After making those changes it worked like a charm.

  • Command Prompt Blue Screen in Windows 10

    McAfee 8.8i isn't supported yet until patch 6 which is due mid-end of this month eitherNod32 V5 seems to work ok though - although I don't know the official stance on that.http://www.bitdefender.co.uk/support/is-bitdefender-2015-compatible-with-windows-10-1451.htmlAlso worth reading if you're not already awarehttp://community.spiceworks.com/topic/1099226-antivirus-maker-bitdefender-hacked-customer-data-sold-...

    Hello All,
    I recently upgraded to Windows 10 and notice that when opening up command prompt, typing in command, then closing by clicking on the X button to close the Window, it will immediately blue screen. When I open command prompt, do a command, then type "exit" in command line, it closes the window with no problem. I haven't see any Microsoft forum reporting any issues so wasn't sure if this is a mass issue that will be rolling in soon or just isolated to my computer.
    Any advice would be helpful.
    This topic first appeared in the Spiceworks Community

  • BootCamp partition royally screwed up - blue screen in Windows, appears empty in OSX

    Howdy there,
    Well for over a year now I've been happily using BootCamp on my 2010 13in MacBook, first with XP and then 7 64bit. Then yesterday all of a sudden when I went to boot up in Windows, I got the blue screen of death and then a message telling me Windows files are missing. Rather than go through all Windows ******** restore hoops to get it working again, I figured I'd copy the important files to my Mac partition for safe keeping and wipe out BootCamp and start again, since I wanted to change the partition size anyways. However once booted in Mac, I found the BootCamp partition showed up empty, and I can't do anything with it in Disk Utility. When I click "restore files" in Windows, the C drive (BootCamp) doesn't even show up so I can't do anything to it in Windows.
    What on earth happened to it? I would really like to get my files back. I was using SL-NTFS to enable read/write on it. Could that have done something? I tried deleting it, but the BootCamp partition is still the same. Any insight would be greatly appreciated.

    One backup drive is not enough, minimal, maybe. One for Windows, a clone backup Mac, and TimeMachine.
    Consider a new backup drive with Lion installed, Lion Recovery and System partition, then 'shrink' the Lion partition to make room for backup volume.
    Lion Disk Utility can help edit, manage, inspect the health of all the hidden and user partitions.
    Check partition table health in Lion's Disk Utility
    Microsoft Security Essentials and IE9 offer good solid protection, no need but you may want to look into Kaspersky. But even KIS users seem to somehow manage to sometimes get their system infected. And there are tools to help. You will likely never know, unless you create a boot CD with malware removal tool and undo changes and repair the structure.
    Windows Easy Transfer can backup user files to NTFS partition. But that is an image, not individual files, so you need to restore using it again, similar to Migration Assistant.
    OS X Lion: About Windows Migration Assistant

  • Windows 2008 Group Policy not working in Windows 8.1

    Hi ,
    We found that the GPO settings created in Windows 2008 is not working in a Windows 8.1 machine.
    One example is the proxy settings.
    We confirmed from gpresult that the GPO is in the list but checking the actual proxy settings, it is not applied.
    Regards,
    Jhun

    Hi,
    How did we configure the proxy settings, using Internet Explorer Maintenance? If it is this case, just as Martin suggested, we can’t use IEM to manage
    IE 10 and IE 11.  However, we can configure the proxy setting via Group Policy Preferences (GPP).
    Regarding this point, the following blog can be referred to for more information.
    Configuring Internet Explorer 10′s
    Proxy Via Group Policy
    http://johnfail.wordpress.com/2013/06/15/configuring-internet-explorer-10s-proxy-via-group-policy/
    In addition, when we use this GPP extension, pay attention to GPP F5-F8 keys.
    Regarding this point, the following blog can be referred to for more information.
    Group Policy Preferences F5 F6 F7 F8 “documentation”
    http://msitpros.com/?p=1014
    Please Note: Since the above two websites are not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy
    of this information.
    In addition, regarding the deprecation of IEM, the following article can be referred to for more information.
    Appendix B: Replacements for Internet Explorer Maintenance
    http://technet.microsoft.com/en-us/library/jj890998.aspx
    Best regards,
    Frank Shen

  • Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

    I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
    The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
    I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
    Tim

    Sorry Tim, is that all 50 blue screen if live migrated?
    Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
    The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
    Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
    CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Maybe you are looking for