Windows 2008 R2 RADISU Server not able to authenicate Newly created AD Users on Wireless

I have a AD running on Windows 2003 R2 with Functional Level as Windows 2003 and Windows 2008 R2 serving as RADIUS Server to authenticate Wireless Users. Suddenly since a week newly created AD users are not able to connect to Wireless where as old
users have no issue.
Could anyone suggest what would be the issue.

Hi,
Which authentication method you are using? If you are using a certificate based authenticate method, you should confirm that the clients has got
the correct certificate.
In addition, is there any errors in NPS log?

Similar Messages

Windows 2008 R2 KMS server not activating Windows 8.1

We have a 2008 R2 server running VAMT 3.1 and with KB2757817 installed. I added our Windows Server 2012 and Windows 2012 R2 KMS product keys to the KMS host as well as our Windows 8.1 KMS key, and restarted the system.
So that when I look at the list of Product Keys I see the following keys:
Windows Server 2012 RTM ServerDataCenter;ServerStandard;ServerMultiPointStandard;ServerMultiPointPremium Volume:CSVLK
Win 8.1 RTM Enterprise;EnterpriseN;Professional;ProfessionalN Volume:CSVLK
Windows Server 2012 R2 RTM ServerDataCenter;ServerStandard Volume:CSVLK
Windows Server 2008 R2 RTM Std and Ent Volume:CSVLK (KMS_B)
Windows 7 All Volume Editions Volume:CSVLK
I then go to one of our Windows 8.1 systems and run the following commands:
cscript c:\windows\system32\slmgr.vbs /skms <servername>
cscript C:\windows\system32\slmgr.vbs /ato
and I get the following error message:
"Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information."
Meanwhile Windows 7 clients still activate without a problem.
On the KMS host I run slmgr /dlv and get the following:
Name: Windows Server(R), ServerStandard edition
Description: Windows Operating System - Windows Server(R), VOLUME_KMS_R2_B channel
Activation ID: xxxx
Application ID: xxx
Extended PID: xxx
Installation ID: xxx
Processor Certificate URL:
http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL:
http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxx
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 3/26/2014 9:56:25 AM
I've seen in other articles that the description should be
"VOLUME_KMS_2012-R2" channel instead of "VOLUME_KMS_R2_B channel"
My question is how do I get the 2008 R2 KMS host to activate Windows 8.1 clients?
Did I miss a step in adding the 2012 R2 KMS key, and if I did what step did I miss?

We have a 2008 R2 server running VAMT 3.1 and with KB2757817 installed. I added our Windows Server 2012 and Windows 2012 R2 KMS product keys to the KMS host as well as our Windows 8.1 KMS key, and restarted the system.
So that when I look at the list of Product Keys I see the following keys:
Windows Server 2012 RTM ServerDataCenter;ServerStandard;ServerMultiPointStandard;ServerMultiPointPremium Volume:CSVLK
Win 8.1 RTM Enterprise;EnterpriseN;Professional;ProfessionalN Volume:CSVLK
Windows Server 2012 R2 RTM ServerDataCenter;ServerStandard Volume:CSVLK
Windows Server 2008 R2 RTM Std and Ent Volume:CSVLK (KMS_B)
Windows 7 All Volume Editions Volume:CSVLK
I then go to one of our Windows 8.1 systems and run the following commands:
cscript c:\windows\system32\slmgr.vbs /skms <servername>
cscript C:\windows\system32\slmgr.vbs /ato
and I get the following error message:
"Error: 0xC004F074 The Software Licensing Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information."
Meanwhile Windows 7 clients still activate without a problem.
On the KMS host I run slmgr /dlv and get the following:
Name: Windows Server(R), ServerStandard edition
Description: Windows Operating System - Windows Server(R), VOLUME_KMS_R2_B channel
Activation ID: xxxx
Application ID: xxx
Extended PID: xxx
Installation ID: xxx
Processor Certificate URL:
http://go.microsoft.com/fwlink/?LinkID=88342
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88343
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88345
Product Key Certificate URL:
http://go.microsoft.com/fwlink/?LinkID=88344
Partial Product Key: xxxx
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 3/26/2014 9:56:25 AM
I've seen in other articles that the description should be
"VOLUME_KMS_2012-R2" channel instead of "VOLUME_KMS_R2_B channel"
My question is how do I get the 2008 R2 KMS host to activate Windows 8.1 clients?
Did I miss a step in adding the 2012 R2 KMS key, and if I did what step did I miss?
It's not possible to add Windows Vista/7/8.0/8.1 KMShost pkeys into a WindowServer OS - they will not install, because the KMShost pkey must activate the host OS as well as perform KMShost functions, and, a WindowsClientOS pkey will never be accepted on
a WindowsServerOS.
Similarly, you can't install multiple Windows pkeys - only the last (acceptable) pkey will be kept - all previous pkeys will be displaced/removed (last in wins).
Your slmgr output clearly shows that you have the WS2008R2 KMShost pkey, in place. You need to install the WS2012R2 KMshost pkey to get your 8.1 KMSclients to activate.
KMShost pkeys are "cumulative", i.e. WS2012R2 KMShost pkey will activate all lower versions of both WindowsServer and WindowsClient OS.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Not able to see newly created dummy resource object in OIM admin console.

Hi,
Created a new IT resource type and IT resource.Next created a new resource object "ResourceABC" and provided Allow all and Self Request Allowed option. However, still am able to see the resource object "ResourceABC" in the list of resources(when user selects Provision resource template) during self service or request for others.
Please let me anything I have missed during resource object creation. I guess issue is at the resource object level.
Note: It is a dummy resource object.
Thanks.

I have selected the check box for Allow All and Self Request. With regard to assign the resource by going to each organization, I believe is to provision the resource to all users in under that organization. But I want end user to request for this resource with self service console for self/others. But resource is not showing up in the list of resources.
Kindly help.
Thanks.

How to activate Windows 8.1 on a Windows 2008 R2 KMS server when I don't have Windows 2012 R2 kms host key

I only have windows 8.1 kms host key but I can't add a client OS kms key to Windows 2008 R2 kms server. And I don't have Windows 2012 R2 license either. Is there any way I can activate Windows 8.1 using my existing kms server? Thanks.

I would like a yes no clarification answer. So does this mean that EVEN WITH THE PATCH. My Server 2012 Standard edition that currently hosts KMS VA for clients running Win7, Win 8, Office15, Server 2008, Server 2012. Will not be able to host windows 8.1?
I will have to install 8.1 and use as a host?
if you have a KMShost product key for WS2012R2, you can patch a down=level Server and be fine.
(the OP didn't renew SA or otherwise has no KMShost pkey for WS2012R2)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)
I'm having similar issues and have a similar question that doesn't seem to be answered:
My KMS server is Windows 2008 R2 (Also is my domain controller). I want to activate Windows 2012 R2 and Windows 8.1 machines off this KMS server. I can install the 2012 R2 key just fine but receive error 0xC004F015 (The Software Licensing Service reported
that the license is not installed) when I try to install my 8.1 KMS key.
What I'm gathering from this thread is that I have to set up a Windows 8.1 host and set it up to be a KMS server exclusively for activating Windows 8.1. Is this correct? If so, Microsoft needs to fix that. I have a SERVER for activations for a reason: it
is a server, not a client. If I am mis-understanding, how do I get my Windows 2008 R2 server to accept the Windows 8.1 KMS key for activating 8.1 clients?
Thanks!
You don't need Windows 8.1 KMS key. Your 2012 R2 KMS key will be able to activate your Windows 8.1 machines. So your current set up is fine, no need to set up another Windows 8.1 KMS host.
My problem is I don't have 2012 R2 KMS key as I didn't buy any Windows 2012 R2 license. So I can't use 2012 R2 KMS key to activate my Windows 8.1.
Oh that's interesting. I guess I need to play around more because my 8.1 test machine isn't activating. I'll start a new thread for that if needed. Sorry for the confusion.

Installing Printers from Windows 2008 R2 printer server using the Cname

Am having issues installing printers on workstations from the windows 2008 R2 print server using the DNS names. the servername and Full qualified Name works fine.
l have tweaked the Registry and Disabled the StrictNameChecking but still getting an error. this is the message am getting...
Printer Installation Failed
You do not have enough privilege to complete the printer installation on the local machine.
I found this KB and did exactly what is in the KB but stilll....
lhttp://support.microsoft.com/kb/870911/en-us
need help

Hi.
I think I solved this yesterday. We got 1 printserver, with an alias, which we had this problem to connect to. I noticed that there is a difference between x86 and 64bits system entries in the registry...
When you are having a 64bit system, you must use REG_QWORD instead of REG_DWORD, REG_DWORD is only to be used in x86 system! See below.
Windows 2008 server R2 64-bit
HKLM\SYSTEM\CurrentControlSet\Control\Print
= ”DnsOnWire” = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters
= DisableStrictNameChecking = REG_QWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_QWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanmanServer\Parameters\
REG_SZ = OptionalNames = “aliasname” (C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Windows 2008 server x86
HKLM\SYSTEM\CurrentControlSet\Control\Print = "DnsOnWire" = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\control\print /v DnsOnWire /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\Lanmanserver\Parameters = DisableStrictNameChecking = REG_DWORD Decimal = 1
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v DisableStrictNameChecking /t REG_DWORD /d 1)
HKLM\SYSTEM\CurrentControlSet\services\LanManServer\Parameters\ REG_SZ = OptionalNames = “aliasname”
(C-name record in DNS)
(reg add hklm\system\currentcontrolset\services\lanmanserver\parameters /v OptionalNames /t REG_SZ)
Don't forget to reboot your system after these changes!
Best Regards, Mats

Windows 2008 R2 Terminal Server.

Hi,
I was wondering about running Adobe Acrobat Std X (10) on a Windows 2008 R2 Terminal Server for two users. Anyone else that have any experience with this? Best solution?
Best regards
Vegard

Although Server 2008 R2 is a supported install platform, you'll have to be extremely careful about licensing - Acrobat is not a server product, so the only person who would be legally permitted to connect to it would be the one who owns the copy of Acrobat in question. Sharing a copy between multiple users is not an option; for that there are dedicated server-based solutions such as LiveCycle.

MacBooks can't resolve printer name when sending job to windows 2008 R2 print server.

So I am work at company in a windows server 2008 r2 and we have a windows 2008 r2 printer server. Our macbook pros are not on the domain so every time we print to the server we have to type in our credentials.
MacBooks can't resolve printer name when sending job to windows 2008 R2 print server while on wifi but works when hard wired. Any thoughts? The error message I receive is "invalid printer name". I've tried adding the printer through the advanced tab in the print and scan tab of system preferences. I add it buy smb://servername/printername.
When I tried to print on the wifi at my office I get "invalid printer name" in the print job status que.
We can just do direct printing but I would like to know if anyone has had this issue before and if you could point me in the right direction. Thanks!

I assume you aare using exchange when configuring the email notifications? What I would do is just use a normal IMAP & SMTP account such as Outlook.com or if you use a POP connector for exchange, one of those accounts' SMTP settings.
For example, I have a POP connector installed and my emails are hosted at 1and1. What I would do here is put my 1and1 SMTP settings in and use these, instead of using Exchange.
Let me know if this is possible.
Ed

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone.

I am facing issues with my music on my iOS device. I have five devices connected to my apple id. And out of which a Windows Machine and iPhone is not able to sync the purchased songs on the the Windows machine and the iPhone. The iPhone4 shows the songs are not supported and on the Windows Machine the songs do not play completely. Can anyone advice what could have gone wrong ? Because rest of the devices are synced to MacBook and they are able to sync the content normally. I have even subscribed to iTunes Match but the problem is still not fixed.

Firstly... a little Clarity...
Devices refer to iDevices... iPod... iPhone... iPad. .. Not Computers.
Authoriation applies ONLY to Computers... of which there is a Limit of 5 per Apple ID.
If the issue is with iTunes on your Windows Computer... Perhaps you need to Re-install iTunes...
See Here... to Uninstall and Re-Install iTunes...
http://www.apple.com/support/itunes/install/

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
How many database will play in this role.
Best,

hello
I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
And, can you pls elaborate on this point
e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
Pls send me the details at [email protected] or you can contact me at 08054641476.
Thanks in advance.

Cisco aironet 2600 series AP configuration with windows 2008 R2 Radius server.

I want to know the configuration of Cisco aironet 2600 series AP with windows 2008 R2 Radius server.
I have
1. AD & DHCP Server
2. Cisco Aironet 2600 Access Point.
I want to connect wifi devices through this AP. Authentication should be through Radius server and AD.

Hi ,
Below link should support your requirement
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/116584-configure-wirelesslan-00.html
Minimal command : -
AP(config)# aaa new-model
AP(config)# radius-server host 172.20.0.1 auth-port 1645 acct-port 1645 key XXXXXX
AP(config)# radius-server deadtime 10
HTH
Sandy

Windows 2008 R2 File Server - user profiles appear underdirectory C:\user

I've a windows 2008 r2 file server and few day ago I've noticed that under directory c:\users some user profiles have been created.
These users don't have rdp access to this server and don't use any ts application.
Is this a problem or a normal behavior?

Hello,
IIRC this is normal behavior as they do a connect to the server to access the shared folders.
Best regards Meinolf Weber Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Can you please explain in more detail?
Why aren´t all users creating a local Profile on the fileserver?
Kind regards,
Tim
MCITP, MCTS, MCSA
http://directoryadmin.blogspot.com
This posting is provided 'AS IS' with no warranties or guarantees and confers no rights.
"If this thread answered your question, please click on "Mark as Answer"

I got another mail regarding mountain lion free upgrade program !! But its saying OS X server not able to download ?

I got another mail regarding mountain lion free upgrade program !! But its saying OS X server not able to download ?
Plz Help

You are not alone in this, Maddy. I had the same thing happen. Apple obviously sent incorrect codes that redeemed for OS X Server instead of Mountain Lion. I called Apple Care who said that it must be some server fluke and that they would get back to me within 24 hours.

How to add Windows 2012 R2 RDS to Existing Windows 2008 R2 Terminal Server

I currently have a Windows 2008 R2 Terminal Server running and I am looking to add a Windows Server 2012 R2 server to it. All I see when I google the setup is only for Windows Server 2012 R2 RDS, cant find anything to integrate with a current 2008 R2 Terminal
Server.
Can anyone help with this or point me to a blog I possibly missed?
Thanks.

Hi,
Thanks for your comment.
Yeah, agree with diramoh; as already commented. If you want user session from RDS Server 2012 R2 then you need to install RDS License role on server 2012 R2, purchase and install RDS CAL (per user or per device) according your requirement and then you
can use user session for server 2012 R2 and also for lower version.
But as you already have Server 2008 R2 RDS CAL, then with that you can simply access lower version but can’t manage Server 2012\R2.
For more information, you can refer following document.
Licensing
Windows Server 2012 R2 Remote Desktop Services
Hope it helps!
Thanks.
Dharmesh Solanki

Not able to view the created respository in ACS server

Dear All,
I am not able to restore the taken backup & even it is not showing me option which is disabled in GUI.
I have tried to restore the same though CLI.
But i am not able to view my created backup repository.
Below is the command which i used;
MMKNDACS/acsadmin# show repository ACS_BACKUP
% Protocol does not support listing directories
MMKNDACS/acsadmin#
this is error i am getting while executing.
Please help me to resolve the issue ASAP.
Thanks & regards ,
sakthivel P

MMKNDACS/acsadmin# show run
Generating configuration...
hostname MMKNDACS
service sshd
repository ACS
url ftp://190.3.166.133/
user test password hash 71a6b29f4625151a11984ddbb6fffeff0a592a4f
repository ACS_BACKUP
url tftp://10.2.152.51/ACS
repository FTP
url ftp://190.3.70.45/
user admin password hash cc14bc179d2708cc31cbc21ee6a679cd22c095ae
repository TEST
url ftp://190.3.70.45
user test password hash 97dc37c94236ec1b4c56871c2e482cbd6f56bd33
repository upgrade
url ftp://190.3.70.45/
user admin password hash cc14bc179d2708cc31cbc21ee6a679cd22c095ae
logging localhost
logging loglevel 6
kron policy-list policyList_acs
cli acs scheduled_backup acs repository ACS_BACKUP
kron occurrence occurrence_acs
at 22:00
recurring
policy-list policyList_acs
icmp echo on

Windows 2008 R2 RADISU Server not able to authenicate Newly created AD Users on Wireless

Similar Messages

Maybe you are looking for