Windows 2008 R2 NFS setup issues...

Hi all,
Server is a domain controller and is the only server in it's domain.
Windows 2008 Enterprise R2 fully updated and is a new install.
I can only install NFS client not NFS server (only from CLI using Ocsetup, from Server Manager / Roles NFS does not install at all).
Errors logged are:
The Windows component "ServicesForNFS-ServerAndClient;ServerForNFS-Infrastructure;NFS-Administration;ClientForNFS-Infrastructure" could not be configured.
The component installer returned an error: 3017 "The requested operation failed. A system reboot is required to roll back changes made." (Command line: "Ocsetup
ServicesForNFS-ServerAndClient;ServerForNFS-Infrastructure;NFS-Administration;ClientForNFS-Infrastructure")
AND:
Update CoreFileServer of package FileServer-All failed to be turned on. Status: 0x80070bc9.
Update ClientForNFS-Infrastructure of package NFS-Full failed to be turned on. Status: 0x80070bc9.
Update NFS-Administration of package NFS-Full failed to be turned on. Status: 0x80070bc9.
Update ServerForNFS-Infrastructure of package NFS-Full failed to be turned on. Status: 0x80070bc9.
The component setup program encountered an error: 0x643. Fatal error during installation
... anyone had the same experience... really need NFS server installed to use User Name Mapping service!
Thanks.

Hi Lex,
I will try to follow your setup steps and see if I can hit the same issue. Here is what I am going to try
1) New Install of Windows 2008 Enterprise Edition R2
2) Turn on automatic updating and install all updates
3) Install AD Services and promote server to DC (new domain in new forest, functional level Windows 2003)
4) Do you have DNS or any other selection besides this ?
After this I will run
Ocsetup
ServicesForNFS-ServerAndClient;ServerForNFS-Infrastructure;NFS-Administration;ClientForNFS-Infrastructure
I see that you mentioned "really need NFS server installed to use User Name Mapping service!" Are you planning to run User Name Mapping Service on this machine ? User
name mapping service is no longer shipped from Windows 2008 Server onwards.
Thanks,
Frank

Similar Messages

Windows 2008 R2 Failover Clustering Issue - The operation returned because the timeout period expired.

I am trying to get a new Windows 2008 R2 cluster to work on two VMware servers (VMware ESXi 5.0.3) and am experiencing some form of timeout issue during the creation of the cluster according to the logs.
All validation checks pass successfully, whether trying to create a single node or dual node cluster, but the same error message is seen when creating the cluster. I have tried various suggestions found but none of them have made a difference. In an effort
to further diagnose the issue I enabled the following diagnostic logs:
- FailoverClustering
- FailoverClustering-Manager
- FailoverClustering-Client
The only useful error I can find is in the FailoverClustering-Client log which reports an error 'Couldn't resolve tcp binding to cluster' for each physical node to be part of the cluster.
In order to further diagnose the cause of the issue, I am looking for any options for increasing logging when attempting to create the cluster. Is there a way to increase the logging to see what the actual timeout is occurring with?
Alex.

Sorry, I should have been more clear ...The servers I am attempting to create a cluster with are Virtual Servers running on a VMware ESXi (5.0.3). They have access to two shared disks (connected to each VM using a separate SCSI Controller from that for the
disk used to install the OS) with Virtual SCSI Bus Sharing set within VMware.
Each Virtual Server has two NICs configured (with static IPs) - one for internal (domain connectivity) and the other for heartbeat connectivity. The servers can ping each other via both interfaces, as expected, but only domain connectivity works via the
internal NIC.
I have tried creating a single node or dual node cluster and get the same error each time. When the cluster is attempting to be created I can see the new computer object is created in Active Directory (which is then deleted when the cluster creation fails)
and I have also tried pre-creating the computer object and specifically setting permissions on it.
When creating the cluster I have tried via the GUI and via PowerShell (both with and without the option to attach the shared storage) but always get the same type of timeout error message. I am hoping there are further debugging options that can be used
to provide a better output as to what the timeout is occurring with.

Windows 2008 R2 RDS Licensing Issue

I have Citrix Presentation Server 4.5 farm (with all of the application servers running Windows 2003) and I have just migrated from using a Windows 2003 server for the terminal services licensing to a Windows 2008 R2 RDS server for the licensing. We have
a number of thin-clients that connect to the Citrix farm and provide a kiosk for users. We have 85 per device licenses however we are only using 15 of those licenses (plans were made but never implemented to use the rest), so we have 70 available licenses.
The licenses are configured per device and as Windows Server 2003 licenses.
After the migration to 2008 R2, the thin-clients connected to the new licensing server without any trouble at all. As I monitored the licenses on the new server, each thin-client was given a temporary license first and then at the
next connection they got a permanent license. All of this I have been able to confirm through the event logs on the server.
However, what I get in the event logs of the new 2008 R2 licensing server an event with event ID 21 that says:
The Remote Desktop license server "ServerName" does not have any remaining permanent Remote Desktop Services client access licenses (RDS CALs) of the type "Windows Server 2003 - TS Per Device CAL". As a result, the Remote Desktop license server cannot issue
RDS CALs of the type "Windows Server 2003 - TS Per Device CAL" to the Remote Desktop Session Host server "vvv.xxx.yyy.zzz". To resolve this problem, verify that the Remote Desktop licensing mode configured on the RD Session Host server matches the type of
RDS CALs installed on the Remote Desktop license server. If required, purchase and install additional RDS CALs as needed for this Remote Desktop license server.
(Note I have removed the server name and IP address due to company policy.) I have confirmed that every server in my Citrix farm has its terminal services configuration set for "per device" licensing and I have also specified the name of the 2008
R2 server rather than allow the servers to automatically find the licensing server. I have confirmed that my 2008 R2 server is configured for "per device" licensing.
The IP addresses I have seen in the event log messages are the IP addresses of a Citrix server rather than one of the thin-clients, and so far every Citrix server we have has appeared in one of these event log messages. I have been able
to determine that this event does not occur when a thin-client is connecting up nor does this event occur when I remotely log into the server.
As I noted above we only have 15 thin-clients using the 85 licenses so we have 70 available licenses for the Citrix servers so why are we out of licenses? What is this message trying to tell me?
Thanks
Brent

Hi Bent,
According the Event ID 21, I think you might have the license connection issues with RDS CALs. I suggest you analyze some relative services and
make sure your network without any misconfiguration.
Hopefully, there is an article describes how to troubleshoot this license issue on the terminal server.
Event ID 21 — Terminal Services Client Access License (TS CAL)
http://technet.microsoft.com/en-US/library/A98D84AC-B824-4F00-BF58-3CFF23493BF9.aspx
By the way, the license of Windows Server 2003 does not support to assign CAL to allow user to access the Windows Server 2008. You should buy a
new Windows Server 2008 license to meet the requirement above if necessary.
Hope this helps.

Windows 2008 R2 RRAS VPN Issue

Hello,
I have a Windows 2008 R2 server configured with RRAS. I have several persistent connections set up to do remote data backups. After a while, the connections get disconnected and if I try to reconnect, I get an error message
that states:
An error occurred during connection of the interface. A connection to the remote computer could not be established. You might need to change the network settings for this connection.
If I restart the RRAS service, then I can reconnect them all. And they work fine until they get disconnected again. The server is a standalone server, not part of a domain or anything.
I previously had these connections set up on a 2003 server, and they worked pretty flawlessly. It's only since I changed to this new server that these issues started. Anyone know what the issue could be?
Thanks.

Is that Event ID 20167?
Is there a DHCP Relay Agent configured?
I assume the DHCP server has enough free IPs to hand out to RRAS when needed. RRAS grabs a block of 10 IPs from DHCP at a time to use for connections.
How long is the lease?
References:
Event ID 20167 — RRAS IPCP Negotiation - Resolution
http://technet.microsoft.com/en-us/library/dd315994(v=ws.10).aspx
Not enough IPs in DHCP Scope:
http://www.eventid.net/display.asp?eventid=20167&eventno=5288&source=RemoteAccess&phase=1
Routing and Remote Access VPN DHCP error - DHCP lease too short
http://social.technet.microsoft.com/Forums/windowsserver/en-US/58e62df7-ce40-4814-b522-6785e230c869/routing-and-remote-access-vpn-dhcp-error?forum=winserver8gen
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Windows 2008 R2 Screen Lock Issue (GPO)

Scenario: We will be deploying POS machines at our stores that will have Windows 2008 R2 as the preferred OS. The function of this POS machine is for POS administration and not for ringing up sales. The machines have been configured to autologin a specific
user via GPO for POS functions. Also, a specific POS desktop environment shell has been configured to launch instead of Explorer (explorer.exe) shell environment at autologon.
Everything seems to be working as expected except for the session of the user locking. Since the POS environment needs to be up at all times with the specific user profile, we do not want the OS to lock the user session. I've timed it and it seems to lock
the screen (not log off) at approximately 15 minutes of inactivity, we do not want this.
So far, these are the GPOs I have configured that have not fixed the issue:
Computer Configuration>Policies>Windows Settings>Security Settings>Local Policies>Security Options>Microsoft Network Server: Amount of idle time required before suspending session = 99999 minutes
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Allow applications to prevent automatic sleep (plugged in) = Enabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Require a password when a computer wakes (plugged in) = Disabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Turn off hybrid sleep (plugged in) = Enabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Sleep Settings>Turn on the ability for applications to prevent sleep transitions (plugged in) = Enabled
Computer Configuration>Policies>Administrative Templates>System>Power Management>Video and Display Settings>Turn off the display (plugged in) = Enabled = 99999 seconds
User Configuration>Policies>Administrative Templates>Control Panel>Personalization>Enable screen saver = Disabled
User Configuration>Policies>Administrative Templates>Control Panel>Personalization>Password protect the screen saver = Disabled
User Configuration>Policies>Administrative Templates>System>Ctrl+Alt+Del Options>Remove Lock Computer = Enabled
User Configuration>Preferences>Windows Settings>Registry>HKCU>Control Panel>Desktop>ScreenSaveActive = 0
What are we doing wrong? How do I configure the OS to not lock the user session but keep it active at all times?
As a side note: We have Windows 7 POS machines also that will be ringing up sales that we do not have the screen lock issue.

Hi,
>>Please see my setting indicated in my original post. We have Turn Off the Display set to 99999 seconds.
I understand that we have set the Turn Off the Display for this amount of time. However, just for double check, we can go to the power plan we are using to check if the setting has been applied successfully. If the setting has been applied successfully,
it should be grayed out. Or, we can run command gpresult/h gpreport.html
with admin privileges to collect group policy result report to check this.
Besides, do we use other third party software to protect our computer? We can try to clean boot the server to see if the situation persists.
Regarding how to perform a clean boot, the following article can be referred to for more information.
How to perform a clean boot in Windows
http://support.microsoft.com/KB/929135
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

Windows 2008 and Tiger SMB Issues

I've been pulling hair out all morning over this one.
We have a new Windows 2008 server for file sharing. We are trying to connect to it via SMB on our network (with AD domain). Works great on PC, works on Leopard, does not work on Tiger.
From connect I type “smb://xxxxxxxx” after a few minutes I get an error: “could not connect to the server because the name or password is not correct” which is odd because I haven’t entered any login credentials to begin with.
I’ve been pouring over Google, Microsoft KB and anything else I can come across with no luck. Things I’ve tried.
-Clearing keychain passwords for the server
-Setting the digital signing on the server to disable (most cited fix, but no go for me)
-Setting Sharing and Security model to “Classic – local users authenticate themselves”
-Setting LAN Manager authentication to “Send LM & NTLM – use NTLMv2 session security if negotiated”
-Editing the smb.conf file on the mac to no security
-Created the nsmb.conf file on the mac with minauth=none.
-Used Directory access on the mac to add the mac and bind it to the domain.
-Many Many restarts of the server and clients (and running gpupdate.exe on the server)
One thing that DOES work is a trial of ADmitmac… but this is not realistic for us if we have guest users needing to access the share.
I’ve been able to use smb before with tiger and windows xp and windows 2003… but the mac is throwing a fit over the new windows 2008. Also, we can’t upgrade all of our machines to Leopard (which does work) because it will break Quark 6.5.

Any relevant looking log messages if you browse in Console?
- cfr

Windows 2008 R2 RADUIS setup

I have the Windows 2008 R2 server as a domain controller, and it works fine in that capacity. I am trying to set up RADIUS authentication for my ASA, and when I am trying to create a new policy, I want to add Windows User groups, but the selection does not
appear, nor does Windows Groups or Machine Groups. I think this is the missing piece, but I fail to see why these are unavailable for selection. Anyone have any ideas?

Hi,
You mean that the whole “Groups” in conditions selection
disappears? Have you created the policy in wrong place?
The “Groups” doesn’t appears in Connection Request Policies. It appears in
Network Policies.
The following article is about how to create a network policy,
Add a Network Policy
http://technet.microsoft.com/en-us/library/cc755309(v=ws.10).aspx
Hope this helps.
Steven Lee
TechNet Community Support

OSX 10.8.5 won't connect to Windows 2008 R2 NFS

Hi
We have about 25 Mac clients in our Microsoft Windows environment. OSX is bound to our single Active Directory domain and all our Windows server are 2008 R2.
For several years we have been using SMB filesharing and connecting the Mac clients to our Windows file server. Now we are experiencing performance problems and are evaluating NFS file sharing on our file servers. The Mac client won't connect to our Windows NFS server and we have pinpointed the problem to OSX requesting Kerberos token encryption type "des3-hmac-sha1" which is unsupported by Windows.
How can we configure NFS / Kerberos on OSX 10.8.5 to use a different Kerberos encryption type ?
I have tried to update the /etc/krb5.conf file without success. OSX is still asking for the same encryption type.
The file /Library/Preferences/edu.mit.Kerberos does not exist. The my understanding OSX 10.8.5 uses the Heimdal Kerberos implementation.
/etc/krb5.conf
[libdefaults]
ticket_lifetime = 1560m
default_realm = VARNER.NO
ccache_type = 4
# default_tgs_enctypes = aes256-cts-hmac-sha1-96 aes128-cts-hmac-sha1-96 des-cbc-md5
# default_tkt_enctypes = aes256-cts-hmac-sha1-96 aes128-cts-hmac-sha1-96 des-cbc-md5
# permitted_enctypes = aes256-cts-hmac-sha1-96 aes128-cts-hmac-sha1-96 des-cbc-md5
default_tgs_enctypes = des-cbc-md5
default_tkt_enctypes = des-cbc-md5
permitted_enctypes = des-cbc-md5
default_lifetime = 7d
renew_lifetime = 7d
autologin = true
forward = true
forwardable = true
renewable = true
encrypt = true
dns_lookup_kdc = true
dns_lookup_realm = true
[realms]
EXAMPLE.NO = {
kdc = example-dc1.example.no:88
kdc = example-dc2.example.no:88
[domain_realm]
.example.no = EXAMPLE.NO
example.no = EXAMPLE.NO
[logging]
kdc = FILE:/var/log/krb5kdc.log
admin_server = FILE:/var/log/krb5kadmin.log

So Does Maverick Fix this issue?
Im trying to sort out my inlaws wireless printing issues. They have a mac running 10.6.8 works fine wirelessly and USB. They have another mac running 10.8.5 and this mac will not see the printer directly. I can print via mac 1 using a shared connection. But if you deselect mac 1 sharing options then mac 2 cannot see the printer. I can print via usb and via the shared connection using mac 1. But not directly.... So if Bonjour is no good on 10.8.5 does the update to mavericks fix it?
Thanks

11gR2 Windows 2008 R2 node eviction issue

Hi
We are facing the cluster node eviction when the teamed network is down less than 5 seconds time. Is there any settings needs to be changed? Recently our network team is performing a firmware upgrade of all modules, they mentioned to us our HP blade servers and network is completely redundant. But still the node eviction happen to us, we tried with different scenarios by disabling the separate network cards. When ever we do disable and enable private teamed network even less than 2 seconds the node eviction is happening.
After reading this CSS Timeout Computation in Oracle Clusterware [ID 294430.1] at least it should wait till 30 seconds time but it is not.
I am attaching the log here this is node2 alert log..
[ctssd(5264)]CRS-2409:The clock on host shadbtestrac02 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
2010-08-10 10:34:34.722
[ctssd(5264)]CRS-2409:The clock on host shadbtestrac02 is not synchronous with the mean cluster time. No action has been taken as the Cluster Time Synchronization Service is running in observer mode.
2010-08-10 10:35:15.485
[cssd(5124)]CRS-1612:Network communication with node shadbtestrac01 (1) missing for 50% of timeout interval. Removal of this node from cluster in 14.743 seconds
2010-08-10 10:35:23.331
[cssd(5124)]CRS-1611:Network communication with node shadbtestrac01 (1) missing for 75% of timeout interval. Removal of this node from cluster in 6.896 seconds
2010-08-10 10:35:27.387
[cssd(5124)]CRS-1610:Network communication with node shadbtestrac01 (1) missing for 90% of timeout interval. Removal of this node from cluster in 2.840 seconds
2010-08-10 10:35:30.242
[cssd(5132)]CRS-1609:This node is unable to communicate with other nodes in the cluster and is going down to preserve cluster integrity; details at (:CSSNM00008:) in C:\OracleGI\11.2.0\log\shadbtestrac02\cssd\ocssd.log.
2010-08-10 10:35:39.665
[cssd(4724)]CRS-1608:This node was evicted by node 1, shadbtestrac01; details at (:CSSNM00005:) in C:\OracleGI\11.2.0\log\shadbtestrac02\cssd\ocssd.log.
2010-08-10 10:35:39.665
[cssd(4548)]CRS-1608:This node was evicted by node 1, shadbtestrac01; details at (:CSSNM00005:) in C:\OracleGI\11.2.0\log\shadbtestrac02\cssd\ocssd.log.
2010-08-10 10:35:39.680
[cssd(3808)]CRS-1608:This node was evicted by node 1, shadbtestrac01; details at (:CSSNM00005:) in C:\OracleGI\11.2.0\log\shadbtestrac02\cssd\ocssd.log.
2010-08-10 10:35:39.712
[ctssd(5268)]CRS-2402:The Cluster Time Synchronization Service aborted on host shadbtestrac02. Details at (:ctsselect_mmg5_1: in C:\OracleGI\11.2.0\log\shadbtestrac02\ctssd\octssd.log.
2010-08-10 10:35:39.712
[C:\OracleGI\11.2.0\bin\oraagent.exe(5984)]CRS-5822:Agent 'C:\OracleGI\11.2.0\bin\oraagent.exe_system' disconnected from server. Details at (:CRSAGF00117:) in C:\OracleGI\11.2.0\log\shadbtestrac02\agent\crsd\oraagent\oraagent.log.
2010-08-10 10:35:39.712
[C:\OracleGI\11.2.0\bin\orarootagent.exe(5768)]CRS-5822:Agent 'C:\OracleGI\11.2.0\bin\orarootagent.exe_system' disconnected from server. Details at (:CRSAGF00117:) in C:\OracleGI\11.2.0\log\shadbtestrac02\agent\crsd\orarootagent\orarootagent.log.
Node1 alert log..
2010-08-10 09:13:28.642
[C:\OracleGI\11.2.0\bin\oraagent.exe(5652)]CRS-5011:Check of resource "CPCSR" failed: details at "(:CLSN00007:)" in "C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log"
2010-08-10 09:13:29.828
[crsd(3104)]CRS-2765:Resource 'ora.cpcsr.db' has failed on server 'shadbtestrac01'.
2010-08-10 09:13:31.700
[crsd(3104)]CRS-2765:Resource 'ora.cpcsr.cpcsboa.dev.sha.svc' has failed on server 'shadbtestrac01'.
2010-08-10 09:13:31.700
[crsd(3104)]CRS-2771:Maximum restart attempts reached for resource 'ora.cpcsr.cpcsboa.dev.sha.svc'; will not restart.
2010-08-10 09:13:44.102
[crsd(3104)]CRS-2758:Resource 'ora.cpcsr.db' is in an unknown state.
2010-08-10 10:35:18.777
[cssd(4272)]CRS-1612:Network communication with node shadbtestrac02 (2) missing for 50% of timeout interval. Removal of this node from cluster in 14.697 seconds
2010-08-10 10:35:26.437
[cssd(4272)]CRS-1611:Network communication with node shadbtestrac02 (2) missing for 75% of timeout interval. Removal of this node from cluster in 7.037 seconds
2010-08-10 10:35:30.493
[cssd(4272)]CRS-1610:Network communication with node shadbtestrac02 (2) missing for 90% of timeout interval. Removal of this node from cluster in 2.981 seconds
2010-08-10 10:35:33.488
[cssd(4280)]CRS-1607:Node shadbtestrac02 is being evicted in cluster incarnation 173888169; details at (:CSSNM00007:) in C:\OracleGI\11.2.0\log\shadbtestrac01\cssd\ocssd.log.
2010-08-10 10:35:40.009
[ohasd(3320)]CRS-8011:reboot advisory message from host: shadbtestrac02, component: ag164619, with time stamp: L-2010-08-10-10:35:39.000
[ohasd(3320)]CRS-8013:reboot advisory message text: clsnomon_status: need to reboot, unexpected failure 8 received from CSS
2010-08-10 10:36:09.805
[cssd(12776)]CRS-1601:CSSD Reconfiguration complete. Active nodes are shadbtestrac01 .
2010-08-10 10:36:09.961
[crsd(3104)]CRS-5504:Node down event reported for node 'shadbtestrac02'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'Generic'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.AHPSR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.AHPSR_AHPSBC.TEST.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.APPOHDR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.APPOITR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.APPOITR_OREMS.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.CFSR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.CFSR_CFS.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.CFSTESTR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.CFSTESTR_CFSADS.TEST.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.CPCSR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.CPCSR_CPCSBOA.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.FASTR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.FASTR_FAST.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.FASTTRGR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.FASTTRGR_FAST.TRNG.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.FASTTSTR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.FASTTSTR_FAST.TEST.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.MAXIMOR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.MAXIMOR_MAXIMO.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.MAXIMOR_MAXIMO.TEST.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.SHAPMSR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.SHAPMSR_SHAPMS.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.TEPMSR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.TEPMSR_TEPMS.DEV.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.WHAT1R'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.WHAT1R_WHAT1ADS.TEST.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.WHAT2R'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.WHAT2R_WHAT2ADS.TEST.SHA'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.WWWDBR'.
2010-08-10 10:36:22.894
[crsd(3104)]CRS-2773:Server 'shadbtestrac02' has been removed from pool 'ora.WWWDBR_PLC.DEV.SHA'.
2010-08-10 10:37:48.802
[C:\OracleGI\11.2.0\bin\orarootagent.exe(5092)]CRS-5818:Aborted command 'check for resource: ora.shadbtestrac02.vip 1 1' for resource 'ora.shadbtestrac02.vip'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:37:49.722
[C:\OracleGI\11.2.0\bin\orarootagent.exe(4540)]CRS-5818:Aborted command 'check for resource: ora.net1.network shadbtestrac01 1' for resource 'ora.net1.network'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:37:49.722
[C:\OracleGI\11.2.0\bin\orarootagent.exe(9064)]CRS-5818:Aborted command 'check for resource: ora.shadbtestrac01.vip 1 1' for resource 'ora.shadbtestrac01.vip'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:37:49.738
[C:\OracleGI\11.2.0\bin\orarootagent.exe(9448)]CRS-5818:Aborted command 'check for resource: ora.scan2.vip 1 1' for resource 'ora.scan2.vip'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:37:50.284
[C:\OracleGI\11.2.0\bin\orarootagent.exe(10020)]CRS-5818:Aborted command 'check for resource: ora.scan1.vip 1 1' for resource 'ora.scan1.vip'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:38:06.788
[C:\OracleGI\11.2.0\bin\orarootagent.exe(5300)]CRS-5818:Aborted command 'check for resource: ora.scan3.vip 1 1' for resource 'ora.scan3.vip'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:41:03.721
[C:\OracleGI\11.2.0\bin\orarootagent.exe(5484)]CRS-5818:Aborted command 'check for resource: ora.net1.network shadbtestrac01 1' for resource 'ora.net1.network'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 10:41:57.323
[crsd(3104)]CRS-2765:Resource 'ora.net1.network' has failed on server 'shadbtestrac01'.
2010-08-10 14:57:31.510
[C:\OracleGI\11.2.0\bin\oraagent.exe(5656)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 14:57:32.648
[C:\OracleGI\11.2.0\bin\oraagent.exe(6416)]CRS-5014:Agent "C:\OracleGI\11.2.0\bin\oraagent.exe" timed out starting process "C:\OracleGI\11.2.0\bin\lsnrctl.exe" for action "check": details at "(:CLSN00009:)" in "C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log"
2010-08-10 14:59:16.732
[C:\OracleGI\11.2.0\bin\oraagent.exe(12912)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:00:57.289
[C:\OracleGI\11.2.0\bin\oraagent.exe(12676)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:00:57.289
[C:\OracleGI\11.2.0\bin\oraagent.exe(13848)]CRS-5818:Aborted command 'check for resource: ora.LISTENER_SCAN1.lsnr 1 1' for resource 'ora.LISTENER_SCAN1.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:02:55.802
[C:\OracleGI\11.2.0\bin\oraagent.exe(12580)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:04:11.899
[C:\OracleGI\11.2.0\bin\oraagent.exe(3588)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:05:23.207
[C:\OracleGI\11.2.0\bin\oraagent.exe(13996)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:06:34.748
[C:\OracleGI\11.2.0\bin\oraagent.exe(12388)]CRS-5818:Aborted command 'check for resource: ora.LISTENER.lsnr shadbtestrac01 1' for resource 'ora.LISTENER.lsnr'. Details at (:CRSAGF00113:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\oraagent\oraagent.log.
2010-08-10 15:06:37.291
[crsd(5112)]CRS-5831:Agent 'C:\OracleGI\11.2.0\bin\oraagent.exe' has exceeded maximum failures and has been disabled. Details at (:CRSAGF00129:) in C:\OracleGI\11.2.0\log\shadbtestrac01\crsd\crsd.log.
2010-08-10 15:08:35.243
[ohasd(3948)]CRS-2765:Resource 'ora.crsd' has failed on server 'shadbtestrac01'.
2010-08-10 15:08:36.569
[C:\OracleGI\11.2.0\bin\orarootagent.exe(5076)]CRS-5822:Agent 'C:\OracleGI\11.2.0\bin\orarootagent.exe_system' disconnected from server. Details at (:CRSAGF00117:) in C:\OracleGI\11.2.0\log\shadbtestrac01\agent\crsd\orarootagent\orarootagent.log.
2010-08-10 15:08:53.744
[crsd(4420)]CRS-1012:The OCR service started on node shadbtestrac01.
2010-08-10 15:09:06.630
[crsd(4420)]CRS-1201:CRSD started on node shadbtestrac01.
If anyone facing similar issue. Please share your inputs.
Thanks
Rao

Hi Rao,
have you disabled Media Sense?
http://support.microsoft.com/default.aspx?scid=kb;en-us;239924
Because if media sense is not disabled, Windows will report a unplugged/unlinked network card. This will immediately tell the cluster that network is down. In this case, Oracle does not wait. Since the network is down a reboot is initiated (need need to wait for a heartbeat down).
Sebastian

Window 2008 R2 DHCP setup for /21 subnets

I have a 2008 r2 domain server that I am setting up separate client DHCP scopes. One for regular wireless network and one for the guest network. I followed the same process to create both but they both created differently when viewed in the DHCP
mgmt interface. The .40 is working, the clients grab the next available IP and they are off. The .50 is not working correctly or the same way. See detail below.
I created a Scope for the wireless network clients 10.100.40.0 /21 Range 10.100.40.1-47.254 subnet mask 255.255.248.0 The
scope created as a super scope and added scopes .40 .41 .42 .43 .44 .45 .46 .47 (all as separate scopes under the super scope) for distribution which is accurate according to the subnet calculator. I excluded 40.1-10. It works! clients fill up
.40 and move to .41 etc. Statistics total scopes 8, total addresses 2023, in use 874, available 1149.
I created a scope for the guest wireless network clients 10.100.50.0 /21 same way! Range 10.100.48.1-55.254 (according to the subnet calculator)
subnet mask 255.255.248.0 The scope created as a regular scope 10.100.48.0 /21 starting address assigned is in the 48 subnet. I excluded 10.100.50.1-10. Statistics total scopes listed none ( no line), total addresses 2036, in use 262, available
1774.
I would prefer they both be set up the same way and functioning. As I said earlier .40 is working great! but .50 seems to have some .48 clients, 3 49 clients and a small group for 50 starting from the exclusion. I am not sure it is working
correctly ... I have had several people tell me that they are not able to grab an IP on the guest network. I have tried to recreate several time with out any different results.
Anyone have any ideas why .50 is different and what I could do to fix this? Thanks! chabo
chabt

Hi chabt,
Based on your description, I suppose that when you use
New Scope Wizard to create the super scope, you choose 24 in the
Length edit of Configuration settings that propagate to DHCP Client, that is to say, the subnet mask is 255.255.255.0. Then the New Scope Wizard will prompt you create a superscope because the address range you specified is
too large for a single scope. If the subnet mask is 255.255.248.0, it won’t prompt you create a superscope.
About the Statistics displaying, please try to restart DHCP server to see if it can display normally.
About the problem that several users couldn’t obtain an IP address, because other users can get IP addresses, please check if they match the policies on your guest network.
Also, please check the DHCP logs to see if the DHCP server logged any related logs. Such as, you could find if the lease was denied, or if the DHCP server received the DHCP request or other useful information.
The dhcp logs are stored in %windir%\System32\dhcp. Please ensure that the DHCP server enabled audit logging.
To enable DHCP audit logging, in the DHCP console, right click
IPv4, click Properties, in the General tab, check “Enable DHCP audit logging” checkbox.
For more details about DHCP audit logging, please refer to the article below,
More About DHCP Audit and Event Logging
http://technet.microsoft.com/en-us/library/dd759178.aspx
Best Regards,
Tinac

Windows 8.1 Enterprise DirectAccess with a Windows 2008 R2 DA server

I don't suppose anyone out there is using Windows 8.1 Enterprise with a Windows 2008 R2 DirectAccess setup?
We have an existing 2008 R2 DA setup used by 50+ Windows 7 Enterprise laptops without any issues.
We're testing Windows 8.1 Enterprise and the DirectAccess functionality seems to be very intermittent, you can't use any of the Windows 8.1 powershell commands to look at the status as it's not using the new 2012 functionality but DA is there and works.
The problem is it seems to take a long time to connect, anything from 15 minutes to several hours and in some instances seems to fail to connect entirely. I can't see anything in the event logs and I'm really struggling to work out why it's so intermittent.
Cheers
Robert Grigsby

Hi,
DirectAccess performance is dependent on many factors such as the speed of the DirectAccess client’s connection to the Internet, Internet latency and congestion between the
DirectAccess client and server, and the current load on the DirectAccess server. Another reason might be the type of Internet Protocol version 6 (IPv6) encapsulation being used over the Internet Protocol version 4 (IPv4) Internet. 6to4 and Teredo tend to have
higher performance because the encapsulation is simpler to process. Internet Protocol over Secure Hypertext Transfer Protocol (IP-HTTPS) tends to have lower performance because of the higher protocol overhead and the additional Secure Hypertext Transfer Protocol
(HTTPS)-based encryption and decryption.
When examining performance issues, one of the first places to look is the display of the
ipconfig command on the DirectAccess server, which indicates the type of encapsulation based on the interface that has a global IPv6 address assigned.
The related KB:
DirectAccess Client Connection is Slow
http://technet.microsoft.com/en-us/library/ee844161(v=ws.10).aspx
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 2008 Server Enterprise R2 x64 and Perc 4/dc SCSI driver issue

Hello all, this is the first time posting so please forgive me if this has been posted here before. I did try to search this issue but zero returns.
OK, I have a Dell PowerEdge 2900. I have just put a fresh install of MS Windows 2008 ENT. Server x64. I cannot seem to find a driver for the PERC 4/dc SCSI controller I have installed. I have been told the 2003 x64 driver would work so I attempted to install that driver but was unsuccessful. Then I was told by Dell that the driver should be native to the OS. Is the driver native to 2008 Server (or, supposed to be)? Does anyone have an answer as to where I might retrieve am driver of the controller if not? Anyway, thanks in advance

Hello,
I don't have a PowerEdge 2900, but I do have a PowerEdge 2850. I'm also just a regular bloke like yourself that just happened upon your post and after I figured this driver debacle out I registered to hopefully help.
The good thing is my PERC card is the same in the PE2850 as it is in your PE2900, as I'm utilizing a PERC 4/DC. I've also managed to run into the same issue you ran into(?) trying to load Windows 2008 Server Enterprise R2 (support for 32bit processors have been removed in R2... so no more x86 versions... my poor PE2650s never stood a chance with this OS).
I can tell you officially from my experience/research Windows Server Enterprise R2 does not have support built into it for the PERC 4/DC card.
However, I was able to download the Windows 2003 x64 driver from support.dell.com and make it work after much trial and error with newer releases of the PERC 4/DC driver that were not accepted by 2k8R2.
Here's the link: http://support.dell.com/support/downloads/download.aspx?c=us&cs=RC956904&l=en&s=hied&releaseid=R100373&SystemID=PWE_PNT_P3C_2850&servicetag=FBCLP61&os=WX64&osl=en&deviceid=6396&devlib=0&typecnt=0&vercnt=1&catid=-1&impid=-1&formatcnt=3&libid=35&fileid=129549
File name (incase Dell moves it on you guys) is "perc-w2k3-6.46.3.64-A01.exe", date released 6/9/2005, build version 6.46.3.64, and the Dell revision number is A01.
Even though it states the driver is for the LSI Logic PERC 4e/Si it's sort of a mega pack including many other drivers such as the PERC 4/DC. This was much relief because I was thinking I would need to stick with Windows 2008 until I found this driver for Windows 2008 R2. :)
What I did was:
1) Downloaded the driver and extracted it to a USB drive.
2) Booted-up via the Win2k8R2 CD and when it got to the screen where it asked to install to a partition and didn't show me a partition to install Win2k8R2 to I selected the option to load a driver.
3) From the load driver option I just browsed to the directory where I extracted the files and selected that directory. If the "hide devices that are not compatible" option is selected (normally on by default) it will show you the proper driver.
4) Select the PERC 4/DC driver and then setup your partitions the way you would like them!
From there you should be able to boot into the OS... and really have some fun.
Now you have the power... I guess the choice is yours to R2 or not to R2... that is the real question. :)
Enjoy!
Dave
Thanks and this worked for a Power edge 1800, PERC 4/DC as well. Kukan

NFS Sharing Tab is not found..NFS sharing provisioning fails with error....NFS sharing using command fails in windows 2008 r2

Hi All,
Operating System: Windows 2008 R2 Enterprise SP1
H/w: VMware virtual machine vmx 09
Installed: File server role with "Services for network file system"
Server for NFS and Client for NFS services and up and running.
But when I try to create an NFS share using the folder properties the NFS Sharing tab is missing.
I tried to provision an NFS share using server manager "New NFS share folder cannot be created"
Noticed Event ID 1015 from NFSserver " Server for NFS was unable to validate licensing information at this time, the server will be nonfunctional until this information can be validated"
Tried to create the NFS share using command line but that too failed.
Request all to kindly assist me in isolating and fixing this issue.
Thank you so much
Shaji P.K.
Server for NFS was unable to validate licensing information at this time, the server will be nonfunctional until this information can be validated

Hi All,
Operating System: Windows 2008 R2 Enterprise SP1
H/w: VMware virtual machine vmx 09
Installed: File server role with "Services for network file system"
Server for NFS and Client for NFS services and up and running.
But when I try to create an NFS share using the folder properties the NFS Sharing tab is missing.
I tried to provision an NFS share using server manager "New NFS share folder cannot be created"
Noticed Event ID 1015 from NFSserver " Server for NFS was unable to validate licensing information at this time, the server will be nonfunctional until this information can be validated"
Tried to create the NFS share using command line but that too failed.
Request all to kindly assist me in isolating and fixing this issue.
Thank you so much
Shaji P.K.
Server for NFS was unable to validate licensing information at this time, the server will be nonfunctional until this information can be validated
NFS server is so weak (especially for 2008 R2) and keeping in mind you run that all hosted by VMware ESXi the best thing you can do is to get rid of using Windows as a NFS server completely and spawn a FreeBSD or Linux VM with a decent and recent version
of Samba.
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

How to Setup Windows TFTP Server in Windows 2008 R2

Hi,
Can anyone please let me know, how to install TFTP Server in Windows 2008 R2.
I installed Windows Deployment Service to get TFTP (got this info in some forum), but I did not see TFTP Service in the Service Manager.
I am a newbie so plz let me know the steps in details.
Thanks in advance.

James, WDS ships with a TFTP server as part of the suite of services that are required to boot from the network. The information you've posted above is not correct.
Hi Aaron,
Thanks for your clarification. Towards the WDS TFTP Server, we could find the following statement below:
You use the Windows Deployment Services Trivial File Transfer Protocol (TFTP) server to download the files that are needed to do a network boot using the Pre-Boot Execution Environment (PXE).
From:
WDS TFTP Server
I understand that the we could select Deployment Server and Transport Server during the WDS setup processing. However, neoraghav would like to install TFTP server from the Server Manger towards the Windows Server 2008 R2. I noticed the statement as followed:
The TFTP client is optional software, and marked as deprecated on Windows Vista® and later versions of the Windows operating system. A TFTP server is no longer provided by Microsoft for similar security issues.
From:
Trivial File Transfer Protocol (TFTP) Overview
I should make my reply as clear as possible. Sorry for confusion. :-(
Regards,
James
James Xiong
TechNet Community Support

Windows 2008 R2 Fax Server (Ongoing issue)

I have a Windows 2008 R2 active directory, fax services work inbound through USB modem - have 50 Windows 7 clients connecting to the fax server and outbound faxing works. Here's the issue: After a few days, the clients start getting server disconnected
on the fax clients. When I go to the Server, I restart the fax services, even though no event viewer shows any error's. I do see inbound fax errors of some not received, but these are not consistent when this happens.
I restart the fax services (by restarting print spooler service), and clients still show disconnected. If I remove the account from the Windows 7 Fax client and try to add it back - I get the "You do not have security permissions to complete this
operation. Contact your fax administrator for more information".
Now, I reboot the windows 2008 R2 server and fax services work again inbound and outbound, and I can reconnect the Windows 7 Fax client that I previously removed. UAC is turned off, Domain Admins full control to Fax server permission, and domain users
have fax permissions.
This issue has happened over the last 3 weeks, I've uninstalled Fax roles, and reinstalled many times prior and followed the fax setup step by step on techarticles - like I stated, the fax services work then stop, and rebooting the server allows the faxing
to work again. This server does house Exchange 2010 SP3, but the only thing effected or having issues on this box is Fax services. Any suggestions to look?

Hi ITQ_Jhays,
Please go to Control Panel -> Printers and share the fax printer.
A similar discussion is for your reference:
I can't connect to fax server from client computers.
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 2008 R2 NFS setup issues...

Similar Messages

Maybe you are looking for